Motorola SM56 Speakerphone Modem not detected
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.31-16-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686,
Linux version 2.6.31-16-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #53-Ubuntu SMP Tue Dec 8 04:01:29 UTC 2009
scanModem update of: 2009_12_10
The dialer utility package WVDIAL does not appear to be installed on your System.
For Ubuntu users, there are at the bottom of http://linmodems.technion.ac.il/packages/
packages with the files necessary to install wvdial, with names like:
wvdial_jaunty_amd64.zip for x86_64, 64 bit bus systems.
wvdial_jaunty_i386.zip for 32 bit systems.
wvdial_karmic_i386.zip for 32 bit systems.
These are about 1 MB in size. After downloaded and copied into your Linux partition:
$ unzip wv*.zip
Within the new folder:
$ sudo dpkg -i *.deb
will complete the wvdial installation
Please read Modem/DOCs/wvdial.txt for usage information.
The dkms driver upgrade utilities are installed,
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
snd_hda_intel
Attached USB devices are:
ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor
ID 04f2:b023 Chicony Electronics Co., Ltd Gateway USB 2.0 Webcam
ID 045e:00e1 Microsoft Corp. Wireless Laser Mouse 6000 Reciever
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is: http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx
For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1b.0 8086:284b 103c:30cc Audio device: Intel Corporation 82801H
Modem interrupt assignment and sharing:
30: 4011 0 PCI-MSI-edge HDA Intel
--- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[ 0.202028] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf8400000-0xf8403fff]
[ 0.202096] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.202101] pci 0000:00:1b.0: PME# disabled
[ 27.145349] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 27.145412] HDA Intel 0000:00:1b.0: irq 30 for MSI/MSI-X
[ 27.145447] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 27.280980] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
The PCI slot 00:1b.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.
The ALSA verion is 1.0.21
The modem cards detected by "aplay -l" are:
tarjeta 0: Intel [HDA Intel], dispositivo 6: Si3054 Modem [Si3054 Modem]
The /proc/asound/pcm file reports:
-----------------------
00-00: ALC268 Analog : ALC268 Analog : playback 1 : capture 1
00-01: ALC268 Digital : ALC268 Digital : playback 1
00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1
about /proc/asound/cards:
------------------------
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xf8400000 irq 30
PCI slot 00:1b.0 has a High Definition Audio Card
The drivers are in the kernel modules tree at:
/lib/modules/2.6.31-16-generic/kernel/sound/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.31-16-generic/updates/alsa/snd-hda-intel.ko
/lib/modules/2.6.31-14-generic/kernel/sound/pci/hda/snd-hda-intel.ko
The modem codec file for the HDA card is: /proc/asound/card0/codec#1
--------------------------------------------------------
Codec: Motorola Si3054
Address: 1
Function Id: 0x2
Vendor Id: 0x10573055
Subsystem Id: 0x10573055
Revision Id: 0x100700
Modem Function Group: 0x1
The audio card hosts a softmodem chip: 0x10573055
The softmodem chip 0x10573055 is in principle supported by the COMM support of slmodemd
and the joint snd-hda-intel audio+modem driver, begun with ALSA version 1.0.13.
For HDA cards with ALC883 chips, an upgrade to ALSA verions 1.0.15 way be necessary. Instructions for Upgrading snd-hda-intel and its dependent driver set are at:
http://linmodems.technion.ac.il/bigarch/archive-eighth/msg00838.html
If not a Conexant modem, the driver snd-hda-intel with its dependent drivers:
snd_hda_intel 26560 4
snd_hda_codec 78300 3 snd_hda_codec_si3054,snd_hda_codec_realtek,snd_hda_intel
snd_pcm 74976 5 snd_hda_codec_si3054,snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd 60900 22 snd_hda_codec_si3054,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
snd_page_alloc 9060 2 snd_hda_intel,snd_pcm
----------
provide audio + modem support with the modem chip residing on the subsystem.
Any particular card can host any one of several soft modem chips.
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 00:1b.0:
Modem chipset detected on
NAME="Audio device: Intel Corporation 82801H "
CLASS=0403
PCIDEV=8086:284b
SUBSYS=103c:30cc
IRQ=30
HDA=8086:284b
SOFT=8086:284b.HDA
HDAchipVendorID=1057
CHIP=0x10573055
IDENT=slmodemd
SLMODEMD_DEVICE=hw:0,6
Driver=snd-hda-intel
For candidate modem in: 00:1b.0
0403 Audio device: Intel Corporation 82801H
Primary device ID: 8086:284b
Subsystem PCI_id 103c:30cc
Softmodem codec or chipset from diagnostics: 0x10573055
from Archives:
The HDA card softmodem chip is 0x10573055
Support type needed or chipset: slmodemd supporting the snd-hda-intel audio+modem driver
An ALSA (Advanced Linux Sound Architecture) modem driver: snd-hda-intel
provides Low Level support enabling contact with the modem hardware.
For all BUT Conexant chip soft modems (using hsfmodem software)
complementary High Level support is through a Smartlink utility: slmodemd
Download from http://linmodems.technion.ac.il/packages/smartlink/
the package SLMODEMD.gcc4.4.tar.gz having a compiled slmodemd. Unpack under Linux with:
$ tar zxf SLMODEMD.gcc4.4.tar.gz
and read instructions therein. But briefly, the modem is setup with command:
sudo slmodemd -c YOUR_COUNTRY --alsa hw:0,6
reporting dynamic creation of ports:
/dev/ttySL0 --> /dev/pts/N , with N some number
Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through guidance.
Writing DOCs/Intel.txt
Writing DOCs/Smartlink.txt
============ end Smartlink section =====================
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.4.1
and the compiler used in kernel assembly: 4.4.1
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.4
linuc_headers base folder /lib/modules/2.6.31-16-generic/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-- 1 root dip 277352 2009-02-20 18:25 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 wlan0 wmaster0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
CPU0 CPU1
0: 82984 0 IO-APIC-edge timer
1: 227 0 IO-APIC-edge i8042
8: 1 0 IO-APIC-edge rtc0
9: 1237 0 IO-APIC-fasteoi acpi
12: 1048 0 IO-APIC-edge i8042
14: 7319 0 IO-APIC-edge ata_piix
15: 0 0 IO-APIC-edge ata_piix
16: 663 0 IO-APIC-fasteoi uhci_hcd:usb3, nvidia
18: 2 0 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb7
19: 23 0 IO-APIC-fasteoi uhci_hcd:usb6
20: 3 0 IO-APIC-fasteoi ohci1394
21: 7918 0 IO-APIC-fasteoi uhci_hcd:usb4, mmc0
23: 22 0 IO-APIC-fasteoi ehci_hcd:usb2, uhci_hcd:usb5
28: 10000 0 PCI-MSI-edge ahci
29: 0 0 PCI-MSI-edge eth0
30: 4011 0 PCI-MSI-edge HDA Intel
31: 17733 0 PCI-MSI-edge iwl3945
NMI: 0 0 Non-maskable interrupts
LOC: 12446 45051 Local timer interrupts
SPU: 0 0 Spurious interrupts
CNT: 0 0 Performance counter interrupts
PND: 0 0 Performance pending work
RES: 17256 20061 Rescheduling interrupts
CAL: 2734 7177 Function call interrupts
TLB: 74 30 TLB shootdowns
TRM: 0 0 Thermal event interrupts
THR: 0 0 Threshold APIC interrupts
MCE: 0 0 Machine check exceptions
MCP: 3 3 Machine check polls
ERR: 0
MIS: 0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-16-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #53-Ubuntu SMP Tue Dec 8 04:01:29 UTC 2009 (Ubuntu 2.6.31-16.53-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fed0000 (usable)
[ 0.000000] BIOS-e820: 000000007fed0000 - 000000007fee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fee3000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x7fed0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D7FFF write-protect
[ 0.000000] D8000-DBFFF uncachable
[ 0.000000] DC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable)
[ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007fed0000 (usable)
[ 0.000000] modified: 000000007fed0000 - 000000007fee3000 (ACPI NVS)
[ 0.000000] modified: 000000007fee3000 - 0000000080000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[ 0.000000] RAMDISK: 378a4000 - 37fefc01
[ 0.000000] Allocated new RAMDISK: 008ad000 - 00ff8c01
[ 0.000000] Move RAMDISK from 00000000378a4000 - 0000000037fefc00 to 008ad000 - 00ff8c00
[ 0.000000] ACPI: RSDP 000f8480 00024 (v02 HP )
[ 0.000000] ACPI: XSDT 7fed5b59 0007C (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 7fedfc6c 000F4 (v03 HP 30CC 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT 7fed703c 08BBC (v01 HP 30CB 06040000 INTL 20061109)
[ 0.000000] ACPI: FACS 7fee2fc0 00040
[ 0.000000] ACPI: HPET 7fedfd60 00038 (v01 HP 30CB 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 7fedfd98 0003C (v01 HP 30CB 06040000 LOHR 0000005A)
[ 0.000000] ACPI: TMOR 7fedfdd4 00026 (v01 HP 30CC 06040000 PTL 00000003)
[ 0.000000] ACPI: APIC 7fedfdfa 00068 (v01 HP 30CB 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 7fedfe62 00028 (v01 HP 30CB 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC 7fedfe8a 00176 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001)
[ 0.000000] ACPI: SSDT 7fed6d5f 002DD (v01 HP 30CB 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 7fed6161 0025F (v01 HP 30CB 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 7fed60bb 000A6 (v01 HP 30CB 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 7fed5bd5 004E6 (v01 HP 30CB 00003000 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1158MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00008000 - 0000ef00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0]
[ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #5 [00008a9000 - 00008ac150] BRK ==> [00008a9000 - 00008ac150]
[ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #7 [00008ad000 - 0000ff8c01] NEW RAMDISK ==> [00008ad000 - 0000ff8c01]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] found SMP MP-table at [c00f8520] f8520
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007fed0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007fed0
[ 0.000000] On node 0 totalpages: 523883
[ 0.000000] free_area_init_node: node 0, pgdat c0784940, node_mem_map c1000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2318 pages used for memmap
[ 0.000000] HighMem zone: 294340 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages at c200a000, static data 35612 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519789
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-16-generic root=UUID=ebd5c4b1-c0b8-4eea-830e-d7867b01ae52 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 10479680 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007fed0)
[ 0.000000] Memory: 2051700k/2095936k available (4566k kernel code, 42924k reserved, 2142k data, 540k init, 1186632k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB)
[ 0.000000] .data : 0xc0575bb4 - 0xc078d3c8 (2142 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0575bb4 (4566 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:424
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1994.890 MHz processor.
[ 0.002322] Console: colour VGA+ 80x25
[ 0.002325] console [tty0] enabled
[ 0.002485] hpet clockevent registered
[ 0.002488] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.002494] Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.78 BogoMIPS (lpj=7979560)
[ 0.002512] Security Framework initialized
[ 0.002532] AppArmor: AppArmor initialized
[ 0.002538] Mount-cache hash table entries: 512
[ 0.002658] Initializing cgroup subsys ns
[ 0.002662] Initializing cgroup subsys cpuacct
[ 0.002666] Initializing cgroup subsys memory
[ 0.002673] Initializing cgroup subsys freezer
[ 0.002675] Initializing cgroup subsys net_cls
[ 0.002688] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.002690] CPU: L2 cache: 4096K
[ 0.002693] CPU: Physical Processor ID: 0
[ 0.002694] CPU: Processor Core ID: 0
[ 0.002698] mce: CPU supports 6 MCE banks
[ 0.002705] CPU0: Thermal monitoring enabled (TM2)
[ 0.002708] using mwait in idle threads.
[ 0.002715] Performance Counters: Core2 events, Intel PMU driver.
[ 0.002723] ... version: 2
[ 0.002724] ... bit width: 40
[ 0.002726] ... generic counters: 2
[ 0.002728] ... value mask: 000000ffffffffff
[ 0.002729] ... max period: 000000007fffffff
[ 0.002731] ... fixed-purpose counters: 3
[ 0.002732] ... counter mask: 0000000700000003
[ 0.002736] Checking 'hlt' instruction... OK.
[ 0.018359] ACPI: Core revision 20090521
[ 0.032328] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.072018] CPU0: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a
[ 0.076001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 3989.97 BogoMIPS (lpj=7979943)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 4096K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] mce: CPU supports 6 MCE banks
[ 0.004000] CPU1: Thermal monitoring enabled (TM2)
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.161641] CPU1: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a
[ 0.161656] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.164021] Brought up 2 CPUs
[ 0.164024] Total of 2 processors activated (7979.75 BogoMIPS).
[ 0.164073] CPU0 attaching sched-domain:
[ 0.164076] domain 0: span 0-1 level MC
[ 0.164079] groups: 0 1
[ 0.164084] CPU1 attaching sched-domain:
[ 0.164086] domain 0: span 0-1 level MC
[ 0.164089] groups: 1 0
[ 0.164165] Booting paravirtualized kernel on bare hardware
[ 0.164208] regulator: core version 0.5
[ 0.164208] Time: 8:16:50 Date: 12/23/09
[ 0.164208] NET: Registered protocol family 16
[ 0.164212] EISA bus registered
[ 0.164222] ACPI: bus type pci registered
[ 0.164289] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.164292] PCI: MCFG area at e0000000 reserved in E820
[ 0.164294] PCI: Using MMCONFIG for extended config space
[ 0.164296] PCI: Using configuration type 1 for base access
[ 0.165323] bio: create slab <bio-0> at 0
[ 0.168652] ACPI: EC: Enabling special treatment for EC from MSI.
[ 0.168654] ACPI: EC: Look up EC in DSDT
[ 0.171838] ACPI: BIOS _OSI(Linux) query ignored
[ 0.173058] ACPI: Interpreter enabled
[ 0.173066] ACPI: (supports S0 S3 S4 S5)
[ 0.173086] ACPI: Using IOAPIC for interrupt routing
[ 0.174714] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.200599] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.200602] ACPI: EC: driver started in interrupt mode
[ 0.200962] ACPI: No dock devices found.
[ 0.201535] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.201650] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.201654] pci 0000:00:01.0: PME# disabled
[ 0.201744] pci 0000:00:1a.0: reg 20 io port: [0x1800-0x181f]
[ 0.201819] pci 0000:00:1a.1: reg 20 io port: [0x1820-0x183f]
[ 0.201899] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf8404800-0xf8404bff]
[ 0.201963] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.201968] pci 0000:00:1a.7: PME# disabled
[ 0.202028] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf8400000-0xf8403fff]
[ 0.202096] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.202101] pci 0000:00:1b.0: PME# disabled
[ 0.202197] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.202202] pci 0000:00:1c.0: PME# disabled
[ 0.202295] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.202300] pci 0000:00:1c.1: PME# disabled
[ 0.202401] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.202406] pci 0000:00:1c.5: PME# disabled
[ 0.202473] pci 0000:00:1d.0: reg 20 io port: [0x1840-0x185f]
[ 0.202550] pci 0000:00:1d.1: reg 20 io port: [0x1860-0x187f]
[ 0.202619] pci 0000:00:1d.2: reg 20 io port: [0x1880-0x189f]
[ 0.202696] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf8404c00-0xf8404fff]
[ 0.202766] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.202772] pci 0000:00:1d.7: PME# disabled
[ 0.202937] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.202942] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[ 0.202950] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0380 (mask 0007)
[ 0.203004] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.203013] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.203022] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.203030] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.203039] pci 0000:00:1f.1: reg 20 io port: [0x18a0-0x18af]
[ 0.203120] pci 0000:00:1f.2: reg 10 io port: [0x18d8-0x18df]
[ 0.203128] pci 0000:00:1f.2: reg 14 io port: [0x18cc-0x18cf]
[ 0.203136] pci 0000:00:1f.2: reg 18 io port: [0x18d0-0x18d7]
[ 0.203145] pci 0000:00:1f.2: reg 1c io port: [0x18c8-0x18cb]
[ 0.203154] pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff]
[ 0.203163] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf8404000-0xf84047ff]
[ 0.203211] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.203216] pci 0000:00:1f.2: PME# disabled
[ 0.203251] pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff]
[ 0.203279] pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f]
[ 0.203363] pci 0000:01:00.0: reg 10 32bit mmio: [0xce000000-0xceffffff]
[ 0.203381] pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.203398] pci 0000:01:00.0: reg 1c 64bit mmio: [0xcc000000-0xcdffffff]
[ 0.203409] pci 0000:01:00.0: reg 24 io port: [0x2000-0x207f]
[ 0.203419] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.204091] pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
[ 0.204095] pci 0000:00:01.0: bridge 32bit mmio: [0xcc000000-0xceffffff]
[ 0.204100] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.204284] pci 0000:02:00.0: reg 10 32bit mmio: [0xf4000000-0xf4000fff]
[ 0.204521] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.204533] pci 0000:02:00.0: PME# disabled
[ 0.204649] pci 0000:00:1c.0: bridge io port: [0x4000-0x7fff]
[ 0.204654] pci 0000:00:1c.0: bridge 32bit mmio: [0xf4000000-0xf5ffffff]
[ 0.204663] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf0000000-0xf1ffffff]
[ 0.204727] pci 0000:00:1c.1: bridge io port: [0x8000-0xbfff]
[ 0.204732] pci 0000:00:1c.1: bridge 32bit mmio: [0xf6000000-0xf7ffffff]
[ 0.204741] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xf2000000-0xf3ffffff]
[ 0.204818] pci 0000:08:00.0: reg 10 io port: [0xc000-0xc0ff]
[ 0.204847] pci 0000:08:00.0: reg 18 64bit mmio: [0xf8000000-0xf8000fff]
[ 0.204876] pci 0000:08:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.204941] pci 0000:08:00.0: supports D1 D2
[ 0.204943] pci 0000:08:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.204950] pci 0000:08:00.0: PME# disabled
[ 0.205026] pci 0000:00:1c.5: bridge io port: [0xc000-0xcfff]
[ 0.205031] pci 0000:00:1c.5: bridge 32bit mmio: [0xf8000000-0xf80fffff]
[ 0.205099] pci 0000:09:09.0: reg 10 32bit mmio: [0xf8100000-0xf81007ff]
[ 0.205162] pci 0000:09:09.0: supports D1 D2
[ 0.205164] pci 0000:09:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.205170] pci 0000:09:09.0: PME# disabled
[ 0.205214] pci 0000:09:09.1: reg 10 32bit mmio: [0xf8100800-0xf81008ff]
[ 0.205277] pci 0000:09:09.1: supports D1 D2
[ 0.205279] pci 0000:09:09.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.205284] pci 0000:09:09.1: PME# disabled
[ 0.205329] pci 0000:09:09.2: reg 10 32bit mmio: [0xf8100c00-0xf8100cff]
[ 0.205392] pci 0000:09:09.2: supports D1 D2
[ 0.205394] pci 0000:09:09.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.205399] pci 0000:09:09.2: PME# disabled
[ 0.205442] pci 0000:09:09.3: reg 10 32bit mmio: [0xf8101000-0xf81010ff]
[ 0.205505] pci 0000:09:09.3: supports D1 D2
[ 0.205507] pci 0000:09:09.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.205513] pci 0000:09:09.3: PME# disabled
[ 0.205557] pci 0000:09:09.4: reg 10 32bit mmio: [0xf8101400-0xf81014ff]
[ 0.205620] pci 0000:09:09.4: supports D1 D2
[ 0.205622] pci 0000:09:09.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.205627] pci 0000:09:09.4: PME# disabled
[ 0.205680] pci 0000:00:1e.0: transparent bridge
[ 0.205688] pci 0000:00:1e.0: bridge 32bit mmio: [0xf8100000-0xf81fffff]
[ 0.205726] pci_bus 0000:00: on NUMA node 0
[ 0.205731] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.205945] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 0.206036] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.206118] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.206194] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 0.206297] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.214692] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.214797] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.214901] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 0.215003] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.215105] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.215207] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.215309] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.215411] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.215585] SCSI subsystem initialized
[ 0.215604] libata version 3.00 loaded.
[ 0.215604] usbcore: registered new interface driver usbfs
[ 0.215604] usbcore: registered new interface driver hub
[ 0.215604] usbcore: registered new device driver usb
[ 0.215604] ACPI: WMI: Mapper loaded
[ 0.215604] PCI: Using ACPI for IRQ routing
[ 0.228010] Bluetooth: Core ver 2.15
[ 0.228023] NET: Registered protocol family 31
[ 0.228023] Bluetooth: HCI device and connection manager initialized
[ 0.228023] Bluetooth: HCI socket layer initialized
[ 0.228023] NetLabel: Initializing
[ 0.228023] NetLabel: domain hash size = 128
[ 0.228023] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.228033] NetLabel: unlabeled traffic allowed by default
[ 0.228062] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.228067] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.244009] pnp: PnP ACPI init
[ 0.244019] ACPI: bus type pnp registered
[ 0.250301] pnp: PnP ACPI: found 11 devices
[ 0.250303] ACPI: ACPI bus type pnp unregistered
[ 0.250307] PnPBIOS: Disabled by ACPI PNP
[ 0.250316] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.250319] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.250322] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.250326] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.250329] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.250332] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.250335] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
[ 0.250338] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.250345] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.250351] system 00:06: ioport range 0x380-0x383 has been reserved
[ 0.250354] system 00:06: ioport range 0x680-0x69f has been reserved
[ 0.250357] system 00:06: ioport range 0x800-0x80f has been reserved
[ 0.250360] system 00:06: ioport range 0x1000-0x107f has been reserved
[ 0.250363] system 00:06: ioport range 0x1180-0x11bf has been reserved
[ 0.250365] system 00:06: ioport range 0x1640-0x164f has been reserved
[ 0.250369] system 00:06: ioport range 0xfe00-0xfe00 has been reserved
[ 0.250374] system 00:07: ioport range 0x6a0-0x6af has been reserved
[ 0.250377] system 00:07: ioport range 0x6b0-0x6ff has been reserved
[ 0.285034] AppArmor: AppArmor Filesystem Enabled
[ 0.285108] pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff]
[ 0.285111] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.285114] pci 0000:00:01.0: IO window: 0x2000-0x2fff
[ 0.285119] pci 0000:00:01.0: MEM window: 0xcc000000-0xceffffff
[ 0.285123] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.285128] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.285132] pci 0000:00:1c.0: IO window: 0x4000-0x7fff
[ 0.285138] pci 0000:00:1c.0: MEM window: 0xf4000000-0xf5ffffff
[ 0.285142] pci 0000:00:1c.0: PREFETCH window: 0x000000f0000000-0x000000f1ffffff
[ 0.285150] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04
[ 0.285154] pci 0000:00:1c.1: IO window: 0x8000-0xbfff
[ 0.285160] pci 0000:00:1c.1: MEM window: 0xf6000000-0xf7ffffff
[ 0.285165] pci 0000:00:1c.1: PREFETCH window: 0x000000f2000000-0x000000f3ffffff
[ 0.285174] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:08
[ 0.285178] pci 0000:00:1c.5: IO window: 0xc000-0xcfff
[ 0.285185] pci 0000:00:1c.5: MEM window: 0xf8000000-0xf80fffff
[ 0.285190] pci 0000:00:1c.5: PREFETCH window: 0x80000000-0x800fffff
[ 0.285195] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09
[ 0.285197] pci 0000:00:1e.0: IO window: disabled
[ 0.285204] pci 0000:00:1e.0: MEM window: 0xf8100000-0xf81fffff
[ 0.285209] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.285219] alloc irq_desc for 16 on node -1
[ 0.285221] alloc kstat_irqs on node -1
[ 0.285226] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.285230] pci 0000:00:01.0: setting latency timer to 64
[ 0.285238] alloc irq_desc for 17 on node -1
[ 0.285240] alloc kstat_irqs on node -1
[ 0.285243] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.285248] pci 0000:00:1c.0: setting latency timer to 64
[ 0.285257] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.285262] pci 0000:00:1c.1: setting latency timer to 64
[ 0.285271] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.285276] pci 0000:00:1c.5: setting latency timer to 64
[ 0.285284] pci 0000:00:1e.0: setting latency timer to 64
[ 0.285288] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.285291] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.285294] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff]
[ 0.285296] pci_bus 0000:01: resource 1 mem: [0xcc000000-0xceffffff]
[ 0.285299] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.285301] pci_bus 0000:02: resource 0 io: [0x4000-0x7fff]
[ 0.285304] pci_bus 0000:02: resource 1 mem: [0xf4000000-0xf5ffffff]
[ 0.285307] pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf1ffffff]
[ 0.285309] pci_bus 0000:04: resource 0 io: [0x8000-0xbfff]
[ 0.285312] pci_bus 0000:04: resource 1 mem: [0xf6000000-0xf7ffffff]
[ 0.285314] pci_bus 0000:04: resource 2 pref mem [0xf2000000-0xf3ffffff]
[ 0.285317] pci_bus 0000:08: resource 0 io: [0xc000-0xcfff]
[ 0.285319] pci_bus 0000:08: resource 1 mem: [0xf8000000-0xf80fffff]
[ 0.285322] pci_bus 0000:08: resource 2 pref mem [0x80000000-0x800fffff]
[ 0.285324] pci_bus 0000:09: resource 1 mem: [0xf8100000-0xf81fffff]
[ 0.285327] pci_bus 0000:09: resource 3 io: [0x00-0xffff]
[ 0.285329] pci_bus 0000:09: resource 4 mem: [0x000000-0xffffffff]
[ 0.285359] NET: Registered protocol family 2
[ 0.285448] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.285751] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.286106] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.286291] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.286293] TCP reno registered
[ 0.286357] NET: Registered protocol family 1
[ 0.286415] Trying to unpack rootfs image as initramfs...
[ 0.474252] Freeing initrd memory: 7471k freed
[ 0.478429] Simple Boot Flag at 0x35 set to 0x1
[ 0.478617] cpufreq-nforce2: No nForce2 chipset.
[ 0.478645] Scanning for low memory corruption every 60 seconds
[ 0.478755] audit: initializing netlink socket (disabled)
[ 0.478772] type=2000 audit(1261556210.476:1): initialized
[ 0.487369] highmem bounce pool size: 64 pages
[ 0.487375] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.488860] VFS: Disk quotas dquot_6.5.2
[ 0.488920] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.489461] fuse init (API version 7.12)
[ 0.489544] msgmni has been set to 1705
[ 0.489756] alg: No test for stdrng (krng)
[ 0.489771] io scheduler noop registered
[ 0.489773] io scheduler anticipatory registered
[ 0.489775] io scheduler deadline registered
[ 0.489817] io scheduler cfq registered (default)
[ 0.489979] pci 0000:01:00.0: Boot video device
[ 0.490116] alloc irq_desc for 24 on node -1
[ 0.490118] alloc kstat_irqs on node -1
[ 0.490128] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.490135] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 0.490273] alloc irq_desc for 25 on node -1
[ 0.490275] alloc kstat_irqs on node -1
[ 0.490285] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.490296] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.490459] alloc irq_desc for 26 on node -1
[ 0.490466] alloc kstat_irqs on node -1
[ 0.490475] pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
[ 0.490487] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 0.490653] alloc irq_desc for 27 on node -1
[ 0.490655] alloc kstat_irqs on node -1
[ 0.490664] pcieport-driver 0000:00:1c.5: irq 27 for MSI/MSI-X
[ 0.490676] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[ 0.490787] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.490923] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.494237] ACPI: AC Adapter [ACAD] (on-line)
[ 0.494316] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.494320] ACPI: Power Button [PWRF]
[ 0.494369] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.494376] ACPI: Power Button [PWRB]
[ 0.494418] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 0.494421] ACPI: Sleep Button [SLPB]
[ 0.494468] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 0.497558] ACPI: Lid Switch [LID]
[ 0.498218] ACPI: SSDT 7fed6a1d 0027A (v01 HP 30CB 00003000 INTL 20061109)
[ 0.498762] ACPI: SSDT 7fed63c0 005D8 (v01 HP 30CB 00003001 INTL 20061109)
[ 0.501160] Monitor-Mwait will be used to enter C-1 state
[ 0.501188] Monitor-Mwait will be used to enter C-2 state
[ 0.501211] Monitor-Mwait will be used to enter C-3 state
[ 0.501219] Marking TSC unstable due to TSC halts in idle
[ 0.501247] Switched to high resolution mode on CPU 0
[ 0.501262] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 0.501287] processor LNXCPU:00: registered as cooling_device0
[ 0.501291] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.501647] ACPI: SSDT 7fed6c97 000C8 (v01 HP 30CB 00003000 INTL 20061109)
[ 0.501691] Switched to high resolution mode on CPU 1
[ 0.502015] ACPI: SSDT 7fed6998 00085 (v01 HP 30CB 00003000 INTL 20061109)
[ 0.502974] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 0.503001] processor LNXCPU:01: registered as cooling_device1
[ 0.503005] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 0.512581] ACPI Exception: AE_OK, No or invalid critical threshold 20090521 thermal-384
[ 0.512649] isapnp: Scanning for PnP cards...
[ 0.678253] ACPI: Battery Slot [BAT0] (battery present)
[ 0.867188] isapnp: No Plug & Play device found
[ 0.868339] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.869666] brd: module loaded
[ 0.870112] loop: module loaded
[ 0.870178] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 0.870249] ahci 0000:00:1f.2: version 3.0
[ 0.870263] alloc irq_desc for 19 on node -1
[ 0.870265] alloc kstat_irqs on node -1
[ 0.870271] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.870305] alloc irq_desc for 28 on node -1
[ 0.870307] alloc kstat_irqs on node -1
[ 0.870317] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
[ 0.870387] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[ 0.870390] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
[ 0.870396] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.870626] scsi0 : ahci
[ 0.870709] scsi1 : ahci
[ 0.870773] scsi2 : ahci
[ 0.870879] ata1: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404100 irq 28
[ 0.870883] ata2: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404180 irq 28
[ 0.870887] ata3: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404200 irq 28
[ 0.870935] ata_piix 0000:00:1f.1: version 2.13
[ 0.870945] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.870981] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.871052] scsi3 : ata_piix
[ 0.871109] scsi4 : ata_piix
[ 0.871684] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
[ 0.871687] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
[ 0.872618] Fixed MDIO Bus: probed
[ 0.872651] PPP generic driver version 2.4.2
[ 0.872734] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.872753] alloc irq_desc for 18 on node -1
[ 0.872755] alloc kstat_irqs on node -1
[ 0.872759] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.872770] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.872773] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.872821] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.876742] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.876750] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.876763] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8404800
[ 0.892014] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.892093] usb usb1: configuration #1 chosen from 1 choice
[ 0.892122] hub 1-0:1.0: USB hub found
[ 0.892130] hub 1-0:1.0: 4 ports detected
[ 0.892186] alloc irq_desc for 23 on node -1
[ 0.892188] alloc kstat_irqs on node -1
[ 0.892192] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.892201] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.892205] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.892235] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.896152] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.896159] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.896173] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8404c00
[ 0.912019] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.912090] usb usb2: configuration #1 chosen from 1 choice
[ 0.912117] hub 2-0:1.0: USB hub found
[ 0.912123] hub 2-0:1.0: 6 ports detected
[ 0.912187] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.912204] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.912224] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.912231] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.912234] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.912263] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.912299] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[ 0.912379] usb usb3: configuration #1 chosen from 1 choice
[ 0.912404] hub 3-0:1.0: USB hub found
[ 0.912410] hub 3-0:1.0: 2 ports detected
[ 0.912461] alloc irq_desc for 21 on node -1
[ 0.912463] alloc kstat_irqs on node -1
[ 0.912467] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.912474] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.912478] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.912506] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.912543] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
[ 0.912621] usb usb4: configuration #1 chosen from 1 choice
[ 0.912647] hub 4-0:1.0: USB hub found
[ 0.912653] hub 4-0:1.0: 2 ports detected
[ 0.912705] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.912712] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.912715] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.912743] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.912771] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
[ 0.912846] usb usb5: configuration #1 chosen from 1 choice
[ 0.912874] hub 5-0:1.0: USB hub found
[ 0.912880] hub 5-0:1.0: 2 ports detected
[ 0.912928] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.912936] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.912939] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.912972] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.913007] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
[ 0.913086] usb usb6: configuration #1 chosen from 1 choice
[ 0.913113] hub 6-0:1.0: USB hub found
[ 0.913119] hub 6-0:1.0: 2 ports detected
[ 0.913165] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.913172] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.913175] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.913205] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.913234] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
[ 0.913318] usb usb7: configuration #1 chosen from 1 choice
[ 0.913343] hub 7-0:1.0: USB hub found
[ 0.913349] hub 7-0:1.0: 2 ports detected
[ 0.913447] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.954682] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.954687] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.954745] mice: PS/2 mouse device common for all mice
[ 0.954873] rtc_cmos 00:08: RTC can wake from S4
[ 0.954905] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 0.954939] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.955030] device-mapper: uevent: version 1.0.3
[ 0.955107] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx
[ 0.955167] device-mapper: multipath: version 1.1.0 loaded
[ 0.955170] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.955276] EISA: Probing bus 0 at eisa.0
[ 0.955282] Cannot allocate resource for EISA slot 1
[ 0.955284] Cannot allocate resource for EISA slot 2
[ 0.955291] Cannot allocate resource for EISA slot 4
[ 0.955293] Cannot allocate resource for EISA slot 5
[ 0.955295] Cannot allocate resource for EISA slot 6
[ 0.955297] Cannot allocate resource for EISA slot 7
[ 0.955299] Cannot allocate resource for EISA slot 8
[ 0.955301] EISA: Detected 0 cards.
[ 0.955435] cpuidle: using governor ladder
[ 0.956957] cpuidle: using governor menu
[ 0.957440] TCP cubic registered
[ 0.957590] NET: Registered protocol family 10
[ 0.958048] lo: Disabled Privacy Extensions
[ 0.958389] NET: Registered protocol family 17
[ 0.958406] Bluetooth: L2CAP ver 2.13
[ 0.958407] Bluetooth: L2CAP socket layer initialized
[ 0.958410] Bluetooth: SCO (Voice Link) ver 0.6
[ 0.958412] Bluetooth: SCO socket layer initialized
[ 0.958446] Bluetooth: RFCOMM TTY layer initialized
[ 0.958449] Bluetooth: RFCOMM socket layer initialized
[ 0.958451] Bluetooth: RFCOMM ver 1.11
[ 0.959002] Using IPI No-Shortcut mode
[ 0.959064] PM: Resume from disk failed.
[ 0.959075] registered taskstats version 1
[ 0.959186] Magic number: 5:332:271
[ 0.959278] rtc_cmos 00:08: setting system clock to 2009-12-23 08:16:51 UTC (1261556211)
[ 0.959281] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.959283] EDD information not available.
[ 0.986683] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 1.047929] ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-T20L, NC08, max MWDMA2
[ 1.064378] ata4.00: configured for MWDMA2
[ 1.188147] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.188174] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.188201] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.189188] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 1.189198] ata3.00: ATA-7: TOSHIBA MK1237GSX, DL132C, max UDMA/100
[ 1.189201] ata3.00: 234441648 sectors, multi 16: LBA48
[ 1.189219] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 1.189224] ata1.00: ATA-7: TOSHIBA MK1237GSX, DL132C, max UDMA/100
[ 1.189226] ata1.00: 234441648 sectors, multi 16: LBA48
[ 1.190017] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 1.190039] ata1.00: configured for UDMA/100
[ 1.190196] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 1.190217] ata3.00: configured for UDMA/100
[ 1.204435] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1237GS DL13 PQ: 0 ANSI: 5
[ 1.204538] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.204581] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 1.204626] sd 0:0:0:0: [sda] Write Protect is off
[ 1.204628] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.204656] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.204769] sda:
[ 1.204875] scsi 2:0:0:0: Direct-Access ATA TOSHIBA MK1237GS DL13 PQ: 0 ANSI: 5
[ 1.204974] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.205012] sd 2:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 1.205066] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.205074] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.205096] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.205196] sdb:
[ 1.208811] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20L NC08 PQ: 0 ANSI: 5
[ 1.219886] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.219891] Uniform CD-ROM driver Revision: 3.20
[ 1.220026] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 1.220090] sr 3:0:0:0: Attached scsi generic sg2 type 5
[ 1.273815] sda1 sda2 < sda5 sda6 > sda3
[ 1.298480] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.372066] usb 2-4: new high speed USB device using ehci_hcd and address 3
[ 1.500040] Clocksource tsc unstable (delta = -178928275 ns)
[ 1.517318] usb 2-4: configuration #1 chosen from 1 choice
[ 1.562404] sdb1 sdb2 < sdb5 >
[ 1.587142] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.587178] Freeing unused kernel memory: 540k freed
[ 1.587533] Write protecting the kernel text: 4568k
[ 1.587602] Write protecting the kernel read-only data: 1836k
[ 1.707075] Linux agpgart interface v0.103
[ 1.748613] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.748637] r8169 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.748690] r8169 0000:08:00.0: setting latency timer to 64
[ 1.748770] alloc irq_desc for 29 on node -1
[ 1.748772] alloc kstat_irqs on node -1
[ 1.748790] r8169 0000:08:00.0: irq 29 for MSI/MSI-X
[ 1.749434] eth0: RTL8168b/8111b at 0xf8120000, 00:1b:24:67:29:2c, XID 38000000 IRQ 29
[ 1.765001] usb 4-2: new low speed USB device using uhci_hcd and address 2
[ 1.769892] alloc irq_desc for 20 on node -1
[ 1.769895] alloc kstat_irqs on node -1
[ 1.769902] ohci1394 0000:09:09.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.771281] acpi device:06: registered as cooling_device2
[ 1.771407] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/device:03/input/input6
[ 1.771446] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 1.827109] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[f8100000-f81007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 1.944713] usb 4-2: configuration #1 chosen from 1 choice
[ 1.952401] usbcore: registered new interface driver hiddev
[ 2.003259] input: Microsoft Microsoft Wireless Optical Mouse® 1.00 as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input7
[ 2.003329] generic-usb 0003:045E:00E1.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse® 1.00] on usb-0000:00:1a.1-2/input0
[ 2.003342] usbcore: registered new interface driver usbhid
[ 2.003344] usbhid: v2.6:USB HID core driver
[ 2.184049] usb 6-1: new full speed USB device using uhci_hcd and address 2
[ 2.360120] usb 6-1: configuration #1 chosen from 1 choice
[ 3.152643] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00241b0074743300]
[ 3.319326] PM: Starting manual resume from disk
[ 3.319329] PM: Resume from partition 8:5
[ 3.319331] PM: Checking hibernation image.
[ 3.319473] PM: Resume from disk failed.
[ 3.322123] EXT4-fs (sda6): INFO: recovery required on readonly filesystem
[ 3.322127] EXT4-fs (sda6): write access will be enabled during recovery
[ 3.354705] EXT4-fs (sda6): barriers enabled
[ 6.771239] kjournald2 starting: pid 444, dev sda6:8, commit interval 5 seconds
[ 6.771282] EXT4-fs (sda6): delayed allocation enabled
[ 6.771289] EXT4-fs: file extents enabled
[ 6.771867] EXT4-fs: mballoc enabled
[ 6.771881] EXT4-fs (sda6): orphan cleanup on readonly fs
[ 6.771888] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 177786
[ 6.771957] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 135454
[ 6.771975] EXT4-fs (sda6): ext4_orphan_cleanup: deleting unreferenced inode 177425
[ 6.771983] EXT4-fs (sda6): 3 orphan inodes deleted
[ 6.771986] EXT4-fs (sda6): recovery complete
[ 7.037930] EXT4-fs (sda6): mounted filesystem with ordered data mode
[ 7.653318] type=1505 audit(1261556218.193:2): operation="profile_load" pid=467 name=/usr/share/gdm/guest-session/Xsession
[ 7.656164] type=1505 audit(1261556218.196:3): operation="profile_load" pid=468 name=/sbin/dhclient3
[ 7.656965] type=1505 audit(1261556218.196:4): operation="profile_load" pid=468 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 7.657346] type=1505 audit(1261556218.196:5): operation="profile_load" pid=468 name=/usr/lib/connman/scripts/dhclient-script
[ 7.716364] type=1505 audit(1261556218.256:6): operation="profile_load" pid=469 name=/usr/bin/evince
[ 7.727098] type=1505 audit(1261556218.264:7): operation="profile_load" pid=469 name=/usr/bin/evince-previewer
[ 7.733443] type=1505 audit(1261556218.272:8): operation="profile_load" pid=469 name=/usr/bin/evince-thumbnailer
[ 7.762369] type=1505 audit(1261556218.300:9): operation="profile_load" pid=471 name=/usr/lib/cups/backend/cups-pdf
[ 7.763173] type=1505 audit(1261556218.300:10): operation="profile_load" pid=471 name=/usr/sbin/cupsd
[ 7.765755] type=1505 audit(1261556218.304:11): operation="profile_load" pid=472 name=/usr/sbin/tcpdump
[ 26.431534] Adding 1951856k swap on /dev/sda5. Priority:-1 extents:1 across:1951856k
[ 26.437132] udev: starting version 147
[ 26.459511] lp: driver loaded but no devices found
[ 26.581020] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 26.581023] ricoh-mmc: Copyright(c) Philip Langdale
[ 26.581054] ricoh-mmc: Ricoh MMC controller found at 0000:09:09.2 [1180:0843] (rev 12)
[ 26.581073] ricoh-mmc: Controller is now disabled.
[ 26.601094] sdhci: Secure Digital Host Controller Interface driver
[ 26.601097] sdhci: Copyright(c) Pierre Ossman
[ 26.602357] sdhci-pci 0000:09:09.1: SDHCI controller found [1180:0822] (rev 22)
[ 26.602376] sdhci-pci 0000:09:09.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 26.603395] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 26.604451] Registered led device: mmc0::
[ 26.605519] mmc0: SDHCI controller on PCI [0000:09:09.1] using DMA
[ 26.670179] nvidia: module license 'NVIDIA' taints kernel.
[ 26.670183] Disabling lock debugging due to kernel taint
[ 26.702714] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 26.702827] EXT4-fs (sda6): internal journal on sda6:8
[ 26.741202] Linux video capture interface: v2.00
[ 26.744049] uvcvideo: Found UVC 1.00 device HP Webcam (04f2:b023)
[ 26.757300] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input8
[ 26.757347] usbcore: registered new interface driver uvcvideo
[ 26.757351] USB Video Class driver (v0.1.0)
[ 26.873193] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 26.873373] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 26.873376] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 26.873378] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 26.930310] nvidia 0000:01:00.0: power state changed by ACPI to D0
[ 26.930324] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 26.930334] nvidia 0000:01:00.0: setting latency timer to 64
[ 26.930473] NVRM: loading NVIDIA UNIX x86 Kernel Module 185.18.36 Fri Aug 14 17:18:04 PDT 2009
[ 26.933817] cfg80211: Calling CRDA to update world regulatory domain
[ 27.006656] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
[ 27.006659] iwl3945: Copyright(c) 2003-2009 Intel Corporation
[ 27.006774] iwl3945 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 27.006789] iwl3945 0000:02:00.0: setting latency timer to 64
[ 27.021778] cfg80211: World regulatory domain updated:
[ 27.021781] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 27.021784] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 27.021787] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 27.021790] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 27.021792] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 27.021795] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 27.145338] alloc irq_desc for 22 on node -1
[ 27.145342] alloc kstat_irqs on node -1
[ 27.145349] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 27.145398] alloc irq_desc for 30 on node -1
[ 27.145400] alloc kstat_irqs on node -1
[ 27.145412] HDA Intel 0000:00:1b.0: irq 30 for MSI/MSI-X
[ 27.145447] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 27.146125] iwl3945 0000:02:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 27.146129] iwl3945 0000:02:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 27.146244] alloc irq_desc for 31 on node -1
[ 27.146246] alloc kstat_irqs on node -1
[ 27.146277] iwl3945 0000:02:00.0: irq 31 for MSI/MSI-X
[ 27.156281] r8169: eth0: link down
[ 27.156456] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 27.207012] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 27.222065] iwl3945 0000:02:00.0: firmware: requesting iwlwifi-3945-2.ucode
[ 27.258359] iwl3945 0000:02:00.0: loaded firmware version 15.32.2.9
[ 27.280980] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[ 27.283381] type=1505 audit(1261552637.820:12): operation="profile_replace" pid=1081 name=/usr/share/gdm/guest-session/Xsession
[ 27.285302] type=1505 audit(1261552637.824:13): operation="profile_replace" pid=1084 name=/sbin/dhclient3
[ 27.286067] type=1505 audit(1261552637.824:14): operation="profile_replace" pid=1084 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 27.286473] type=1505 audit(1261552637.824:15): operation="profile_replace" pid=1084 name=/usr/lib/connman/scripts/dhclient-script
[ 27.290061] type=1505 audit(1261552637.828:16): operation="profile_replace" pid=1085 name=/usr/bin/evince
[ 27.311511] type=1505 audit(1261552637.848:17): operation="profile_replace" pid=1085 name=/usr/bin/evince-previewer
[ 27.318499] type=1505 audit(1261552637.856:18): operation="profile_replace" pid=1085 name=/usr/bin/evince-thumbnailer
[ 27.329443] type=1505 audit(1261552637.868:19): operation="profile_replace" pid=1099 name=/usr/lib/cups/backend/cups-pdf
[ 27.330347] type=1505 audit(1261552637.868:20): operation="profile_replace" pid=1099 name=/usr/sbin/cupsd
[ 27.332787] type=1505 audit(1261552637.872:21): operation="profile_replace" pid=1101 name=/usr/sbin/tcpdump
[ 27.344851] Registered led device: iwl-phy0::radio
[ 27.344874] Registered led device: iwl-phy0::assoc
[ 27.344933] Registered led device: iwl-phy0::RX
[ 27.344954] Registered led device: iwl-phy0::TX
[ 27.369818] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 28.054457] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000
[ 28.162128] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10
[ 28.879811] ppdev: user-space parallel port driver
[ 49.375565] wlan0: authenticate with AP 00:19:3e:23:4f:62
[ 49.377658] wlan0: authenticated
[ 49.377661] wlan0: associate with AP 00:19:3e:23:4f:62
[ 49.380180] wlan0: RX AssocResp from 00:19:3e:23:4f:62 (capab=0x411 status=0 aid=1)
[ 49.380186] wlan0: associated
[ 49.383275] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 59.965933] wlan0: no IPv6 routers present
Module Size Used by
xt_limit 2176 6
xt_tcpudp 2780 9
ipt_LOG 5344 8
ipt_MASQUERADE 2204 0
xt_DSCP 2844 0
ipt_REJECT 2812 1
nf_conntrack_irc 4992 0
nf_conntrack_ftp 6880 0
xt_state 1820 6
binfmt_misc 8356 1
ppdev 6688 0
joydev 10272 0
snd_hda_codec_si3054 4828 1
snd_hda_codec_realtek 202336 1
arc4 1660 2
ecb 2524 2
snd_hda_intel 26560 4
snd_hda_codec 78300 3 snd_hda_codec_si3054,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 7392 1 snd_hda_codec
snd_pcm_oss 37312 0
snd_mixer_oss 16188 1 snd_pcm_oss
snd_pcm 74976 5 snd_hda_codec_si3054,snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_dummy 2752 0
snd_seq_oss 29280 0
iwl3945 77212 0
iwlcore 112540 1 iwl3945
snd_seq_midi 6624 0
mac80211 181076 2 iwl3945,iwlcore
snd_rawmidi 22208 1 snd_seq_midi
iptable_nat 5500 0
nf_nat 17808 2 ipt_MASQUERADE,iptable_nat
nf_conntrack_ipv4 13352 9 iptable_nat,nf_nat
nf_conntrack 67608 7 ipt_MASQUERADE,nf_conntrack_irc,nf_conntrack_ftp,xt_state,iptable_nat,nf_nat,nf_conntrack_ipv4
nf_defrag_ipv4 1756 1 nf_conntrack_ipv4
iptable_mangle 3452 0
uvcvideo 59080 0
videodev 36736 1 uvcvideo
v4l1_compat 14496 2 uvcvideo,videodev
iptable_filter 3100 1
ip_tables 11692 3 iptable_nat,iptable_mangle,iptable_filter
x_tables 16544 9 xt_limit,xt_tcpudp,ipt_LOG,ipt_MASQUERADE,xt_DSCP,ipt_REJECT,xt_state,iptable_nat,ip_tables
nvidia 9586440 39
sdhci_pci 7100 0
sdhci 17472 1 sdhci_pci
psmouse 56500 0
serio_raw 5280 0
ricoh_mmc 3676 0
cfg80211 93052 3 iwl3945,iwlcore,mac80211
led_class 4096 3 iwl3945,iwlcore,sdhci
snd_seq_midi_event 6940 2 snd_seq_oss,snd_seq_midi
snd_seq 51088 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 21540 2 snd_pcm,snd_seq
snd_seq_device 7208 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 60900 22 snd_hda_codec_si3054,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 7264 1 snd
snd_page_alloc 9060 2 snd_hda_intel,snd_pcm
lp 8964 0
parport 35340 2 ppdev,lp
usbhid 38208 0
ohci1394 29900 0
r8169 32064 0
mii 5212 1 r8169
video 19380 0
output 2780 1 video
ieee1394 86596 1 ohci1394
intel_agp 27484 0
agpgart 34988 2 nvidia,intel_agp
��A T Q 0 V 1 E 0 - O K
A T + G M M - M o t o r o l a H D A u d i o S p e a k e r p h o n e M o d e m
A T + F C L A S S = ? - 0 , 1 . 0 , 8 . 0
A T # C L S = ? - C O M A N D O N O P E R M I T I D O
A T + G C I ? - + G C I : B 5
A T + G C I = ? - + G C I : ( B 5 , 0 0 , 0 2 , 0 4 , 0 7 , 0 9 , 0 A , 0 B , 0 C , 0 D , 0 F , 1 2 , 1 4 , 1 6 , 1 A , 1 B ,
1 E , 2 0 , 2 5 , 2 6 , 2 7 , 2 B , 2 D , 2 E , 3 1 , 3 3 , 3 5 , 3 6 , 3 7 , 3 C , 3 D , 3 E , 4 2 , 4 5 ,
4 6 , 4 8 , 4 9 , 4 F , 5 0 , 5 1 , 5 2 , 5 3 , 5 4 , 5 7 , 5 8 , 5 9 , 5 E , 6 1 , 6 2 , 6 4 , 6 8 , 6 9 ,
6 A , 6 C , 7 0 , 7 3 , 7 5 , 7 7 , 7 B , 7 E , 7 F , 8 1 , 8 2 , 8 3 , 8 4 , 8 5 , 8 7 , 8 8 , 8 9 , 8 A ,
8 B , 8 C , 8 D , 8 E , 9 8 , 9 C , 9 F , A 0 , A 1 , A 5 , A 6 , A 7 , A 9 , A D , A E , B 2 , B 3 , B 4 ,
B 7 , B 8 , B B , B C , C 0 , C 1 , C 3 , C 5 , C 6 , C 7 , C 9 , C A , C B , C C , C D , C E , D 2 , D 3 ,
D 4 , D 5 , E 1 , E 2 , E 3 , E 4 , E 5 )
A T I 1 - 0 0 0
A T I 2 - O K
A T I 3 - S M 5 6 H D A u d i o R e l . 6 . 1 2 . 2 5 . 0 5 D F V
A T I 4 - B u i l t o n M a y 5 2 0 0 9 a t 1 6 : 1 4 : 1 3
A T I 5 - L A S T D I S C O N N E C T : N O N E
A T I 6 - U n i t e d S t a t e s
A T I 7 - M o t o r o l a H D A u d i o S p e a k e r p h o n e M o d e m
A T Q 0 V 1 E 0 - O K
A T + G M M - M o t o r o l a H D A u d i o S p e a k e r p h o n e M o d e m
A T + F C L A S S = ? - 0 , 1 . 0 , 8 . 0
A T # C L S = ? - C O M A N D O N O P E R M I T I D O
A T + G C I ? - + G C I : B 5
A T + G C I = ? - + G C I : ( B 5 , 0 0 , 0 2 , 0 4 , 0 7 , 0 9 , 0 A , 0 B , 0 C , 0 D , 0 F , 1 2 , 1 4 , 1 6 , 1 A , 1 B ,
1 E , 2 0 , 2 5 , 2 6 , 2 7 , 2 B , 2 D , 2 E , 3 1 , 3 3 , 3 5 , 3 6 , 3 7 , 3 C , 3 D , 3 E , 4 2 , 4 5 ,
4 6 , 4 8 , 4 9 , 4 F , 5 0 , 5 1 , 5 2 , 5 3 , 5 4 , 5 7 , 5 8 , 5 9 , 5 E , 6 1 , 6 2 , 6 4 , 6 8 , 6 9 ,
6 A , 6 C , 7 0 , 7 3 , 7 5 , 7 7 , 7 B , 7 E , 7 F , 8 1 , 8 2 , 8 3 , 8 4 , 8 5 , 8 7 , 8 8 , 8 9 , 8 A ,
8 B , 8 C , 8 D , 8 E , 9 8 , 9 C , 9 F , A 0 , A 1 , A 5 , A 6 , A 7 , A 9 , A D , A E , B 2 , B 3 , B 4 ,
B 7 , B 8 , B B , B C , C 0 , C 1 , C 3 , C 5 , C 6 , C 7 , C 9 , C A , C B , C C , C D , C E , D 2 , D 3 ,
D 4 , D 5 , E 1 , E 2 , E 3 , E 4 , E 5 )
A T I 1 - 0 0 0
A T I 2 - O K
A T I 3 - S M 5 6 H D A u d i o R e l . 6 . 1 2 . 2 5 . 0 5 D F V
A T I 4 - B u i l t o n M a y 5 2 0 0 9 a t 1 6 : 1 4 : 1 3
A T I 5 - L A S T D I S C O N N E C T : N O N E
A T I 6 - U n i t e d S t a t e s
A T I 7 - M o t o r o l a H D A u d i o S p e a k e r p h o n e M o d e m
