Hi dear,
I am pasting the 'ModemData.txt' here under to get advice from you.
Also enclosing the same.
xoxoxoxoxoxioxoxoxoxoxoxoxoxoxoxioxoxoxoxoxoxoxoxoxoxioxoxoxoxo
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.15-26-386
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686, Ubuntu , ALSA_version=1.0.10
Linux version 2.6.15-26-386 (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Thu Aug 3 02:52:00 UTC 2006
scanModem update of: 2010_02_25
The modem symbolic link is /dev/modem -> ttyLTM0
Distrib_ID=Ubuntu
DistribCodeName=dapper
AptRepositoryStem=http://nz.archive.ubuntu.com/ubuntu/
Presently install your Linux Distributions dkms package. It provides for automated driver updates,
following upgrade of your kernel. For details see http://linux.dell.com/projects.shtml#dkms
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
ltmodem
Attached USB devices are:
ID 090c:1000 Feiya Technology Corp. Memory Bar
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is: http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx
Candidate PCI devices with modem chips are:
High Definition Audio cards can host modem chips.
For candidate card in slot 0000:01:07.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
0000:01:07.0 11c1:044c 11c1:044c Communication controller: Agere Systems LT WinModem
Modem interrupt assignment and sharing:
58: 3 IO-APIC-level ohci1394
--- Bootup diagnostics for card in PCI slot 0000:01:07.0 ----
[17179586.584000] ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 58
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 0000:01:07.0:
Modem chipset detected on
NAME="Communication controller: Agere Systems LT WinModem "
CLASS=0780
PCIDEV=11c1:044c
SUBSYS=11c1:044c
IRQ=58
IDENT=Agere.DSP
For candidate modem in: 0000:01:07.0
0780 Communication controller: Agere Systems LT WinModem
Primary device ID: 11c1:044c
Support type needed or chipset: Agere.DSP
The modem has a Lucent/Agere/LSI Mars or Apollo DSP (digital signal processing) chipset.
Support packages for 2.6.n kernels are at:
http://linmodems.technion.ac.il/packages/ltmodem/kernel-2.6/martian/
http://packages.debian.org/sid/martian-modem-source/
Always use the most update for kernels after 2.6.20, currently martian-full-20080625.tar.gz
For kernels 2.6.20 and less, usr martian-full-20080407.tar.gz.
See DOCs/AgereDSP.txt for Details.
At http://linmodems.technion.ac.il/packages/ltmodem/kernel-2.6/martian/ get the martian-full-20080625.tar.gz and follow Readme-NOW.html
0x044c -- Mars 3 Perseus data/fax only:North America and Global board
0x044c -- Mars 3.2 Mercury data fax only when no eeprom is present, North America DAA
-------------- end Agere Systems section -------------------
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
The kernel was compiled with gcc version 4.0.3 and a compiler is not installed
If compiling a modem driver proves to be necessary, one of the two procedures must be followed.
If not yet on the Internet, put the Dapper install CD in the drive
Open a terminal and therein:
$ sudo apt-get install gcc-4.0 make
Additionally the package linux-headers-2.6.15-26-386 must be downloaded.
Go to http://packages.ubuntu.com/ and search for linux-headers-2.6.15-26-386
After downloading, it can be installed with:
$ sudo dpkg -i linux-header*.deb
Or alternatively if online through Ethernet do:
$ sudo apt-get update
$ sudo apt-get install build-essential
will do all the necessary installations mentioned above.
In either installation case, set a symbolic link which will be expected later:
$ sudo ln -s /usr/bin/gcc-4.0 /usr/bin/gcc
After check with:
$ ls -l /usr/bin/gcc*
which should display:
lrwxrwxrwx 1 root root 16 2006-07-09 21:53 /usr/bin/gcc -> /usr/bin/gcc-4.0
-rwxr-xr-x 1 root root 93584 2006-04-20 18:22 /usr/bin/gcc-4.0
-rwxr-xr-x 1 root root 16245 2006-04-20 18:13 /usr/bin/gccbug-4.0
linux-headers-2.6.15-26-386 resources needed for compiling are not manifestly ready!
The code linking utility, ld, may be needed and is provided in the binutils package
If compiling is necessary packages must be installed, providing:
gcc-4.0 make linux-headers-2.6.15-26-386
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-- 1 root dip 257720 2006-07-06 01:00 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
auth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
For guidance on FAX usage, get from http://linmodems.technion.ac.il/packages/ get faxing.tar.gz
It has samples for a modem using port /dev/ttySL0, which must be changed to match your modem's port.
Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link: lrwxrwxrwx 1 root root 7 2010-03-13 10:04 /dev/modem -> ttyLTM0
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
/etc/udev/rules.d/60-symlinks.rules:# Create /dev/modem symlink
/etc/udev/rules.d/60-symlinks.rules:KERNEL=="ttyLTM[0-9]*", SYMLINK+="modem"
Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
xoxoxoxoxoxioxoxoxoxoxoxoxoxoxoxioxoxoxoxoxoxoxoxoxoxioxoxoxoxo
mohan
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.15-26-386
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686, Ubuntu , ALSA_version=1.0.10
Linux version 2.6.15-26-386 (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Thu Aug 3 02:52:00 UTC 2006
scanModem update of: 2010_02_25
The modem symbolic link is /dev/modem -> ttyLTM0
Distrib_ID=Ubuntu
DistribCodeName=dapper
AptRepositoryStem=http://nz.archive.ubuntu.com/ubuntu/
Presently install your Linux Distributions dkms package. It provides for automated driver updates,
following upgrade of your kernel. For details see http://linux.dell.com/projects.shtml#dkms
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
ltmodem
Attached USB devices are:
ID 090c:1000 Feiya Technology Corp. Memory Bar
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is: http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx
Candidate PCI devices with modem chips are:
High Definition Audio cards can host modem chips.
For candidate card in slot 0000:01:07.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
0000:01:07.0 11c1:044c 11c1:044c Communication controller: Agere Systems LT WinModem
Modem interrupt assignment and sharing:
58: 3 IO-APIC-level ohci1394
--- Bootup diagnostics for card in PCI slot 0000:01:07.0 ----
[17179586.584000] ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 58
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 0000:01:07.0:
Modem chipset detected on
NAME="Communication controller: Agere Systems LT WinModem "
CLASS=0780
PCIDEV=11c1:044c
SUBSYS=11c1:044c
IRQ=58
IDENT=Agere.DSP
For candidate modem in: 0000:01:07.0
0780 Communication controller: Agere Systems LT WinModem
Primary device ID: 11c1:044c
Support type needed or chipset: Agere.DSP
The modem has a Lucent/Agere/LSI Mars or Apollo DSP (digital signal processing) chipset.
Support packages for 2.6.n kernels are at:
http://linmodems.technion.ac.il/packages/ltmodem/kernel-2.6/martian/
http://packages.debian.org/sid/martian-modem-source/
Always use the most update for kernels after 2.6.20, currently martian-full-20080625.tar.gz
For kernels 2.6.20 and less, usr martian-full-20080407.tar.gz.
See DOCs/AgereDSP.txt for Details.
At http://linmodems.technion.ac.il/packages/ltmodem/kernel-2.6/martian/ get the martian-full-20080625.tar.gz and follow Readme-NOW.html
0x044c -- Mars 3 Perseus data/fax only:North America and Global board
0x044c -- Mars 3.2 Mercury data fax only when no eeprom is present, North America DAA
-------------- end Agere Systems section -------------------
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
The kernel was compiled with gcc version 4.0.3 and a compiler is not installed
If compiling a modem driver proves to be necessary, one of the two procedures must be followed.
If not yet on the Internet, put the Dapper install CD in the drive
Open a terminal and therein:
$ sudo apt-get install gcc-4.0 make
Additionally the package linux-headers-2.6.15-26-386 must be downloaded.
Go to http://packages.ubuntu.com/ and search for linux-headers-2.6.15-26-386
After downloading, it can be installed with:
$ sudo dpkg -i linux-header*.deb
Or alternatively if online through Ethernet do:
$ sudo apt-get update
$ sudo apt-get install build-essential
will do all the necessary installations mentioned above.
In either installation case, set a symbolic link which will be expected later:
$ sudo ln -s /usr/bin/gcc-4.0 /usr/bin/gcc
After check with:
$ ls -l /usr/bin/gcc*
which should display:
lrwxrwxrwx 1 root root 16 2006-07-09 21:53 /usr/bin/gcc -> /usr/bin/gcc-4.0
-rwxr-xr-x 1 root root 93584 2006-04-20 18:22 /usr/bin/gcc-4.0
-rwxr-xr-x 1 root root 16245 2006-04-20 18:13 /usr/bin/gccbug-4.0
linux-headers-2.6.15-26-386 resources needed for compiling are not manifestly ready!
The code linking utility, ld, may be needed and is provided in the binutils package
If compiling is necessary packages must be installed, providing:
gcc-4.0 make linux-headers-2.6.15-26-386
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-- 1 root dip 257720 2006-07-06 01:00 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
auth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
For guidance on FAX usage, get from http://linmodems.technion.ac.il/packages/ get faxing.tar.gz
It has samples for a modem using port /dev/ttySL0, which must be changed to match your modem's port.
Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link: lrwxrwxrwx 1 root root 7 2010-03-13 10:04 /dev/modem -> ttyLTM0
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
/etc/udev/rules.d/60-symlinks.rules:# Create /dev/modem symlink
/etc/udev/rules.d/60-symlinks.rules:KERNEL=="ttyLTM[0-9]*", SYMLINK+="modem"
Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
