I'm trying to get the built in modem on my Gateway laptop (MT6451 Notebook PC)
working from one of my installed Linux. This will be a backup for my
broadband Ethernet connection, and to check my email when not at home.
I'm hoping I can get it working for my Elive 1.9.51 installation.
using kernel version 2.6.30.9-elive-686 I attached the ModemData.txt, &
dmesg.txt from the scanModem output.
My first and current problem is that the ModemData.txt says I should:
Download from http://linmodems.technion.ac.il/packages/smartlink/ the package
SLMODEMD_gcc4.3_alsa1.0.20.tar.gz
---------------^---------^^-------
But the two closest matches to that file on that site are:
SLMODEMD_gcc4.3_alsa1.0.18.tar.gz 26-Feb-2009 08:22 626K
---------------^---------^^-------
SLMODEMD_gcc4.4_alsa1.0.20.tar.gz 13-Mar-2010 21:38 626K
---------------^---------^^-------
So which file do download???
--
| ~^~ ~^~
| <?> <?> Joe (theWordy) Philbrook
| ^ J(tWdy)P
| \___/ <<jtwdyp@xxxxxxxx>>
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.30.9-elive-686
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686, debian , ALSA_version=1.0.20
Linux version 2.6.30.9-elive-686 (root@Zeus) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 SMP Fri Oct 9 10:25:06 CEST 2009
scanModem update of: 2010_03_18
/etc/lsb-release not found
Presently install your Linux Distributions dkms package. It provides for automated driver updates,
following upgrade of your kernel. For details see http://linux.dell.com/projects.shtml#dkms
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
snd_hda_intel
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx
Candidate PCI devices with modem chips are:
00:14.2 Audio device: ATI Technologies Inc IXP SB4x0 High Definition Audio Controller (rev 01)
High Definition Audio cards can host modem chips.
For candidate card in slot 00:14.2, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:14.2 1002:437b 1002:437b Audio device: ATI Technologies Inc IXP SB4x0 High Definition Audio Controller
Modem interrupt assignment and sharing:
16: 3 683 IO-APIC-fasteoi eth0, HDA Intel
--- Bootup diagnostics for card in PCI slot 00:14.2 ----
[ 0.117935] pci 0000:00:14.2: reg 10 64bit mmio: [0xc0000000-0xc0003fff]
[ 0.117935] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.117935] pci 0000:00:14.2: PME# disabled
[ 10.977174] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
The PCI slot 00:14.2 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.
The modem cards detected by "aplay -l" are:
card 0: SB [HDA ATI SB], device 6: Si3054 Modem [Si3054 Modem]
The /proc/asound/pcm file reports:
-----------------------
00-00: STAC92xx Analog : STAC92xx Analog : playback 1 : capture 1
00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1
about /proc/asound/cards:
------------------------
0 [SB ]: HDA-Intel - HDA ATI SB
HDA ATI SB at 0xc0000000 irq 16
PCI slot 00:14.2 has a High Definition Audio Card
The drivers are in the kernel modules tree at:
/lib/modules/2.6.30.9-elive-686/kernel/sound/pci/hda/snd-hda-intel.ko
The modem codec file for the HDA card is: /proc/asound/card0/codec#1
--------------------------------------------------------
Codec: Motorola Si3054
Address: 1
Function Id: 0x2
Vendor Id: 0x10573057
Subsystem Id: 0x00010001
Revision Id: 0x100100
Modem Function Group: 0x1
The audio card hosts a softmodem chip: 0x10573057
The softmodem chip 0x10573057 is in principle supported by the COMM support of slmodemd
and the joint snd-hda-intel audio+modem driver, begun with ALSA version 1.0.13.
For HDA cards with ALC883 chips, an upgrade to ALSA verions 1.0.15 way be necessary. Instructions for Upgrading snd-hda-intel and its dependent driver set are at:
http://linmodems.technion.ac.il/bigarch/archive-eighth/msg00838.html
If not a Conexant modem, the driver snd-hda-intel with its dependent drivers:
snd_hda_intel 25128 2
snd_hda_codec 74540 3 snd_hda_codec_si3054,snd_hda_codec_idt,snd_hda_intel
snd_pcm 74384 4 snd_hda_codec_si3054,snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd 57220 17 snd_hda_codec_si3054,snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
snd_page_alloc 8852 2 snd_hda_intel,snd_pcm
----------
provide audio + modem support with the modem chip residing on the subsystem.
Any particular card can host any one of several soft modem chips.
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 00:14.2:
Modem chipset detected on
NAME="Audio device: ATI Technologies Inc IXP SB4x0 High Definition Audio Controller "
CLASS=0403
PCIDEV=1002:437b
SUBSYS=1002:437b
IRQ=16
HDA2=00:14.2
SOFT=1002:437b.HDA
HDAchipVendorID=1057
CHIP=0x10573057
IDENT=slmodemd
SLMODEMD_DEVICE=hw:0,6
Driver=snd-hda-intel
For candidate modem in: 00:14.2
0403 Audio device: ATI Technologies Inc IXP SB4x0 High Definition Audio Controller
Primary device ID: 1002:437b
Subsystem PCI_id 1002:437b
Softmodem codec or chipset from diagnostics: 0x10573057
from Archives:
The HDA card softmodem chip is 0x10573057
Support type needed or chipset: slmodemd supporting the snd-hda-intel audio+modem driver
An ALSA (Advanced Linux Sound Architecture) modem driver: snd-hda-intel
provides Low Level support enabling contact with the modem hardware.
For all BUT Conexant chip soft modems (using hsfmodem software)
complementary High Level support is through a Smartlink utility: slmodemd
Download from http://linmodems.technion.ac.il/packages/smartlink/
the package SLMODEMD_gcc4.3_alsa1.0.20.tar.gz having a compiled slmodemd. Unpack under Linux with:
$ tar zxf SLMODEMD_gcc4.3_alsa1.0.20.tar.gz
and read instructions therein. But briefly, the modem is setup with command:
slmodemd -c YOUR_COUNTRY --alsa hw:0,6
reporting dynamic creation of ports:
/dev/ttySL0 --> /dev/pts/N , with N some number
Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through guidance.
Writing DOCs/Smartlink.txt
============ end Smartlink section =====================
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.3.2
and the compiler used in kernel assembly: 4.3.2
linux-headers-2.6.30.9-elive-686 resources needed for compiling are not manifestly ready!
If compiling is necessary packages must be installed, providing:
linux-headers-2.6.30.9-elive-686
For Debian and some related distributions, a package kernel-kbuild-2.6-30 may be needed to support driver compiling.
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-- 1 root dip 269156 2008-11-28 12:48 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
auth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
For guidance on FAX usage, get from http://linmodems.technion.ac.il/packages/ get faxing.tar.gz
It has samples for a modem using port /dev/ttySL0, which must be changed to match your modem's port.
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
/etc/udev/rules.d/80-drivers.rules:SUBSYSTEM=="atm", RUN+="dsl-modem.agent"
Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
/etc/modprobe.d/alsa-base-blacklist:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/alsa-base-blacklist:# blacklist snd-atiixp-modem
/etc/modprobe.d/alsa-base-blacklist:# blacklist snd-via82xx-modem
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
For Debian users, the linux-headers-2.6.30.9-elive-686.deb can be used instead of kernel-source/
CPU0 CPU1
0: 325 150708 IO-APIC-edge timer
1: 3 1543 IO-APIC-edge i8042
8: 0 2 IO-APIC-edge rtc0
12: 94 48161 IO-APIC-edge i8042
14: 89 19639 IO-APIC-edge ide0
15: 0 0 IO-APIC-edge ide1
16: 3 683 IO-APIC-fasteoi eth0, HDA Intel
19: 0 2 IO-APIC-fasteoi ohci_hcd:usb1, ehci_hcd:usb2, ohci_hcd:usb3
20: 0 1 IO-APIC-fasteoi yenta, tifm_7xx1
21: 3 952 IO-APIC-fasteoi acpi, firewire_ohci
NMI: 0 0 Non-maskable interrupts
LOC: 106178 53069 Local timer interrupts
SPU: 0 0 Spurious interrupts
RES: 15194 8136 Rescheduling interrupts
CAL: 139 33 Function call interrupts
TLB: 980 705 TLB shootdowns
TRM: 0 0 Thermal event interrupts
ERR: 0
MIS: 0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.30.9-elive-686 (root@Zeus) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 SMP Fri Oct 9 10:25:06 CEST 2009
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000037e80000 (usable)
[ 0.000000] BIOS-e820: 0000000037e80000 - 0000000037e92000 (ACPI data)
[ 0.000000] BIOS-e820: 0000000037e92000 - 0000000037f00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000037f00000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x37e80 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DBFFF uncachable
[ 0.000000] DC000-DFFFF write-back
[ 0.000000] E0000-E3FFF uncachable
[ 0.000000] E4000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
[ 0.000000] 1 base 0038000000 mask FFF8000000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[ 0.000000] RAMDISK: 37608000 - 37e6f909
[ 0.000000] Allocated new RAMDISK: 00638000 - 00e9f909
[ 0.000000] Move RAMDISK from 0000000037608000 - 0000000037e6f908 to 00638000 - 00e9f908
[ 0.000000] ACPI: RSDP 000f8530 00014 (v00 PTLTD )
[ 0.000000] ACPI: RSDT 37e8c396 00038 (v01 GATEWA SYSTEM 20061101 LTP 00000000)
[ 0.000000] ACPI: FACP 37e91bfa 00074 (v01 GATEWA SYSTEM 20061101 ATI 000F4240)
[ 0.000000] ACPI: DSDT 37e8c3ce 0582C (v01 GATEWA SYSTEM 20061101 MSFT 0100000E)
[ 0.000000] ACPI: FACS 37e92fc0 00040
[ 0.000000] ACPI: SSDT 37e91c6e 00182 (v01 GATEWA SYSTEM 20061101 LTP 00000001)
[ 0.000000] ACPI: APIC 37e91df0 0005E (v01 GATEWA SYSTEM 20061101 LTP 00000000)
[ 0.000000] ACPI: MCFG 37e91e4e 0003C (v01 GATEWA SYSTEM 20061101 LTP 00000000)
[ 0.000000] ACPI: SLIC 37e91e8a 00176 (v01 GATEWA SYSTEM 20061101 LTP 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 6MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00011000 - 00017f00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 0000634d64] TEXT DATA BSS ==> [0000100000 - 0000634d64]
[ 0.000000] #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000]
[ 0.000000] #5 [0000635000 - 0000637278] BRK ==> [0000635000 - 0000637278]
[ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #7 [0000638000 - 0000e9f909] NEW RAMDISK ==> [0000638000 - 0000e9f909]
[ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
[ 0.000000] found SMP MP-table at [c00f85d0] f85d0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x00037e80
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x00037e80
[ 0.000000] On node 0 totalpages: 228877
[ 0.000000] free_area_init_node: node 0, pgdat c04f21a0, node_mem_map c1000200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3949 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 14 pages used for memmap
[ 0.000000] HighMem zone: 1652 pages, LIFO batch:0
[ 0.000000] Using APIC driver default
[ 0.000000] SB4X0 revision 0x83
[ 0.000000] Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 11 pages at c1704000, static data 22780 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227087
[ 0.000000] Kernel command line: root=/dev/disk/by-label/Elive_lap-6 vga=normal resume=swap:/dev/disk/by-label/SWP_lap-12 noentrance
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] NR_IRQS:1280
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1595.727 MHz processor.
[ 0.000999] Console: colour VGA+ 80x25
[ 0.000999] console [tty0] enabled
[ 0.000999] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000999] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000999] Initializing HighMem for node 0 (000377fe:00037e80)
[ 0.000999] Memory: 893220k/915968k available (3037k kernel code, 22044k reserved, 1207k data, 364k init, 6664k highmem)
[ 0.000999] virtual kernel memory layout:
[ 0.000999] fixmap : 0xffe16000 - 0xfffff000 (1956 kB)
[ 0.000999] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000999] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000999] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000999] .init : 0xc052c000 - 0xc0587000 ( 364 kB)
[ 0.000999] .data : 0xc03f76fb - 0xc0525644 (1207 kB)
[ 0.000999] .text : 0xc0100000 - 0xc03f76fb (3037 kB)
[ 0.000999] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.001008] Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.45 BogoMIPS (lpj=1595727)
[ 0.001148] Security Framework initialized
[ 0.001200] SELinux: Disabled at boot.
[ 0.001264] Mount-cache hash table entries: 512
[ 0.001439] Initializing cgroup subsys ns
[ 0.001488] Initializing cgroup subsys cpuacct
[ 0.001540] Initializing cgroup subsys devices
[ 0.001588] Initializing cgroup subsys freezer
[ 0.001636] Initializing cgroup subsys net_cls
[ 0.001702] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.001754] CPU: L2 Cache: 256K (64 bytes/line)
[ 0.001802] CPU: Physical Processor ID: 0
[ 0.001849] CPU: Processor Core ID: 0
[ 0.001899] Intel machine check architecture supported.
[ 0.001948] Intel machine check reporting enabled on CPU#0.
[ 0.002003] using C1E aware idle routine
[ 0.002060] Checking 'hlt' instruction... OK.
[ 0.007125] ACPI: Core revision 20090320
[ 0.015502] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.025924] CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-50 stepping 02
[ 0.026995] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.000999] Initializing CPU#1
[ 0.000999] Calibrating delay using timer specific routine.. 3191.35 BogoMIPS (lpj=1595677)
[ 0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.000999] CPU: L2 Cache: 256K (64 bytes/line)
[ 0.000999] CPU: Physical Processor ID: 0
[ 0.000999] CPU: Processor Core ID: 1
[ 0.000999] Intel machine check architecture supported.
[ 0.000999] Intel machine check reporting enabled on CPU#1.
[ 0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.097428] CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-50 stepping 02
[ 0.098094] Brought up 2 CPUs
[ 0.098093] System has AMD C1E enabled
[ 0.098093] Switch to broadcast mode on CPU1
[ 0.098247] Total of 2 processors activated (6382.80 BogoMIPS).
[ 0.098342] CPU0 attaching sched-domain:
[ 0.098345] domain 0: span 0-1 level MC
[ 0.098349] groups: 0 1
[ 0.098355] CPU1 attaching sched-domain:
[ 0.098358] domain 0: span 0-1 level MC
[ 0.098360] groups: 1 0
[ 0.098436] Switch to broadcast mode on CPU0
[ 0.098436] net_namespace: 1088 bytes
[ 0.098436] Booting paravirtualized kernel on bare hardware
[ 0.099122] regulator: core version 0.5
[ 0.099122] NET: Registered protocol family 16
[ 0.099124] ACPI: bus type pci registered
[ 0.099124] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 10
[ 0.099124] PCI: MCFG area at e0000000 reserved in E820
[ 0.099987] PCI: Using MMCONFIG for extended config space
[ 0.100036] PCI: Using configuration type 1 for base access
[ 0.101057] bio: create slab <bio-0> at 0
[ 0.102576] ACPI: EC: Look up EC in DSDT
[ 0.105974] ACPI: Interpreter enabled
[ 0.105991] ACPI: (supports S0 S3 S4 S5)
[ 0.106216] ACPI: Using IOAPIC for interrupt routing
[ 0.110171] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[ 0.111111] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.116110] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.116162] ACPI: EC: driver started in interrupt mode
[ 0.116239] ACPI: No dock devices found.
[ 0.116251] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.117077] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.117128] pci 0000:00:04.0: PME# disabled
[ 0.117209] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.117258] pci 0000:00:05.0: PME# disabled
[ 0.117373] pci 0000:00:13.0: reg 10 32bit mmio: [0xc0004000-0xc0004fff]
[ 0.117480] pci 0000:00:13.1: reg 10 32bit mmio: [0xc0005000-0xc0005fff]
[ 0.117599] pci 0000:00:13.2: reg 10 32bit mmio: [0xc0006000-0xc0006fff]
[ 0.117669] pci 0000:00:13.2: supports D1 D2
[ 0.117671] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.117725] pci 0000:00:13.2: PME# disabled
[ 0.117825] pci 0000:00:14.0: reg 10 io port: [0x8400-0x840f]
[ 0.117835] pci 0000:00:14.0: reg 14 32bit mmio: [0xfed00000-0xfed003ff]
[ 0.117871] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.117935] pci 0000:00:14.1: reg 10 io port: [0x1f0-0x1f7]
[ 0.117935] pci 0000:00:14.1: reg 14 io port: [0x3f4-0x3f7]
[ 0.117935] pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
[ 0.117935] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
[ 0.117935] pci 0000:00:14.1: reg 20 io port: [0x8410-0x841f]
[ 0.117935] pci 0000:00:14.2: reg 10 64bit mmio: [0xc0000000-0xc0003fff]
[ 0.117935] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.117935] pci 0000:00:14.2: PME# disabled
[ 0.117935] pci 0000:01:05.0: reg 10 32bit mmio: [0xc8000000-0xcfffffff]
[ 0.117935] pci 0000:01:05.0: reg 14 io port: [0x9000-0x90ff]
[ 0.117935] pci 0000:01:05.0: reg 18 32bit mmio: [0xc0100000-0xc010ffff]
[ 0.117935] pci 0000:01:05.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.117935] pci 0000:01:05.0: supports D1 D2
[ 0.117935] pci 0000:00:01.0: bridge io port: [0x9000-0x9fff]
[ 0.117935] pci 0000:00:01.0: bridge 32bit mmio: [0xc0100000-0xc01fffff]
[ 0.117935] pci 0000:00:01.0: bridge 64bit mmio pref: [0xc8000000-0xcfffffff]
[ 0.117935] pci 0000:02:00.0: reg 10 64bit mmio: [0xc0200000-0xc0203fff]
[ 0.117935] pci 0000:02:00.0: reg 18 io port: [0xa000-0xa0ff]
[ 0.117935] pci 0000:02:00.0: supports D1 D2
[ 0.117935] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.117935] pci 0000:02:00.0: PME# disabled
[ 0.117935] pci 0000:00:04.0: bridge io port: [0xa000-0xafff]
[ 0.117935] pci 0000:00:04.0: bridge 32bit mmio: [0xc0200000-0xc02fffff]
[ 0.117972] pci 0000:05:00.0: reg 10 32bit mmio: [0xc0300000-0xc0303fff]
[ 0.118044] pci 0000:05:00.0: supports D1 D2
[ 0.118114] pci 0000:00:05.0: bridge 32bit mmio: [0xc0300000-0xc03fffff]
[ 0.118190] pci 0000:08:09.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.118222] pci 0000:08:09.0: supports D1 D2
[ 0.118225] pci 0000:08:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.118278] pci 0000:08:09.0: PME# disabled
[ 0.118383] pci 0000:08:09.1: reg 10 32bit mmio: [0xc0405000-0xc04057ff]
[ 0.118395] pci 0000:08:09.1: reg 14 32bit mmio: [0xc0400000-0xc0403fff]
[ 0.118468] pci 0000:08:09.1: supports D1 D2
[ 0.118470] pci 0000:08:09.1: PME# supported from D0 D1 D2 D3hot
[ 0.118523] pci 0000:08:09.1: PME# disabled
[ 0.118626] pci 0000:08:09.2: reg 10 32bit mmio: [0xc0406000-0xc0406fff]
[ 0.118704] pci 0000:08:09.2: supports D1 D2
[ 0.118707] pci 0000:08:09.2: PME# supported from D0 D1 D2 D3hot
[ 0.118760] pci 0000:08:09.2: PME# disabled
[ 0.118871] pci 0000:00:14.4: transparent bridge
[ 0.118929] pci 0000:00:14.4: bridge 32bit mmio: [0xc0400000-0xc04fffff]
[ 0.118976] pci_bus 0000:00: on NUMA node 0
[ 0.118987] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.119115] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
[ 0.119198] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
[ 0.119293] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.119363] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.123159] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11) *0, disabled.
[ 0.123496] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11) *0, disabled.
[ 0.124150] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11) *0, disabled.
[ 0.124774] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11) *0, disabled.
[ 0.125366] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11) *0, disabled.
[ 0.126033] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11) *0, disabled.
[ 0.126658] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11) *0, disabled.
[ 0.127288] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11) *0, disabled.
[ 0.127912] ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7 10 11) *0, disabled.
[ 0.129011] PCI: Using ACPI for IRQ routing
[ 0.137986] pnp: PnP ACPI init
[ 0.138042] ACPI: bus type pnp registered
[ 0.141088] pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:01:05.0 BAR 6 (0x0-0x1ffff), disabling
[ 0.142064] pnp: PnP ACPI: found 10 devices
[ 0.142096] ACPI: ACPI bus type pnp unregistered
[ 0.142148] PnPBIOS: Disabled by ACPI PNP
[ 0.142209] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.142260] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.142315] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.142315] system 00:08: ioport range 0x1080-0x1080 has been reserved
[ 0.142315] system 00:08: ioport range 0x220-0x22f has been reserved
[ 0.142315] system 00:08: ioport range 0x40b-0x40b has been reserved
[ 0.142315] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.142315] system 00:08: ioport range 0x4d6-0x4d6 has been reserved
[ 0.142315] system 00:08: ioport range 0x530-0x537 has been reserved
[ 0.142347] system 00:08: ioport range 0xc00-0xc01 has been reserved
[ 0.142398] system 00:08: ioport range 0xc14-0xc14 has been reserved
[ 0.142449] system 00:08: ioport range 0xc50-0xc52 has been reserved
[ 0.142499] system 00:08: ioport range 0xc6c-0xc6c has been reserved
[ 0.142549] system 00:08: ioport range 0xc6f-0xc6f has been reserved
[ 0.142601] system 00:08: ioport range 0xcd4-0xcd5 has been reserved
[ 0.142651] system 00:08: ioport range 0xcd6-0xcd7 has been reserved
[ 0.142702] system 00:08: ioport range 0xcd8-0xcdf has been reserved
[ 0.142752] system 00:08: ioport range 0x8000-0x805f has been reserved
[ 0.142803] system 00:08: ioport range 0xf40-0xf47 has been reserved
[ 0.142857] system 00:08: ioport range 0x87f-0x87f has been reserved
[ 0.142911] system 00:09: iomem range 0xe0000-0xfffff could not be reserved
[ 0.142981] system 00:09: iomem range 0xfff00000-0xffffffff could not be reserved
[ 0.177724] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.177775] pci 0000:00:01.0: IO window: 0x9000-0x9fff
[ 0.177826] pci 0000:00:01.0: MEM window: 0xc0100000-0xc01fffff
[ 0.177877] pci 0000:00:01.0: PREFETCH window: 0x000000c8000000-0x000000cfffffff
[ 0.177934] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02
[ 0.177975] pci 0000:00:04.0: IO window: 0xa000-0xafff
[ 0.179011] Switched to high resolution mode on CPU 0
[ 0.179065] Switched to high resolution mode on CPU 1
[ 0.179069] pci 0000:00:04.0: MEM window: 0xc0200000-0xc02fffff
[ 0.179119] pci 0000:00:04.0: PREFETCH window: disabled
[ 0.179170] pci 0000:00:05.0: PCI bridge, secondary bus 0000:05
[ 0.179219] pci 0000:00:05.0: IO window: disabled
[ 0.179281] pci 0000:00:05.0: MEM window: 0xc0300000-0xc03fffff
[ 0.179333] pci 0000:00:05.0: PREFETCH window: disabled
[ 0.179391] pci 0000:08:09.0: CardBus bridge, secondary bus 0000:09
[ 0.179441] pci 0000:08:09.0: IO window: 0x002000-0x0020ff
[ 0.179494] pci 0000:08:09.0: IO window: 0x002400-0x0024ff
[ 0.179548] pci 0000:08:09.0: PREFETCH window: 0x50000000-0x53ffffff
[ 0.179601] pci 0000:08:09.0: MEM window: 0x54000000-0x57ffffff
[ 0.179654] pci 0000:00:14.4: PCI bridge, secondary bus 0000:08
[ 0.179705] pci 0000:00:14.4: IO window: 0x2000-0x2fff
[ 0.179759] pci 0000:00:14.4: MEM window: 0xc0400000-0xc04fffff
[ 0.179811] pci 0000:00:14.4: PREFETCH window: 0x00000050000000-0x00000053ffffff
[ 0.179881] pci 0000:00:04.0: setting latency timer to 64
[ 0.179887] pci 0000:00:05.0: setting latency timer to 64
[ 0.179908] pci 0000:08:09.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.179965] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.179968] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.179971] pci_bus 0000:01: resource 0 io: [0x9000-0x9fff]
[ 0.179975] pci_bus 0000:01: resource 1 mem: [0xc0100000-0xc01fffff]
[ 0.179978] pci_bus 0000:01: resource 2 pref mem [0xc8000000-0xcfffffff]
[ 0.179982] pci_bus 0000:02: resource 0 io: [0xa000-0xafff]
[ 0.179985] pci_bus 0000:02: resource 1 mem: [0xc0200000-0xc02fffff]
[ 0.179988] pci_bus 0000:05: resource 1 mem: [0xc0300000-0xc03fffff]
[ 0.179991] pci_bus 0000:08: resource 0 io: [0x2000-0x2fff]
[ 0.179995] pci_bus 0000:08: resource 1 mem: [0xc0400000-0xc04fffff]
[ 0.179998] pci_bus 0000:08: resource 2 pref mem [0x50000000-0x53ffffff]
[ 0.180001] pci_bus 0000:08: resource 3 io: [0x00-0xffff]
[ 0.180004] pci_bus 0000:08: resource 4 mem: [0x000000-0xffffffff]
[ 0.180026] pci_bus 0000:09: resource 0 io: [0x2000-0x20ff]
[ 0.180029] pci_bus 0000:09: resource 1 io: [0x2400-0x24ff]
[ 0.180032] pci_bus 0000:09: resource 2 pref mem [0x50000000-0x53ffffff]
[ 0.180035] pci_bus 0000:09: resource 3 mem: [0x54000000-0x57ffffff]
[ 0.180131] NET: Registered protocol family 2
[ 0.191383] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.191874] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.192597] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.192961] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.193020] TCP reno registered
[ 0.195412] NET: Registered protocol family 1
[ 0.195527] Trying to unpack rootfs image as initramfs...
[ 0.506462] Freeing initrd memory: 8606k freed
[ 0.513398] audit: initializing netlink socket (disabled)
[ 0.513463] type=2000 audit(1272462930.513:1): initialized
[ 0.513809] highmem bounce pool size: 64 pages
[ 0.513862] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.514092] VFS: Disk quotas dquot_6.5.2
[ 0.514182] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.514543] aufs 2-standalone.tree-30-20090921
[ 0.514596] msgmni has been set to 1748
[ 0.515028] alg: No test for stdrng (krng)
[ 0.515182] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.515239] io scheduler noop registered
[ 0.515328] io scheduler anticipatory registered
[ 0.515376] io scheduler deadline registered
[ 0.515453] io scheduler cfq registered (default)
[ 0.515510] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[ 0.515623] pci 0000:01:05.0: Boot video device
[ 0.515921] pcieport-driver 0000:00:04.0: setting latency timer to 64
[ 0.516034] pcieport-driver 0000:00:05.0: setting latency timer to 64
[ 0.520824] isapnp: Scanning for PnP cards...
[ 0.877894] isapnp: No Plug & Play device found
[ 0.877945] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.881100] brd: module loaded
[ 0.881288] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 0.883434] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.883488] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.883690] mice: PS/2 mouse device common for all mice
[ 0.883835] rtc_cmos 00:04: RTC can wake from S4
[ 0.883967] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.884064] rtc0: alarms up to one month, 114 bytes nvram
[ 0.884249] cpuidle: using governor ladder
[ 0.884322] cpuidle: using governor menu
[ 0.884374] No iBFT detected.
[ 0.884877] TCP cubic registered
[ 0.885005] NET: Registered protocol family 10
[ 0.885642] lo: Disabled Privacy Extensions
[ 0.886086] Mobile IPv6
[ 0.886133] NET: Registered protocol family 17
[ 0.886189] Using IPI No-Shortcut mode
[ 0.886465] TuxOnIce 3.0.1 (http://tuxonice.net)
[ 0.912375] input: AT Translated Set 2 keyboard as /class/input/input0
[ 0.916633] TuxOnIce: Can't translate "/dev/disk/by-label/SWP_lap-12" into a device id yet.
[ 0.916706] registered taskstats version 1
[ 0.916928] rtc_cmos 00:04: setting system clock to 2010-04-28 13:55:31 UTC (1272462931)
[ 0.917072] Freeing unused kernel memory: 364k freed
[ 0.917432] Write protecting the kernel text: 3040k
[ 0.917527] Write protecting the kernel read-only data: 828k
[ 1.100490] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.100558] ACPI: Thermal Zone [THRM] (69 C)
[ 1.599163] usbcore: registered new interface driver usbfs
[ 1.599254] usbcore: registered new interface driver hub
[ 1.599338] usbcore: registered new device driver usb
[ 1.601529] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.601613] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.601679] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.601776] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[ 1.601862] ohci_hcd 0000:00:13.0: irq 19, io mem 0xc0004000
[ 1.604482] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.604536] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 1.652087] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.652144] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.652199] usb usb1: Product: OHCI Host Controller
[ 1.652248] usb usb1: Manufacturer: Linux 2.6.30.9-elive-686 ohci_hcd
[ 1.652303] usb usb1: SerialNumber: 0000:00:13.0
[ 1.652439] usb usb1: configuration #1 chosen from 1 choice
[ 1.652524] hub 1-0:1.0: USB hub found
[ 1.653081] hub 1-0:1.0: 4 ports detected
[ 1.653284] ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.653354] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.653428] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.653538] ehci_hcd 0000:00:13.2: irq 19, io mem 0xc0006000
[ 1.659018] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.659086] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.659136] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.659191] usb usb2: Product: EHCI Host Controller
[ 1.659240] usb usb2: Manufacturer: Linux 2.6.30.9-elive-686 ehci_hcd
[ 1.659295] usb usb2: SerialNumber: 0000:00:13.2
[ 1.659408] usb usb2: configuration #1 chosen from 1 choice
[ 1.659489] hub 2-0:1.0: USB hub found
[ 1.659543] hub 2-0:1.0: 8 ports detected
[ 1.660089] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.660162] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.660261] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 1.660337] ohci_hcd 0000:00:13.1: irq 19, io mem 0xc0005000
[ 1.711073] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.711131] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.711187] usb usb3: Product: OHCI Host Controller
[ 1.711235] usb usb3: Manufacturer: Linux 2.6.30.9-elive-686 ohci_hcd
[ 1.711289] usb usb3: SerialNumber: 0000:00:13.1
[ 1.711429] usb usb3: configuration #1 chosen from 1 choice
[ 1.711516] hub 3-0:1.0: USB hub found
[ 1.711577] hub 3-0:1.0: 4 ports detected
[ 1.805706] Uniform Multi-Platform E-IDE driver
[ 1.810330] b43-pci-bridge 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.810398] b43-pci-bridge 0000:05:00.0: setting latency timer to 64
[ 1.813790] sky2 driver version 1.22
[ 1.813886] sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.813949] sky2 0000:02:00.0: setting latency timer to 64
[ 1.813983] sky2 0000:02:00.0: Yukon-2 FE chip revision 1
[ 1.814816] sky2 eth0: addr 00:e0:b8:bb:00:27
[ 1.816113] atiixp 0000:00:14.1: IDE controller (0x1002:0x4376 rev 0x80)
[ 1.816179] ATIIXP_IDE 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.816253] atiixp 0000:00:14.1: not 100% native mode: will probe irqs later
[ 1.816310] ide0: BM-DMA at 0x8410-0x8417
[ 1.816365] atiixp 0000:00:14.1: simplex device: DMA disabled
[ 1.816413] ide1: DMA disabled
[ 1.816461] Probing IDE interface ide0...
[ 1.842828] firewire_ohci 0000:08:09.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.853417] ssb: Sonics Silicon Backplane found on PCI device 0000:05:00.0
[ 1.899033] firewire_ohci: Added fw-ohci device 0000:08:09.1, OHCI version 1.10
[ 1.899507] yenta_cardbus 0000:08:09.0: CardBus bridge found [107b:0367]
[ 1.899585] yenta_cardbus 0000:08:09.0: Using CSCINT to route CSC interrupts to PCI
[ 1.899641] yenta_cardbus 0000:08:09.0: Routing CardBus interrupts to PCI
[ 1.899695] yenta_cardbus 0000:08:09.0: TI: mfunc 0x01ac1b22, devctl 0x64
[ 2.108501] hda: HTS421212H9AT00, ATA DISK drive
[ 2.122999] yenta_cardbus 0000:08:09.0: ISA IRQ mask 0x0ef8, PCI irq 20
[ 2.123068] yenta_cardbus 0000:08:09.0: Socket status: 30000006
[ 2.123136] yenta_cardbus 0000:08:09.0: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[ 2.123193] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff: clean.
[ 2.123520] yenta_cardbus 0000:08:09.0: pcmcia: parent PCI bridge Memory window: 0xc0400000 - 0xc04fffff
[ 2.123578] yenta_cardbus 0000:08:09.0: pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
[ 2.399380] firewire_core: created device fw0: GUID 00e0b80367030237, S400
[ 2.873059] hdb: HL-DT-ST DVDRAM GSA-T10N, ATAPI CD/DVD-ROM drive
[ 2.873248] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 2.873508] hda: UDMA/100 mode selected
[ 2.873800] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 2.874621] hdb: UDMA/33 mode selected
[ 2.875134] Probing IDE interface ide1...
[ 3.388108] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 3.418719] ide1 at 0x170-0x177,0x376 on irq 15
[ 3.440147] SCSI subsystem initialized
[ 3.460871] libata version 3.00 loaded.
[ 3.489312] ide-gd driver 1.18
[ 3.489404] hda: max request size: 512KiB
[ 3.489767] hda: 234441648 sectors (120034 MB) w/7528KiB Cache, CHS=16383/255/63
[ 3.490240] hda: cache flushes supported
[ 3.490359] hda: hda1 hda2 hda3 hda4 <<6>ide-cd driver 5.00
[ 3.523675] hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 >
[ 3.729779] ide-cd: hdb: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache
[ 3.730084] Uniform CD-ROM driver Revision: 3.20
[ 5.309502] PM: Starting manual resume from disk
[ 5.327640] TuxOnIce: Normal swapspace found.
[ 7.697878] udevd version 125 started
[ 8.427207] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 8.429727] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[ 8.430799] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 8.431701] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 8.432625] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 9.269165] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 9.277903] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.292839] Linux agpgart interface v0.103
[ 9.374983] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8400, revision 0
[ 9.521758] input: PC Speaker as /class/input/input1
[ 9.555978] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 9.852167] input: Power Button as /class/input/input2
[ 9.852270] ACPI: Power Button [PWRF]
[ 9.852394] input: Lid Switch as /class/input/input3
[ 9.865378] ACPI: Lid Switch [LID]
[ 9.875491] ACPI: AC Adapter [ACAD] (on-line)
[ 9.876045] input: Sleep Button as /class/input/input4
[ 9.876142] ACPI: Sleep Button [SLPB]
[ 9.876310] input: Power Button as /class/input/input5
[ 9.876394] ACPI: Power Button [PWRB]
[ 10.026959] ACPI: processor limited to max C-state 1
[ 10.027072] processor ACPI_CPU:00: registered as cooling_device0
[ 10.027124] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 10.027286] processor ACPI_CPU:01: registered as cooling_device1
[ 10.330286] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[ 10.330377] [Firmware Bug]: _BCQ is used instead of _BQC
[ 10.377083] acpi device:1c: registered as cooling_device2
[ 10.377291] input: Video Bus as /class/input/input6
[ 10.377380] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 10.436665] tifm_7xx1 0000:08:09.2: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 10.510763] ACPI: Battery Slot [BAT1] (battery present)
[ 10.977174] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 11.223846] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x23aeb3, caps: 0xa04713/0x10008
[ 11.256665] input: SynPS/2 Synaptics TouchPad as /class/input/input7
[ 11.338578] input: HDA ATI SB Mic at Ext Front Jack as /class/input/input8
[ 13.268028] Adding 995988k swap on /dev/hda12. Priority:-1 extents:1 across:995988k
[ 34.511152] fuse init (API version 7.11)
[ 37.309664] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-50 processors (2 cpu cores) (version 2.20.00)
[ 37.309731] powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x12
[ 37.309736] powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x14
[ 40.041605] lp: driver loaded but no devices found
[ 40.184100] Clocksource tsc unstable (delta = -252367208 ns)
[ 40.205702] ppdev: user-space parallel port driver
[ 48.609056] sky2 eth0: enabling interface
[ 48.613651] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 49.768980] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 50.473656] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 50.474041] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 61.462049] eth0: no IPv6 routers present
Module Size Used by
xt_multiport 2924 1
iptable_filter 3084 1
ip_tables 11580 1 iptable_filter
x_tables 15984 2 xt_multiport,ip_tables
ppdev 7344 0
parport_pc 24836 0
lp 8804 0
parport 34892 3 ppdev,parport_pc,lp
powernow_k8 13808 1
cpufreq_userspace 2832 0
cpufreq_stats 3984 0
cpufreq_powersave 1324 0
cpufreq_conservative 7136 0
fuse 57192 1
joydev 10112 0
snd_hda_codec_si3054 4652 1
snd_hda_codec_idt 57900 1
snd_hda_intel 25128 2
snd_hda_codec 74540 3 snd_hda_codec_si3054,snd_hda_codec_idt,snd_hda_intel
snd_hwdep 7120 1 snd_hda_codec
snd_pcm_oss 38720 0
snd_mixer_oss 15852 1 snd_pcm_oss
snd_pcm 74384 4 snd_hda_codec_si3054,snd_hda_intel,snd_hda_codec,snd_pcm_oss
psmouse 42556 0
serio_raw 5200 0
battery 10064 0
tifm_7xx1 5420 0
tifm_core 7624 1 tifm_7xx1
video 18240 0
output 2764 1 video
snd_seq_dummy 2544 0
processor 34496 1 powernow_k8
snd_seq_oss 28096 0
ac 3952 0
button 5148 0
snd_seq_midi 6304 0
snd_rawmidi 21632 1 snd_seq_midi
snd_seq_midi_event 6956 2 snd_seq_oss,snd_seq_midi
k8temp 4332 0
snd_seq 50352 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
pcspkr 2252 0
i2c_piix4 9852 0
snd_timer 20788 2 snd_pcm,snd_seq
snd_seq_device 6904 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
i2c_core 23872 1 i2c_piix4
ati_agp 6808 0
agpgart 34572 1 ati_agp
shpchp 32064 0
pci_hotplug 27756 1 shpchp
snd 57220 17 snd_hda_codec_si3054,snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 6944 1 snd
snd_page_alloc 8852 2 snd_hda_intel,snd_pcm
evdev 9568 8
ext2 65300 4
mbcache 7440 1 ext2
ide_cd_mod 27952 0
cdrom 35456 1 ide_cd_mod
ide_gd_mod 23280 6
ata_generic 4592 0
libata 174380 1 ata_generic
scsi_mod 151156 1 libata
ide_pci_generic 3824 0
yenta_socket 23928 1
rsrc_nonstatic 11564 1 yenta_socket
firewire_ohci 22544 0
firewire_core 44000 1 firewire_ohci
crc_itu_t 2188 1 firewire_core
atiixp 3440 5
sky2 45776 0
ssb 45044 0
pcmcia 28096 1 ssb
pcmcia_core 35648 4 yenta_socket,rsrc_nonstatic,ssb,pcmcia
ide_core 101736 4 ide_cd_mod,ide_gd_mod,ide_pci_generic,atiixp
ehci_hcd 35448 0
ohci_hcd 23132 0
usbcore 148560 3 ehci_hcd,ohci_hcd
thermal 12680 0
fan 4048 0
thermal_sys 15476 4 video,processor,thermal,fan
