Parliament Rizal, nepal kernel 2.6.31-14-generic

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



deAR sir,
       I AM HAVING THE SAME PROBLEM THAT WE ALL THE NEWBEIS OF UBUNTU
HAVE, I HAVE A MODEM FOR AN INTERNET CONNECTION AND THATS ALL.....with
ur documentation i tried a lot of possibilities but was
unsuccessful..............i am least triened in linux programming or
anything.....i am just familier with my windows but i want to sift to
linux now as i see no hope of windows
now......................so.....i want ur help to configure my
modem................plz help........replay soon.............
my modems information is given below


--------------------------  System information ----------------------------
CPU=i686,  Ubuntu ,  ALSA_version=1.0.20
Linux version 2.6.31-14-generic (buildd@rothera) (gcc version 4.4.1
(Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009
 scanModem update of:  2010_02_16

Distrib_ID=Ubuntu
DistribCodeName=karmic
AptRepositoryStem=http://np.archive.ubuntu.com/ubuntu/
The dialer utility package WVDIAL does not appear to be installed on
your System.
For Ubuntu users, there are at the bottom of
http://linmodems.technion.ac.il/packages/
packages with the files necessary to install wvdial, with names like:
     wvdial_jaunty_amd64.zip   for x86_64, 64 bit bus systems.
     wvdial_jaunty_i386.zip    for 32 bit systems.
     wvdial_karmic_i386.zip    for 32 bit systems.
These are about 1 MB in size.  After downloaded and copied into your
Linux partition:
$ unzip wv*.zip
Within the new folder:
$ sudo dpkg -i *.deb
will  complete the wvdial installation
Please read Modem/DOCs/wvdial.txt for usage information.

Presently install your Linux Distributions dkms package. It provides
for automated driver updates,
following upgrade of your kernel.  For details see
http://linux.dell.com/projects.shtml#dkms

 There are no blacklisted modem drivers in /etc/modprobe*  files

 Potentially useful modem drivers now loaded are:
       snd_hda_intel

Attached USB devices are:
 ID 1bcf:0007 Sunplus Innovation Technology Inc.
 ID 064e:a103 Suyin Corp.
 ID 147e:1000 Upek
If a cellphone is not detected, see
http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is:
http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html

If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx

Candidate PCI devices with modem chips are:
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio
Controller (rev 03)
High Definition Audio cards can host modem chips.

For candidate card in slot 00:1b.0, firmware information and bootup
diagnostics are:
 PCI slot	PCI ID		SubsystemID	Name
 ----------	---------	---------	--------------
 00:1b.0	8086:293e	1025:013b	Audio device: Intel Corporation 82801I

 Modem interrupt assignment and sharing:
 22:        623        569   IO-APIC-fasteoi   HDA Intel
 --- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[    0.511069] pci 0000:00:1b.0: reg 10 64bit mmio: [0x5cc00000-0x5cc03fff]
[    0.511120] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.511124] pci 0000:00:1b.0: PME# disabled
[   21.948154] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level,
low) -> IRQ 22
[   21.948193] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   22.084745] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input11

 The PCI slot 00:1b.0 of the modem card may be disabled early in
 a bootup process,  but then enabled later. If modem drivers load
 but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
 Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
 if help is needed.



===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.

The modem cards detected by "aplay -l"  are: None


The /proc/asound/pcm file reports:
-----------------------
00-00: ALC268 Analog : ALC268 Analog : playback 1 : capture 1
00-02: ALC268 Analog : ALC268 Analog : capture 1
00-03: INTEL HDMI : INTEL HDMI : playback 1

about /proc/asound/cards:
------------------------
 0 [Intel          ]: HDA-Intel - HDA Intel
                      HDA Intel at 0x5cc00000 irq 22

 PCI slot 00:1b.0 has a High Definition Audio Card
 The drivers are in the kernel modules tree at:
 /lib/modules/2.6.31-14-generic/kernel/sound/pci/hda/snd-hda-intel.ko
 The modem codec file for the HDA card is: /proc/asound/card0/codec#1
--------------------------------------------------------
Codec: Conexant ID 2c06
Address: 1
Function Id: 0x2
Vendor Id: 0x14f12c06
Subsystem Id: 0x1025013b
Revision Id: 0x100000
Modem Function Group: 0x2

 The audio card hosts a softmodem chip:  0x14f12c06

 14f1 is the Conexant Vendor ID, and 0x14f12c06 a softmodem chipset.
 Get a hsfmodem package through http://www.linuxant.com

If not a Conexant modem, the driver hsfmodem-drivers with its dependent drivers:

----------
provide audio + modem support with the modem chip residing on the subsystem.
Any particular card can host any one of several soft modem chips.

=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

Predictive  diagnostics for card in bus 00:1b.0:
	Modem chipset  detected on
NAME="Audio device: Intel Corporation 82801I "
CLASS=0403
PCIDEV=8086:293e
SUBSYS=1025:013b
IRQ=22
HDA2=00:1b.0
SOFT=8086:293e.HDA
CodecDiagnosed=Conexant_
HDAchipVendorID=14f1
CHIP=0x14f12c06
IDENT=hsfmodem
Driver=hsfmodem-drivers

 For candidate modem in:  00:1b.0
   0403 Audio device: Intel Corporation 82801I
      Primary device ID:  8086:293e
    Subsystem PCI_id  1025:013b
    Softmodem codec or chipset from diagnostics: Conexant_0x14f12c06
                               from    Archives:
                        The HDA card softmodem chip is 0x14f12c06


Support type needed or chipset:	hsfmodem


Writing DOCs/Intel.txt

For owners of a Dell PCs with Conexant HSF modems, a driver source
package with full speed enabled is available, but requires driver
compiling. Read DOCs/Conexant.txt

 From  http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
 download hsfmodem-7.80.02.05full_k2.6.31_14_generic_ubuntu_i386.deb.zip
 Under Linux unpack with:
 $ unzip hsfmodem*.zip
 Then install with:
 $ sudo dpkg -i hsfmodem*.deb
 Subsequently, the modem should be found with
 $ sudo wvdialconf /etc/wvdial.conf
 Edit in your personal information with:
 $ sudo gedit /etc/wvdial.conf
 and try dialing out with:
 $ sudo wvdial.
 See DOCs/Testing.txt  for details.

 The directions following below need only be pursued, if the above
procedures are not adequate.

Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find the
hsfmodem package matching your System. For several Linux distros, there are
precompiled drivers matched to specific kernels. These have within the FileName,
your KernelVersion:	2.6.31_14_generic
They can be found through
http://www.linuxant.com/drivers/hsf/full/downloads.php
A more precise location may be given a few paragraphs below.
If an EXACT Match with your your KernelVersion is not found, one of the
"Generic packages with source" near the bottom of the page must be used.
Downloaded packages must be moved into the Linux partition (home folder is OK)
and unzipped with:
	unzip hsf*.zip
The installation command for a .deb suffic packages is, with root/adm
permission:
  sudo dpkg -i hsf*.deb
while for .rpm suffix it is, with:
  rpm -i hsf*.rpm
 Read DOCs/Conexant.txt

Writing DOCs/Conexant.txt


 Completed candidate modem analyses.

 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.4.1
             and the compiler used in kernel assembly: 4.4.1

 The patch utility is needed for compiling ALSA drivers, and possibly others.


 Minimal compiling resources appear complete:
   make utility - /usr/bin/make
   Compiler version 4.4
   linuc_headers base folder /lib/modules/2.6.31-14-generic/build

 However some compilations and executable functions may need additional files,
 in the FileNames.h (so called kernel "h"eaders) collection installed
in  /usr/include/ .
 For martian_modem, additional required packages are needed. The also
required headers of package libc6 are commonly installed by default.
 Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev
packages, for kernels 2.6.24 and later versions.
 In not included on your install CD, search for them at
http://packages.ubuntu.com
 or comparable Repository for other Linux distros.
 When compiling ALSA drivers, the utility "patch" will also be needed.




If a driver compilation fails, with message including some lack of
some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include.
The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to
display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb


Checking pppd properties:
	-rwsr-xr-- 1 root dip 277352 2009-02-20 23:10 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
    http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
	$ su - root  (not for Ubuntu)
        sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
	sudo chmod a+x /usr/sbin/pppd

Checking settings of:	/etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

For guidance on FAX usage, get from
http://linmodems.technion.ac.il/packages/  get faxing.tar.gz
It has samples for a modem using port /dev/ttySL0, which must be
changed to match your modem's port.

Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
wlan0 wmaster0
Which can interfere with Browser naviagation.

 Don't worry about the following, it is for experts should trouble
shooting be necessary.
==========================================================

 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
     Within /etc/udev/ files:

     Within /etc/modprobe.conf files:
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in
order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------

[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux