Carlos
I have managed to compile the driver, but the dialers kppp and wvdial
are not dialing :(,
change
line 420 port.info to port.state
line 513 port.state
line 565 delta_msr_wait to port.delta_msr_wait
line 1226? comment it out where it has NULL
Here are results:
diff linmodem-2.6.c /root/Downloads/pctel-0.9.7-9-rht-10/src/linmodem-2.6.c
31d30
<
418c417
< struct tty_struct *tty = p->port.state->tty;
---
> struct tty_struct *tty = p->port.info->tty;
420c419
< struct tty_struct *tty = p->port.state->port.tty;
---
> struct tty_struct *tty = p->port.info->port.tty;
513c512
< struct circ_buf *xmit = &p->port.state->xmit;
---
> struct circ_buf *xmit = &p->port.info->xmit;
565c564
< wake_up_interruptible(&p->port.state->port.delta_msr_wait);
---
> wake_up_interruptible(&p->port.info->delta_msr_wait);
< int linmodem_register_port(struct uart_port *port) /* int */
---
> int linmodem_register_port(struct uart_port *port)
1227c1226
< // p->reg.state->port = NULL; /* NULL */
---
> p->reg.state->port = NULL;
pctel_hw: module license 'GPL linked with proprietary libraries' taints kernel.
pctel_hw(155): PCTel hardware driver version 0.9.7-9-rht-9 for PCT789
pctel(481): pctel v0.1 loaded
root@slax:~/Downloads/tmp/pctel-0.9.7-9-rht-10#
root@slax:~/Downloads/pctel-0.9.7-9-rht-10/src# lsmod
Module Size Used by
pctel 6954 0
pctel_hw 1035214 1 pctel
linmodem 10461 1 pctel
root@slax:~/Downloads/pctel-0.9.7-9-rht-10/src# make clean
rm -f vuart.o i8xxhal.o binary.a built-in.o
rm -f linmodem-2.6.o ptserial-2.6.o ptserial_hw-2.6.o ptserial_pci-2.6.o
rm -f linmodem.o pctel.o pctel_hw.o
rm -f linmodem.ko pctel.ko pctel_hw.ko
rm -f linmodem.mod.c pctel.mod.c pctel_hw.mod.c
rm -f linmodem.mod.o pctel.mod.o pctel_hw.mod.o
rm -f .built-in.o.cmd
rm -f .pctel.ko.cmd .pctel.mod.o.cmd .pctel.o.cmd
rm -f .pctel_hw.ko.cmd .pctel_hw.mod.o.cmd .pctel_hw.o.cmd
rm -f .linmodem.ko.cmd .linmodem.mod.o.cmd .linmodem.o.cmd
rm -f .linmodem-2.6.o.cmd .ptserial-2.6.o.cmd .ptserial_hw-2.6.o.cmd
rm -f .ptserial_pci-2.6.o.cmd
rm -rf .tmp_versions
rm -f Module.symvers
root@slax:~/Downloads/pctel-0.9.7-9-rht-10/src# ./configure -auto
checking for running kernel version...perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LC_COLLATE = "C",
LANG = "en_US"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LC_COLLATE = "C",
LANG = "en_US"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LC_COLLATE = "C",
LANG = "en_US"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LC_COLLATE = "C",
LANG = "en_US"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
2.6.33
checking for ptserial...ptserial-2.6.c
checking for gcc...4.4.3
checking for kernel gcc version...4.4.3
searching for kernel includes...found at /lib/modules/2.6.33.2/build/include
checking for autoconf.h.../lib/modules/2.6.33.2/build/include/linux/autoconf.h
yes
checking for kernel version in utsrelease.h...UTS_RELEASE is 2.6.33.2
checking type of tty_struct.count...int
checking for presence of udev...present (kernel version 2.6.13 or later)
detecting your modem...** error
autodetection failed, your modem is not in the database of
known modems. Try to guess the hal and report success, if
the modem worked. Please read the FAQ about autodetection
failed.
please enter your hal type
choose one of: pct789, cm8738, i8xx, sis, via686a
hal type: pct789
root@slax:~/Downloads/pctel-0.9.7-9-rht-10/src# make all
CC vuart.o
LD binary.a
make -C /lib/modules/2.6.33.2/build M=/root/Downloads/pctel-0.9.7-9-rht-10/src
make[1]: Entering directory `/usr/src/linux-2.6.33.2'
WARNING: Symbol version dump /usr/src/linux-2.6.33.2/Module.symvers
is missing; modules will have no dependencies and modversions.
LD /root/Downloads/pctel-0.9.7-9-rht-10/src/built-in.o
CC [M] /root/Downloads/pctel-0.9.7-9-rht-10/src/linmodem-2.6.o
CC [M] /root/Downloads/pctel-0.9.7-9-rht-10/src/ptserial-2.6.o
CC [M] /root/Downloads/pctel-0.9.7-9-rht-10/src/ptserial_pci-2.6.o
/root/Downloads/pctel-0.9.7-9-rht-10/src/ptserial_pci-2.6.c: In
function 'pci_pctel_setup':
/root/Downloads/pctel-0.9.7-9-rht-10/src/ptserial_pci-2.6.c:231:
warning: format '%x' expects type 'unsigned int', but argument 9 has
type 'long unsigned int'
/root/Downloads/pctel-0.9.7-9-rht-10/src/ptserial_pci-2.6.c: In
function 'amr_pctel_setup':
/root/Downloads/pctel-0.9.7-9-rht-10/src/ptserial_pci-2.6.c:291:
warning: format '%04x' expects type 'unsigned int', but argument 7 has
type 'long unsigned int'
/root/Downloads/pctel-0.9.7-9-rht-10/src/ptserial_pci-2.6.c: In
function 'pciserial_init_one':
/root/Downloads/pctel-0.9.7-9-rht-10/src/ptserial_pci-2.6.c:606:
warning: format '%x' expects type 'unsigned int', but argument 4 has
type 'long unsigned int'
CC [M] /root/Downloads/pctel-0.9.7-9-rht-10/src/ptserial_hw-2.6.o
LD [M] /root/Downloads/pctel-0.9.7-9-rht-10/src/linmodem.o
LD [M] /root/Downloads/pctel-0.9.7-9-rht-10/src/pctel.o
LD [M] /root/Downloads/pctel-0.9.7-9-rht-10/src/pctel_hw.o
Building modules, stage 2.
MODPOST 3 modules
CC /root/Downloads/pctel-0.9.7-9-rht-10/src/linmodem.mod.o
LD [M] /root/Downloads/pctel-0.9.7-9-rht-10/src/linmodem.ko
CC /root/Downloads/pctel-0.9.7-9-rht-10/src/pctel.mod.o
LD [M] /root/Downloads/pctel-0.9.7-9-rht-10/src/pctel.ko
CC /root/Downloads/pctel-0.9.7-9-rht-10/src/pctel_hw.mod.o
LD [M] /root/Downloads/pctel-0.9.7-9-rht-10/src/pctel_hw.ko
make[1]: Leaving directory `/usr/src/linux-2.6.33.2'
linmodem(1282): linmodem v0.1 loaded
pctel_hw: module license 'GPL linked with proprietary libraries' taints kernel.
Disabling lock debugging due to kernel taint
pctel_hw(155): PCTel hardware driver version 0.9.7-9-rht-9 for PCT789
pctel(481): pctel v0.1 loaded
pctel(490): pctel v0.1 unloaded
pctel_hw(165): Unloading PCTel hardware driver version 0.9.7-9-rht-9
linmodem(1306): linmodem v0.1 unloaded
linmodem(1282): linmodem v0.1 loaded
pctel_hw(155): PCTel hardware driver version 0.9.7-9-rht-9 for PCT789
pctel(481): pctel v0.1 loaded
pctel(490): pctel v0.1 unloaded
pctel_hw(165): Unloading PCTel hardware driver version 0.9.7-9-rht-9
linmodem(1306): linmodem v0.1 unloaded
linmodem(1282): linmodem v0.1 loaded
pctel_hw(155): PCTel hardware driver version 0.9.7-9-rht-9 for PCT789
pctel(481): pctel v0.1 loaded
but wvdial :
root@slax:~/Downloads# ls /dev/modem -l
lrwxrwxrwx 1 root root 16 Jun 5 15:50 /dev/modem -> /dev/ttyS_PCTEL0
root@slax:~/Downloads# wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot open /dev/modem: No such file or directory
--> Cannot open /dev/modem: No such file or directory
--> Cannot open /dev/modem: No such file or directory
root@slax:~/Downloads#
I believe it is now a matter of changing some things like the
suggestions given here:
/root/Downloads/pctel-0.9.7-9-rht-10/src/ptserial_pci-2.6.c: In
function 'pci_pctel_setup':
/root/Downloads/pctel-0.9.7-9-rht-10/src/ptserial_pci-2.6.c:231:
warning: format '%x' expects type 'unsigned int', but argument 9 has
type 'long unsigned int'
/root/Downloads/pctel-0.9.7-9-rht-10/src/ptserial_pci-2.6.c: In
function 'amr_pctel_setup':
/root/Downloads/pctel-0.9.7-9-rht-10/src/ptserial_pci-2.6.c:291:
warning: format '%04x' expects type 'unsigned int', but argument 7 has
type 'long unsigned int'
/root/Downloads/pctel-0.9.7-9-rht-10/src/ptserial_pci-2.6.c: In
function 'pciserial_init_one':
/root/Downloads/pctel-0.9.7-9-rht-10/src/ptserial_pci-2.6.c:606:
warning: format '%x' expects type 'unsigned int', but argument 4 has
type 'long unsigned int'
and it should have a chance at working?
Hope this helps,
Antonio
On 6/5/10, carlos ramos <caramosc@xxxxxxxxx> wrote:
> Hi guys, well i'm trying my best to understand what you are doing. I'm
> going to put what i had done before i asked you guys for help to try
> to solve the problem with what i read googling, i didn't mention it at
> first because i thought it would not be important, but i can now see
> that its similar to what i had done gooling.
>
> I read in a forum that for the "asm/match--default" problem to change
> lines 426 and 442 in the ./configure file as follows:
>
> 426--- if [ ! -d ${kernel_inc}/asm/mach-default ]
> 426--- if [ ! -d ${kernel_inc}/asm ] <---new
>
> 442--- extra_includes=-I${kernel_inc2}/asm/mach-default
> 442--- extra_includes=-I${kernel_inc2}/asm <---new
>
>
> then when i do:
>
> carlos@carlos-desktop:~/Desktop/pctel-0.9.7-9-rht-10$ sudo ./setup
> [sudo] password for carlos:
> checking for running kernel version...2.6.32
> checking for ptserial...ptserial-2.6.c
> checking for gcc...4.4.3
> checking for kernel gcc version...4.4.3
> searching for kernel includes...found at
> /lib/modules/2.6.32-21-generic/build/include
> checking for
> autoconf.h.../lib/modules/2.6.32-21-generic/build/include/linux/autoconf.h
> checking for asm/mach-default...yes
> checking for kernel version in utsrelease.h...UTS_RELEASE is
> 2.6.32-21-generic
> checking type of tty_struct.count...int
> checking for presence of udev...present (kernel version 2.6.13 or later)
> detecting your modem...found. Your modem is a pct789 type modem.
> ** compilation error
> please read the FAQ about reporting compilation problems
> and report this problem. A transcript of the build process
> has been saved in src/make.log. When reporting problems to
> the development team, please send us this file.
> carlos@carlos-desktop:~/Desktop/pctel-0.9.7-9-rht-10$
>
>
> and this is the make.log file:
>
> CC vuart.o
> LD binary.a
> make -C /lib/modules/2.6.32-21-generic/build
> M=/home/carlos/Desktop/pctel-0.9.7-9-rht-10/src
> make[1]: Entering directory `/usr/src/linux-headers-2.6.32-21-generic'
> LD /home/carlos/Desktop/pctel-0.9.7-9-rht-10/src/built-in.o
> CC [M] /home/carlos/Desktop/pctel-0.9.7-9-rht-10/src/linmodem-2.6.o
> /home/carlos/Desktop/pctel-0.9.7-9-rht-10/src/linmodem-2.6.c: In
> function ‘receive_chars’:
> /home/carlos/Desktop/pctel-0.9.7-9-rht-10/src/linmodem-2.6.c:419:
> error: ‘struct uart_port’ has no member named ‘info’
> /home/carlos/Desktop/pctel-0.9.7-9-rht-10/src/linmodem-2.6.c: In
> function ‘transmit_chars’:
> /home/carlos/Desktop/pctel-0.9.7-9-rht-10/src/linmodem-2.6.c:512:
> error: ‘struct uart_port’ has no member named ‘info’
> /home/carlos/Desktop/pctel-0.9.7-9-rht-10/src/linmodem-2.6.c: In
> function ‘check_modem_status’:
> /home/carlos/Desktop/pctel-0.9.7-9-rht-10/src/linmodem-2.6.c:564:
> error: ‘struct uart_port’ has no member named ‘info’
> /home/carlos/Desktop/pctel-0.9.7-9-rht-10/src/linmodem-2.6.c: In
> function ‘linmodem_register_port’:
> /home/carlos/Desktop/pctel-0.9.7-9-rht-10/src/linmodem-2.6.c:1226:
> error: incompatible types when assigning to type ‘struct tty_port’
> from type ‘void *’
> make[2]: *** [/home/carlos/Desktop/pctel-0.9.7-9-rht-10/src/linmodem-2.6.o]
> Error 1
> make[1]: *** [_module_/home/carlos/Desktop/pctel-0.9.7-9-rht-10/src] Error 2
> make[1]: Leaving directory `/usr/src/linux-headers-2.6.32-21-generic'
> make: *** [all] Error 2
>
>
> then for this error i read to change from "info" to "state" in the
> indicated lines in the linmodem-2.6.c file, then when i do:
>
> carlos@carlos-desktop:~/Desktop/pctel-0.9.7-9-rht-10$ sudo ./setup
> [sudo] password for carlos:
> checking for running kernel version...2.6.32
> checking for ptserial...ptserial-2.6.c
> checking for gcc...4.4.3
> checking for kernel gcc version...4.4.3
> searching for kernel includes...found at
> /lib/modules/2.6.32-21-generic/build/include
> checking for
> autoconf.h.../lib/modules/2.6.32-21-generic/build/include/linux/autoconf.h
> checking for asm/mach-default...yes
> checking for kernel version in utsrelease.h...UTS_RELEASE is
> 2.6.32-21-generic
> checking type of tty_struct.count...int
> checking for presence of udev...present (kernel version 2.6.13 or later)
> detecting your modem...found. Your modem is a pct789 type modem.
> ** compilation error
> please read the FAQ about reporting compilation problems
> and report this problem. A transcript of the build process
> has been saved in src/make.log. When reporting problems to
> the development team, please send us this file.
> carlos@carlos-desktop:~/Desktop/pctel-0.9.7-9-rht-10$
>
>
> and this is the make.log file:
>
> CC vuart.o
> LD binary.a
> make -C /lib/modules/2.6.32-21-generic/build
> M=/home/carlos/Desktop/pctel-0.9.7-9-rht-10/src
> make[1]: Entering directory `/usr/src/linux-headers-2.6.32-21-generic'
> LD /home/carlos/Desktop/pctel-0.9.7-9-rht-10/src/built-in.o
> CC [M] /home/carlos/Desktop/pctel-0.9.7-9-rht-10/src/linmodem-2.6.o
> /home/carlos/Desktop/pctel-0.9.7-9-rht-10/src/linmodem-2.6.c: In
> function ‘check_modem_status’:
> /home/carlos/Desktop/pctel-0.9.7-9-rht-10/src/linmodem-2.6.c:564:
> error: ‘struct uart_state’ has no member named ‘delta_msr_wait’
> /home/carlos/Desktop/pctel-0.9.7-9-rht-10/src/linmodem-2.6.c: In
> function ‘linmodem_register_port’:
> /home/carlos/Desktop/pctel-0.9.7-9-rht-10/src/linmodem-2.6.c:1226:
> error: incompatible types when assigning to type ‘struct tty_port’
> from type ‘void *’
> make[2]: *** [/home/carlos/Desktop/pctel-0.9.7-9-rht-10/src/linmodem-2.6.o]
> Error 1
> make[1]: *** [_module_/home/carlos/Desktop/pctel-0.9.7-9-rht-10/src] Error 2
> make[1]: Leaving directory `/usr/src/linux-headers-2.6.32-21-generic'
> make: *** [all] Error 2
>
>
> as I said I really don't know about programing, i just changed the
> lines in the files to see if the driver could install, with what I
> read that could solve the problem. Maybe with output of the make.log
> files can be of some help.
>
>
>
>
> On 6/5/10, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote:
>> The residual compile problem is at least in part due to
>> port.info becoming obsolete. Below is a fix that was done for the
>> ltmodem code. In the pctel src/linmodems.2.6.c , I tried
>> substitutions of port.state for port.info, but the compile still
>> failed. So something a bit more sophisticated is needed.
>>
>> MarvS
>>
>>
>> ---------- Forwarded message ----------
>> From: Paul Gortmaker <paul.gortmaker@xxxxxxxxxxxxx>
>> Date: Mon, Jan 4, 2010 at 5:03 PM
>> Subject: [PATCH 8/9] v8250: uart_info is gone
>> To: Discuss@xxxxxxxxxxxxx
>>
>>
>> See upstream kernel.org commit ebd2c8f6d2ec4012c267ecb95e72a57b8355a705
>> where things are relocated into uart_state
>>
>> Signed-off-by: Paul Gortmaker <paul.gortmaker@xxxxxxxxxxxxx>
>> ---
>> v8250.c | 8 ++++----
>> 1 files changed, 4 insertions(+), 4 deletions(-)
>>
>> diff --git a/v8250.c b/v8250.c
>> index b422ad1..18849a6 100644
>> --- a/v8250.c
>> +++ b/v8250.c
>> @@ -178,7 +178,7 @@ static void serial8250_enable_ms(struct uart_port
>> *port)
>> static void
>> receive_chars(struct vuart_8250_port *up, unsigned int *status)
>> {
>> - struct tty_struct *tty = up->port.info->port.tty;
>> + struct tty_struct *tty = up->port.state->port.tty;
>> unsigned char ch, lsr = *status;
>> int max_count = 256;
>> char flag;
>> @@ -240,7 +240,7 @@ receive_chars(struct vuart_8250_port *up, unsigned
>> int *status)
>>
>> static void transmit_chars(struct vuart_8250_port *up)
>> {
>> - struct circ_buf *xmit = &up->port.info->xmit;
>> + struct circ_buf *xmit = &up->port.state->xmit;
>> int count;
>>
>> if (up->port.x_char) {
>> @@ -281,7 +281,7 @@ static unsigned int check_modem_status(struct
>> vuart_8250_port *up)
>> unsigned int status = serial_in(up, UART_MSR);
>>
>> if (status & UART_MSR_ANY_DELTA && up->ier & UART_IER_MSI &&
>> - up->port.info != NULL) {
>> + up->port.state != NULL) {
>> if (status & UART_MSR_TERI)
>> up->port.icount.rng++;
>> if (status & UART_MSR_DDSR)
>> @@ -291,7 +291,7 @@ static unsigned int check_modem_status(struct
>> vuart_8250_port *up)
>> if (status & UART_MSR_DCTS)
>> uart_handle_cts_change(&up->port, status &
>> UART_MSR_CTS);
>>
>> - wake_up_interruptible(&up->port.info->delta_msr_wait);
>> + wake_up_interruptible(&up->port.state->delta_msr_wait);
>> }
>>
>> return status;
>> --
>> 1.6.5.2
>>
>
