Antony,
Your modem is supported through agrsm-11c11040 modem drivers
Do download:
agrsm-11c11040_20091225_i386.deb
and
agrsm-tools_0.0.1_all.deb
install with
$ sudo dpkg -i agrsm*
as scanModem reports:
Predictive diagnostics for card in bus 00:1b.0:
Modem chipset detected on
NAME="Audio device: Intel Corporation 82801I "
CLASS=0403
PCIDEV=8086:293e
SUBSYS=103c:3072
IRQ=17
HDA2=00:1b.0
SOFT=8086:293e.HDA
HDAchipVendorID=11c1
CHIP=0x11c11040
IDENT=agrsm
Driver=agrsm
For candidate modem in: 00:1b.0
0403 Audio device: Intel Corporation 82801I
Primary device ID: 8086:293e
Subsystem PCI_id 103c:3072
Softmodem codec or chipset from diagnostics: 0x11c11040
from Archives:
The HDA card softmodem chip is 0x11c11040
Support type needed or chipset: agrsm
Writing DOCs/Intel.txt
The AgereSystems/LSI agrsm code supports compiling of a agrmodem +
agrserial driver pair.
There are a few different chipsets which use this driver pair, but
they use different code resources:
Chipsets KV* PackageNames (most current as
of November 2009)
----------------------------------------------------------------------------------------------
11c11040 (on HDA audio cards) 2.6.31
agrsm-11c11040_20091225_i386.deb or
agrsm-11c11040-2.1.80~20091225.tar.bz2 !!
All available at: http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
Additionally there are;
automation & testing agrsm-tools_0.0.1_all.deb or
agrsm-tools-0.0.1-2.noarch.rpm
General background agrsm_howto.txt
------------------------------------------------------------------------------------------------
* KV == latest kernel release with a reported success
!! Latest update with major credit to Nikolay Zhuravlev
But see conflict issue:
http://linmodems.technion.ac.il/bigarch/archive-nineth/msg02753.html
For the 11c11040 chip with kernels 2.6.31 and later a change in a
modules loading settingmay be necessary.
Within the file /etc/modprobe.d/alsa-base.conf (or equivalent for
your Distro), change the phrase:
options snd-hda-intel power_save=10
to:
options snd-hda-intel power_save=0
or the agrsm drivers will not function. For Ubuntu related systems
this can be done with:
$ sudo gedit /etc/modprobe.d/alsa-base.conf
Report from Bjorn Wielens:
Please note- trying to load the modules on a OpenSuSE 11.2 system gives
an error about the module_version symbol. Using:
# modprobe --force agrmodem
# modprobe --force agrserial
is necessary to load the drivers, and does not appear to cause ill effects.
All of the above packages are dkms competent. This means that if
your Linux distros dkms package
is previously installed, if provides for future updates matching
forthcoming kernels.
-------------- end Agere Systems section -------------------
if you have further questions or encounter difficulties, please reply
back and we'll try our best to help you.
Regards,
Antonio
On 4/17/10, Antony <antony.sigma@xxxxxxxxx> wrote:
>
>
