Mohammad, If you get that error message, try the following sequence $ sudo modprobe ungrab-winmodem $ sudo modprobe slamr $ sudo mkdir -p /dev $ sudo mknod -m 600 /dev/slamr0 c 242 0 Then do $ sudo slmodemd -c USA /dev/slamr0 If this fails, please post again. For automation, [to avoid typing this everytime you want to connect, there is a sl-modem-daemon native to ubuntu/debian distros]. Sorry I don't know how it works in Ubuntu/Debian, otherwise I would explain a bit more. https://help.ubuntu.com/community/DialupModemHowto/Smartlink It is a bit outdated, but you need to search for sl-modem-daemon and install it. Regards, Antonio On 7/20/10, Mohammad Shabani M. <foxtuts@xxxxxxxxx> wrote: > dosnt work! > help me! > > Are you using same username, > password. and ISP phone that you have successfully used before? yes. > > > _________________________________________________________ > > mohammad@FoXtUtS:~$ cd ~/ungrab-winmodem-20090716 > mohammad@FoXtUtS:~/ungrab-winmodem-20090716$ sudo modprobe ungrab-winmodem > mohammad@FoXtUtS:~/ungrab-winmodem-20090716$ sudo modprobe slamr > mohammad@FoXtUtS:~/ungrab-winmodem-20090716$ sudo slmodemd -c USA > /dev/slamr0 > error: mdm setup: cannot stat `/dev/slamr0': No such file or directory > error: cannot setup device `/dev/slamr0' > mohammad@FoXtUtS:~/ungrab-winmodem-20090716$ > > ___________________________________________________________ > > > > > > On 7/20/2010 7:20 PM, Antonio Olivares wrote: >> Mohammad, >> >> When you restart Ubuntu, you would need to repeat these commands to >> get connected: >> >> mohammad@FoXtUtS:~/ungrab-winmodem-20090716$ sudo modprobe ungrab-winmodem >> mohammad@FoXtUtS:~/ungrab-winmodem-20090716$ sudo modprobe slamr >> mohammad@FoXtUtS:~/ungrab-winmodem-20090716$ sudo slmodemd -c USA >> /dev/slamr0 >> >> Then >> mohammad@FoXtUtS:~/ungrab-winmodem-20090716$ sudo wvdial >> >> What makes me wonder is the following: >> CONNECT 49333 >> User Access Verification >> Username: >> --> Carrier detected. Waiting for prompt. >> Username: >> Username: >> --> Looks like a login prompt. >> --> Sending: d4538542t >> d4538542t >> Password: >> --> Looks like a password prompt. >> --> Sending: (password) >> % Authentication failed. >> NO CARRIER >> --> Don't know what to do! Starting pppd and hoping for the best. >> --> Starting pppd at Tue Jul 20 18:46:48 2010 >> --> Pid of pppd: 7064 >> --> Using interface ppp0 >> --> pppd: (�l @�l >> --> pppd: (�l @�l >> --> pppd: (�l @�l >> --> pppd: (�l @�l >> --> pppd: (�l @�l >> --> Disconnecting at Tue Jul 20 18:47:19 2010 >> --> The PPP daemon has died: A modem hung up the phone (exit code = 16) >> >> You have "Carrier Check = no" in /etc/wvdial.conf and you get NO >> CARRIER, you can't seem to connect :(, Are you using same username, >> password. and ISP phone that you have successfully used before? >> >> If you have, try adding >> "Stupid Mode = yes" >> to /etc/wvdial.conf >> >> and see if it makes a difference? If this fails, let us know. >> >> Regards, >> >> Antonio >> >> On 7/20/10, Mohammad Shabani M.<foxtuts@xxxxxxxxx> wrote: >>> ___install__________________________________________________________________ >>> mohammad@FoXtUtS:~$ tar -zxvf slmodem-2.9.11-20100613.tar.gz >>> slmodem-2.9.11-20100613/ >>> slmodem-2.9.11-20100613/patches/ >>> slmodem-2.9.11-20100613/patches/alsa-linux-2.6.0.patch >>> slmodem-2.9.11-20100613/patches/zello.txt >>> slmodem-2.9.11-20100613/patches/no_slusb.patch >>> slmodem-2.9.11-20100613/patches/sldiffs-20090222/ >>> slmodem-2.9.11-20100613/patches/sldiffs-20090222/03_Makefile_2.6.12.4.diff >>> slmodem-2.9.11-20100613/patches/sldiffs-20090222/fortify_source.diff >>> slmodem-2.9.11-20100613/patches/sldiffs-20090222/Readme.txt >>> slmodem-2.9.11-20100613/patches/sldiffs-20090222/kernel-ver.diff >>> slmodem-2.9.11-20100613/patches/sldiffs-20090222/06_slmodem-class-simple-to-class-meins.diff >>> slmodem-2.9.11-20100613/patches/sldiffs-20090222/README.diff >>> slmodem-2.9.11-20100613/patches/sldiffs-20090222/05_st7554_license.diff >>> slmodem-2.9.11-20100613/patches/sldiffs-20090222/class_device.diff >>> slmodem-2.9.11-20100613/patches/sldiffs-20090222/02_dial_string_size.diff >>> slmodem-2.9.11-20100613/patches/no_slusb.txt >>> slmodem-2.9.11-20100613/patches/marv.diff >>> slmodem-2.9.11-20100613/patches/zello.diff >>> slmodem-2.9.11-20100613/patches/marv.txt >>> slmodem-2.9.11-20100613/patches/modem_20100303.patch >>> slmodem-2.9.11-20100613/patches/slmodem-2.9.11-20090222.patch >>> slmodem-2.9.11-20100613/patches/slmodem-usb-2.6.16.patch >>> slmodem-2.9.11-20100613/drivers/ >>> slmodem-2.9.11-20100613/drivers/amrmo_init.c.orig >>> slmodem-2.9.11-20100613/drivers/DEADJOE >>> slmodem-2.9.11-20100613/drivers/old_st7554.c >>> slmodem-2.9.11-20100613/drivers/kernel-ver.c >>> slmodem-2.9.11-20100613/drivers/Module.markers >>> slmodem-2.9.11-20100613/drivers/amrlibs.o >>> slmodem-2.9.11-20100613/drivers/amrmo_init.c >>> slmodem-2.9.11-20100613/drivers/Modules.symvers >>> slmodem-2.9.11-20100613/drivers/Makefile >>> slmodem-2.9.11-20100613/drivers/.#kernel-ver.c >>> slmodem-2.9.11-20100613/drivers/st7554.c >>> slmodem-2.9.11-20100613/drivers/sysdep_amr.c >>> slmodem-2.9.11-20100613/drivers/modules.order >>> slmodem-2.9.11-20100613/drivers/Module.symvers >>> slmodem-2.9.11-20100613/drivers/makefile.0 >>> slmodem-2.9.11-20100613/Changes >>> slmodem-2.9.11-20100613/scripts/ >>> slmodem-2.9.11-20100613/scripts/slmodem.spec >>> slmodem-2.9.11-20100613/scripts/slmodemd.ubuntu.italy >>> slmodem-2.9.11-20100613/scripts/mandrake/ >>> slmodem-2.9.11-20100613/scripts/mandrake/slmodemd >>> slmodem-2.9.11-20100613/scripts/debian/ >>> slmodem-2.9.11-20100613/scripts/debian/slmodemd >>> slmodem-2.9.11-20100613/scripts/slmodemd >>> slmodem-2.9.11-20100613/scripts/suse/ >>> slmodem-2.9.11-20100613/scripts/suse/slmodemd.SUSE >>> slmodem-2.9.11-20100613/scripts/suse/slmodemd.conf >>> slmodem-2.9.11-20100613/scripts/slackware/ >>> slmodem-2.9.11-20100613/scripts/slackware/rc.slmodemd >>> slmodem-2.9.11-20100613/scripts/slackware/README >>> slmodem-2.9.11-20100613/Documentation/ >>> slmodem-2.9.11-20100613/Documentation/ALSA_support.txt >>> slmodem-2.9.11-20100613/Documentation/Smartlink.txt >>> slmodem-2.9.11-20100613/Documentation/compile_example.txt >>> slmodem-2.9.11-20100613/Documentation/x86_64.txt >>> slmodem-2.9.11-20100613/modem/ >>> slmodem-2.9.11-20100613/modem/modem_param.c >>> slmodem-2.9.11-20100613/modem/modem_timer.h >>> slmodem-2.9.11-20100613/modem/modem_debug.h >>> slmodem-2.9.11-20100613/modem/modem_defs.h >>> slmodem-2.9.11-20100613/modem/modem.c >>> slmodem-2.9.11-20100613/modem/modem_test.c >>> slmodem-2.9.11-20100613/modem/modem_dp.h >>> slmodem-2.9.11-20100613/modem/modem_cmdline.c >>> slmodem-2.9.11-20100613/modem/modem_homolog.h >>> slmodem-2.9.11-20100613/modem/modem_comp.c >>> slmodem-2.9.11-20100613/modem/Makefile.20080401 >>> slmodem-2.9.11-20100613/modem/modem_ec.c >>> slmodem-2.9.11-20100613/modem/dp_sinus.c >>> slmodem-2.9.11-20100613/modem/homolog_data.c >>> slmodem-2.9.11-20100613/modem/modem_param.h >>> slmodem-2.9.11-20100613/modem/modem_main.c >>> slmodem-2.9.11-20100613/modem/modem_pack.c >>> slmodem-2.9.11-20100613/modem/modem_datafile.c >>> slmodem-2.9.11-20100613/modem/sysdep_common.c >>> slmodem-2.9.11-20100613/modem/dp_dummy.c >>> slmodem-2.9.11-20100613/modem/Makefile >>> slmodem-2.9.11-20100613/modem/modem_timer.c >>> slmodem-2.9.11-20100613/modem/modem_at.c >>> slmodem-2.9.11-20100613/modem/modem_debug.c >>> slmodem-2.9.11-20100613/modem/dsplibs.o >>> slmodem-2.9.11-20100613/modem/modem.h >>> slmodem-2.9.11-20100613/COPYING >>> slmodem-2.9.11-20100613/faxing/ >>> slmodem-2.9.11-20100613/faxing/xtel.diff >>> slmodem-2.9.11-20100613/faxing/smartlink.pdf >>> slmodem-2.9.11-20100613/faxing/1stRead.txt >>> slmodem-2.9.11-20100613/faxing/modem.sh >>> slmodem-2.9.11-20100613/faxing/xtel.lignes >>> slmodem-2.9.11-20100613/faxing/modem >>> slmodem-2.9.11-20100613/faxing/sm56_initstrings >>> slmodem-2.9.11-20100613/faxing/wvdial.conf >>> slmodem-2.9.11-20100613/README >>> slmodem-2.9.11-20100613/Makefile >>> mohammad@FoXtUtS:~$ cd slmodem-2.9.11-20100613 >>> mohammad@FoXtUtS:~/slmodem-2.9.11-20100613$ make >>> /=/lib/modules/2.6.32-21-generic/build >>> make -C modem all >>> make[1]: Entering directory >>> `/home/mohammad/slmodem-2.9.11-20100613/modem' >>> rebuild profile... >>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_main.o -c modem_main.c >>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_cmdline.o -c >>> modem_cmdline.c >>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem.o -c modem.c >>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_datafile.o -c >>> modem_datafile.c >>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_at.o -c modem_at.c >>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_timer.o -c >>> modem_timer.c >>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_pack.o -c modem_pack.c >>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_ec.o -c modem_ec.c >>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_comp.o -c modem_comp.c >>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_param.o -c >>> modem_param.c >>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_debug.o -c >>> modem_debug.c >>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o homolog_data.o -c >>> homolog_data.c >>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o dp_sinus.o -c dp_sinus.c >>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o dp_dummy.o -c dp_dummy.c >>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o sysdep_common.o -c >>> sysdep_common.c >>> gcc -o slmodemd modem_main.o modem_cmdline.o modem.o modem_datafile.o >>> modem_at.o modem_timer.o modem_pack.o modem_ec.o modem_comp.o >>> modem_param.o modem_debug.o homolog_data.o dp_sinus.o dp_dummy.o >>> dsplibs.o sysdep_common.o >>> gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -o modem_test.o -c modem_test.c >>> modem_test.c: In function ‘modem_test_start’: >>> modem_test.c:110: warning: ignoring return value of ‘write’, declared >>> with attribute warn_unused_result >>> gcc -o modem_test modem_test.o modem_cmdline.o modem.o modem_datafile.o >>> modem_at.o modem_timer.o modem_pack.o modem_ec.o modem_comp.o >>> modem_param.o modem_debug.o homolog_data.o dp_sinus.o dp_dummy.o >>> dsplibs.o sysdep_common.o >>> make[1]: Leaving directory `/home/mohammad/slmodem-2.9.11-20100613/modem' >>> make -C drivers KERNEL_DIR=/lib/modules/2.6.32-21-generic/build >>> make[1]: Entering directory >>> `/home/mohammad/slmodem-2.9.11-20100613/drivers' >>> doing kernel-ver:: >>> cc -I/lib/modules/2.6.32-21-generic/build/include -o kernel-ver >>> kernel-ver.c >>> make all KERNEL_VER=2.6.32-21-generic >>> make[2]: Entering directory >>> `/home/mohammad/slmodem-2.9.11-20100613/drivers' >>> obj-m=slamr.o >>> slamr-objs=amrmo_init.o sysdep_amr.o amrlibs.o >>> make modules -C /lib/modules/2.6.32-21-generic/build >>> SUBDIRS=/home/mohammad/slmodem-2.9.11-20100613/drivers >>> make[3]: Entering directory `/usr/src/linux-headers-2.6.32-21-generic' >>> CC [M] /home/mohammad/slmodem-2.9.11-20100613/drivers/amrmo_init.o >>> CC [M] /home/mohammad/slmodem-2.9.11-20100613/drivers/sysdep_amr.o >>> LD [M] /home/mohammad/slmodem-2.9.11-20100613/drivers/slamr.o >>> Building modules, stage 2. >>> MODPOST 1 modules >>> WARNING: could not find >>> /home/mohammad/slmodem-2.9.11-20100613/drivers/.amrlibs.o.cmd for >>> /home/mohammad/slmodem-2.9.11-20100613/drivers/amrlibs.o >>> CC /home/mohammad/slmodem-2.9.11-20100613/drivers/slamr.mod.o >>> LD [M] /home/mohammad/slmodem-2.9.11-20100613/drivers/slamr.ko >>> make[3]: Leaving directory `/usr/src/linux-headers-2.6.32-21-generic' >>> finished all: >>> make[2]: Leaving directory >>> `/home/mohammad/slmodem-2.9.11-20100613/drivers' >>> make[1]: Leaving directory >>> `/home/mohammad/slmodem-2.9.11-20100613/drivers' >>> mohammad@FoXtUtS:~/slmodem-2.9.11-20100613$ make >>> make -C modem all >>> make[1]: Entering directory >>> `/home/mohammad/slmodem-2.9.11-20100613/modem' >>> make[1]: Leaving directory `/home/mohammad/slmodem-2.9.11-20100613/modem' >>> make -C drivers KERNEL_DIR=/lib/modules/2.6.32-21-generic/build >>> make[1]: Entering directory >>> `/home/mohammad/slmodem-2.9.11-20100613/drivers' >>> doing kernel-ver:: >>> cc -I/lib/modules/2.6.32-21-generic/build/include -o kernel-ver >>> kernel-ver.c >>> make all KERNEL_VER=2.6.32-21-generic >>> make[2]: Entering directory >>> `/home/mohammad/slmodem-2.9.11-20100613/drivers' >>> obj-m=slamr.o >>> slamr-objs=amrmo_init.o sysdep_amr.o amrlibs.o >>> make modules -C /lib/modules/2.6.32-21-generic/build >>> SUBDIRS=/home/mohammad/slmodem-2.9.11-20100613/drivers >>> make[3]: Entering directory `/usr/src/linux-headers-2.6.32-21-generic' >>> Building modules, stage 2. >>> MODPOST 1 modules >>> WARNING: could not find >>> /home/mohammad/slmodem-2.9.11-20100613/drivers/.amrlibs.o.cmd for >>> /home/mohammad/slmodem-2.9.11-20100613/drivers/amrlibs.o >>> make[3]: Leaving directory `/usr/src/linux-headers-2.6.32-21-generic' >>> finished all: >>> make[2]: Leaving directory >>> `/home/mohammad/slmodem-2.9.11-20100613/drivers' >>> make[1]: Leaving directory >>> `/home/mohammad/slmodem-2.9.11-20100613/drivers' >>> mohammad@FoXtUtS:~/slmodem-2.9.11-20100613$ sudo make install >>> make -C modem all >>> make[1]: Entering directory >>> `/home/mohammad/slmodem-2.9.11-20100613/modem' >>> make[1]: Leaving directory `/home/mohammad/slmodem-2.9.11-20100613/modem' >>> make -C drivers KERNEL_DIR=/lib/modules/2.6.32-21-generic/build >>> make[1]: Entering directory >>> `/home/mohammad/slmodem-2.9.11-20100613/drivers' >>> doing kernel-ver:: >>> cc -I/lib/modules/2.6.32-21-generic/build/include -o kernel-ver >>> kernel-ver.c >>> make all KERNEL_VER=2.6.32-21-generic >>> make[2]: Entering directory >>> `/home/mohammad/slmodem-2.9.11-20100613/drivers' >>> obj-m=slamr.o >>> slamr-objs=amrmo_init.o sysdep_amr.o amrlibs.o >>> make modules -C /lib/modules/2.6.32-21-generic/build >>> SUBDIRS=/home/mohammad/slmodem-2.9.11-20100613/drivers >>> make[3]: Entering directory `/usr/src/linux-headers-2.6.32-21-generic' >>> Building modules, stage 2. >>> MODPOST 1 modules >>> WARNING: could not find >>> /home/mohammad/slmodem-2.9.11-20100613/drivers/.amrlibs.o.cmd for >>> /home/mohammad/slmodem-2.9.11-20100613/drivers/amrlibs.o >>> make[3]: Leaving directory `/usr/src/linux-headers-2.6.32-21-generic' >>> finished all: >>> make[2]: Leaving directory >>> `/home/mohammad/slmodem-2.9.11-20100613/drivers' >>> make[1]: Leaving directory >>> `/home/mohammad/slmodem-2.9.11-20100613/drivers' >>> make install -C drivers KERNEL_DIR=/lib/modules/2.6.32-21-generic/build >>> make[1]: Entering directory >>> `/home/mohammad/slmodem-2.9.11-20100613/drivers' >>> doing kernel-ver:: >>> cc -I/lib/modules/2.6.32-21-generic/build/include -o kernel-ver >>> kernel-ver.c >>> mkdir -p /dev >>> mknod -m 600 /dev/slamr0 c 242 0 ; mknod -m 600 /dev/slamr1 c 242 1 ; >>> mknod -m 600 /dev/slamr2 c 242 2 ; mknod -m 600 /dev/slamr3 c 242 3 ; >>> echo -n >>> make install KERNEL_VER=2.6.32-21-generic >>> make[2]: Entering directory >>> `/home/mohammad/slmodem-2.9.11-20100613/drivers' >>> install -D -m 644 slamr.ko /lib/modules/2.6.32-21-generic/extra/slamr.ko >>> /sbin/depmod -a >>> make[2]: Leaving directory >>> `/home/mohammad/slmodem-2.9.11-20100613/drivers' >>> make[1]: Leaving directory >>> `/home/mohammad/slmodem-2.9.11-20100613/drivers' >>> install -D -m 755 modem/slmodemd /usr/sbin/slmodemd >>> rm -f -rf /var/lib/slmodem >>> install -d -D -m 755 /var/lib/slmodem >>> mohammad@FoXtUtS:~/slmodem-2.9.11-20100613$ cd .. >>> mohammad@FoXtUtS:~$ tar -zxvf ungrab-winmodem-20090716.tar.gz >>> ungrab-winmodem-20090716/ >>> ungrab-winmodem-20090716/Makefile >>> ungrab-winmodem-20090716/updates.txt >>> ungrab-winmodem-20090716/ungrab-winmodem.c >>> ungrab-winmodem-20090716/Modules.symvers >>> ungrab-winmodem-20090716/Module.symvers >>> ungrab-winmodem-20090716/Module.markers >>> ungrab-winmodem-20090716/Readme.txt >>> ungrab-winmodem-20090716/modules.order >>> mohammad@FoXtUtS:~$ cd ungrab-winmodem-20090716 >>> mohammad@FoXtUtS:~/ungrab-winmodem-20090716$ sudo make clean >>> rm -f *.o *.ko *.mod.* .*.cmd *~ >>> rm -f -r .tmp_versions >>> mohammad@FoXtUtS:~/ungrab-winmodem-20090716$ sudo make >>> make modules -C /lib/modules/2.6.32-21-generic/build >>> SUBDIRS=/home/mohammad/ungrab-winmodem-20090716 >>> make[1]: Entering directory `/usr/src/linux-headers-2.6.32-21-generic' >>> CC [M] /home/mohammad/ungrab-winmodem-20090716/ungrab-winmodem.o >>> Building modules, stage 2. >>> MODPOST 1 modules >>> CC /home/mohammad/ungrab-winmodem-20090716/ungrab-winmodem.mod.o >>> LD [M] /home/mohammad/ungrab-winmodem-20090716/ungrab-winmodem.ko >>> make[1]: Leaving directory `/usr/src/linux-headers-2.6.32-21-generic' >>> mohammad@FoXtUtS:~/ungrab-winmodem-20090716$ sudo make install >>> make modules -C /lib/modules/2.6.32-21-generic/build >>> SUBDIRS=/home/mohammad/ungrab-winmodem-20090716 >>> make[1]: Entering directory `/usr/src/linux-headers-2.6.32-21-generic' >>> Building modules, stage 2. >>> MODPOST 1 modules >>> make[1]: Leaving directory `/usr/src/linux-headers-2.6.32-21-generic' >>> install -D -m 644 ungrab-winmodem.ko >>> /lib/modules/2.6.32-21-generic/extra/ungrab-winmodem.ko >>> /sbin/depmod -a >>> mohammad@FoXtUtS:~/ungrab-winmodem-20090716$ sudo modprobe >>> ungrab-winmodem >>> mohammad@FoXtUtS:~/ungrab-winmodem-20090716$ sudo modprobe slamr >>> mohammad@FoXtUtS:~/ungrab-winmodem-20090716$ sudo slmodemd -c USA >>> /dev/slamr0 >>> SmartLink Soft Modem: version 2.9.11 Jul 20 2010 18:24:39 >>> symbolic link `/dev/ttySL0' -> `/dev/pts/1' created. >>> modem `slamr0' created. TTY is `/dev/pts/1' >>> Use `/dev/ttySL0' as modem device, Ctrl+C for termination. >>> >>> >>> >>> >>> ____________in new >>> terminal___________________________________________________ >>> mohammad@FoXtUtS:~$ sudo wvdialconf /etc/wvdial.conf >>> [sudo] password for mohammad: >>> Editing `/etc/wvdial.conf'. >>> >>> Scanning your serial ports for a modem. >>> >>> ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud >>> ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud >>> ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. >>> ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud >>> ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud >>> ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. >>> Modem Port Scan<*1>: S2 S3 >>> WvModem<*1>: Cannot get information for serial port. >>> ttySL0<*1>: ATQ0 V1 E1 -- OK >>> ttySL0<*1>: ATQ0 V1 E1 Z -- OK >>> ttySL0<*1>: ATQ0 V1 E1 S0=0 -- OK >>> ttySL0<*1>: ATQ0 V1 E1 S0=0&C1 -- OK >>> ttySL0<*1>: ATQ0 V1 E1 S0=0&C1&D2 -- OK >>> ttySL0<*1>: ATQ0 V1 E1 S0=0&C1&D2 +FCLASS=0 -- OK >>> ttySL0<*1>: Modem Identifier: ATI -- SmartLink Soft Modem >>> ttySL0<*1>: Speed 4800: AT -- OK >>> ttySL0<*1>: Speed 9600: AT -- OK >>> ttySL0<*1>: Speed 19200: AT -- OK >>> ttySL0<*1>: Speed 38400: AT -- OK >>> ttySL0<*1>: Speed 57600: AT -- OK >>> ttySL0<*1>: Speed 115200: AT -- OK >>> ttySL0<*1>: Speed 230400: AT -- OK >>> ttySL0<*1>: Speed 460800: AT -- OK >>> ttySL0<*1>: Max speed is 460800; that should be safe. >>> ttySL0<*1>: ATQ0 V1 E1 S0=0&C1&D2 +FCLASS=0 -- OK >>> >>> Found a modem on /dev/ttySL0. >>> Modem configuration written to /etc/wvdial.conf. >>> ttySL0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0&C1&D2 +FCLASS=0" >>> mohammad@FoXtUtS:~$ sudo gedit /etc/wvdial.conf >>> mohammad@FoXtUtS:~$ wvdial >>> --> WvDial: Internet dialer version 1.60 >>> --> Cannot open /dev/ttySL0: Permission denied >>> --> Cannot open /dev/ttySL0: Permission denied >>> --> Cannot open /dev/ttySL0: Permission denied >>> mohammad@FoXtUtS:~$ sudo wvdial >>> --> WvDial: Internet dialer version 1.60 >>> --> Cannot get information for serial port. >>> --> Initializing modem. >>> --> Sending: ATZ >>> ATZ >>> OK >>> --> Sending: ATQ0 V1 E1 S0=0&C1&D2 +FCLASS=0 >>> ATQ0 V1 E1 S0=0&C1&D2 +FCLASS=0 >>> OK >>> --> Modem initialized. >>> --> Sending: ATDT3239998 >>> --> Waiting for carrier. >>> ATDT3239998 >>> CONNECT 49333 >>> User Access Verification >>> Username: >>> --> Carrier detected. Waiting for prompt. >>> Username: >>> Username: >>> --> Looks like a login prompt. >>> --> Sending: d4538542t >>> d4538542t >>> Password: >>> --> Looks like a password prompt. >>> --> Sending: (password) >>> % Authentication failed. >>> NO CARRIER >>> --> Don't know what to do! Starting pppd and hoping for the best. >>> --> Starting pppd at Tue Jul 20 18:46:48 2010 >>> --> Pid of pppd: 7064 >>> --> Using interface ppp0 >>> --> pppd: (�l @�l >>> --> pppd: (�l @�l >>> --> pppd: (�l @�l >>> --> pppd: (�l @�l >>> --> pppd: (�l @�l >>> --> Disconnecting at Tue Jul 20 18:47:19 2010 >>> --> The PPP daemon has died: A modem hung up the phone (exit code = 16) >>> --> man pppd explains pppd error codes in more detail. >>> --> Try again and look into /var/log/messages and the wvdial and pppd >>> man pages for more information. >>> --> Auto Reconnect will be attempted in 5 seconds >>> --> Cannot get information for serial port. >>> --> Initializing modem. >>> --> Sending: ATZ >>> ATZ >>> OK >>> --> Sending: ATQ0 V1 E1 S0=0&C1&D2 +FCLASS=0 >>> ATQ0 V1 E1 S0=0&C1&D2 +FCLASS=0 >>> OK >>> --> Modem initialized. >>> --> Cannot get information for serial port. >>> --> Initializing modem. >>> --> Sending: ATZ >>> ATZ >>> OK >>> --> Sending: ATQ0 V1 E1 S0=0&C1&D2 +FCLASS=0 >>> ATQ0 V1 E1 S0=0&C1&D2 +FCLASS=0 >>> OK >>> --> Modem initialized. >>> --> Sending: ATDT3239998 >>> --> Waiting for carrier. >>> ATDT3239998 >>> CONNECT 49333 >>> User Access Verification >>> Username: >>> --> Carrier detected. Waiting for prompt. >>> Username: >>> --> Looks like a login prompt. >>> --> Sending: d4538542t >>> d4538542t >>> Password: >>> --> Looks like a password prompt. >>> --> Sending: (password) >>> % Authentication failed. >>> Username: >>> --> Looks like a login prompt. >>> --> Sending: d4538542t >>> d4538542t >>> Password: >>> --> Looks like a password prompt. >>> --> Sending: (password) >>> % Authentication failed. >>> NO CARRIER >>> --> Don't know what to do! Starting pppd and hoping for the best. >>> --> Starting pppd at Tue Jul 20 18:48:14 2010 >>> --> Pid of pppd: 7686 >>> --> Using interface ppp0 >>> --> pppd: (�l @�l >>> --> pppd: (�l @�l >>> --> pppd: (�l @�l >>> --> pppd: (�l @�l >>> --> pppd: (�l @�l >>> --> Disconnecting at Tue Jul 20 18:49:11 2010 >>> --> The PPP daemon has died: A modem hung up the phone (exit code = 16) >>> --> man pppd explains pppd error codes in more detail. >>> --> Try again and look into /var/log/messages and the wvdial and pppd >>> man pages for more information. >>> --> Auto Reconnect will be attempted in 5 seconds >>> --> Cannot get information for serial port. >>> --> Initializing modem. >>> --> Sending: ATZ >>> ATZ >>> OK >>> --> Sending: ATQ0 V1 E1 S0=0&C1&D2 +FCLASS=0 >>> ATQ0 V1 E1 S0=0&C1&D2 +FCLASS=0 >>> OK >>> --> Modem initialized. >>> --> Cannot get information for serial port. >>> --> Initializing modem. >>> --> Sending: ATZ >>> ATZ >>> OK >>> --> Sending: ATQ0 V1 E1 S0=0&C1&D2 +FCLASS=0 >>> ATQ0 V1 E1 S0=0&C1&D2 +FCLASS=0 >>> OK >>> --> Modem initialized. >>> --> Sending: ATDT3239998 >>> --> Waiting for carrier. >>> ATDT3239998 >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> ____wvdial.conf____(i connect to internet with this username& password >>> in windows 7)_______________________________________________ >>> [Dialer Defaults] >>> Init1 = ATZ >>> Init2 = ATQ0 V1 E1 S0=0&C1&D2 +FCLASS=0 >>> Modem Type = Analog Modem >>> ISDN = 0 >>> New PPPD = yes >>> Phone = 3239998 >>> Modem = /dev/ttySL0 >>> Username = d4538542t >>> Carrier Check = no >>> Password = d42695375 >>> Baud = 460800 >>> _______________________________________________________________________________ >>> >>> >>> >>> >>> >>> >>> >>> >>> and restart ubuntu! >>> >>> >>> >>> >>> run this commond and: >>> >>> >>> >>> ______________________________________________________________________________ >>> mohammad@FoXtUtS:~$ wvdial >>> --> WvDial: Internet dialer version 1.60 >>> --> Cannot open /dev/ttySL0: No such file or directory >>> --> Cannot open /dev/ttySL0: No such file or directory >>> --> Cannot open /dev/ttySL0: No such file or directory >>> mohammad@FoXtUtS:~$ sudo wvdial >>> [sudo] password for mohammad: >>> --> WvDial: Internet dialer version 1.60 >>> --> Cannot open /dev/ttySL0: No such file or directory >>> --> Cannot open /dev/ttySL0: No such file or directory >>> --> Cannot open /dev/ttySL0: No such file or directory >>> mohammad@FoXtUtS:~$ >>> _______________________________________________________________________________ >>> >>> Help me! >>> >>> >>> >>> >>> >>> >>> >>> On 7/15/2010 7:59 PM, Antonio Olivares wrote: >>>> Mohammad, >>>> >>>> scanModem reports that your modem is supported through >>>> slamr(slmodem-2.9.11-20100613.tar.gz) >>>> >>>> Predictive diagnostics for card in bus 04:05.0: >>>> Modem chipset detected on >>>> NAME="Modem: Smart Link Ltd. LM-I56N " >>>> CLASS=0703 >>>> PCIDEV=2003:8800 >>>> SUBSYS=16ef:2800 >>>> IRQ=18 >>>> IDENT=slamr >>>> >>>> For candidate modem in: 04:05.0 >>>> 0703 Modem: Smart Link Ltd. LM-I56N >>>> Primary device ID: 2003:8800 >>>> Support type needed or chipset: slamr >>>> >>>> >>>> The modem is supported by the Smartlink >>>> plus the slmodemd helper utility. Read the >>>> DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through >>>> guidance. >>>> >>>> >>>> For 2.6.32-21-generic compiling drivers is necessary. As of July 2010 >>>> the current packages at >>>> http://linmodems.technion.ac.il/packages/smartlink/ are the >>>> ungrab-winmodem-20090716.tar.gz and slmodem-2.9.11-20100613.tar.gz >>>> >>>> Read DOCs/Smartlink.txt >>>> >>>> Download: >>>> http://linmodems.technion.ac.il/packages/smartlink/slmodem-2.9.11-20100613.tar.gz >>>> and >>>> http://linmodems.technion.ac.il/packages/smartlink/ungrab-winmodem-20090716.tar.gz >>>> >>>> Copy both to your Linux partition. >>>> $ tar -zxvf slmodem-2.9.11-20100613 >>>> $ cd slmodem-2.9.11-20100613 >>>> $ make KERNEL_DIR=/lib/modules/2.6.32-21-generic/build >>>> $ make >>>> $ sudo make install >>>> $ cd .. >>>> $ tar -zxvf ungrab-winmodem-20090716.tar.gz >>>> $ cd ungrab-winmodem-20090716 >>>> $ sudo make clean >>>> $ sudo make >>>> $ sudo make install >>>> >>>> After that is successfull, run >>>> $ sudo modprobe ungrab-winmodem >>>> $ sudo modprobe slamr >>>> $ slmodemd -c YOUR_COUNTRY /dev/slamr0 >>>> >>>> Then leave slmodemd running in the background, and open up another >>>> terminal and run >>>> $ sudo wvdialconf /etc/wvdial.conf >>>> >>>> and hopefully it finds modem port which should be /dev/ttySL0, edit the >>>> file >>>> $ sudo gedit /etc/wvdial.conf and remove the ";" and "<" and">" add >>>> your Username, Password, ISP phone number and a line Carrier Check = >>>> no. >>>> >>>> Let us know if the modem responded or not. >>>> >>>> Regards, >>>> >>>> >>>> Antonio >>>> >>>> On 7/15/10, Mohammad Shabani M.<foxtuts@xxxxxxxxx> wrote: >>>>> how to install this modem driver? >>>>> >>>>> >>>>> _______________________________________________________________________________ >>>>> Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx >>>>> List >>>>> Server, >>>>> as HTML can contain viruses. Use as the email Subject Line: >>>>> YourName, YourCountry kernel 2.6.32-21-generic >>>>> With this Subject Line cogent experts will be alerted, and useful >>>>> case >>>>> names left in the Archive. >>>>> YourCountry will enable Country specific guidance. Linux experts in >>>>> YourCountry >>>>> can be found through: http://www.linux.org/groups/index.html. >>>>> They will know your Country's modem code, which may be essential for >>>>> dialup service. >>>>> Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an >>>>> Internet Provider mail filters. >>>>> So in a day, also check the Archived responses at >>>>> http://www.linmodems.org >>>>> -------------------------- System information >>>>> ---------------------------- >>>>> CPU=i686, Ubuntu , ALSA_version=1.0.21 >>>>> Linux version 2.6.32-21-generic (buildd@rothera) (gcc version 4.4.3 >>>>> (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 >>>>> scanModem update of: 2010_05_29 >>>>> >>>>> Distrib_ID=Ubuntu >>>>> DistribCodeName=lucid >>>>> AptRepositoryStem=http://ir.archive.ubuntu.com/ubuntu/ >>>>> >>>>> >>>>> Presently install your Linux Distributions dkms package. It provides >>>>> for >>>>> automated driver updates, >>>>> following upgrade of your kernel. For details see >>>>> http://linux.dell.com/projects.shtml#dkms >>>>> >>>>> There are no blacklisted modem drivers in /etc/modprobe* files >>>>> >>>>> Potentially useful modem drivers now loaded are: >>>>> >>>>> >>>>> If a USB modem or cellphone is attached and was not detected, please >>>>> provide available information in your request to discuss@xxxxxxxxxxxxx >>>>> >>>>> Candidate PCI devices with modem chips are: >>>>> 04:05.0 Modem: Smart Link Ltd. LM-I56N (rev 02) >>>>> High Definition Audio cards can host modem chips. >>>>> >>>>> For candidate card in slot 04:05.0, firmware information and bootup >>>>> diagnostics are: >>>>> PCI slot PCI ID SubsystemID Name >>>>> ---------- --------- --------- -------------- >>>>> 04:05.0 2003:8800 16ef:2800 Modem: Smart Link Ltd. LM-I56N >>>>> >>>>> Modem interrupt assignment and sharing: >>>>> 18: 0 0 IO-APIC-fasteoi uhci_hcd:usb4 >>>>> --- Bootup diagnostics for card in PCI slot 04:05.0 ---- >>>>> [ 0.201338] pci 0000:04:05.0: reg 10 32bit mmio pref: >>>>> [0xfc000000-0xfcffffff] >>>>> [ 0.201404] pci 0000:04:05.0: PME# supported from D3hot D3cold >>>>> [ 0.201411] pci 0000:04:05.0: PME# disabled >>>>> [ 0.308917] serial 0000:04:05.0: PCI INT A -> GSI 18 (level, low) >>>>> -> >>>>> IRQ 18 >>>>> [ 0.308929] serial 0000:04:05.0: PCI INT A disabled >>>>> >>>>> The PCI slot 04:05.0 of the modem card may be disabled early in >>>>> a bootup process, but then enabled later. If modem drivers load >>>>> but the modem is not responsive, read DOCs/Bootup.txt about >>>>> possible >>>>> fixes. >>>>> Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx >>>>> if help is needed. >>>>> >>>>> >>>>> === Finished firmware and bootup diagnostics, next deducing cogent >>>>> software. === >>>>> >>>>> Predictive diagnostics for card in bus 04:05.0: >>>>> Modem chipset detected on >>>>> NAME="Modem: Smart Link Ltd. LM-I56N " >>>>> CLASS=0703 >>>>> PCIDEV=2003:8800 >>>>> SUBSYS=16ef:2800 >>>>> IRQ=18 >>>>> IDENT=slamr >>>>> >>>>> For candidate modem in: 04:05.0 >>>>> 0703 Modem: Smart Link Ltd. LM-I56N >>>>> Primary device ID: 2003:8800 >>>>> Support type needed or chipset: slamr >>>>> >>>>> >>>>> The modem is supported by the Smartlink >>>>> plus the slmodemd helper utility. Read the >>>>> DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through >>>>> guidance. >>>>> >>>>> >>>>> For 2.6.32-21-generic compiling drivers is necessary. As of October >>>>> 2007 >>>>> the current packages at >>>>> http://linmodems.technion.ac.il/packages/smartlink/ are the >>>>> ungrab-winmodem-20070505.tar.gz and slmodem-2.9.11-20080126.tar.gz >>>>> >>>>> Writing DOCs/Smartlink.txt >>>>> ============ end Smartlink section ===================== >>>>> >>>>> Completed candidate modem analyses. >>>>> >>>>> The base of the UDEV device file system is: /dev/.udev >>>>> >>>>> Versions adequately match for the compiler installed: 4.4.3 >>>>> and the compiler used in kernel assembly: 4.4.3 >>>>> >>>>> The patch utility is needed for compiling ALSA drivers, and >>>>> possibly >>>>> others. >>>>> >>>>> >>>>> Minimal compiling resources appear complete: >>>>> make utility - /usr/bin/make >>>>> Compiler version 4.4 >>>>> linuc_headers base folder /lib/modules/2.6.32-21-generic/build >>>>> >>>>> However some compilations and executable functions may need >>>>> additional >>>>> files, >>>>> in the FileNames.h (so called kernel "h"eaders) collection >>>>> installed >>>>> in /usr/include/ . >>>>> For martian_modem, additional required packages are needed. The >>>>> also >>>>> required headers of package libc6 are commonly installed by default. >>>>> Compiling hsfmodem drivers does require linux-libc-dev and >>>>> libc6-dev >>>>> packages, for kernels 2.6.24 and later versions. >>>>> In not included on your install CD, search for them at >>>>> http://packages.ubuntu.com >>>>> or comparable Repository for other Linux distros. >>>>> When compiling ALSA drivers, the utility "patch" will also be >>>>> needed. >>>>> >>>>> >>>>> >>>>> >>>>> If a driver compilation fails, with message including some lack of some >>>>> FileName.h (stdio.h for example), then >>>>> Some additional kernel-header files need installation to /usr/include. >>>>> The minimal additional packages are libc6-dev >>>>> and any of its dependents, under Ubuntu linux-libc-dev >>>>> >>>>> If an alternate ethernet connection is available, >>>>> $ apt-get update >>>>> $ apt-get -s install linux-kernel-devel >>>>> will install needed packages. >>>>> For Debian/Ubuntu related distributions, run the following command to >>>>> display the needed package list: >>>>> >>>>> Otherwise packages have to be found through http://packages.ubuntu.com >>>>> Once downloaded and transferred into a Linux partition, >>>>> they can be installed alltogether with: >>>>> $ sudo dpkg -i *.deb >>>>> >>>>> >>>>> Checking pppd properties: >>>>> -rwsr-xr-- 1 root dip 273312 2010-03-07 07:29 /usr/sbin/pppd >>>>> >>>>> In case of an "error 17" "serial loopback" problem, see: >>>>> >>>>> http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html >>>>> >>>>> To enable dialout without Root permission do: >>>>> $ su - root (not for Ubuntu) >>>>> sudo chmod a+x /usr/sbin/pppd >>>>> or under Ubuntu related Linuxes >>>>> sudo chmod a+x /usr/sbin/pppd >>>>> >>>>> Checking settings of: /etc/ppp/options >>>>> asyncmap 0 >>>>> noauth >>>>> crtscts >>>>> lock >>>>> hide-password >>>>> modem >>>>> proxyarp >>>>> lcp-echo-interval 30 >>>>> lcp-echo-failure 4 >>>>> noipx >>>>> >>>>> In case of a message like: >>>>> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied >>>>> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html >>>>> >>>>> For guidance on FAX usage, get from >>>>> http://linmodems.technion.ac.il/packages/ get faxing.tar.gz >>>>> It has samples for a modem using port /dev/ttySL0, which must be >>>>> changed >>>>> to match your modem's port. >>>>> >>>>> Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 >>>>> Which can interfere with Browser naviagation. >>>>> >>>>> Don't worry about the following, it is for experts should trouble >>>>> shooting be necessary. >>>>> ========================================================== >>>>> >>>>> Checking for modem support lines: >>>>> -------------------------------------- >>>>> /device/modem symbolic link: >>>>> slmodemd created symbolic link /dev/ttySL0: >>>>> Within /etc/udev/ files: >>>>> >>>>> Within /etc/modprobe.conf files: >>>>> /etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2 >>>>> /etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2 >>>>> /etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order >>>>> to blacklist unwanted modem drivers >>>>> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem >>>>> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem >>>>> Within any ancient /etc/devfs files: >>>>> >>>>> Within ancient kernel 2.4.n /etc/module.conf files: >>>>> >>>>> --------- end modem support lines -------- >>>>> >>>>> _______________________________________________________________________________ >>>>> :-( >>>>> >>> > >
