Hi MarvS, thanks for you reply. I don't think this is a IRQ problem as the compare the different between loading the driver into kernel and before loading it. Here is the dmesg information after loading the driver into kernel and running wvidal:- usb 1-1: new high speed USB device using ehci_hcd and address 4 usb 1-1: New USB device found, idVendor=047e, idProduct=2892 usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1: Product: Agere USB2.0 V.92 SoftModem usb 1-1: Manufacturer: Agere Systems usb 1-1: configuration #2 chosen from 1 choice * Hello Agere Driver ** USB vid 0x47e, pid 0x2892 *=====> Probing. Interf 0xc8492600 ==> x_usb_get_dev(), returns = 0xf5441400 ===> set config, done ===> set interface, done ==> usb_device_speed = 3 get_iface_desc, done ==> bNumEndpoints = 3 *****USB***** PROBE: Loop 0 *****USB***** PROBE: bEndpointAddress 81 *****USB***** PROBE: bmAttributes 2 *****USB***** PROBE: wMaxPacketSize 200 *****USB***** PROBE: Bulk IN endpoint 0 *****USB***** PROBE: Loop 1 *****USB***** PROBE: bEndpointAddress 1 *****USB***** PROBE: bmAttributes 2 *****USB***** PROBE: wMaxPacketSize 200 *****USB***** PROBE: Bulk OUT endpoint 1 *****USB***** PROBE: Loop 2 *****USB***** PROBE: bEndpointAddress 82 *****USB***** PROBE: bmAttributes 3 *****USB***** PROBE: wMaxPacketSize 10 BALA Usb_HandleStartDevice BALA U2InitGpio BALA U2SetEnumerationLED gRomVersion=121 U2 Rom Code Version 1.2.1 USS_CMD_CHANGE_CLK command passed *****USB***** PROBE EXIT : USS2828 device now attached usbcore: registered new interface driver agr12dec2006 Loading module Agere Modem Controller driver version 2.1.80 (2007-10-01) serial8250_register_ports: BaseAddress 0x8004 Irq 22 ttyAGS3 at I/O 0x8004 (irq = 22) is a AgereModem agrserial - ret_val 0, call: lt_modem_ops.init_modem Loading module Agere Modem Interface driver version 2.1.80..0 (2007-10-01) ==> codecType = 0x32 BUG: unable to handle kernel NULL pointer dereference at 00000050 IP: [<f8c72778>] setResumeCallBack+0x8/0x20 [agrmodem] *pdpt = 00000000368d4001 *pde = 0000000000000000 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/system/cpu/cpu1/cpufreq/scaling_cur_freq Modules linked in: agrserial agrmodem hfsplus vfat fat wacom rfcomm bridge stp bnep sco l2cap autofs4 iptable_mangle ipt_MASQUERADE iptable_nat nf_nat ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack xt_tcpudp xt_multiport iptable_filter ip_tables x_tables cpufreq_ondemand fuse dm_mirror dm_region_hash dm_log dm_multipath dm_mod sbs sbshc pci_slot kvm_intel kvm uinput snd_hda_codec_si3054 snd_hda_codec_realtek snd_hda_intel nvidia(P) snd_hda_codec snd_hwdep snd_seq_dummy snd_seq_oss arc4 ecb snd_seq_midi_event snd_seq iwlagn snd_seq_device snd_pcm_oss iwlcore snd_mixer_oss snd_pcm sdhci_pci rfkill sdhci mmc_core ohci1394 mac80211 video ricoh_mmc ieee1394 output btusb led_class snd_timer snd battery ac button tg3 soundcore usb_storage bluetooth videodev cfg80211 v4l1_compat snd_page_alloc iTCO_wdt iTCO_vendor_support pcspkr joydev sg ahci libata sd_mod scsi_mod ext3 jbd uhci_hcd ohci_hcd ssb pcmcia pcmcia_core ehci_hcd [last unloaded: uvcvideo] Pid: 8013, comm: wvdial Tainted: P (2.6.30.10-2_SMP.rhel5 #1) INVALID EIP: 0060:[<f8c72778>] EFLAGS: 00210246 CPU: 0 EIP is at setResumeCallBack+0x8/0x20 [agrmodem] EAX: 00000000 EBX: f836d0c4 ECX: f74b0240 EDX: f83775e9 ESI: f836d0c4 EDI: f836d028 EBP: f54eed00 ESP: f54eed00 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process wvdial (pid: 8013, ti=f54ee000 task=f1df0000 task.ti=f54ee000) Stack: f54eed20 f8c5d6d5 f8c423e0 f83775ea c013470b f8c8bb73 f54eed2c f54eed6f f54eed90 f8c46951 f836d0c4 f82ee048 00000008 00000001 f836d39c 00000004 c8438000 00000001 c05003e0 00000000 00000000 00000000 000280d0 00200246 Call Trace: [<f8c5d6d5>] ? CAzlIntelInit+0x39/0x3c4 [agrmodem] [<f8c423e0>] ? ResumeCallBack+0x0/0x34 [agrmodem] [<c013470b>] ? printk+0x1b/0x20 [<f8c46951>] ? LXHardwareStart+0x11de/0x13fb [agrmodem] [<f8c42108>] ? linux_modem_open+0x45/0x10e [agrmodem] [<c013ce87>] ? mod_timer+0x87/0xd0 [<f8b9c068>] ? wrap_linux_modem_open+0x8/0x10 [agrmodem] [<f8b9c0c8>] ? modemPortOpen+0x8/0x20 [agrmodem] [<f8381fa5>] ? serial8250_startup+0x195/0x350 [agrserial] [<c02b8cd9>] ? uart_startup+0x49/0x150 [<c02ba512>] ? uart_open+0x122/0x340 [<c0283d97>] ? check_tty_count+0x17/0xb0 [<c0285f8b>] ? tty_init_dev+0x8b/0x150 [<c0232f62>] ? kobject_get+0x12/0x20 [<c0286212>] ? tty_open+0x1c2/0x460 [<c019b4da>] ? chrdev_open+0x9a/0x150 [<c0196811>] ? __dentry_open+0xc1/0x240 [<c01979f2>] ? nameidata_to_filp+0x52/0x60 [<c019b440>] ? chrdev_open+0x0/0x150 [<c01a360e>] ? do_filp_open+0x1de/0x750 [<c0196613>] ? do_sys_open+0x53/0xe0 [<c0196709>] ? sys_open+0x29/0x40 [<c0107bd4>] ? sysenter_do_call+0x12/0x28 Code: ff ff ff 5d c3 a3 ac 4f cc f8 0f be 40 04 5d 83 e0 0f c3 55 89 e5 e8 b8 ff ff ff 8b 55 08 88 02 5d c3 90 a1 ac 4f cc f8 55 89 e5 <8b> 50 50 89 15 a4 4f cc f8 8b 55 08 89 50 50 b8 01 00 00 00 5d EIP: [<f8c72778>] setResumeCallBack+0x8/0x20 [agrmodem] SS:ESP 0068:f54eed00 CR2: 0000000000000050 ---[ end trace 78a463e7d29cd5e3 ]--- May be this infomation is useful for analysis the problem, Regards, Jack --- 2010年1月11日 星期一，Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> 寫道﹕ > 寄件人: Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> > 主題: Re: Agere USB modem (047e:2892) - Driver Load but not working > 收件人: jack@xxxxxxxxx > 副本(CC): "discuss" <discuss@xxxxxxxxxxxxx> > 日期: 2010年1月11日,星期一,下午9:47 > Jack, > > Two possibilities > 2) You may have resource conflicts. After the > # modprobe agrserial > # cat /proc/interrupts > to assess what are functions are sharing with the > same IRQ as the modem. > More generally shut down all you can to free up resources > before using > the kernel > > 2) The 2.1.80 Agere/LSI code release is the first we have > access too, > that had USB and chipset 11c11040 support included, > with the first > kernel supported being 2.6.21. Possible it is not > backward compatible > to your 2.6.18 kernel. Alternately some > fixes since then in the Open > Source code components may have broken backwards > compatibility. So > try removing the current module pair and using the.. > > Thus upgrading at least to a 2.6.21 kernel from 2.6.18 may > be > necessary. The earliest 2.1.80 code we have is > represented by the > package > agrsm-2.1.80-2mdv2009.0.src.rpm > 24-Jun-2008 10:24 624K > > Do not have time for more now. > > MarvS > > On Mon, Jan 11, 2010 at 5:50 AM, Jack Fung <m81011181@xxxxxxxxxxxx> > wrote: > > Hi MarvS, > > > > I'm already using > agrsm-11c11040-2.1.80~20091225.tar.bz2 > > with Kernel 2.6.30.10 > > It can compile the module correct and using modporbe > > without product any error on the screen, > > > > any suggestion for this problem? > > > > many thank in advance. > > > > I'm sorry for send this email to discuss-help@xxxxxxxxxxxxx > previously > > > > Jack > > > >> > >> > >> Jack, > >> > >> A code package just updated recently is at > >> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ > >> the agrsm-11c11040-2.1.80~20091225.tar.bz2 > >> which source code are you using. > >> > >> Please join the List through www.linmodem.org so > your > >> messages don't > >> have to be manually approved > >> > >> MarvS > >> > >> 2010/1/10 Jack Fung <m81011181@xxxxxxxxxxxx>: > >> > >> > > Hi All, > >> > >> I have a usb modem plug into the > laptop but > >> i > >> > can't using it even I load the agrmodem.ko > & > >> > agrserial.ko into the kernel. > >> > >> > >> > >> here is the log for information > & error > >> (I > >> > using 2.6.30.10 Kernel) :- > >> > >> > >> > >> <--- > >> > >> Jan 10 17:25:35 lenovo kernel: usb > 1-1: USB > >> > disconnect, address 3 > >> > >> Jan 10 17:25:49 lenovo kernel: usb > 1-1: new > >> high > >> > speed USB device using ehci_hcd and address > 4 > >> > >> Jan 10 17:25:49 lenovo kernel: usb > 1-1: New > >> USB > >> > device found, idVendor=047e, idProduct=2892 > >> > >> Jan 10 17:25:49 lenovo kernel: usb > 1-1: New > >> USB > >> > device strings: Mfr=1, Product=2, > SerialNumber=0 > >> > >> Jan 10 17:25:49 lenovo kernel: usb > 1-1: > >> Product: > >> > Agere USB2.0 V.92 SoftModem > >> > >> Jan 10 17:25:49 lenovo kernel: usb > 1-1: > >> > Manufacturer: Agere Systems > >> > >> Jan 10 17:25:49 lenovo kernel: usb > 1-1: > >> > configuration #2 chosen from 1 choice > >> > >> Jan 10 17:55:56 lenovo kernel: usb > 1-1: USB > >> > disconnect, address 4 > >> > >> Jan 10 17:55:59 lenovo kernel: usb > 1-1: new > >> high > >> > speed USB device using ehci_hcd and address > 5 > >> > >> Jan 10 17:55:59 lenovo kernel: usb > 1-1: New > >> USB > >> > device found, idVendor=047e, idProduct=2892 > >> > >> Jan 10 17:55:59 lenovo kernel: usb > 1-1: New > >> USB > >> > device strings: Mfr=1, Product=2, > SerialNumber=0 > >> > >> Jan 10 17:55:59 lenovo kernel: usb > 1-1: > >> Product: > >> > Agere USB2.0 V.92 SoftModem > >> > >> Jan 10 17:55:59 lenovo kernel: usb > 1-1: > >> > Manufacturer: Agere Systems > >> > >> Jan 10 17:55:59 lenovo kernel: usb > 1-1: > >> > configuration #2 chosen from 1 choice > >> > >> Jan 10 17:55:59 lenovo kernel: * > Hello Agere > >> > Driver ** > >> > >> Jan 10 17:55:59 lenovo kernel: USB > vid 0x47e, > >> pid > >> > 0x2892 > >> > >> Jan 10 17:55:59 lenovo kernel: > >> > >> Jan 10 17:55:59 lenovo kernel: > *=====> > >> Probing. > >> > Interf 0xf48f4b00 > >> > >> Jan 10 17:55:59 lenovo kernel: > ==> > >> > x_usb_get_dev(), returns = 0xf3cb5400 > >> > >> Jan 10 17:55:59 lenovo kernel: > ===> set > >> config, > >> > done > >> > >> Jan 10 17:55:59 lenovo kernel: > ===> set > >> > interface, done > >> > >> Jan 10 17:55:59 lenovo kernel: > ==> > >> > usb_device_speed = 3 > >> > >> Jan 10 17:55:59 lenovo kernel: > >> get_iface_desc, > >> > done > >> > >> Jan 10 17:55:59 lenovo kernel: > ==> > >> > bNumEndpoints = 3 > >> > >> Jan 10 17:55:59 lenovo kernel: > *****USB***** > >> > PROBE: Loop 0 > >> > >> Jan 10 17:55:59 lenovo kernel: > *****USB***** > >> > PROBE: bEndpointAddress 81 > >> > >> Jan 10 17:55:59 lenovo kernel: > *****USB***** > >> > PROBE: bmAttributes 2 > >> > >> Jan 10 17:55:59 lenovo kernel: > *****USB***** > >> > PROBE: wMaxPacketSize 200 > >> > >> Jan 10 17:55:59 lenovo kernel: > *****USB***** > >> > PROBE: Bulk IN endpoint 0 > >> > >> Jan 10 17:55:59 lenovo kernel: > *****USB***** > >> > PROBE: Loop 1 > >> > >> Jan 10 17:55:59 lenovo kernel: > *****USB***** > >> > PROBE: bEndpointAddress 1 > >> > >> Jan 10 17:55:59 lenovo kernel: > *****USB***** > >> > PROBE: bmAttributes 2 > >> > >> Jan 10 17:55:59 lenovo kernel: > *****USB***** > >> > PROBE: wMaxPacketSize 200 > >> > >> Jan 10 17:55:59 lenovo kernel: > *****USB***** > >> > PROBE: Bulk OUT endpoint 1 > >> > >> Jan 10 17:55:59 lenovo kernel: > *****USB***** > >> > PROBE: Loop 2 > >> > >> Jan 10 17:55:59 lenovo kernel: > *****USB***** > >> > PROBE: bEndpointAddress 82 > >> > >> Jan 10 17:55:59 lenovo kernel: > *****USB***** > >> > PROBE: bmAttributes 3 > >> > >> Jan 10 17:55:59 lenovo kernel: > *****USB***** > >> > PROBE: wMaxPacketSize 10 > >> > >> Jan 10 17:55:59 lenovo kernel: BALA > >> > Usb_HandleStartDevice > >> > >> Jan 10 17:55:59 lenovo kernel: BALA > >> U2InitGpio > >> > >> Jan 10 17:55:59 lenovo kernel: BALA > >> > U2SetEnumerationLED > >> > >> > >> Jan 10 17:55:59 lenovo kernel: > >> gRomVersion=121 U2 > >> > Rom Code Version 1.2.1 > >> > >> Jan 10 17:55:59 lenovo kernel: > >> USS_CMD_CHANGE_CLK > >> > command passed > >> > >> Jan 10 17:55:59 lenovo kernel: > *****USB***** > >> PROBE > >> > EXIT : USS2828 device now attached > >> > >> Jan 10 17:55:59 lenovo kernel: > usbcore: > >> registered > >> > new interface driver agr12dec2006 > >> > >> Jan 10 17:56:01 lenovo kernel: > Loading > >> module > >> > Agere Modem Controller driver version 2.1.80 > >> (2007-10-01) > >> > >> Jan 10 17:56:46 lenovo kernel: > >> > serial8250_register_ports: BaseAddress 0x8004 > Irq 22 > >> > >> Jan 10 17:56:46 lenovo kernel: > ttyAGS3 at > >> I/O > >> > 0x8004 (irq = 22) is a AgereModem > >> > >> Jan 10 17:56:46 lenovo kernel: > agrserial - > >> ret_val > >> > 0, call: lt_modem_ops.init_modem > >> > >> Jan 10 17:56:46 lenovo kernel: > Loading > >> module > >> > Agere Modem Interface driver version > 2.1.80.0 > >> (2007-10-01) > >> > >> [root@lenovo tmp]# ls /dev/tt* > >> > >> /dev/tty /dev/tty12 > >> > /dev/tty17 /dev/tty21 /dev/tty26 > >> > /dev/tty30 /dev/tty35 > >> > /dev/tty4 /dev/tty44 /dev/tty49 > >> > /dev/tty53 /dev/tty58 /dev/tty62 > >> > /dev/ttyAGS3 > >> > >> /dev/tty0 /dev/tty13 > >> > /dev/tty18 /dev/tty22 /dev/tty27 > >> > /dev/tty31 /dev/tty36 /dev/tty40 > >> > /dev/tty45 /dev/tty5 /dev/tty54 > >> > /dev/tty59 /dev/tty63 /dev/ttyS0 > >> > >> /dev/tty1 /dev/tty14 > >> > /dev/tty19 /dev/tty23 /dev/tty28 > >> > /dev/tty32 /dev/tty37 /dev/tty41 > >> > /dev/tty46 /dev/tty50 /dev/tty55 > >> > /dev/tty6 /dev/tty7 /dev/ttyS1 > >> > >> /dev/tty10 /dev/tty15 > >> > /dev/tty2 /dev/tty24 /dev/tty29 > >> > /dev/tty33 /dev/tty38 /dev/tty42 > >> > /dev/tty47 /dev/tty51 /dev/tty56 > >> > /dev/tty60 /dev/tty8 /dev/ttyS2 > >> > >> /dev/tty11 /dev/tty16 > /dev/tty20 > >> > /dev/tty25 /dev/tty3 /dev/tty34 > >> > /dev/tty39 /dev/tty43 /dev/tty48 > >> > /dev/tty52 /dev/tty57 /dev/tty61 > >> > /dev/tty9 /dev/ttyS3 > >> > >> [root@lenovo tmp]# ln -s > /dev/ttyAGS3 > >> > /dev/ttySAGR > >> > >> [root@lenovo tmp]# wvdialconf > >> /dev/wvdial.conf > >> > >> Scanning your serial ports for a > modem. > >> > >> > >> > >> Port Scan<*1>: > >> > S0 S1 S2 S3 Killed > >> > >> [root@lenovo tmp]# > >> > >> Message from syslogd@ at Sun Jan 10 > 18:04:41 > >> 2010 > >> > ... > >> > >> lenovo kernel: Oops: 0000 [#1] SMP > >> > >> Message from syslogd@ at Sun Jan 10 > 18:04:41 > >> 2010 > >> > ... > >> > >> lenovo kernel: last sysfs file: > >> > > /sys/devices/system/cpu/cpu1/cpufreq/scaling_cur_freq > >> > >> Message from syslogd@ at Sun Jan 10 > 18:04:41 > >> 2010 > >> > ... > >> > >> lenovo kernel: Process wvdialconf > (pid: > >> 7641, > >> > ti=f48f3000 task=f6a8acb0 task.ti=f48f3000) > >> > >> Message from syslogd@ at Sun Jan 10 > 18:04:41 > >> 2010 > >> > ... > >> > >> lenovo kernel: Stack: > >> > >> Message from syslogd@ at Sun Jan 10 > 18:04:41 > >> 2010 > >> > ... > >> > >> lenovo kernel: f48f3d90 f8c39951 > f82fd0c4 > >> > f8283048 00000008 00000001 f82fd39c 00000004 > >> > >> Message from syslogd@ at Sun Jan 10 > 18:04:41 > >> 2010 > >> > ... > >> > >> lenovo kernel: f5446000 00000001 > c05003e0 > >> > 00000000 00000000 00000000 000280d0 00200202 > >> > >> Message from syslogd@ at Sun Jan 10 > 18:04:41 > >> 2010 > >> > ... > >> > >> lenovo kernel: Call Trace: > >> > >> Message from syslogd@ at Sun Jan 10 > 18:04:41 > >> 2010 > >> > ... > >> > >> lenovo kernel: [<f8c506d5>] > ? > >> > CAzlIntelInit+0x39/0x3c4 [agrmodem] > >> > >> Message from syslogd@ at Sun Jan 10 > 18:04:41 > >> 2010 > >> > ... > >> > >> lenovo kernel: [<f8c353e0>] > ? > >> > ResumeCallBack+0x0/0x34 [agrmodem] > >> > >> Message from syslogd@ at Sun Jan 10 > 18:04:41 > >> 2010 > >> > ... > >> > >> lenovo kernel: [<c013470b>] > ? > >> > printk+0x1b/0x20 > >> > >> Message from syslogd@ at Sun Jan 10 > 18:04:41 > >> 2010 > >> > ... > >> > >> lenovo kernel: [<f8c39951>] > ? > >> > LXHardwareStart+0x11de/0x13fb [agrmodem] > >> > >> Message from syslogd@ at Sun Jan 10 > 18:04:41 > >> 2010 > >> > ... > >> > >> lenovo kernel: [<f8c35108>] > ? > >> > linux_modem_open+0x45/0x10e [agrmodem] > >> > >> Message from syslogd@ at Sun Jan 10 > 18:04:41 > >> 2010 > >> > ... > >> > >> lenovo kernel: [<c013ce87>] > ? > >> > mod_timer+0x87/0xd0 > >> > >> Message from syslogd@ at Sun Jan 10 > 18:04:41 > >> 2010 > >> > ... > >> > >> lenovo kernel: [<f8b8f068>] > ? > >> > wrap_linux_modem_open+0x8/0x10 [agrmodem] > >> > >> Message from syslogd@ at Sun Jan 10 > 18:04:41 > >> 2010 > >> > ... > >> > >> lenovo kernel: [<f8b8f0c8>] > ? > >> > modemPortOpen+0x8/0x20 [agrmodem] > >> > >> Message from syslogd@ at Sun Jan 10 > 18:04:41 > >> 2010 > >> > ... > >> > >> lenovo kernel: [<f8287fa5>] > ? > >> > serial8250_startup+0x195/0x350 [agrserial] > >> > >> Message from syslogd@ at Sun Jan 10 > 18:04:41 > >> 2010 > >> > ... > >> > >> lenovo kernel: [<c02b8cd9>] > ? > >> > uart_startup+0x49/0x150 > >> > >> Message from syslogd@ at Sun Jan 10 > 18:04:41 > >> 2010 > >> > ... > >> > >> lenovo kernel: [<c02ba512>] > ? > >> > uart_open+0x122/0x340 > >> > >> Message from syslogd@ at Sun Jan 10 > 18:04:41 > >> 2010 > >> > ... > >> > >> lenovo kernel: [<c0283d97>] > ? > >> > check_tty_count+0x17/0xb0 > >> > >> Message from syslogd@ at Sun Jan 10 > 18:04:41 > >> 2010 > >> > .... > >> > >> lenovo kernel: [<c0285f8b>] > ? > >> > tty_init_dev+0x8b/0x150 > >> > >> Message from syslogd@ at Sun Jan 10 > 18:04:41 > >> 2010 > >> > ... > >> > >> lenovo kernel: [<c0232f62>] > ? > >> > kobject_get+0x12/0x20 > >> > >> Message from syslogd@ at Sun Jan 10 > 18:04:41 > >> 2010 > >> > ... > >> > >> lenovo kernel: [<c0286212>] > ? > >> > tty_open+0x1c2/0x460 > >> > >> Message from syslogd@ at Sun Jan 10 > 18:04:41 > >> 2010 > >> > ... > >> > >> lenovo kernel: [<c019b4da>] > ? > >> > chrdev_open+0x9a/0x150 > >> > >> Message from syslogd@ at Sun Jan 10 > 18:04:41 > >> 2010 > >> > ... > >> > >> lenovo kernel: [<c0196811>] > ? > >> > __dentry_open+0xc1/0x240 > >> > >> Message from syslogd@ at Sun Jan 10 > 18:04:41 > >> 2010 > >> > ... > >> > >> lenovo kernel: [<c01979f2>] > ? > >> > nameidata_to_filp+0x52/0x60 > >> > >> Message from syslogd@ at Sun Jan 10 > 18:04:41 > >> 2010 > >> > ... > >> > >> lenovo kernel: [<c019b440>] > ? > >> > chrdev_open+0x0/0x150 > >> > >> Message from syslogd@ at Sun Jan 10 > 18:04:41 > >> 2010 > >> > ... > >> > >> lenovo kernel: [<c01a360e>] > ? > >> > do_filp_open+0x1de/0x750 > >> > >> Message from syslogd@ at Sun Jan 10 > 18:04:41 > >> 2010 > >> > ... > >> > >> lenovo kernel: [<c0196613>] > ? > >> > do_sys_open+0x53/0xe0 > >> > >> Message from syslogd@ at Sun Jan 10 > 18:04:41 > >> 2010 > >> > ... > >> > >> lenovo kernel: [<c0196709>] > ? > >> > sys_open+0x29/0x40 > >> > >> Message from syslogd@ at Sun Jan 10 > 18:04:41 > >> 2010 > >> > ... > >> > >> lenovo kernel: [<c0107bd4>] > ? > >> > sysenter_do_call+0x12/0x28 > >> > >> Message from syslogd@ at Sun Jan 10 > 18:04:41 > >> 2010 > >> > ... > >> > >> lenovo kernel: Code: ff ff ff 5d c3 > a3 ac 7f > >> cb f8 > >> > 0f be 40 04 5d 83 e0 0f c3 55 89 e5 e8 b8 ff > ff ff 8b > >> 55 08 > >> > 88 02 5d c3 90 a1 ac 7f cb f8 55 89 e5 > <8b> 50 > >> 50 89 > >> > 15 a4 7f cb f8 8b 55 08 89 50 50 b8 01 00 00 > 00 5d > >> > >> Message from syslogd@ at Sun Jan 10 > 18:04:41 > >> 2010 > >> > ... > >> > >> lenovo kernel: EIP: > [<f8c65778>] > >> > setResumeCallBack+0x8/0x20 [agrmodem] SS:ESP > >> 0068:f48f3d00 > >> > >> Message from syslogd@ at Sun Jan 10 > 18:04:41 > >> 2010 > >> > ... > >> > >> lenovo kernel: CR2: > 0000000000000050 > >> > >> > >> > >> ---> > >> > >> > >> > >> I also try the 2.6.18 kernel CentOS > 5 but > >> the > >> > situration are the same. > >> > >> what can I do for the next steps? > >> > >> > >> > >> Best regards, > >> > >> Jack > >> > >> > > > > > > Yahoo!香港提供網上安全攻略，教你如何防範黑客! 請前往 http://hk.promo.yahoo.com/security/ 了解更多!
