RE: hojji@hojji-laptop ~/Desktop $ agrsm-test must be run with Root/Adm permission: $ sudo agrsm-test or $ sudo su root # agrsm-test MarvS On Mon, Apr 19, 2010 at 6:35 PM, Antonio Olivares <olivares14031@xxxxxxxxx> wrote: > Hojjat, > > Please forgive me for not replying sooner, but I have been kind of > busy. I have responded as best I can and will CC: to list so that > others may help in case I take too long to respond: > > You installed the agrsm-11c11040-1225 package and the agrsm-test > package too. Did you install dkms package? > > > http://linmodems.technion.ac.il/packages/ltmodem/11c11040/dkms-agrsm_2.1.80-7_i386.deb > > > There two are installed: > ============================================ > > http://linmodems.technion.ac.il/packages/ltmodem/11c11040/agrsm-11c11040_20091225_i386.deb > > http://linmodems.technion.ac.il/packages/ltmodem/11c11040/agrsm-tools_0.0.1_all.deb > > ============================================ > > > Run below command with > $ sudo ./agrsm-test > ============================================ > > hojji@hojji-laptop ~/Desktop $ agrsm-test > > Found drivers for boot kernel 2.6.28-11-generic at: > /lib/modules/2.6.28-11-generic/kernel/dkms/updates/agrmodem.ko > /lib/modules/2.6.28-11-generic/kernel/dkms/updates/agrserial.ko > > > tee: ./agrsm-test.txt: Permission denied > > Loading drivers: > FATAL: Error inserting agrmodem > (/lib/modules/2.6.28-11-generic/kernel/dkms/updates/agrmodem.ko): > Operation not permitted > FATAL: Error inserting agrserial > (/lib/modules/2.6.28-11-generic/kernel/dkms/updates/agrserial.ko): > Operation not permitted > ln: creating symbolic link `/dev/ttySAGR': Permission denied > FATAL: Error running install command for agrserial > > Checking for utility wvdialconf > Found /usr/bin/wvdialconf, preparing to run: > wvdialconf /etc/wvdial.conf > > Modem Port Scan<*1>: S0 S1 S2 S3 > > A reboot may be necessary before modem detection through: > sudo modprobe agrserial > Which will load agrmodem, agrserial and create the symbolic link needed for: > sudo wvdialconf > > > The installation record has been written to ./agrsm-test.txt > > > hojji@hojji-laptop ~/Desktop $ > > ============================================ > > Should have been > > $ sudo lsmod | grep 'agr*' > > > hojji@hojji-laptop ~/Desktop $ sudo lsmod /grep 'agr*' > Usage: lsmod > hojji@hojji-laptop ~/Desktop $ sudo lsmod > Module Size Used by > nls_iso8859_1 12032 2 > nls_cp437 13696 2 > vfat 18816 2 > fat 58272 1 vfat > binfmt_misc 16776 1 > radeon 342816 2 > drm 96296 3 radeon > ppdev 15620 0 > bridge 56340 0 > stp 10500 1 bridge > bnep 20224 2 > lp 17156 0 > parport 42220 2 ppdev,lp > snd_hda_intel 435636 3 > snd_pcm_oss 46336 0 > snd_mixer_oss 22656 1 snd_pcm_oss > arc4 9856 2 > snd_pcm 82948 2 snd_hda_intel,snd_pcm_oss > ecb 10752 2 > snd_seq_dummy 10756 0 > snd_seq_oss 37760 0 > snd_seq_midi 14336 0 > snd_rawmidi 29696 1 snd_seq_midi > iwlagn 100228 0 > iwlcore 93184 1 iwlagn > uvcvideo 63240 0 > snd_seq_midi_event 15104 2 snd_seq_oss,snd_seq_midi > snd_seq 56880 6 > snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event > led_class 12036 1 iwlcore > psmouse 61972 0 > intel_agp 34108 0 > compat_ioctl32 9344 1 uvcvideo > snd_timer 29704 2 snd_pcm,snd_seq > snd_seq_device 14988 5 > snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq > joydev 18368 0 > iTCO_wdt 19108 0 > mac80211 217208 2 iwlagn,iwlcore > video 25360 0 > videodev 41600 1 uvcvideo > snd 62628 15 > snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device > soundcore 15200 1 snd > sdhci_pci 15232 0 > sdhci 23940 1 sdhci_pci > serio_raw 13316 0 > pcspkr 10496 0 > agpgart 42696 2 drm,intel_agp > output 11008 1 video > iTCO_vendor_support 11652 1 iTCO_wdt > v4l1_compat 21764 2 uvcvideo,videodev > usbhid 42336 0 > input_polldev 11912 0 > snd_page_alloc 16904 2 snd_hda_intel,snd_pcm > cfg80211 38032 3 iwlagn,iwlcore,mac80211 > usb_storage 82880 2 > ohci1394 38576 0 > ieee1394 94660 1 ohci1394 > r8169 40836 0 > mii 13312 1 r8169 > fbcon 46112 0 > tileblit 10752 1 fbcon > font 16384 1 fbcon > bitblit 13824 1 fbcon > softcursor 9984 1 bitblit > hojji@hojji-laptop ~/Desktop $ > > ============================================ > The drivers were apparently cranked out/compiled for the kernel, but > there was hda_write? error: > > Apr 20 09:20:03 hojji-laptop kernel: [ 134.519948] agrmodem: Unknown > symbol snd_hda_codec_read > Apr 20 09:20:03 hojji-laptop kernel: [ 134.520173] agrmodem: Unknown > symbol snd_hda_codec_write > > That is positive, but maybe that is not correct? > > ============================================ > > Apr 20 09:18:46 hojji-laptop kernel: [ 56.936010] hda_intel: > azx_get_response timeout, switching to polling mode: last > cmd=0x006f000a > Apr 20 09:19:11 hojji-laptop sudo: pam_sm_authenticate: Called > Apr 20 09:19:11 hojji-laptop sudo: pam_sm_authenticate: username = [hojji] > Apr 20 09:19:11 hojji-laptop sudo: Warning: Using default salt value > (undefined in ~/.ecryptfsrc) > Apr 20 09:20:02 hojji-laptop sudo: pam_sm_authenticate: Called > Apr 20 09:20:02 hojji-laptop sudo: pam_sm_authenticate: username = [hojji] > Apr 20 09:20:02 hojji-laptop sudo: Warning: Using default salt value > (undefined in ~/.ecryptfsrc) > Apr 20 09:20:03 hojji-laptop kernel: [ 134.519948] agrmodem: Unknown > symbol snd_hda_codec_read > Apr 20 09:20:03 hojji-laptop kernel: [ 134.520173] agrmodem: Unknown > symbol snd_hda_codec_write > > Marv, > > Does this mean that the package did not write the agrmodem/agrserial > kernel modules correctly? > ============================================ > > $ sudo wvdialconf /etc/wvdial.conf > > did not find modem port. Did you reboot? > and see if it is enabled? > > ============================================ > > hojji@hojji-laptop ~/Desktop $ sudo wvdialconf /etc/wvdial.conf > Editing `/etc/wvdial.conf'. > > Scanning your serial ports for a modem. > > Modem Port Scan<*1>: S0 S1 S2 S3 SAGR > > > Sorry, no modem was detected! Is it in use by another program? > Did you configure it properly with setserial? > > Please read the FAQ at http://open.nit.ca/wiki/?WvDial > > If you still have problems, send mail to <wvdial-list@xxxxxxxxxxxx>. > hojji@hojji-laptop ~/Desktop $ > > ============================================ > > Hojjat, if you reboot and apply same test and all returns same thing, > please send it back to list (discuss@xxxxxxxxxxxxx) and we'll try to > help. Hope that this time everything works. > > Regards, > > Antonio > > > On 4/19/10, hojjat nazari <dr.hojjatnazari@xxxxxxxxx> wrote: >> I am waiting for reply. Thank you. >> >> On 4/19/10, Antonio Olivares <olivares14031@xxxxxxxxx> wrote: >>> Hojjat, >>> >>> I apologize but I was busy at work. I will try to get back as soon as >>> I can. Please forgive me or send to list(discuss@xxxxxxxxxxxxx), >>> maybe someone can help faster? >>> >>> Apologies. I will get back as soon as I can. >>> >>> Regards, >>> >>> Antonio >>> >>> On Mon, Apr 19, 2010 at 1:32 PM, hojjat nazari >>> <dr.hojjatnazari@xxxxxxxxx> wrote: >>>> Hello Antonio i am hojjat . i I am entered your order. But not >>>> >>>> detect my modem.my sen attachments for you. I hope to help me. >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> On 4/18/10, hojjat nazari <dr.hojjatnazari@xxxxxxxxx> wrote: >>>>> hello Antonio. >>>>> >>>>> On 4/18/10, Antonio Olivares <olivares14031@xxxxxxxxx> wrote: >>>>>> Hojjat, >>>>>> >>>>>> Install dkms-agrsm_2.1.80-7_i386.deb package first then install >>>>>> agrsm-11c11040, followed by agrsm-tools. Antony another user has >>>>>> reported success using those steps. After installing and rebooting, >>>>>> run ./agrsm-tools and its output should be like: >>>>>> >>>>>> Found drivers for boot kernel 2.6.31-20-generic at: >>>>>> /lib/modules/2.6.31-20-generic/updates/dkms/agrserial.ko >>>>>> /lib/modules/2.6.31-20-generic/updates/dkms/agrmodem.ko >>>>>> /lib/modules/2.6.31-20-generic/extra/agrserial.ko >>>>>> /lib/modules/2.6.31-20-generic/extra/agrmodem.ko >>>>>> >>>>>> >>>>>> >>>>>> Loading drivers: >>>>>> >>>>>> Drivers loaded: >>>>>> agrserial 12032 0 >>>>>> agrmodem 1250948 1 >>>>>> snd_hda_codec 75708 4 >>>>>> agrmodem,snd_hda_codec_intelhdmi,snd_hda_codec_analog,snd_hda_intel >>>>>> snd 59204 18 >>>>>> agrmodem,snd_hda_codec_intelhdmi,snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device >>>>>> >>>>>> and symbolic link created: >>>>>> lrwxrwxrwx 1 root root 12 2010-04-18 14:07 /dev/ttySAGR -> >>>>>> /dev/ttyAGS3 >>>>>> >>>>>> Checking for utility wvdialconf >>>>>> Found /usr/bin/wvdialconf, preparing to run: >>>>>> wvdialconf /etc/wvdial.conf >>>>>> A file /etc/wvdial.conf already exists, first renaming to >>>>>> /etc/wvdial.201004180704 >>>>>> >>>>>> Modem Port Scan<*1>: S0 S1 S2 S3 >>>>>> ttySAGR<*1>: ATQ0 V1 E1 -- OK >>>>>> ttySAGR<*1>: ATQ0 V1 E1 Z -- OK >>>>>> ttySAGR<*1>: ATQ0 V1 E1 S0=0 -- OK >>>>>> ttySAGR<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK >>>>>> ttySAGR<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK >>>>>> ttySAGR<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK >>>>>> ttySAGR<*1>: Modem Identifier: ATI -- Agere SoftModem Version 2.1.80.0 >>>>>> ttySAGR<*1>: Speed 4800: AT -- OK >>>>>> ttySAGR<*1>: Speed 9600: AT -- OK >>>>>> ttySAGR<*1>: Speed 19200: AT -- OK >>>>>> ttySAGR<*1>: Speed 38400: AT -- OK >>>>>> ttySAGR<*1>: Speed 57600: AT -- OK >>>>>> ttySAGR<*1>: Speed 115200: AT -- OK >>>>>> ttySAGR<*1>: Max speed is 115200; that should be safe. >>>>>> ttySAGR<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK >>>>>> /etc/wvdial.conf<Warn>: Can't open '/etc/wvdial.conf' for reading: No >>>>>> such file or directory >>>>>> /etc/wvdial.conf<Warn>: ...starting with blank configuration. >>>>>> ttySAGR<Info>: Speed 115200; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" >>>>>> Found a modem on /dev/ttySAGR. >>>>>> >>>>>> Modem detection successful >>>>>> Read wdial.txt >>>>>> Then edit /etc/wvdial.conf with: >>>>>> sudo gedit /etc/wvdial.conf >>>>>> at the lines beginning with ; and deleting the ; < > " >>>>>> Then try a dialout with: >>>>>> sudo wvdial >>>>>> >>>>>> Itf that fails, send us what you get on the terminal with out put from >>>>>> ./agrsm-test and >>>>>> or >>>>>> $ sudo lsmod | grep 'agr*' >>>>>> and >>>>>> $ tail -f /var/log/messages >>>>>> when attempting to query the modem via >>>>>> $ sudo wvdialconf /etc/wvdial.conf >>>>>> >>>>>> Let us know(mail back to list (discuss@xxxxxxxxxxxxx)) how that goes >>>>>> and hopefully you get the modem working. >>>>>> >>>>>> Regards, >>>>>> >>>>>> Antonio >>>>>> >>>>>> On 4/18/10, hojjat nazari <dr.hojjatnazari@xxxxxxxxx> wrote: >>>>>>> hello antonio i am hojjat.tanks for help me. >>>>>>> I am install agrsm-11c11040_20091225_i386.deb >>>>>>> ,agrsm-tools-0.0.1_all.deb >>>>>>> dkms-agrsm_2.1.80-7_i386.deb. >>>>>>> But i run wvdial.conf my modem is not detect. >>>>>>> >>>>>> >>>>> >>>> >>> >> >
