Philip and/or Kristy,
scanModem reports that your modem is supported through hsfmodem drivers :
For candidate modem in: 00:1f.6
0703 Modem: Intel Corporation 82801DB/DBL/DBM
Primary device ID: 8086:24c6
Subsystem PCI_id 104d:818c
Softmodem codec or chipset from diagnostics:
from Archives: CXT, a Conexant type
using hsfmodem software.
CXTnn is a generic for all CXTnumbers, with Linuxant hsfmodem
software support.
Support type needed or chipset: hsfmodem
Writing DOCs/Intel.txt
For owners of a Dell PCs with Conexant HSF modems, a driver source
package with full speed enabled is available, but requires driver
compiling. Read DOCs/Conexant.txt
From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
download hsfmodem-7.80.02.02full_k2.6.28_15_generic_ubuntu_i386.deb.zip
Under Linux unpack with:
$ unzip hsfmodem*.zip
Then install with:
$ sudo dpkg -i hsfmodem*.deb
Subsequently, the modem should be found with
$ sudo wvdialconf /etc/wvdial.conf
Edit in your personal information with:
$ sudo gedit /etc/wvdial.conf
and try dialing out with:
$ sudo wvdial.
See DOCs/Testing.txt for details.
If you download & install the suggested driver and the modem does not
respond, please read the follownig and apply it to see how to proceed:
Modem interrupt assignment and sharing:
9: 59665 XT-PIC-XT acpi, ehci_hcd:usb1,
uhci_hcd:usb2, uhci_hcd:usb3, uhci_hcd:usb4, ohci1394, ipw2200, yenta,
Intel 82801DB-ICH4, radeon@pci:0000:01:00.0, eth0
--- Bootup diagnostics for card in PCI slot 00:1f.6 ----
[ 0.433571] pci 0000:00:1f.6: reg 10 io port: [0x2400-0x24ff]
[ 0.433577] pci 0000:00:1f.6: reg 14 io port: [0x2000-0x207f]
[ 0.433604] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.433608] pci 0000:00:1f.6: PME# disabled
[ 1.473009] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 9
(level, low) -> IRQ 9
[ 1.473016] serial 0000:00:1f.6: PCI INT B disabled
The PCI slot 00:1f.6 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
Regards,
Antonio
On 11/25/09, Phillip and Kristy Andreason <pkandreason@xxxxxxx> wrote:
> Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List
> Server,
> as HTML can contain viruses. Use as the email Subject Line:
> YourName, YourCountry kernel 2.6.28-15-generic
> With this Subject Line cogent experts will be alerted, and useful case
> names left in the Archive.
> YourCountry will enable Country specific guidance. Linux experts in
> YourCountry
> can be found through: http://www.linux.org/groups/index.html.
> They will know your Country's modem code, which may be essential for dialup
> service.
> Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet
> Provider mail filters.
> So in a day, also check the Archived responses at http://www.linmodems.org
> -------------------------- System information ----------------------------
> CPU=i686,
> Linux version 2.6.28-15-generic (buildd@rothera) (gcc version 4.3.3 (Ubuntu
> 4.3.3-5ubuntu4) ) #52-Ubuntu SMP Wed Sep 9 10:49:34 UTC 2009
> scanModem update of: 2009_11_14
>
>
> The dkms driver upgrade utilities are installed,
>
> There are no blacklisted modem drivers in /etc/modprobe* files
>
> Potentially useful modem drivers now loaded are:
>
>
> Attached USB devices are:
> ID 058f:6387 Alcor Micro Corp. Transcend JetFlash Flash Drive
> If a cellphone is not detected, see
> http://ubuntuforums.org/archive/index.php/t-878554.html
> A sample report is:
> http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
>
> If a USB modem or cellphone is attached and was not detected, please
> provide available information in your request to discuss@xxxxxxxxxxxxx
>
> For candidate card in slot 00:1f.6, firmware information and bootup
> diagnostics are:
> PCI slot PCI ID SubsystemID Name
> ---------- --------- --------- --------------
> 00:1f.6 8086:24c6 104d:818c Modem: Intel Corporation 82801DB/DBL/DBM
>
> Modem interrupt assignment and sharing:
> 9: 59665 XT-PIC-XT acpi, ehci_hcd:usb1, uhci_hcd:usb2,
> uhci_hcd:usb3, uhci_hcd:usb4, ohci1394, ipw2200, yenta, Intel 82801DB-ICH4,
> radeon@pci:0000:01:00.0, eth0
> --- Bootup diagnostics for card in PCI slot 00:1f.6 ----
> [ 0.433571] pci 0000:00:1f.6: reg 10 io port: [0x2400-0x24ff]
> [ 0.433577] pci 0000:00:1f.6: reg 14 io port: [0x2000-0x207f]
> [ 0.433604] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
> [ 0.433608] pci 0000:00:1f.6: PME# disabled
> [ 1.473009] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 9 (level,
> low) -> IRQ 9
> [ 1.473016] serial 0000:00:1f.6: PCI INT B disabled
>
> The PCI slot 00:1f.6 of the modem card may be disabled early in
> a bootup process, but then enabled later. If modem drivers load
> but the modem is not responsive, read DOCs/Bootup.txt about possible
> fixes.
> Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
> if help is needed.
>
>
>
> ===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
> The ALSA packages provide audio support and also drivers for some modems.
> ALSA diagnostics are written during bootup to /proc/asound/ folders.
>
> The ALSA verion is 1.0.18
> The modem cards detected by "aplay -l" are: None
>
>
> The /proc/asound/pcm file reports:
> -----------------------
> 00-00: Intel ICH : Intel 82801DB-ICH4 : playback 1 : capture 1
> 00-01: Intel ICH - MIC ADC : Intel 82801DB-ICH4 - MIC ADC : capture 1
> 00-02: Intel ICH - MIC2 ADC : Intel 82801DB-ICH4 - MIC2 ADC : capture 1
> 00-03: Intel ICH - ADC2 : Intel 82801DB-ICH4 - ADC2 : capture 1
> 00-04: Intel ICH - IEC958 : Intel 82801DB-ICH4 - IEC958 : playback 1
>
> about /proc/asound/cards:
> ------------------------
> 0 [I82801DBICH4 ]: ICH4 - Intel 82801DB-ICH4
> Intel 82801DB-ICH4 with AD1981B at irq 9
> === Finished firmware and bootup diagnostics, next deducing cogent software.
> ===
>
> Predictive diagnostics for card in bus 00:1f.6:
> Modem chipset detected on
> NAME="Modem: Intel Corporation 82801DB/DBL/DBM "
> CLASS=0703
> PCIDEV=8086:24c6
> SUBSYS=104d:818c
> IRQ=9
> SOFT=8086:24c6.MC97
> CodecArchived=CXT
> CodecClass=CXT
> IDENT=hsfmodem
> Driver=hsfmodem-drivers
>
> For candidate modem in: 00:1f.6
> 0703 Modem: Intel Corporation 82801DB/DBL/DBM
> Primary device ID: 8086:24c6
> Subsystem PCI_id 104d:818c
> Softmodem codec or chipset from diagnostics:
> from Archives: CXT, a Conexant type using
> hsfmodem software.
> CXTnn is a generic for all CXTnumbers, with Linuxant hsfmodem
> software support.
>
>
> Support type needed or chipset: hsfmodem
>
>
> Writing DOCs/Intel.txt
>
> For owners of a Dell PCs with Conexant HSF modems, a driver source package
> with full speed enabled is available, but requires driver compiling. Read
> DOCs/Conexant.txt
>
> From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
> download hsfmodem-7.80.02.02full_k2.6.28_15_generic_ubuntu_i386.deb.zip
> Under Linux unpack with:
> $ unzip hsfmodem*.zip
> Then install with:
> $ sudo dpkg -i hsfmodem*.deb
> Subsequently, the modem should be found with
> $ sudo wvdialconf /etc/wvdial.conf
> Edit in your personal information with:
> $ sudo gedit /etc/wvdial.conf
> and try dialing out with:
> $ sudo wvdial.
> See DOCs/Testing.txt for details.
>
> The directions following below need only be pursued, if the above
> procedures are not adequate.
>
> Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find
> the
> hsfmodem package matching your System. For several Linux distros, there are
> precompiled drivers matched to specific kernels. These have within the
> FileName,
> your KernelVersion: 2.6.28_15_generic
> They can be found through
> http://www.linuxant.com/drivers/hsf/full/downloads.php
> A more precise location may be given a few paragraphs below.
> If an EXACT Match with your your KernelVersion is not found, one of the
> "Generic packages with source" near the bottom of the page must be used.
> Downloaded packages must be moved into the Linux partition (home folder is
> OK)
> and unzipped with:
> unzip hsf*.zip
> The installation command for a .deb suffic packages is, with root/adm
> permission:
> sudo dpkg -i hsf*.deb
> while for .rpm suffix it is, with:
> rpm -i hsf*.rpm
> Read DOCs/Conexant.txt
>
> Writing DOCs/Conexant.txt
>
>
> Completed candidate modem analyses.
>
> The base of the UDEV device file system is: /dev/.udev
>
> Versions adequately match for the compiler installed: 4.3.3
> and the compiler used in kernel assembly: 4.3.3
>
>
>
> Minimal compiling resources appear complete:
> make utility - /usr/bin/make
> Compiler version 4.3
> linuc_headers base folder /lib/modules/2.6.28-15-generic/build
>
> However some compilations and executable functions may need additional
> files,
> in the FileNames.h (so called kernel "h"eaders) collection installed in
> /usr/include/ .
> For martian_modem, additional required packages are needed. The also
> required headers of package libc6 are commonly installed by default.
> Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev
> packages, for kernels 2.6.24 and later versions.
> In not included on your install CD, search for them at
> http://packages.ubuntu.com
> or comparable Repository for other Linux distros.
> When compiling ALSA drivers, the utility "patch" will also be needed.
>
>
>
>
> If a driver compilation fails, with message including some lack of some
> FileName.h (stdio.h for example), then
> Some additional kernel-header files need installation to /usr/include. The
> minimal additional packages are libc6-dev
> and any of its dependents, under Ubuntu linux-libc-dev
>
> If an alternate ethernet connection is available,
> $ apt-get update
> $ apt-get -s install linux-kernel-devel
> will install needed packages.
> For Debian/Ubuntu related distributions, run the following command to
> display the needed package list:
>
> Otherwise packages have to be found through http://packages.ubuntu.com
> Once downloaded and transferred into a Linux partition,
> they can be installed alltogether with:
> $ sudo dpkg -i *.deb
>
>
> Checking pppd properties:
> -rwsr-xr-- 1 root dip 277352 2009-02-20 12:25 /usr/sbin/pppd
>
> In case of an "error 17" "serial loopback" problem, see:
> http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
>
> To enable dialout without Root permission do:
> $ su - root (not for Ubuntu)
> sudo chmod a+x /usr/sbin/pppd
> or under Ubuntu related Linuxes
> sudo chmod a+x /usr/sbin/pppd
>
> Checking settings of: /etc/ppp/options
> asyncmap 0
> noauth
> crtscts
> lock
> hide-password
> modem
> proxyarp
> lcp-echo-interval 30
> lcp-echo-failure 4
> noipx
>
> In case of a message like:
> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
>
> Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 eth1
> Which can interfere with Browser naviagation.
>
> Don't worry about the following, it is for experts should trouble shooting
> be necessary.
> ==========================================================
>
> Checking for modem support lines:
> --------------------------------------
> /device/modem symbolic link:
> slmodemd created symbolic link /dev/ttySL0:
> Within /etc/udev/ files:
>
> Within /etc/modprobe.conf files:
> /etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to
> blacklist unwanted modem drivers
> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
> /etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
> /etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
> Within any ancient /etc/devfs files:
>
> Within ancient kernel 2.4.n /etc/module.conf files:
>
> --------- end modem support lines --------
>
