Re: i am following the instructions from the 1stRead.txt

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Βασίλης

We are having problems with the slamr driver dependent modems under
2.6.31 kernels.
But try the following. Do send further transmissions to the List as well,
as I don't my self have this modem hardware.

 From  http://linmodems.technion.ac.il/packages/smartlink/Ubuntu/ ,
 download the package slamr-2.6.31-14-generic.tar.gz
 Under Linux, open a terminal and unpack with:
 $ tar zxvf slamr*.tar.gz
 Move into the unpacked folder
 $ cd slamr-2.6.31-14-generic
 Look around
 $ ls
 Run the
 $  sudo ./setup

 Afterwards do:
 $ slmodemd --help
 $ slmodemd --countrylist &> Clist.txt
 If not in the USA, look for your COUNTRY_NAME therein.
 Do and edit with:
 $ sudo gedit  /etc/default/sl-modem-daemon
 and therein replace the USA in the line:
 SLMODEMD_COUNTRY=USA
 This will provide for the correct Country setting in the automated:
   slmodemd -c COUNTRY /dev/slamr0

 Read the DOCs/Smartlink.txt and DOCs/YourSystem.txt
Writing DOCs/Smartlink.txt

2010/1/3 Βασίλης <piperastaman@xxxxxxxxxxxxxx>:
> i don't know the difference between plain text / html  [and ofcourse i
> wouldn't know how to switch between them...]
>
> thanks for answering so quickly - thankyou for existing.
>
> i attach the .txt (but also i paste it here - since it 's a private
> email now, i guess you don't mind)
>
>  Only plain text email is forwarded by the  Discuss@xxxxxxxxxxxxx List Server,
>  as HTML can contain viruses. Use as the email Subject Line:
>           YourName, YourCountry  kernel 2.6.31-14-generic
>  With this Subject Line cogent experts will be alerted, and useful
> case names left in the Archive.
>  YourCountry will enable Country specific guidance. Linux experts in
> YourCountry
>  can be found through: http://www.linux.org/groups/index.html.
> They will know your Country's modem code, which may be essential for
> dialup service.
> Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an
> Internet Provider mail filters.
>  So in a day, also check the Archived responses at http://www.linmodems.org
> --------------------------  System information ----------------------------
> CPU=i686,
> Linux version 2.6.31-14-generic (buildd@rothera) (gcc version 4.4.1
> (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009
>  scanModem update of:  2009_12_10
>
> The dialer utility package WVDIAL does not appear to be installed on
> your System.
> For Ubuntu users, there are at the bottom of
> http://linmodems.technion.ac.il/packages/
> packages with the files necessary to install wvdial, with names like:
>     wvdial_jaunty_amd64.zip   for x86_64, 64 bit bus systems.
>     wvdial_jaunty_i386.zip    for 32 bit systems.
>     wvdial_karmic_i386.zip    for 32 bit systems.
> These are about 1 MB in size.  After downloaded and copied into your
> Linux partition:
> $ unzip wv*.zip
> Within the new folder:
> $ sudo dpkg -i *.deb
> will  complete the wvdial installation
> Please read Modem/DOCs/wvdial.txt for usage information.
>
> Presently install your Linux Distributions dkms package. It provides
> for automated driver updates,
> following upgrade of your kernel.  For details see
> http://linux.dell.com/projects.shtml#dkms
>
>  There are no blacklisted modem drivers in /etc/modprobe*  files
>
>  Potentially useful modem drivers now loaded are:
>       snd_hda_intel
>
> If a USB modem or cellphone is attached and was not detected, please
> provide available information in your request to discuss@xxxxxxxxxxxxx
>
> For candidate card in slot 03:00.0, firmware information and bootup
> diagnostics are:
>  PCI slot       PCI ID          SubsystemID     Name
>  ----------     ---------       ---------       --------------
>  03:00.0        1057:3052       1057:3020       Modem: Motorola SM56 Data Fax Modem
>
>  Modem interrupt assignment and sharing:
>  19:       6126       6214   IO-APIC-fasteoi   ata_piix, uhci_hcd:usb3
>  --- Bootup diagnostics for card in PCI slot 03:00.0 ----
>
> For candidate card in slot 00:1b.0, firmware information and bootup
> diagnostics are:
>  PCI slot       PCI ID          SubsystemID     Name
>  ----------     ---------       ---------       --------------
>  00:1b.0        8086:27d8       1043:8290       Audio device: Intel Corporation 82801G
>
>  Modem interrupt assignment and sharing:
>  16:        859        863   IO-APIC-fasteoi   uhci_hcd:usb5, HDA Intel
>  --- Bootup diagnostics for card in PCI slot 00:1b.0 ----
>
>
> ===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
> The ALSA packages provide audio support and also drivers for some modems.
> ALSA diagnostics are written during bootup to /proc/asound/ folders.
>
> The ALSA verion is 1.0.20
> The modem cards detected by "aplay -l"  are: None
>
>
> The /proc/asound/pcm file reports:
> -----------------------
> 00-00: ALC662 rev1 Analog : ALC662 rev1 Analog : playback 1 : capture 1
> 00-01: ALC662 rev1 Digital : ALC662 rev1 Digital : playback 1 : capture 1
>
> about /proc/asound/cards:
> ------------------------
>  0 [Intel          ]: HDA-Intel - HDA Intel
>                      HDA Intel at 0xfe7f8000 irq 16
>
>  PCI slot 00:1b.0 has a High Definition Audio Card
>  The drivers are in the kernel modules tree at:
>  /lib/modules/2.6.31-14-generic/kernel/sound/pci/hda/snd-hda-intel.ko
> UNEXPECTED HDA diagnostic outcome.
> === Finished firmware and bootup diagnostics, next deducing cogent software. ===
>
> Predictive  diagnostics for card in bus 03:00.0:
>        Modem chipset  detected on
> NAME="Modem: Motorola SM56 Data Fax Modem "
> CLASS=0703
> PCIDEV=1057:3052
> SUBSYS=1057:3020
> IRQ=19
> IDENT=slamr
>
>  For candidate modem in:  03:00.0
>   0703 Modem: Motorola SM56 Data Fax Modem
>      Primary device ID:  1057:3052
>  Support type needed or chipset:        slamr
>
>
>
> Writing DOCs/Intel.txt
>
>  1057:3052 has a Motorola chipset, poorly supported by Motorola itself
>  However Zello discovered that drivers written to support Smartlink
> modems do support the 1057:3052 chipset!!
>  It sufficed to add 1057:3052 to the list of modem cards recognized by
> the Smartlink slamr driver.
>  There is a ungrab-winmodem driver used in conjunction with slamr,
> which must have 1057:3052
>  similarly added. See messages from Zello:
>        http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00846.html
>        http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00848.html
>  and Alvaro Aguirre about the ungrab-winmodem fix:
>        http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00990.html
>  For general guidance on ungrab-winmodem + slamr usage, read the
> DOCs/Smartlink.txt
>
> The modem is supported by the Smartlink
> plus the slmodemd helper utility.  Read the
> DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through guidance.
>
>
>  From  http://linmodems.technion.ac.il/packages/smartlink/Ubuntu/ ,
>  download the package slamr-2.6.31-14-generic.tar.gz
>  Under Linux, open a terminal and unpack with:
>  $ tar zxvf slamr*.tar.gz
>  Move into the unpacked folder
>  $ cd slamr-2.6.31-14-generic
>  Look around
>  $ ls
>  Run the
>  $  sudo ./setup
>
>  Afterwards do:
>  $ slmodemd --help
>  $ slmodemd --countrylist &> Clist.txt
>  If not in the USA, look for your COUNTRY_NAME therein.
>  Do and edit with:
>  $ sudo gedit  /etc/default/sl-modem-daemon
>  and therein replace the USA in the line:
>  SLMODEMD_COUNTRY=USA
>  This will provide for the correct Country setting in the automated:
>    slmodemd -c COUNTRY /dev/slamr0
>
>  Read the DOCs/Smartlink.txt and DOCs/YourSystem.txt
> Writing DOCs/Smartlink.txt
> ============ end Smartlink section =====================
>
>
> Predictive  diagnostics for card in bus 00:1b.0:
>        Modem chipset not detected on
> NAME="Audio device: Intel Corporation 82801G "
> CLASS=0403
> PCIDEV=8086:27d8
> SUBSYS=1043:8290
> IRQ=16
> HDA=8086:27d8
> SOFT=8086:27d8.HDA
>
>
>  High Definition Audio (HDA) cards MAY host a modem chip in their Subsystem,
>  and many are supported by the ALSA audio+modem driver snd-hda-intel
>  A modem was not detected on HDA card 8086:27d8.
>  If another modem card is present, then most likely 8086:27d8 does not
> host a modem.
>  If another modem card has not been detected, then possibilities are:
>        1) A Conexant modem chip is present on 8086:27d8, as Conexant chips
>  are frequently not detectable by ALSA diagnostics
>        2) The modem may be of the older non-PCI Controller Chipset (hardware) type.
> Try detection with Root permission:
>        sudo wvdialconf  /etc/wvdial.conf
>
>  For candidate modem in:  00:1b.0
>   0403 Audio device: Intel Corporation 82801G
>      Primary device ID:  8086:27d8
>    Subsystem PCI_id  1043:8290
>    Softmodem codec or chipset from diagnostics:
>                               from    Archives:
>
>
>
> Support type needed or chipset:
>
> Support can likely be achieved through two mutually exclusive alternatives:
> 1) The hsfmodem software for Conexant chipset modems: Read DOCs/Conexant.txt
> The following ALSA alternative CANNOT work with Conexant modems.
>
> 2) An ALSA modem driver plus slmodemd.  Read DOCs/Smartlink.txt for details, and
> to test get the package SLMODEMD.gcc4.4.tar.gz from:
>        http://linmodems.technion.ac.il/packages/smartlink/
>
>
>  Completed candidate modem analyses.
>
>  The base of the UDEV device file system is: /dev/.udev
>
>  Versions adequately match for the compiler installed: 4.4.1
>             and the compiler used in kernel assembly: 4.4.1
>
>  The patch utility is needed and is needed for compiling ALSA drivers,
> and possibly others.
>
>
>  Minimal compiling resources appear complete:
>   make utility - /usr/bin/make
>   Compiler version 4.4
>   linuc_headers base folder /lib/modules/2.6.31-14-generic/build
>
>  However some compilations and executable functions may need additional files,
>  in the FileNames.h (so called kernel "h"eaders) collection installed
> in  /usr/include/ .
>  For martian_modem, additional required packages are needed. The also
> required headers of package libc6 are commonly installed by default.
>  Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev
> packages, for kernels 2.6.24 and later versions.
>  In not included on your install CD, search for them at
> http://packages.ubuntu.com
>  or comparable Repository for other Linux distros.
>  When compiling ALSA drivers, the utility "patch" will also be needed.
>
>
>
>
> If a driver compilation fails, with message including some lack of
> some FileName.h (stdio.h for example), then
> Some additional kernel-header files need installation to /usr/include.
> The minimal additional packages are libc6-dev
> and any of its dependents, under Ubuntu linux-libc-dev
>
> If an alternate ethernet connection is available,
> $  apt-get update
> $  apt-get -s install linux-kernel-devel
> will install needed packages.
> For Debian/Ubuntu related distributions, run the following command to
> display the needed package list:
>
> Otherwise packages have to be found through http://packages.ubuntu.com
> Once downloaded and transferred into a Linux partition,
> they can be installed alltogether with:
> $ sudo dpkg -i *.deb
>
>
> Checking pppd properties:
>        -rwsr-xr-- 1 root dip 277352 2009-02-20 19:25 /usr/sbin/pppd
>
> In case of an "error 17" "serial loopback" problem, see:
>    http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
>
> To enable dialout without Root permission do:
>        $ su - root  (not for Ubuntu)
>        sudo chmod a+x /usr/sbin/pppd
> or under Ubuntu related Linuxes
>        sudo chmod a+x /usr/sbin/pppd
>
> Checking settings of:   /etc/ppp/options
> asyncmap 0
> noauth
> crtscts
> lock
> hide-password
> modem
> proxyarp
> lcp-echo-interval 30
> lcp-echo-failure 4
> noipx
>
> In case of a message like:
>   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
>
> Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
> Which can interfere with Browser naviagation.
>
>  Don't worry about the following, it is for experts should trouble
> shooting be necessary.
> ==========================================================
>
>  Checking for modem support lines:
>  --------------------------------------
>     /device/modem symbolic link:
> slmodemd created symbolic link /dev/ttySL0:
>     Within /etc/udev/ files:
>
>     Within /etc/modprobe.conf files:
> /etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in
> order to blacklist unwanted modem drivers
> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
> /etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
> /etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
>     Within any ancient /etc/devfs files:
>
>     Within ancient kernel 2.4.n /etc/module.conf files:
>
> --------- end modem support lines --------
>


[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux