Prof Socarres, If you were able to download the hsfmodem software package, please send it to Jennifer, as she likely will not be able to access http://www.linuxant.com/ Jennifer, Cary may help you in Spanish if necessary. The instructions below will serve, if you are not blocked access to http://www.linuxant.com/ MarvS scanModem maintainer From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php download hsfmodem-7.80.02.05full_k2.6.31_14_generic_ubuntu_i386.deb.zip Under Linux unpack with: $ unzip hsfmodem*.zip Then install with: $ sudo dpkg -i hsfmodem*.deb Subsequently, the modem should be found with $ sudo wvdialconf /etc/wvdial.conf Edit in your personal information with: $ sudo gedit /etc/wvdial.conf and try dialing out with: $ sudo wvdial. See DOCs/Testing.txt for details. The directions following below need only be pursued, if the above procedures are not adequate. Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find the hsfmodem package matching your System. For several Linux distros, there are precompiled drivers matched to specific kernels. These have within the FileName, your KernelVersion: 2.6.31_14_generic They can be found through http://www.linuxant.com/drivers/hsf/full/downloads.php A more precise location may be given a few paragraphs below. If an EXACT Match with your your KernelVersion is not found, one of the "Generic packages with source" near the bottom of the page must be used. Downloaded packages must be moved into the Linux partition (home folder is OK) and unzipped with: unzip hsf*.zip The installation command for a .deb suffic packages is, with root/adm permission: sudo dpkg -i hsf*.deb while for .rpm suffix it is, with: rpm -i hsf*.rpm Read DOCs/Conexant.txt Writing DOCs/Conexant.txt On Mon, Feb 22, 2010 at 7:07 PM, <jennifer@xxxxxxxxxxxxx> wrote: > -------------------------- System information ---------------------------- > CPU=i686, Ubuntu , ALSA_version=1.0.20 > Linux version 2.6.31-14-generic (buildd@rothera) (gcc version 4.4.1 > (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 > scanModem update of: 2010_02_16 > > Distrib_ID=Ubuntu > DistribCodeName=karmic > AptRepositoryStem=http://cu.archive.ubuntu.com/ubuntu/ > > Presently install your Linux Distributions dkms package. It provides for > automated driver updates, > following upgrade of your kernel. For details see > http://linux.dell.com/projects.shtml#dkms > > There are no blacklisted modem drivers in /etc/modprobe* files > > Potentially useful modem drivers now loaded are: > snd_intel8x0m snd_hda_intel > > Attached USB devices are: > ID 056e:000f Elecom Co., Ltd > ID 5986:0205 Acer, Inc > If a cellphone is not detected, see > http://ubuntuforums.org/archive/index.php/t-878554.html > A sample report is: > http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html > > If a USB modem or cellphone is attached and was not detected, please > provide available information in your request to discuss@xxxxxxxxxxxxx > > Candidate PCI devices with modem chips are: > 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio > Controller (rev 03) > High Definition Audio cards can host modem chips. > > For candidate card in slot 00:1b.0, firmware information and bootup > diagnostics are: > PCI slot PCI ID SubsystemID Name > ---------- --------- --------- -------------- > 00:1b.0 8086:293e 17aa:3a0d Audio device: Intel Corporation 82801I > > Modem interrupt assignment and sharing: > 22: 3096 9183 IO-APIC-fasteoi HDA Intel > --- Bootup diagnostics for card in PCI slot 00:1b.0 ---- > [ 0.216519] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf4a00000-0xf4a03fff] > [ 0.216587] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold > [ 0.216592] pci 0000:00:1b.0: PME# disabled > [ 8.537161] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 > [ 8.537183] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> > IRQ 22 > [ 8.537232] HDA Intel 0000:00:1b.0: setting latency timer to 64 > [ 8.692925] input: HDA Intel Mic as > /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 > [ 8.693031] input: HDA Intel Mic as > /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 > [ 8.693089] input: HDA Intel Headphone as > /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 > [ 2622.253080] HDA Intel 0000:00:1b.0: PCI INT A disabled > [ 2622.269081] HDA Intel 0000:00:1b.0: power state changed by ACPI to D3 > [ 2623.044346] HDA Intel 0000:00:1b.0: restoring config space at offset > 0xf (was 0x100, writing 0x10a) > [ 2623.044368] HDA Intel 0000:00:1b.0: restoring config space at offset > 0x3 (was 0x0, writing 0x10) > [ 2623.044375] HDA Intel 0000:00:1b.0: restoring config space at offset > 0x1 (was 0x100006, writing 0x100002) > [ 2623.409712] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> > IRQ 22 > [ 2623.409718] HDA Intel 0000:00:1b.0: setting latency timer to 64 > [19967.352360] HDA Intel 0000:00:1b.0: PCI INT A disabled > [19967.368090] HDA Intel 0000:00:1b.0: power state changed by ACPI to D3 > [19968.144346] HDA Intel 0000:00:1b.0: restoring config space at offset > 0xf (was 0x100, writing 0x10a) > [19968.144368] HDA Intel 0000:00:1b.0: restoring config space at offset > 0x3 (was 0x0, writing 0x10) > [19968.144374] HDA Intel 0000:00:1b.0: restoring config space at offset > 0x1 (was 0x100006, writing 0x100002) > [19968.510114] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> > IRQ 22 > [19968.510120] HDA Intel 0000:00:1b.0: setting latency timer to 64 > [22242.492090] HDA Intel 0000:00:1b.0: PCI INT A disabled > [22242.508090] HDA Intel 0000:00:1b.0: power state changed by ACPI to D3 > [22243.248346] HDA Intel 0000:00:1b.0: restoring config space at offset > 0xf (was 0x100, writing 0x10a) > [22243.248368] HDA Intel 0000:00:1b.0: restoring config space at offset > 0x3 (was 0x0, writing 0x10) > [22243.248375] HDA Intel 0000:00:1b.0: restoring config space at offset > 0x1 (was 0x100006, writing 0x100002) > [22243.591422] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> > IRQ 22 > [22243.591429] HDA Intel 0000:00:1b.0: setting latency timer to 64 > > The PCI slot 00:1b.0 of the modem card may be disabled early in > a bootup process, but then enabled later. If modem drivers load > but the modem is not responsive, read DOCs/Bootup.txt about possible fixes. > Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx > if help is needed. > > > > ===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== > The ALSA packages provide audio support and also drivers for some modems. > ALSA diagnostics are written during bootup to /proc/asound/ folders. > > The modem cards detected by "aplay -l" are: None > > > The /proc/asound/pcm file reports: > ----------------------- > 00-00: CONEXANT Analog : CONEXANT Analog : playback 1 : capture 1 > 00-01: Conexant Digital : Conexant Digital : playback 1 > 00-03: INTEL HDMI : INTEL HDMI : playback 1 > > about /proc/asound/cards: > ------------------------ > 0 [Intel ]: HDA-Intel - HDA Intel > HDA Intel at 0xf4a00000 irq 22 > > PCI slot 00:1b.0 has a High Definition Audio Card > The drivers are in the kernel modules tree at: > /lib/modules/2.6.31-14-generic/kernel/sound/pci/hda/snd-hda-intel.ko > > The HDA diagnostics did not recognize a modem chip on the audio subsystem, > though a Conexant chip modem might not be recognized. > > === Finished firmware and bootup diagnostics, next deducing cogent > software. === > > Predictive diagnostics for card in bus 00:1b.0: > Modem chipset detected on > NAME="Audio device: Intel Corporation 82801I " > CLASS=0403 > PCIDEV=8086:293e > SUBSYS=17aa:3a0d > IRQ=22 > HDA2=00:1b.0 > SOFT=8086:293e.HDA > IDENT=hsfmodem > Driver=hsfmodem-drivers > > For candidate modem in: 00:1b.0 > 0403 Audio device: Intel Corporation 82801I > Primary device ID: 8086:293e > Subsystem PCI_id 17aa:3a0d > Softmodem codec or chipset from diagnostics: > from Archives: > > > > Support type needed or chipset: hsfmodem > > > Writing DOCs/Intel.txt > > For owners of a Dell PCs with Conexant HSF modems, a driver source package > with full speed enabled is available, but requires driver compiling. Read > DOCs/Conexant.txt > > From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php > download hsfmodem-7.80.02.05full_k2.6.31_14_generic_ubuntu_i386.deb.zip > Under Linux unpack with: > $ unzip hsfmodem*.zip > Then install with: > $ sudo dpkg -i hsfmodem*.deb > Subsequently, the modem should be found with > $ sudo wvdialconf /etc/wvdial.conf > Edit in your personal information with: > $ sudo gedit /etc/wvdial.conf > and try dialing out with: > $ sudo wvdial. > See DOCs/Testing.txt for details. > > The directions following below need only be pursued, if the above > procedures are not adequate. > > Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find > the > hsfmodem package matching your System. For several Linux distros, there are > precompiled drivers matched to specific kernels. These have within the > FileName, > your KernelVersion: 2.6.31_14_generic > They can be found through > http://www.linuxant.com/drivers/hsf/full/downloads.php > A more precise location may be given a few paragraphs below. > If an EXACT Match with your your KernelVersion is not found, one of the > "Generic packages with source" near the bottom of the page must be used. > Downloaded packages must be moved into the Linux partition (home folder is > OK) > and unzipped with: > unzip hsf*.zip > The installation command for a .deb suffic packages is, with root/adm > permission: > sudo dpkg -i hsf*.deb > while for .rpm suffix it is, with: > rpm -i hsf*.rpm > Read DOCs/Conexant.txt > > Writing DOCs/Conexant.txt > > > Completed candidate modem analyses. > > The base of the UDEV device file system is: /dev/.udev > > Versions adequately match for the compiler installed: 4.4.1 > and the compiler used in kernel assembly: 4.4.1 > > The patch utility is needed for compiling ALSA drivers, and possibly others. > > > Minimal compiling resources appear complete: > make utility - /usr/bin/make > Compiler version 4.4 > linuc_headers base folder /lib/modules/2.6.31-14-generic/build > > However some compilations and executable functions may need additional > files, > in the FileNames.h (so called kernel "h"eaders) collection installed in > /usr/include/ . > For martian_modem, additional required packages are needed. The also > required headers of package libc6 are commonly installed by default. > Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev > packages, for kernels 2.6.24 and later versions. > In not included on your install CD, search for them at > http://packages.ubuntu.com > or comparable Repository for other Linux distros. > When compiling ALSA drivers, the utility "patch" will also be needed. > > > > > If a driver compilation fails, with message including some lack of some > FileName.h (stdio.h for example), then > Some additional kernel-header files need installation to /usr/include. The > minimal additional packages are libc6-dev > and any of its dependents, under Ubuntu linux-libc-dev > > If an alternate ethernet connection is available, > $ apt-get update > $ apt-get -s install linux-kernel-devel > will install needed packages. > For Debian/Ubuntu related distributions, run the following command to > display the needed package list: > > Otherwise packages have to be found through http://packages.ubuntu.com > Once downloaded and transferred into a Linux partition, > they can be installed alltogether with: > $ sudo dpkg -i *.deb > > > Checking pppd properties: > -rwsr-xr-- 1 root dip 277352 2009-02-20 12:25 /usr/sbin/pppd > > In case of an "error 17" "serial loopback" problem, see: > http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html > > To enable dialout without Root permission do: > $ su - root (not for Ubuntu) > sudo chmod a+x /usr/sbin/pppd > or under Ubuntu related Linuxes > sudo chmod a+x /usr/sbin/pppd > > Checking settings of: /etc/ppp/options > asyncmap 0 > noauth > crtscts > lock > hide-password > modem > proxyarp > lcp-echo-interval 30 > lcp-echo-failure 4 > noipx > > In case of a message like: > Warning: Could not modify /etc/ppp/pap-secrets: Permission denied > see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html > > For guidance on FAX usage, get from > http://linmodems.technion.ac.il/packages/ get faxing.tar.gz > It has samples for a modem using port /dev/ttySL0, which must be changed > to match your modem's port. > > Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 > Which can interfere with Browser naviagation. > > Don't worry about the following, it is for experts should trouble > shooting be necessary. > ========================================================== > > Checking for modem support lines: > -------------------------------------- > /device/modem symbolic link: > slmodemd created symbolic link /dev/ttySL0: > Within /etc/udev/ files: > > Within /etc/modprobe.conf files: > /etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2 > /etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2 > /etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to > blacklist unwanted modem drivers > /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem > /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem > Within any ancient /etc/devfs files: > > Within ancient kernel 2.4.n /etc/module.conf files: > > --------- end modem support lines -------- > > > > > > > > >
