Jacques,
It would appear that slmodem-2.9.11-20100718.tar.gz and
ungrab-winmodem-20090716.tar.gz would support this modem.
OR/
install sl-modem-source via apt-get and take advantage of dkms for
automagical kernel updates/etc. Marv would provide these directions.
Predictive diagnostics for card in bus 03:00.0:
Modem chipset detected on
NAME="Modem: Smart Link Ltd. SmartPCI2800 V.92 PCI Soft DFT "
CLASS=0703
PCIDEV=2000:2800
SUBSYS=163c:2801
IRQ=16
HDA2=00:1b.0
IDENT=slamr
For candidate modem in: 03:00.0
0703 Modem: Smart Link Ltd. SmartPCI2800 V.92 PCI Soft DFT
Primary device ID: 2000:2800
Support type needed or chipset: slamr
Writing DOCs/Intel.txt
The modem is supported by the Smartlink
plus the slmodemd helper utility. Read the
DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through guidance.
For 2.6.32-24-generic compiling drivers is necessary. As of October
2007 the current packages at
http://linmodems.technion.ac.il/packages/smartlink/ are the
ungrab-winmodem-20070505.tar.gz and slmodem-2.9.11-20080126.tar.gz
Download:
http://linmodems.technion.ac.il/packages/smartlink/slmodem-2.9.11-20100718.tar.gz
and
http://linmodems.technion.ac.il/packages/smartlink/ungrab-winmodem-20090716.tar.gz
copy them to linux partition
$ tar -zxvf slmodem-2.9.11-20100718.tar.gz
$ cd slmodem-2.9.11-2010718
$ make KERNEL_DIR=/lib/modules/2.6.32-24-generic/build
$ make
$ su -c 'make install'
or
$ sudo 'make install'
$ cd ..
$ tar -zxvf ungrab-winmodem-20090716.tar.gz
$ cd ungrab-winmodem-20090716
$ sudo make
$ sudo make install
$ sudo modprobe ungrab-winmodem
$ sudo modprobe slamr
$ slmodemd -c YOUR_COUNTRY /dev/slamr0
then open up another terminal and type
$ sudo wvdialconf /etc/wvdial.conf
edit the resultant file /etc/wvdial.conf removing ";" and adding a
line Carrier Check = no to it. then trying to connect.
HTH,
Antonio
On Wed, Aug 4, 2010 at 3:42 PM, Jacques Goldberg
<Jacques.Goldberg@xxxxxxx> wrote:
>
>
> Trying to help a friend, am not sure.
>
> Which driver file supports this?
>
> Thanks
>
> Jacques
>
>
