Ezekiel, The previously recommended software is correct for modem chip Codec: LSI ID 1040 Address: 1 Function Id: 0x2 Vendor Id: 0x11c11040 ------------------------ though a more detailed diagnostic will be necessary to determine which of the two HD Audio card subsystems it resides on. MarvS On Fri, Jan 22, 2010 at 3:37 AM, Ezekiel Krahlin <ezekielk@xxxxxxxx> wrote: > Thank you Marvin, for the new scanModem script. Here are the ModemData.txt > results: > > -------------------------- System information ---------------------------- > CPU=i686, Linux Mint 8 Helena - Main Edition > Linux version 2.6.31-14-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu > 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 > scanModem update of: 2010_01_22 > > > The dkms driver upgrade utilities are installed, > > There are no blacklisted modem drivers in /etc/modprobe* files > > Potentially useful modem drivers now loaded are: > snd_hda_intel > > Attached USB devices are: > ID 0bda:0158 Realtek Semiconductor Corp. Mass Stroage Device > ID 04d9:0420 Holtek Semiconductor, Inc. > ID 1241:1603 Belkin > ID 0416:5518 Winbond Electronics Corp. 4-Port Hub > ID 064e:a103 Suyin Corp. > ID 04fc:0c25 Sunplus Technology Co., Ltd > If a cellphone is not detected, see > http://ubuntuforums.org/archive/index.php/t-878554.html > A sample report is: > http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html > > If a USB modem or cellphone is attached and was not detected, please > provide available information in your request to discuss@xxxxxxxxxxxxx > > For candidate card in slot 00:14.2, firmware information and bootup > diagnostics are: > PCI slot PCI ID SubsystemID Name > ---------- --------- --------- -------------- > 00:14.2 1002:4383 1025:0166 Audio device: ATI > Technologies Inc SBx00 Azalia > > Modem interrupt assignment and sharing: > 16: 225 147475 IO-APIC-fasteoi ohci_hcd:usb3, ohci_hcd:usb4, > HDA Intel > --- Bootup diagnostics for card in PCI slot 00:14.2 ---- > [ 1.151882] pci 0000:00:14.2: reg 10 64bit mmio: [0xf0000000-0xf0003fff] > [ 1.151935] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold > [ 1.151940] pci 0000:00:14.2: PME# disabled > [ 12.901046] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> > IRQ 16 > [ 13.243366] input: HDA Digital PCBeep as > /devices/pci0000:00/0000:00:14.2/input/input12 > > The PCI slot 00:14.2 of the modem card may be disabled early in > a bootup process, but then enabled later. If modem drivers load > but the modem is not responsive, read DOCs/Bootup.txt about possible > fixes. > Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx > if help is needed. > > > For candidate card in slot 01:05.1, firmware information and bootup > diagnostics are: > PCI slot PCI ID SubsystemID Name > ---------- --------- --------- -------------- > 01:05.1 1002:960f 1002:9612 Audio device: ATI > Technologies Inc RS780 Azalia controller > > Modem interrupt assignment and sharing: > 19: 113 33846 IO-APIC-fasteoi ehci_hcd:usb2, ath, HDA Intel > --- Bootup diagnostics for card in PCI slot 01:05.1 ---- > [ 1.152380] pci 0000:01:05.1: reg 10 32bit mmio: [0xcfdec000-0xcfdeffff] > [ 1.152412] pci 0000:01:05.1: supports D1 D2 > [ 13.287953] HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> > IRQ 19 > [ 13.287985] HDA Intel 0000:01:05.1: setting latency timer to 64 > > > ===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== > The ALSA packages provide audio support and also drivers for some modems. > ALSA diagnostics are written during bootup to /proc/asound/ folders. > > The ALSA verion is 1.0.20 > The modem cards detected by "aplay -l" are: None > > > The /proc/asound/pcm file reports: > ----------------------- > 00-00: ALC888 Analog : ALC888 Analog : playback 1 : capture 1 > 00-01: ALC888 Digital : ALC888 Digital : playback 1 > 00-02: ALC888 Analog : ALC888 Analog : capture 1 > 01-03: ATI HDMI : ATI HDMI : playback 1 > > about /proc/asound/cards: > ------------------------ > 0 [SB ]: HDA-Intel - HDA ATI SB > HDA ATI SB at 0xf0000000 irq 16 > 1 [HDMI ]: HDA-Intel - HDA ATI HDMI > HDA ATI HDMI at 0xcfdec000 irq 19 > > PCI slot 00:14.2 > 01:05.1 has a High Definition Audio Card > The drivers are in the kernel modules tree at: > /lib/modules/2.6.31-14-generic/kernel/sound/pci/hda/snd-hda-intel.ko > New HDA card type: > > > > The modem codec file for the HDA card is: /proc/asound/card0/codec#1 > -------------------------------------------------------- > Codec: LSI ID 1040 > Address: 1 > Function Id: 0x2 > Vendor Id: 0x11c11040 > Subsystem Id: 0x10250166 > Revision Id: 0x100200 > Modem Function Group: 0x1 > > The audio card hosts a softmodem chip: 0x11c11040 > If not a Conexant modem, the driver agrsm with its dependent drivers: > > ---------- > provide audio + modem support with the modem chip residing on the subsystem. > Any particular card can host any one of several soft modem chips. > > === Finished firmware and bootup diagnostics, next deducing cogent software. > === > > Predictive diagnostics for card in bus 00:14.2: > Modem chipset detected on > NAME="Audio device: ATI Technologies Inc SBx00 Azalia " > CLASS=0403 > PCIDEV=1002:4383 > SUBSYS=1025:0166 > IRQ=16 > HDA=1002:4383 > SOFT=1002:4383.HDA > HDAchipVendorID=11c1 > CHIP=0x11c11040 > IDENT=agrsm > Driver=agrsm > > For candidate modem in: 00:14.2 > 0403 Audio device: ATI Technologies Inc SBx00 Azalia > Primary device ID: 1002:4383 > Subsystem PCI_id 1025:0166 > Softmodem codec or chipset from diagnostics: 0x11c11040 > from Archives: > The HDA card softmodem chip is 0x11c11040 > > > Support type needed or chipset: agrsm > > > The AgereSystems/LSI agrsm code supports compiling of a agrmodem + agrserial > driver pair. > There are a few different chipsets which use this driver pair, but they use > different code resources: > Chipsets KV* PackageNames (most current as of > November 2009) > ---------------------------------------------------------------------------------------------- > 11c1:048c and 11c1:048f 2.6.29 agrsm048pci-2.1.60_20100108_i386.deb > or agrsm048pci-2.1.60_20100108.tar.gz > 11c1:0620 2.6.31 agrsm06pci-2.1.80_20100106_i386.deb > or agrsm06pci-2.1.80~20100106.tar.gz !! > 11c11040 (on HDA audio cards) 2.6.31 > agrsm-11c11040-2.1.80~20091225.tar.bz2 !! > All available at: > http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ , whereat > additionally > automation & testing agrsm-tools_0.0.1_all.deb or > agrsm-tools-0.0.1-2.noarch.rpm > General background agrsm_howto.txt > for rpm variants of dkms-agrsm , see > http://linux.zsolttech.com/linmodem/agrsm/ > ------------------------------------------------------------------------------------------------ > * KV == latest kernel release with a reported success > !! Latest update with major credit to Nikolay Zhuravlev > But see conflict issue: > http://linmodems.technion.ac.il/bigarch/archive-nineth/msg02753.html > Report from Bjorn Wielens: > Please note- trying to load the modules on a OpenSuSE 11.2 system gives > an error about the module_version symbol. Using: > # modprobe --force agrmodem > # modprobe --force agrserial > is necessary to load the drivers, and does not appear to cause ill effects. > > > All of the above packages are dkms competent. This means that if your Linux > distros dkms package > is previously installed, if provides for future updates matching forthcoming > kernels. > > -------------- end Agere Systems section ------------------- > > > Predictive diagnostics for card in bus 01:05.1: > Modem chipset not detected on > NAME="Audio device: ATI Technologies Inc RS780 Azalia controller" > CLASS=0403 > PCIDEV=1002:960f > SUBSYS=1002:9612 > IRQ=19 > > For candidate modem in: 01:05.1 > 0403 Audio device: ATI Technologies Inc RS780 Azalia controller > Primary device ID: 1002:960f > Support type needed or chipset: > > > > scanModem could not identify the Support Type needed from diagnosics or > archives. > If an alternative boot into Microsoft windows can be done, do mouse > clicks on: > Start > Settings > Control Panel > Classical View (for Window XP) > System >> >> Hardware > Device Manager > Modems > Click on the + > Modem. Double click >> to > > expand the graphic. Manufacturer information may be displayed. For example, > CXT > stands for Conexant. Click the Diagnostics Tab. Record any hardware ID or > vendor > and device information. > Next do the Query Modem and record the ATI specifications displayed such as: > ATI3 - Agere SoftModem Version 2.1.22 > ATI5 - 2.1.22, AMR Intel MB, AC97 ID:SIL REV:0x27 > Try to identify the modem setup file, with name perhaps MODEM.INF. > If may contain chipset Vendor informaton. > > > The AgereSystems/LSI agrsm code supports compiling of a agrmodem + agrserial > driver pair. > There are a few different chipsets which use this driver pair, but they use > different code resources: > Chipsets KV* PackageNames (most current as of > November 2009) > ---------------------------------------------------------------------------------------------- > 11c1:048c and 11c1:048f 2.6.29 agrsm048pci-2.1.60_20100108_i386.deb > or agrsm048pci-2.1.60_20100108.tar.gz > 11c1:0620 2.6.31 agrsm06pci-2.1.80_20100106_i386.deb > or agrsm06pci-2.1.80~20100106.tar.gz !! > 11c11040 (on HDA audio cards) 2.6.31 > agrsm-11c11040-2.1.80~20091225.tar.bz2 !! > All available at: > http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ , whereat > additionally > automation & testing agrsm-tools_0.0.1_all.deb or > agrsm-tools-0.0.1-2.noarch.rpm > General background agrsm_howto.txt > for rpm variants of dkms-agrsm , see > http://linux.zsolttech.com/linmodem/agrsm/ > ------------------------------------------------------------------------------------------------ > * KV == latest kernel release with a reported success > !! Latest update with major credit to Nikolay Zhuravlev > But see conflict issue: > http://linmodems.technion.ac.il/bigarch/archive-nineth/msg02753.html > Report from Bjorn Wielens: > Please note- trying to load the modules on a OpenSuSE 11.2 system gives > an error about the module_version symbol. Using: > # modprobe --force agrmodem > # modprobe --force agrserial > is necessary to load the drivers, and does not appear to cause ill effects. > > > All of the above packages are dkms competent. This means that if your Linux > distros dkms package > is previously installed, if provides for future updates matching forthcoming > kernels. > > -------------- end Agere Systems section ------------------- > > Completed candidate modem analyses. > > The base of the UDEV device file system is: /dev/.udev > > Versions adequately match for the compiler installed: 4.4.1 > and the compiler used in kernel assembly: 4.4.1 > > > > Minimal compiling resources appear complete: > make utility - /usr/bin/make > Compiler version 4.4 > linuc_headers base folder /lib/modules/2.6.31-14-generic/build > > However some compilations and executable functions may need additional > files, > in the FileNames.h (so called kernel "h"eaders) collection installed in > /usr/include/ . > For martian_modem, additional required packages are needed. The also > required headers of package libc6 are commonly installed by default. > Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev > packages, for kernels 2.6.24 and later versions. > In not included on your install CD, search for them at > http://packages.ubuntu.com > or comparable Repository for other Linux distros. > When compiling ALSA drivers, the utility "patch" will also be needed. > > > > For Debian and some related distributions, a package kernel-kbuild-2.6-31 > may be needed to support driver compiling. > > > If a driver compilation fails, with message including some lack of some > FileName.h (stdio.h for example), then > Some additional kernel-header files need installation to /usr/include. The > minimal additional packages are libc6-dev > and any of its dependents, under Ubuntu linux-libc-dev > > If an alternate ethernet connection is available, > $ apt-get update > $ apt-get -s install linux-kernel-devel > will install needed packages. > For Debian/Ubuntu related distributions, run the following command to > display the needed package list: > > Otherwise packages have to be found through http://packages.ubuntu.com > Once downloaded and transferred into a Linux partition, > they can be installed alltogether with: > $ sudo dpkg -i *.deb > > > Checking pppd properties: > -rwxr-xr-x 1 zeke dip 277352 2009-02-20 09:25 /usr/sbin/pppd > > In case of an "error 17" "serial loopback" problem, see: > http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html > > To enable dialout without Root permission do: > $ su - root (not for Ubuntu) > chmod a+x /usr/sbin/pppd > or under Ubuntu related Linuxes > chmod a+x /usr/sbin/pppd > > Checking settings of: /etc/ppp/options > asyncmap 0 > noauth > crtscts > lock > hide-password > modem > proxyarp > lcp-echo-interval 30 > lcp-echo-failure 4 > noipx > > In case of a message like: > Warning: Could not modify /etc/ppp/pap-secrets: Permission denied > see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html > > For guidance on FAX usage, get from > http://linmodems.technion.ac.il/packages/ get faxing.tar.gz > It has samples for a modem using port /dev/ttySL0, which must be changed to > match your modem's port. > > Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 wlan0 > wmaster0 > Which can interfere with Browser naviagation. > > Don't worry about the following, it is for experts should trouble shooting > be necessary. > ========================================================== > > Checking for modem support lines: > -------------------------------------- > /device/modem symbolic link: > slmodemd created symbolic link /dev/ttySL0: > Within /etc/udev/ files: > > Within /etc/modprobe.conf files: > /etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to > blacklist unwanted modem drivers > /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem > /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem > /etc/modprobe.d/agrsm.conf:## setup agrsm modem with only: "sudo modprobe > agrserial" > /etc/modprobe.d/agrsm.conf:install agrserial /sbin/modprobe --ignore-install > agrmodem ; /sbin/modprobe --ignore-install agrserial && \ > /etc/modprobe.d/agrsm.conf:remove agrserial /sbin/modprobe -r > --ignore-remove agrserial ; /sbin/modprobe -r --ignore-remove agrmodem && { > if test -L /dev/ttySAGR; then rm /dev/ttySAGR; fi } ; true > /etc/modprobe.d/agrsm.conf:# to automate bootup "sudo modprobe agrmodem" > /etc/modprobe.d/agrsm.conf:## to setup agrsm modem with only: "sudo modprobe > agrmodem" > /etc/modprobe.d/agrsm.conf:# install agrmodem /sbin/modprobe > --ignore-install agrmodem && \ > /etc/modprobe.d/agrsm.conf:## of effects of agrmodem and agrserial loading > /etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2 > /etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2 > Within any ancient /etc/devfs files: > > Within ancient kernel 2.4.n /etc/module.conf files: > > --------- end modem support lines -------- > > > ---------------------------------------------------------------- > This message was sent using IMP, the Internet Messaging Program. > >
