From: ddailey@xxxxxxxxx <ddailey@xxxxxxxxx>
Subject: Deborah Dailey, USA kernel 2.6.32-21-generic - wvdial
cannot find my modem
To: discuss@xxxxxxxxxxxxx
Date: Wednesday, June 16, 2010, 2:44 PM
I am still working on trying to get
dialup internet working in one way or another. I gave
up on the laptop for now, because it would not upgrade. I
think I finally got everything installed properly on my
desktop computer, but it seems that wvdial cannot find my
modem.
Following are the results of running agrsm-test, sudo
wvdialconf /etc/wvdial.conf, and sudo wvdial. I have
also attached a copy of ModemData.txt for this
computer. The drivers are loaded, the symbolic link
has been created, and I have put the line "Modem =
/dev/ttySAGR" into wvdial.conf, but still wvdial does not
seem to be able to communicate with my usb modem. Can
you please help me figure out what else I am missing? Or do I just
have an odd chipset that is not supported?
------------------------------------------------------------------------------
agrsm-test:
Loading drivers:
Drivers loaded:
agrserial 9981 0
agrmodem 1332700 1
snd 54148 17
agrmodem,snd_cmipci,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_opl3_lib,snd_hwdep,snd_mpu401_uart,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
and symbolic link created:
lrwxrwxrwx 1 root root 12 2010-05-23 13:39 /dev/ttySAGR
-> /dev/ttyAGS3
Checking for utility wvdialconf
Found /usr/bin/wvdialconf, preparing to run:
wvdialconf
/etc/wvdial.conf
A file /etc/wvdial.conf already exists, first renaming
to /etc/wvdial.201005233905
ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next
try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next
try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200,
giving up.
ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next
try: 9600 baud
ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next
try: 115200 baud
ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200,
giving up.
Modem Port Scan<*1>: S2 S3
ttySAGR<*1>: ATQ0 V1 E1 -- failed with 2400 baud,
next try: 9600 baud
ttySAGR<*1>: ATQ0 V1 E1 -- failed with 9600 baud,
next try: 115200 baud
ttySAGR<*1>: ATQ0 V1 E1 -- and failed too at 115200,
giving up.
A reboot may be necessary before modem detection through:
sudo modprobe
agrserial
Which will load agrmodem, agrserial and create the symbolic
link needed
for:
sudo wvdialconf
The installation record has been written to
./agrsm-test.txt
------------------------------------------------------------------------------
sudo wvdialconf /etc/wvdial.conf:
Editing `/etc/wvdial.conf'.
Scanning your serial ports for a modem.
ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next
try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next
try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200,
giving up.
ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next
try: 9600 baud
ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next
try: 115200 baud
ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200,
giving up.
Modem Port Scan<*1>: S2 S3
ttySAGR<*1>: ATQ0 V1 E1 -- failed with 2400 baud,
next try: 9600 baud
ttySAGR<*1>: ATQ0 V1 E1 -- failed with 9600 baud,
next try: 115200 baud
ttySAGR<*1>: ATQ0 V1 E1 -- and failed too at 115200,
giving up.
Sorry, no modem was detected! Is it in use by another
program?
Did you configure it properly with setserial?
Please read the FAQ at http://open.nit.ca/wiki/?WvDial
If you still have problems, send mail to <wvdial-list@xxxxxxxxxxxx>.
------------------------------------------------------------------------------
sudo wvdial:
--> WvDial: Internet dialer version 1.60
--> Initializing modem.
--> Sending: ATZ
--> Sending: ATQ0
--> Re-Sending: ATZ
--> Modem not responding.
------------------------------------------------------------------------------
Since wvdial.conf could not be created automatically, I
tried to
manually edit it as follows:
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Baud = 115200
Modem = /dev/ttySAGR
Phone = xxxxxxx
Password = xxxxxxx
Username = xxxxxxx
New PPPD = yes
------------------------------------------------------------------------------
Thanks.
Debbie
