Srinath,
your modem is supported through 11c11040 drivers :
Predictive diagnostics for card in bus 00:1b.0:
Modem chipset detected on
NAME="Audio device: Intel Corporation 82801G "
CLASS=0403
PCIDEV=8086:27d8
SUBSYS=10cf:1397
IRQ=17
HDA=8086:27d8
SOFT=8086:27d8.HDA
HDAchipVendorID=11c1
CHIP=0x11c11040
IDENT=agrsm
Driver=agrsm
For candidate modem in: 00:1b.0
0403 Audio device: Intel Corporation 82801G
Primary device ID: 8086:27d8
Subsystem PCI_id 10cf:1397
Softmodem codec or chipset from diagnostics: 0x11c11040
from Archives:
The HDA card softmodem chip is 0x11c11040
Support type needed or chipset: agrsm
Writing DOCs/Intel.txt
The AgereSystems/LSI agrsm code supports compiling of a agrmodem +
agrserial driver pair.
There are a few different chipsets which use this driver pair, but
they use different code resources:
Chipsets KV* PackageNames (most current as of November 2009)
----------------------------------------------------------------------------------------------
11c1:048c and 11c1:048f
2.6.29 agrsm048pci-2.1.60_20100108_i386.deb or
agrsm048pci-2.1.60_20100108.tar.gz
11c1:0620 2.6.31
agrsm06pci-2.1.80_20100106_i386.deb or
agrsm06pci-2.1.80~20100106.tar.gz !!
11c11040 (on HDA audio cards) 2.6.31
agrsm-11c11040-2.1.80~20091225.tar.bz2 !!
All available at:
http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ , whereat
additionally
automation & testing agrsm-tools_0.0.1_all.deb or
agrsm-tools-0.0.1-2.noarch.rpm
General background agrsm_howto.txt
for rpm variants of dkms-agrsm , see http://linux.zsolttech.com/linmodem/agrsm/
------------------------------------------------------------------------------------------------
* KV == latest kernel release with a reported success
!! Latest update with major credit to Nikolay Zhuravlev
But see conflict issue:
http://linmodems.technion.ac.il/bigarch/archive-nineth/msg02753.html
Report from Bjorn Wielens:
Please note- trying to load the modules on a OpenSuSE 11.2 system gives
an error about the module_version symbol. Using:
# modprobe --force agrmodem
# modprobe --force agrserial
is necessary to load the drivers, and does not appear to cause ill effects.
All of the above packages are dkms competent. This means that if your
Linux distros dkms package
is previously installed, if provides for future updates matching
forthcoming kernels.
But it will be a task to get it working with your kernel 2.6.26-2-686,
you would need to read the file:
http://linmodems.technion.ac.il/packages/ltmodem/11c11040/agrsm_howto.txt
It(scanModem) reports that wvdial is not installed also:
e dialer utility package WVDIAL does not appear to be installed on your System.
For Ubuntu users, there are at the bottom of
http://linmodems.technion.ac.il/packages/
packages with the files necessary to install wvdial, with names like:
wvdial_jaunty_amd64.zip for x86_64, 64 bit bus systems.
wvdial_jaunty_i386.zip for 32 bit systems.
wvdial_karmic_i386.zip for 32 bit systems.
These are about 1 MB in size. After downloaded and copied into your
Linux partition:
$ unzip wv*.zip
Within the new folder:
$ sudo dpkg -i *.deb
will complete the wvdial installation
Please read Modem/DOCs/wvdial.txt for usage information.
You would need 11c11040 drivers, but recommendations will be to
install Ubuntu to make it easier? Otherwise the agrsm howto explains
how to work it out.
Regards,
Antonio
On 1/15/10, Srinath Madhavan <msrinath80@xxxxxxxxx> wrote:
> Hi,
>
> I own a Fujitsu Lifebook S7110 notebook. I wish to use the modem in this
> laptop. I have attached the ModemData.txt file to this message. Can someone
> guide me with the installation?
>
> Thanks & Best Regards,
> Srinath Madhavan
>
> Free as in Freedom. May the source be with you!
>
>
>
