I just took a look at the actual board. There are only 2 chips: Si3018-KS (16-pin, http://www.datasheetsite.com/datasheet/SI3018-KS) 0505CGCAAQ JA82537EP (64-pin) 0529DGEA30 INTEL '02 I guess the Si3018 and Si3052 chips are used in pairs in this application -- http://www.silabs.com/Marcom%20Documents/Resources/Si3052_PB.pdf. The Intel JA82537EP chip must contain all of the Si3052 functionality...? The Si3018 looks to just be the interface to the physical phone line while the Si3052 interfaces to the PCI bus. Cheers, -Chris On Mar 8, 2010, at 12:00 PM, Philippe Vouters wrote: > > Chris, > > After objdump'ing intel-536-537/coredrv/537core.lib on my Linux, it > ought to appear the code is all there ready to work correctly for your > board. The only matter which I am concerned with is if your PCI bus > fulfills the hardware limitation of the chip I mentioned in both my > mails to you AND my Intel-Readme. If you look carefully at your board, > it should contain such a component. > -- > sip:Vouters.Philippe@xxxxxxxxx > IM: philvout (Yahoo!) > http://vouters.dyndns.org/ > Philippe Vouters (Fontainebleau/France) > > > > -------- Message initial -------- > De: Chris Tracy <chris.t.tracy@xxxxxxxxx> > À: Bjorn Wielens <Uniacke1@xxxxxxxx> > Cc: Philippe Vouters <Philippe.Vouters@xxxxxxxxxxx>, Antonio Olivares > <olivares14031@xxxxxxxxx>, discuss@xxxxxxxxxxxxx, Marvin Stodolsky > <marvin.stodolsky@xxxxxxxxx> > Sujet: Re: Intel 537EP - driver loads but cannot use modem > Date: Mon, 8 Mar 2010 11:38:00 -0500 > > Bjorn, > > Good question -- the board in question that I am dealing with does indeed say "537EPG" on it, not "537EP". > > -Chris > > > On Mar 7, 2010, at 3:30 PM, Bjorn Wielens wrote: > >> I wonder if this is the same issue I ran in to last year when I picked >> up such a modem... >> Also identified as a 537, but the board itself was from a Dell system, >> and branded "537EPG". >> >> Chris, can you examine the back of your board? Does it say "537EP" or >> "537EPG"? >> >> If there are distinguishing marks, it will at least be easier to >> determine whether this is a hardware or a software limitation. >> >> Bjorn. >> >> >> On 03/07/2010 04:11 PM, Philippe Vouters wrote: >>> >>> Antonio, >>> >>>> From intel-536-537/makefile_537, PCIDEV=8086:1080 well corresponds to a >>> 537EP modem absolutely handled by the >>> http://vouters.dyndns.org/Intel/intel-536EP-537EP_2010_01_06.tar.bz2 >>> What brings an uncertainty between 536EP and 537SP is PCIDEV=8086:1040 >>> >>> Now Chris is facing a problem with his 537EP modem in modem_init (see >>> kernel stack trace). >>> >>> There is not much I can do to help as the code involved resides in >>> 537_core.lib which has always been Intel's proprietary code and shipped >>> in binary format. This is all the problem with Winmodems. >>> >>> Regards, >> > > > >
