[Fwd: Jonathan Beiler, U.S, kernel 2.6.31-22-generic]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




--- Begin Message ---
Following is the contents of the modem.txt file.  Any help on getting ubuntu to recognize my modem would be greatly appreciated.  Many thanks, Jonathan Beiler.


 Only plain text email is forwarded by the  Discuss@xxxxxxxxxxxxx List Server,
 as HTML can contain viruses. Use as the email Subject Line:
           YourName, YourCountry  kernel 2.6.31-22-generic
 With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
 YourCountry will enable Country specific guidance. Linux experts in YourCountry
 can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
 So in a day, also check the Archived responses at http://www.linmodems.org
--------------------------  System information ----------------------------
CPU=i686,  Ubuntu ,  ALSA_version=1.0.20
Linux version 2.6.31-22-generic (buildd@vernadsky) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #60-Ubuntu SMP Thu May 27 00:22:23 UTC 2010
 scanModem update of:  2010_05_29

Distrib_ID=Ubuntu
DistribCodeName=karmic
AptRepositoryStem=http://us.archive.ubuntu.com/ubuntu/


The dkms driver upgrade utilities are installed,

 There are no blacklisted modem drivers in /etc/modprobe*  files

 Potentially useful modem drivers now loaded are:
       snd_hda_intel           

Attached USB devices are:
 ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is:  http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html

If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx

Candidate PCI devices with modem chips are:
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
High Definition Audio cards can host modem chips.

For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
 PCI slot    PCI ID        SubsystemID    Name
 ----------    ---------    ---------    --------------
 00:1b.0    8086:284b    103c:3618    Audio device: Intel Corporation 82801H

 Modem interrupt assignment and sharing:
 16:        928   IO-APIC-fasteoi   uhci_hcd:usb3, HDA Intel
 --- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[    0.173897] pci 0000:00:1b.0: reg 10 64bit mmio: [0xe4624000-0xe4627fff]
[    0.173966] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.173971] pci 0000:00:1b.0: PME# disabled
[   17.448616] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[   17.448631] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   17.448675] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   17.518672] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6

 The PCI slot 00:1b.0 of the modem card may be disabled early in
 a bootup process,  but then enabled later. If modem drivers load
 but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
 Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
 if help is needed.
 


===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.

The modem cards detected by "aplay -l"  are: None


The /proc/asound/pcm file reports:
-----------------------
00-00: AD198x Analog : AD198x Analog : playback 1 : capture 1

about /proc/asound/cards:
------------------------
 0 [Intel          ]: HDA-Intel - HDA Intel
                      HDA Intel at 0xe4624000 irq 16

 PCI slot 00:1b.0 has a High Definition Audio Card
 The drivers are in the kernel modules tree at:
 /lib/modules/2.6.31-22-generic/kernel/sound/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.31-14-generic/kernel/sound/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.31-16-generic/kernel/sound/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.31-20-generic/kernel/sound/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.31-17-generic/kernel/sound/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.31-21-generic/kernel/sound/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.31-19-generic/kernel/sound/pci/hda/snd-hda-intel.ko
 The modem codec file for the HDA card is: /proc/asound/card0/codec#1
--------------------------------------------------------
Codec: LSI ID 1040
Address: 1
Function Id: 0x2
Vendor Id: 0x11c11040
Subsystem Id: 0x103c1378
Revision Id: 0x100200
Modem Function Group: 0x1

 The audio card hosts a softmodem chip:  0x11c11040

The softmodem chip 11c11040 is hosted on the Subsytem of the High Definition Audio card,
and is supported by the AgereSystems/LSI driver pair agrmodem + agrserial, which is provided by
the most current package agrsm-11c11040-version at http://linmodems.technion.ac.il/packages/ltmodem/11c11040/

If not a Conexant modem, the driver agrsm with its dependent drivers:

----------
provide audio + modem support with the modem chip residing on the subsystem.
Any particular card can host any one of several soft modem chips.

=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

Predictive  diagnostics for card in bus 00:1b.0:
    Modem chipset  detected on
NAME="Audio device: Intel Corporation 82801H "
CLASS=0403
PCIDEV=8086:284b
SUBSYS=103c:3618
IRQ=16
HDA2=00:1b.0
SOFT=8086:284b.HDA
HDAchipVendorID=11c1
CHIP=0x11c11040
IDENT=agrsm
Driver=agrsm
package=agrsm-11c11040

 For candidate modem in:  00:1b.0
   0403 Audio device: Intel Corporation 82801H
      Primary device ID:  8086:284b
    Subsystem PCI_id  103c:3618
    Softmodem codec or chipset from diagnostics: 0x11c11040
                               from    Archives:
                        The HDA card softmodem chip is 0x11c11040
      

Support type needed or chipset:    agrsm


Writing DOCs/Intel.txt

The AgereSystems/LSI agrsm code supports compiling of a agrmodem + agrserial driver pair.
There are a few different chipsets which use this driver pair, but they use different code resources:
Chipsets            KV*    PackageNames (most current as of November 2009)
----------------------------------------------------------------------------------------------
11c1:048c and 11c1:048f         2.6.29    agrsm048pci-2.1.60_20100108_i386.deb or agrsm048pci-2.1.60_20100108.tar.gz
11c1:0620                       2.6.31  agrsm06pci-2.1.80_20100106_i386.deb or agrsm06pci-2.1.80~20100106.tar.gz !!
11c11040 (on HDA audio cards)   2.6.31  agrsm-11c11040_20091225_i386.deb or agrsm-11c11040-2.1.80~20091225.tar.bz2  !!
   All available at: http://linmodems.technion.ac.il/packages/ltmodem/11c11040/   
Additionally there are;
automation & testing                    agrsm-tools_0.0.1_all.deb or agrsm-tools-0.0.1-2.noarch.rpm
General background                      agrsm_howto.txt
------------------------------------------------------------------------------------------------
* KV == latest kernel release with a reported success
!! Latest update with major credit to  Nikolay Zhuravlev
   But see conflict issue: http://linmodems.technion.ac.il/bigarch/archive-nineth/msg02753.html
   For the 11c11040 chip with kernels 2.6.31 and later a change in a modules loading settingmay be necessary.
   Within the file /etc/modprobe.d/alsa-base.conf  (or equivalent for your Distro), change the phrase:
      options snd-hda-intel power_save=10
   to:
      options snd-hda-intel power_save=0
   or the agrsm drivers will not function. For Ubuntu related systems this can be done with:
   $ sudo gedit /etc/modprobe.d/alsa-base.conf

Report from  Bjorn Wielens:
Please note- trying to load the modules on a OpenSuSE 11.2 system gives
 an error about the module_version symbol. Using:
# modprobe --force agrmodem
# modprobe --force agrserial
is necessary to load the drivers, and does not appear to cause ill effects.


All of the above packages are dkms competent.  This means that if your Linux distros dkms package
is previously installed, if provides for future updates matching forthcoming kernels.

-------------- end Agere Systems section -------------------

 Completed candidate modem analyses.

 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.4.1
             and the compiler used in kernel assembly: 4.4.1


 
 Minimal compiling resources appear complete:
   make utility - /usr/bin/make
   Compiler version 4.4
   linuc_headers base folder /lib/modules/2.6.31-22-generic/build

 However some compilations and executable functions may need additional files,
 in the FileNames.h (so called kernel "h"eaders) collection installed in  /usr/include/ .
 For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
 Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
 In not included on your install CD, search for them at http://packages.ubuntu.com
 or comparable Repository for other Linux distros.
 When compiling ALSA drivers, the utility "patch" will also be needed.




If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb

Checking settings of:    /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

For guidance on FAX usage, get from http://linmodems.technion.ac.il/packages/  get faxing.tar.gz
It has samples for a modem using port /dev/ttySL0, which must be changed to match your modem's port.

Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 eth2
Which can interfere with Browser naviagation.

 Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================

 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:   
slmodemd created symbolic link /dev/ttySL0:  
     Within /etc/udev/ files:

     Within /etc/modprobe.conf files:
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------


--- End Message ---

[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux