Juan Good progress. The problem is now one of logon protocol RE: --> Carrier detected. Starting PPP immediately. Please make sure that Stupid Mode = on is not active. It can be inactivated by preceding it with a #, as in: # Stupid Mode = on Starting PPP immediately. indicates that logon and password on not being sent, so --> The PPP daemon has died: Authentication error. --> We failed to authenticate ourselves to the peer. MarvS On Wed, Feb 10, 2010 at 11:20 PM, islanis <islanis@xxxxxxxxxxxxxx> wrote: > hey marv look at this i a changed my ISP number to another number but the > same ISP and i got this > > > almost but nothing > > > root@juan-desktop:/home/juan# wvdial > --> WvDial: Internet dialer version 1.60 > --> Cannot get information for serial port. > --> Initializing modem. > --> Sending: ATZ > ATZ > OK > --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > OK > --> Modem initialized. > --> Sending: ATDT060110 > --> Waiting for carrier. > ATDT060110 > CONNECT 50667 > --> Carrier detected. Starting PPP immediately. > --> Starting pppd at Wed Feb 10 20:06:18 2010 > --> Pid of pppd: 3425 > --> Using interface ppp0 > --> pppd: ??C[08]@?C[08][18]?C[08] > --> pppd: ??C[08]@?C[08][18]?C[08] > --> pppd: ??C[08]@?C[08][18]?C[08] > --> pppd: ??C[08]@?C[08][18]?C[08] > --> pppd: ??C[08]@?C[08][18]?C[08] > --> Disconnecting at Wed Feb 10 20:06:21 2010 > --> The PPP daemon has died: Authentication error. > --> We failed to authenticate ourselves to the peer. > --> Maybe bad account or password? (exit code = 19) > --> man pppd explains pppd error codes in more detail. > --> I guess that's it for now, exiting > --> The PPP daemon has died. (exit code = 19) > > ----- Original Message ----- > From: "Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx> > To: "Juan Alejandro Martinez Linares" <islanis@xxxxxxxxxxxxxx> > Cc: <discuss@xxxxxxxxxxxxx> > Sent: Thursday, February 11, 2010 2:35 PM > Subject: Re: help motorola sm56 is not conecting > > > Many (but not all) modem users are having this problem of the specification > Carrier Check = no > seems to be ignored. > > Today I should be able to get home through some 20 miles of Washington > area snow drifts, after 3 days stuck at a convention center, which is > usually only a 30 minute drive away. > > At home I will compile a variant of wvdial, > with default changed to > Carrier Check = no > Then those of you having problem can test it. > > MarvS > > On Thu, Feb 11, 2010 at 8:26 AM, Juan Alejandro Martinez Linares > <islanis@xxxxxxxxxxxxxx> wrote: >> one thing ,,i have omited one thing,, it dial only the 4 first numbers of >> the telephone >> number of my provider,, i heard it always the only 4 numbers ,, IE 8314 of >> 8314949, >> >> >> >> Mensaje citado por Antonio Olivares <olivares14031@xxxxxxxxx>: >> >>> Juan, >>> >>> If you have a telephone, can you verify that the line is not busy? It >>> might be ISP problem here? >>> >>> Si levantas el telefono, suena ocupado? Si no es probablemente un >>> problema con la red y tu provedor de Internet? >>> >>> Regards/Saludos, >>> >>> >>> Antonio >>> >>> On 2/10/10, Juan Alejandro Martinez Linares <islanis@xxxxxxxxxxxxxx> >>> wrote: >>> > >>> > >>> > i did this >>> > >>> > >>> > >>> > Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90 >>> > Stupid Mode = on >>> > Auto DNS = off >>> > to >>> > Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +MS=34 >>> > # Stupid Mode = on >>> > Idle Seconds = 12 >>> > Auto DNS = on >>> > >>> > >>> > and it sais this >>> > >>> > >>> > >>> > root@juan-desktop:/home/juan# wvdial infomed3 >>> > --> WvDial: Internet dialer version 1.60 >>> > --> Cannot get information for serial port. >>> > --> Initializing modem. >>> > --> Sending: ATZ >>> > ATZ >>> > OK >>> > --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +MS=34 >>> > ATQ0 V1 E1 S0=0 &C1 &D2 +MS=34 >>> > OK >>> > --> Modem initialized. >>> > --> Idle Seconds = 12, disabling automatic reconnect. >>> > --> Sending: ATDT8314949 >>> > --> Waiting for carrier. >>> > ATDT8314949 >>> > BUSY >>> > --> The line is busy. Trying again. >>> > --> Sending: ATDT8314949 >>> > --> Waiting for carrier. >>> > ATDT8314949 >>> > BUSY >>> > >>> > >>> > what else >>> > >>> > ------------------------------ >>> > Infomed - Red de Salud de Cuba >>> > http://www.sld.cu/ >>> > >>> > >>> > -- >>> > >>> > Este mensaje le ha llegado mediante el servicio de correo electronico >>> > que >>> > ofrece Infomed para respaldar el cumplimiento de las misiones del >>> > Sistema >>> > Nacional de Salud. La persona que envia este correo asume el compromiso >>> > de >>> > usar el servicio a tales fines y cumplir con las regulaciones >>> > establecidas >>> > >>> > Infomed: http://www.sld.cu/ >>> > >>> >> >> >> >> >> ------------------------------ >> Infomed - Red de Salud de Cuba >> http://www.sld.cu/ >> >> >> -- >> >> Este mensaje le ha llegado mediante el servicio de correo electronico que >> ofrece Infomed para respaldar el cumplimiento de las misiones del Sistema >> Nacional de Salud. La persona que envia este correo asume el compromiso de >> usar el servicio a tales fines y cumplir con las regulaciones establecidas >> >> Infomed: http://www.sld.cu/ >> > > __________ Informacin de ESET Smart Security, versin de la base de firmas de > virus 4804 (20100125) __________ > > ESET Smart Security ha comprobado este mensaje. > > http://www.eset.com > > > > > > __________ Información de ESET Smart Security, versión de la base de firmas de virus 4804 (20100125) __________ > > ESET Smart Security ha comprobado este mensaje. > > http://www.eset.com > > > > > > -- > > Este mensaje le ha llegado mediante el servicio de correo electronico que ofrece Infomed para respaldar el cumplimiento de las misiones del Sistema Nacional de Salud. La persona que envia este correo asume el compromiso de usar el servicio a tales fines y cumplir con las regulaciones establecidas > > Infomed: http://www.sld.cu/ >
