Cristian, Sorry for late reply, but have you checked BIOS settings? Change PCI to nonPlug&Play OS or something like that? Regards, Antonio On Mon, Jun 28, 2010 at 12:21 PM, Cristian Iturri <cristian@xxxxxxxxxxx> wrote: > I've changed the modem card to another PCI slot so now the pci device is > 0000:04:00.0 wich still have its PCI interrupt disabled. > I don't know what to do > > El 28/06/10 13:49, Cristian Iturri escribió: >> >> I've compiled and installed both the ungrab-winmodem-20090716 and the >> slmodem-2.9.11-20080126 >> then I've ran these commands: >> >> # modprobe ungrab-winmodem >> # tail /var/log/messages >> Jun 28 12:37:00 pbx saslauthd[2590]: detach_tty : master pid is: 2590 >> Jun 28 12:37:00 pbx saslauthd[2590]: ipc_init : listening on socket: >> /var/run/saslauthd/mux >> Jun 28 12:40:07 pbx ntpd[2117]: synchronized to LOCAL(0), stratum 10 >> Jun 28 12:40:07 pbx ntpd[2117]: kernel time sync enabled 0001 >> Jun 28 12:44:24 pbx ntpd[2117]: synchronized to 200.80.32.170, stratum 3 >> Jun 28 12:47:39 pbx kernel: ACPI: PCI interrupt for device 0000:04:01.0 >> disabled >> Jun 28 13:02:36 pbx ntpd[2117]: synchronized to 200.11.116.1, stratum 2 >> Jun 28 13:10:18 pbx ntpd[2117]: time reset +0.224818 s >> Jun 28 13:13:35 pbx ntpd[2117]: synchronized to LOCAL(0), stratum 10 >> Jun 28 13:15:45 pbx ntpd[2117]: synchronized to 200.11.116.1, stratum 2 >> # modprobe slamr >> # tail /var/log/messages >> Jun 28 13:10:18 pbx ntpd[2117]: time reset +0.224818 s >> Jun 28 13:13:35 pbx ntpd[2117]: synchronized to LOCAL(0), stratum 10 >> Jun 28 13:15:45 pbx ntpd[2117]: synchronized to 200.11.116.1, stratum 2 >> Jun 28 13:29:30 pbx kernel: slamr: SmartLink AMRMO modem. >> Jun 28 13:29:30 pbx kernel: slamr: probe 2000:2800 �\$ ������t$ �|$ �� ��G >> 0 card... >> Jun 28 13:29:30 pbx kernel: PCI: Enabling device 0000:04:01.0 (0000 -> >> 0002) >> Jun 28 13:29:30 pbx kernel: ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 16 >> (level, low) -> IRQ 169 >> Jun 28 13:29:30 pbx kernel: slamr: cannot create card. >> Jun 28 13:29:30 pbx kernel: ACPI: PCI interrupt for device 0000:04:01.0 >> disabled >> Jun 28 13:29:30 pbx kernel: slamr: probe of 0000:04:01.0 failed with error >> -12 >> # slmodemd -c ARGENTINA /dev/slamr0 >> error: mdm setup: cannot open dev `/dev/slamr0': No such device >> error: cannot setup device `/dev/slamr0' >> >> It seems like the pci interrupt for the modem is disabled, I've tried >> starting CentOS with pci=routeirq and that just hang up the PC, then I've >> tried pollirq and nothing happens. >> >> Can somebody help me with that? >> >
