Rami,
scanModem recommends that you get/try 11c11040 modem drivers:
Predictive diagnostics for card in bus 00:1b.0:
Modem chipset detected on
NAME="Audio device: Intel Corporation 82801I "
CLASS=0403
PCIDEV=8086:293e
SUBSYS=1043:19b3
IRQ=22
CHIP=0x11c11040
IDENT=11c11040
Driver=agrmodem+agrserial+patched_snd-hda-intel
For candidate modem in: 00:1b.0
0403 Audio device: Intel Corporation 82801I
Primary device ID: 8086:293e
Support type needed or chipset: 11c11040
----------------end Softmodem section --------------
Writing DOCs/Intel.txt
Vendor 11c1 is Lucent Technologies with modem technology now under LSI Inc.
Their Linux code developer/maintainer is Soumyendu Sarkar. Support
for a chipset and its
continued maintenance is only initiated at the request of a major
chipset buyer,
or comparable sponsor. Several different modem chipset types are produced:
with varying support under Linux.
Device ID Support Name Comment
--------- ------------- ----------- -----------------------------
0480 serial_drivers Venus controller chipset 1673JV7
0440-045d martian Mars/Apollo DSP (digital signal
processing) chipsets
0462 none 56K.V90/ADSL Wildwire
048d none SV2P soft modem
048(c or f) AGRSM SV2P soft modem
0600 none soft modem, very few in the field.
0620 AGRSM Pinball soft modem, in some HP desktop PCs
011c11040 AGRSM hosted on High Definition Audio cards
062(1-3) none SV92PP,Pinball soft modem, in some HP desktop PCs
martian - At http://linmodems.technion.ac.il/packages/ltmodem/kernel-2.6/martian/
AGRSM - At http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
Compiling resources for a driver module pair: agrmodem.ko + agrserial.ko
Use the agrsm-HDA-20080721-ALSA15.tar.bz2 or agrsm-HDA-20080721.tar.bz2
Read the agrsm_howto.txt. For 11c11040 chips, also the
HOWTO-Agere-11c11040-HDA.html
-------------- end Agere Systems section -------------------
Since you used older scanModem:
scanModem update of: 2008_08_26
you got other instructions which may not apply here, if you get newer
scanModem you should get better instructions to follow. If you try
this out, rerun scanModem and send us the new ModemData.txt
Regards,
Antonio
On 2/11/10, Rami Akkad <ram_87_1@xxxxxxxxx> wrote:
> hello...
> I hope you help me to find solution for my Modem
> thank You...
>
>
>
