Goran, scanModem recommends the agrsm-11c11040_20091225_i386.deb and agrsm-tools_0.0.1_all.deb packages: Do download: http://linmodems.technion.ac.il/packages/ltmodem/11c11040/agrsm-11c11040_20091225_i386.deb http://linmodems.technion.ac.il/packages/ltmodem/11c11040/agrsm-tools_0.0.1_all.deb and dkms- package: http://linmodems.technion.ac.il/packages/ltmodem/11c11040/dkms-agrsm_2.1.80-7_i386.deb Copy to your linux partition Install the dkms-agrsm* package first then the others. Use $ sudo dpkg -i dksm-agrsm* to install the packages. Do install the dkms-agrsm package as it will automate the building of the driver for subsequent kernels. Predictive diagnostics for card in bus 00:1b.0: Modem chipset detected on NAME="Audio device: Intel Corporation 82801H " CLASS=0403 PCIDEV=8086:284b SUBSYS=103c:3618 IRQ=16 HDA2=00:1b.0 SOFT=8086:284b.HDA HDAchipVendorID=11c1 CHIP=0x11c11040 IDENT=agrsm Driver=agrsm For candidate modem in: 00:1b.0 0403 Audio device: Intel Corporation 82801H Primary device ID: 8086:284b Subsystem PCI_id 103c:3618 Softmodem codec or chipset from diagnostics: 0x11c11040 from Archives: The HDA card softmodem chip is 0x11c11040 Support type needed or chipset: agrsm Writing DOCs/Intel.txt The AgereSystems/LSI agrsm code supports compiling of a agrmodem + agrserial driver pair. There are a few different chipsets which use this driver pair, but they use different code resources: Chipsets KV* PackageNames (most current as of November 2009) ---------------------------------------------------------------------------------------------- 11c1:048c and 11c1:048f 2.6.29 agrsm048pci-2.1.60_20100108_i386.deb or agrsm048pci-2.1.60_20100108.tar.gz 11c1:0620 2.6.31 agrsm06pci-2.1.80_20100106_i386.deb or agrsm06pci-2.1.80~20100106.tar.gz !! 11c11040 (on HDA audio cards) 2.6.31 agrsm-11c11040_20091225_i386.deb or agrsm-11c11040-2.1.80~20091225.tar.bz2 !! All available at: http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ Additionally there are; automation & testing agrsm-tools_0.0.1_all.deb or agrsm-tools-0.0.1-2.noarch.rpm General background agrsm_howto.txt ------------------------------------------------------------------------------------------------ * KV == latest kernel release with a reported success !! Latest update with major credit to Nikolay Zhuravlev But see conflict issue: http://linmodems.technion.ac.il/bigarch/archive-nineth/msg02753.html For the 11c11040 chip with kernels 2.6.31 and later a change in a modules loading settingmay be necessary. Within the file /etc/modprobe.d/alsa-base.conf (or equivalent for your Distro), change the phrase: options snd-hda-intel power_save=10 to: options snd-hda-intel power_save=0 or the agrsm drivers will not function. For Ubuntu related systems this can be done with: $ sudo gedit /etc/modprobe.d/alsa-base.conf Report from Bjorn Wielens: Please note- trying to load the modules on a OpenSuSE 11.2 system gives an error about the module_version symbol. Using: # modprobe --force agrmodem # modprobe --force agrserial is necessary to load the drivers, and does not appear to cause ill effects. All of the above packages are dkms competent. This means that if your Linux distros dkms package is previously installed, if provides for future updates matching forthcoming kernels. -------------- end Agere Systems section ------------------- After installation of drivers, a reboot may be necessary*, then run $ sudo wvdialconf /etc/wvdial.conf to see if wvdial finds the modem port. And all that will remain would be to add username, password, and ISP phone number. You may read Modem/DOCs/agrsm.txt for more details should the need arise. Regards, Antonio On Thu, Apr 22, 2010 at 4:07 PM, Goran Bekavac <goran.bekavac@xxxxxxxxx> wrote: > >
