hi
my modem on laptop hp pavilion dv 2530 dont work in ubuntu
please help me
CPU0 CPU1
0: 15122 15248 IO-APIC-edge timer
1: 71 71 IO-APIC-edge i8042
8: 1 0 IO-APIC-edge rtc0
9: 201 188 IO-APIC-fasteoi acpi
12: 11809 11212 IO-APIC-edge i8042
14: 1302 1241 IO-APIC-edge ata_piix
15: 0 0 IO-APIC-edge ata_piix
16: 135 149 IO-APIC-fasteoi uhci_hcd:usb3, ohci1394, nvidia
18: 1 1 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb7, mmc0
19: 0 0 IO-APIC-fasteoi uhci_hcd:usb6
21: 12 10 IO-APIC-fasteoi uhci_hcd:usb4
22: 1281 1258 IO-APIC-fasteoi HDA Intel
23: 9 11 IO-APIC-fasteoi ehci_hcd:usb2, uhci_hcd:usb5
2296: 0 0 PCI-MSI-edge iwl3945
2297: 1 0 PCI-MSI-edge eth0
2298: 6077 5873 PCI-MSI-edge ahci
NMI: 0 0 Non-maskable interrupts
LOC: 12036 14723 Local timer interrupts
RES: 10647 11290 Rescheduling interrupts
CAL: 6236 3670 Function call interrupts
TLB: 1023 195 TLB shootdowns
SPU: 0 0 Spurious interrupts
ERR: 0
MIS: 0
[ 0.000000] BIOS EBDA/lowmem at: 0009f800/0009f800
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-11-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009 (Ubuntu 2.6.28-11.42-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fec0000 (usable)
[ 0.000000] BIOS-e820: 000000007fec0000 - 000000007fedf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fedf000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x7fec0 max_arch_pfn = 0x100000
[ 0.000000] Scanning 2 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 0000000000007000 (usable)
[ 0.000000] modified: 0000000000007000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 0000000000092800 (usable)
[ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007fec0000 (usable)
[ 0.000000] modified: 000000007fec0000 - 000000007fedf000 (ACPI NVS)
[ 0.000000] modified: 000000007fedf000 - 0000000080000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[ 0.000000] RAMDISK: 378bc000 - 37fef95c
[ 0.000000] Allocated new RAMDISK: 00881000 - 00fb495c
[ 0.000000] Move RAMDISK from 00000000378bc000 - 0000000037fef95b to 00881000 - 00fb495b
[ 0.000000] ACPI: RSDP 000F7E20, 0024 (r2 PTLTD )
[ 0.000000] ACPI: XSDT 7FED00B3, 0074 (r1 HPQOEM SLIC-MPC 6040000 LTP 0)
[ 0.000000] ACPI: FACP 7FEDBC3A, 00F4 (r3 INTEL CRESTLNE 6040000 ALAN 1)
[ 0.000000] ACPI: DSDT 7FED0F4F, AC77 (r2 INTEL CRESTLNE 6040000 MSFT 3000000)
[ 0.000000] ACPI: FACS 7FEDEFC0, 0040
[ 0.000000] ACPI: HPET 7FEDBD2E, 0038 (r1 INTEL CRESTLNE 6040000 LOHR 5A)
[ 0.000000] ACPI: MCFG 7FEDBD66, 003C (r1 INTEL CRESTLNE 6040000 LOHR 5A)
[ 0.000000] ACPI: TCPA 7FEDBDA2, 0032 (r1 Intel CRESTLN 6040000 5A52)
[ 0.000000] ACPI: TMOR 7FEDBDD4, 0026 (r1 PTLTD 6040000 PTL 3)
[ 0.000000] ACPI: SLIC 7FEDBDFA, 0176 (r1 HPQOEM SLIC-MPC 6040000 HPQ 1)
[ 0.000000] ACPI: APIC 7FEDBF70, 0068 (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: BOOT 7FEDBFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
[ 0.000000] ACPI: SSDT 7FED0C72, 02DD (r1 SataRe SataAhci 1000 INTL 20061109)
[ 0.000000] ACPI: SSDT 7FED0127, 04E6 (r1 PmRef CpuPm 3000 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1162MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 00000000 - 373fe000
[ 0.000000] bootmap 00012000 - 00018e80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 000087c52c] TEXT DATA BSS ==> [0000100000 - 000087c52c]
[ 0.000000] #4 [000087d000 - 0000881000] INIT_PG_TABLE ==> [000087d000 - 0000881000]
[ 0.000000] #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #7 [0000881000 - 0000fb495c] NEW RAMDISK ==> [0000881000 - 0000fb495c]
[ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
[ 0.000000] found SMP MP-table at [c00f7e50] 000f7e50
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0007fec0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x00000007
[ 0.000000] 0: 0x00000010 -> 0x00000092
[ 0.000000] 0: 0x00000100 -> 0x0007fec0
[ 0.000000] On node 0 totalpages: 523845
[ 0.000000] free_area_init_node: node 0, pgdat c06d0f80, node_mem_map c1000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3941 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2326 pages used for memmap
[ 0.000000] HighMem zone: 295340 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 0000000000007000 - 0000000000010000
[ 0.000000] PM: Registered nosave memory: 0000000000092000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519751
[ 0.000000] Kernel command line: root=UUID=0fe09786-d927-428b-8ba1-d9702378360d ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1995.279 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] allocated 10479360 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Scanning for low memory corruption every 60 seconds
[ 0.004000] Memory: 2051876k/2095872k available (4126k kernel code, 42636k reserved, 2208k data, 532k init, 1190664k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.004000] .init : 0xc0737000 - 0xc07bc000 ( 532 kB)
[ 0.004000] .data : 0xc0507a6f - 0xc072fe60 (2208 kB)
[ 0.004000] .text : 0xc0100000 - 0xc0507a6f (4126 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.55 BogoMIPS (lpj=7981116)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Mount-cache hash table entries: 512
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 4096K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] using mwait in idle threads.
[ 0.004000] Checking 'hlt' instruction... OK.
[ 0.018162] ACPI: Core revision 20080926
[ 0.021785] ACPI: Checking initramfs for custom DSDT
[ 0.296451] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.337214] CPU0: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a
[ 0.340001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 3990.37 BogoMIPS (lpj=7980744)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 4096K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.424604] CPU1: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a
[ 0.424620] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.428034] Brought up 2 CPUs
[ 0.428037] Total of 2 processors activated (7980.93 BogoMIPS).
[ 0.428089] CPU0 attaching sched-domain:
[ 0.428092] domain 0: span 0-1 level MC
[ 0.428094] groups: 0 1
[ 0.428100] CPU1 attaching sched-domain:
[ 0.428102] domain 0: span 0-1 level MC
[ 0.428104] groups: 1 0
[ 0.428171] net_namespace: 776 bytes
[ 0.428171] Booting paravirtualized kernel on bare hardware
[ 0.428316] Time: 12:24:41 Date: 10/13/09
[ 0.428316] regulator: core version 0.5
[ 0.428316] NET: Registered protocol family 16
[ 0.428316] EISA bus registered
[ 0.428316] ACPI: bus type pci registered
[ 0.428316] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.428316] PCI: MCFG area at e0000000 reserved in E820
[ 0.428316] PCI: Using MMCONFIG for extended config space
[ 0.428316] PCI: Using configuration type 1 for base access
[ 0.429116] ACPI: EC: Look up EC in DSDT
[ 0.435652] ACPI: BIOS _OSI(Linux) query ignored
[ 0.439185] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.440039] ACPI: EC: GPE storm detected, transactions will use polling mode
[ 0.940006] ACPI: EC: missing confirmations, switch off interrupt mode.
[ 0.945007] ACPI: Interpreter enabled
[ 0.945012] ACPI: (supports S0 S3 S4 S5)
[ 0.945031] ACPI: Using IOAPIC for interrupt routing
[ 0.977177] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.977179] ACPI: EC: driver started in poll mode
[ 0.977350] ACPI: No dock devices found.
[ 0.977359] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.977453] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.977456] pci 0000:00:01.0: PME# disabled
[ 0.977548] pci 0000:00:1a.0: reg 20 io port: [0x1840-0x185f]
[ 0.977617] pci 0000:00:1a.1: reg 20 io port: [0x1860-0x187f]
[ 0.977690] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf4505c00-0xf4505fff]
[ 0.977742] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.977747] pci 0000:00:1a.7: PME# disabled
[ 0.977805] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf4500000-0xf4503fff]
[ 0.977850] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.977855] pci 0000:00:1b.0: PME# disabled
[ 0.977925] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.977930] pci 0000:00:1c.0: PME# disabled
[ 0.978004] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.978009] pci 0000:00:1c.1: PME# disabled
[ 0.978085] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.978090] pci 0000:00:1c.2: PME# disabled
[ 0.978163] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.978168] pci 0000:00:1c.3: PME# disabled
[ 0.978238] pci 0000:00:1d.0: reg 20 io port: [0x1880-0x189f]
[ 0.978304] pci 0000:00:1d.1: reg 20 io port: [0x18a0-0x18bf]
[ 0.978371] pci 0000:00:1d.2: reg 20 io port: [0x18c0-0x18df]
[ 0.978442] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf4506000-0xf45063ff]
[ 0.978493] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.978498] pci 0000:00:1d.7: PME# disabled
[ 0.978657] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.978661] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[ 0.978697] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.978706] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.978714] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.978722] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.978730] pci 0000:00:1f.1: reg 20 io port: [0x1830-0x183f]
[ 0.978806] pci 0000:00:1f.2: reg 10 io port: [0x1c10-0x1c17]
[ 0.978814] pci 0000:00:1f.2: reg 14 io port: [0x1c04-0x1c07]
[ 0.978822] pci 0000:00:1f.2: reg 18 io port: [0x1c08-0x1c0f]
[ 0.978830] pci 0000:00:1f.2: reg 1c io port: [0x1c00-0x1c03]
[ 0.978838] pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff]
[ 0.978847] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf4505000-0xf45057ff]
[ 0.978868] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.978873] pci 0000:00:1f.2: PME# disabled
[ 0.978908] pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff]
[ 0.978935] pci 0000:00:1f.3: reg 20 io port: [0x1c20-0x1c3f]
[ 0.978997] pci 0000:01:00.0: reg 10 32bit mmio: [0xce000000-0xceffffff]
[ 0.979009] pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.979021] pci 0000:01:00.0: reg 1c 64bit mmio: [0xcc000000-0xcdffffff]
[ 0.979028] pci 0000:01:00.0: reg 24 io port: [0x2000-0x207f]
[ 0.979035] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.979108] pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
[ 0.979112] pci 0000:00:01.0: bridge 32bit mmio: [0xcc000000-0xceffffff]
[ 0.979117] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.979180] pci 0000:00:1c.0: bridge io port: [0x3000-0x3fff]
[ 0.979185] pci 0000:00:1c.0: bridge 32bit mmio: [0xf2000000-0xf3ffffff]
[ 0.979194] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf0000000-0xf1ffffff]
[ 0.979279] pci 0000:05:00.0: reg 10 64bit mmio: [0xf4000000-0xf4003fff]
[ 0.979290] pci 0000:05:00.0: reg 18 io port: [0x4000-0x40ff]
[ 0.979342] pci 0000:05:00.0: supports D1 D2
[ 0.979344] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.979350] pci 0000:05:00.0: PME# disabled
[ 0.979418] pci 0000:00:1c.1: bridge io port: [0x4000-0x4fff]
[ 0.979423] pci 0000:00:1c.1: bridge 32bit mmio: [0xf4000000-0xf40fffff]
[ 0.979646] pci 0000:07:00.0: reg 10 32bit mmio: [0xf4100000-0xf4100fff]
[ 0.979808] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
[ 0.979821] pci 0000:07:00.0: PME# disabled
[ 0.979932] pci 0000:00:1c.3: bridge 32bit mmio: [0xf4100000-0xf41fffff]
[ 0.979997] pci 0000:08:09.0: reg 10 32bit mmio: [0xf4200000-0xf42007ff]
[ 0.980051] pci 0000:08:09.0: supports D1 D2
[ 0.980053] pci 0000:08:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.980058] pci 0000:08:09.0: PME# disabled
[ 0.980100] pci 0000:08:09.1: reg 10 32bit mmio: [0xf4200800-0xf42008ff]
[ 0.980150] pci 0000:08:09.1: supports D1 D2
[ 0.980152] pci 0000:08:09.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.980157] pci 0000:08:09.1: PME# disabled
[ 0.980200] pci 0000:08:09.2: reg 10 32bit mmio: [0xf4200c00-0xf4200cff]
[ 0.980250] pci 0000:08:09.2: supports D1 D2
[ 0.980252] pci 0000:08:09.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.980257] pci 0000:08:09.2: PME# disabled
[ 0.980299] pci 0000:08:09.3: reg 10 32bit mmio: [0xf4201000-0xf42010ff]
[ 0.980349] pci 0000:08:09.3: supports D1 D2
[ 0.980351] pci 0000:08:09.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.980356] pci 0000:08:09.3: PME# disabled
[ 0.980398] pci 0000:08:09.4: reg 10 32bit mmio: [0xf4201400-0xf42014ff]
[ 0.980448] pci 0000:08:09.4: supports D1 D2
[ 0.980450] pci 0000:08:09.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.980455] pci 0000:08:09.4: PME# disabled
[ 0.980507] pci 0000:00:1e.0: transparent bridge
[ 0.980515] pci 0000:00:1e.0: bridge 32bit mmio: [0xf4200000-0xf42fffff]
[ 0.980559] bus 00 -> node 0
[ 0.980566] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.981007] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 0.981161] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.981305] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.981449] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.981592] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.981751] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.985457] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.985582] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.985704] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.985825] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.985946] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.986067] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.986188] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.986309] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.986679] ACPI: WMI: Mapper loaded
[ 0.986707] SCSI subsystem initialized
[ 0.986707] libata version 3.00 loaded.
[ 0.986707] usbcore: registered new interface driver usbfs
[ 0.986707] usbcore: registered new interface driver hub
[ 0.986707] usbcore: registered new device driver usb
[ 0.986707] PCI: Using ACPI for IRQ routing
[ 0.988013] Bluetooth: Core ver 2.13
[ 0.988017] NET: Registered protocol family 31
[ 0.988017] Bluetooth: HCI device and connection manager initialized
[ 0.988017] Bluetooth: HCI socket layer initialized
[ 0.988017] NET: Registered protocol family 8
[ 0.988019] NET: Registered protocol family 20
[ 0.988029] NetLabel: Initializing
[ 0.988031] NetLabel: domain hash size = 128
[ 0.988033] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.988046] NetLabel: unlabeled traffic allowed by default
[ 0.988061] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.988066] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.992064] AppArmor: AppArmor Filesystem Enabled
[ 0.996009] Switched to high resolution mode on CPU 0
[ 0.996655] Switched to high resolution mode on CPU 1
[ 0.996663] pnp: PnP ACPI init
[ 0.996672] ACPI: bus type pnp registered
[ 1.001872] pnp: PnP ACPI: found 10 devices
[ 1.001875] ACPI: ACPI bus type pnp unregistered
[ 1.001878] PnPBIOS: Disabled by ACPI PNP
[ 1.001886] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 1.001889] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 1.001892] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 1.001895] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 1.001897] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 1.001900] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 1.001902] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 1.001914] system 00:06: iomem range 0xfed00000-0xfed003ff has been reserved
[ 1.001920] system 00:08: ioport range 0x680-0x69f has been reserved
[ 1.001923] system 00:08: ioport range 0x800-0x80f has been reserved
[ 1.001925] system 00:08: ioport range 0x1000-0x107f has been reserved
[ 1.001928] system 00:08: ioport range 0x1180-0x11bf has been reserved
[ 1.001931] system 00:08: ioport range 0xfe00-0xfe00 has been reserved
[ 1.036639] pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff]
[ 1.036642] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 1.036645] pci 0000:00:01.0: IO window: 0x2000-0x2fff
[ 1.036649] pci 0000:00:01.0: MEM window: 0xcc000000-0xceffffff
[ 1.036652] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 1.036657] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 1.036660] pci 0000:00:1c.0: IO window: 0x3000-0x3fff
[ 1.036667] pci 0000:00:1c.0: MEM window: 0xf2000000-0xf3ffffff
[ 1.036672] pci 0000:00:1c.0: PREFETCH window: 0x000000f0000000-0x000000f1ffffff
[ 1.036680] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:05
[ 1.036684] pci 0000:00:1c.1: IO window: 0x4000-0x4fff
[ 1.036690] pci 0000:00:1c.1: MEM window: 0xf4000000-0xf40fffff
[ 1.036695] pci 0000:00:1c.1: PREFETCH window: disabled
[ 1.036703] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:06
[ 1.036705] pci 0000:00:1c.2: IO window: disabled
[ 1.036711] pci 0000:00:1c.2: MEM window: disabled
[ 1.036716] pci 0000:00:1c.2: PREFETCH window: disabled
[ 1.036724] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:07
[ 1.036726] pci 0000:00:1c.3: IO window: disabled
[ 1.036733] pci 0000:00:1c.3: MEM window: 0xf4100000-0xf41fffff
[ 1.036737] pci 0000:00:1c.3: PREFETCH window: disabled
[ 1.036746] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08
[ 1.036748] pci 0000:00:1e.0: IO window: disabled
[ 1.036754] pci 0000:00:1e.0: MEM window: 0xf4200000-0xf42fffff
[ 1.036759] pci 0000:00:1e.0: PREFETCH window: disabled
[ 1.036773] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.036777] pci 0000:00:01.0: setting latency timer to 64
[ 1.036787] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.036791] pci 0000:00:1c.0: setting latency timer to 64
[ 1.036800] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.036805] pci 0000:00:1c.1: setting latency timer to 64
[ 1.036815] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.036820] pci 0000:00:1c.2: setting latency timer to 64
[ 1.036830] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.036835] pci 0000:00:1c.3: setting latency timer to 64
[ 1.036843] pci 0000:00:1e.0: setting latency timer to 64
[ 1.036847] bus: 00 index 0 io port: [0x00-0xffff]
[ 1.036849] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 1.036851] bus: 01 index 0 io port: [0x2000-0x2fff]
[ 1.036854] bus: 01 index 1 mmio: [0xcc000000-0xceffffff]
[ 1.036856] bus: 01 index 2 mmio: [0xd0000000-0xdfffffff]
[ 1.036857] bus: 01 index 3 mmio: [0x0-0x0]
[ 1.036859] bus: 02 index 0 io port: [0x3000-0x3fff]
[ 1.036861] bus: 02 index 1 mmio: [0xf2000000-0xf3ffffff]
[ 1.036863] bus: 02 index 2 mmio: [0xf0000000-0xf1ffffff]
[ 1.036865] bus: 02 index 3 mmio: [0x0-0x0]
[ 1.036867] bus: 05 index 0 io port: [0x4000-0x4fff]
[ 1.036869] bus: 05 index 1 mmio: [0xf4000000-0xf40fffff]
[ 1.036871] bus: 05 index 2 mmio: [0x0-0x0]
[ 1.036872] bus: 05 index 3 mmio: [0x0-0x0]
[ 1.036874] bus: 06 index 0 mmio: [0x0-0x0]
[ 1.036876] bus: 06 index 1 mmio: [0x0-0x0]
[ 1.036877] bus: 06 index 2 mmio: [0x0-0x0]
[ 1.036879] bus: 06 index 3 mmio: [0x0-0x0]
[ 1.036881] bus: 07 index 0 mmio: [0x0-0x0]
[ 1.036883] bus: 07 index 1 mmio: [0xf4100000-0xf41fffff]
[ 1.036884] bus: 07 index 2 mmio: [0x0-0x0]
[ 1.036886] bus: 07 index 3 mmio: [0x0-0x0]
[ 1.036888] bus: 08 index 0 mmio: [0x0-0x0]
[ 1.036890] bus: 08 index 1 mmio: [0xf4200000-0xf42fffff]
[ 1.036892] bus: 08 index 2 mmio: [0x0-0x0]
[ 1.036894] bus: 08 index 3 io port: [0x00-0xffff]
[ 1.036896] bus: 08 index 4 mmio: [0x000000-0xffffffff]
[ 1.036903] NET: Registered protocol family 2
[ 1.049047] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 1.049274] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.049566] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.049715] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.049717] TCP reno registered
[ 1.053060] NET: Registered protocol family 1
[ 1.053169] checking if image is initramfs... it is
[ 1.653180] Freeing initrd memory: 7374k freed
[ 1.653217] Simple Boot Flag at 0x36 set to 0x1
[ 1.653383] cpufreq: No nForce2 chipset.
[ 1.653511] audit: initializing netlink socket (disabled)
[ 1.653529] type=2000 audit(1255436681.652:1): initialized
[ 1.660519] highmem bounce pool size: 64 pages
[ 1.660524] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.661807] VFS: Disk quotas dquot_6.5.1
[ 1.661867] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.662443] fuse init (API version 7.10)
[ 1.662524] msgmni has been set to 1698
[ 1.662692] alg: No test for stdrng (krng)
[ 1.662702] io scheduler noop registered
[ 1.662705] io scheduler anticipatory registered
[ 1.662707] io scheduler deadline registered
[ 1.662719] io scheduler cfq registered (default)
[ 1.662881] pci 0000:01:00.0: Boot video device
[ 1.677634] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 1.677672] pcieport-driver 0000:00:01.0: found MSI capability
[ 1.677696] pcieport-driver 0000:00:01.0: irq 2303 for MSI/MSI-X
[ 1.677706] pci_express 0000:00:01.0:pcie00: allocate port service
[ 1.677719] pci_express 0000:00:01.0:pcie02: allocate port service
[ 1.677731] pci_express 0000:00:01.0:pcie03: allocate port service
[ 1.677783] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 1.677835] pcieport-driver 0000:00:1c.0: found MSI capability
[ 1.677869] pcieport-driver 0000:00:1c.0: irq 2302 for MSI/MSI-X
[ 1.677886] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 1.677897] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 1.677909] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 1.677985] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 1.678037] pcieport-driver 0000:00:1c.1: found MSI capability
[ 1.678072] pcieport-driver 0000:00:1c.1: irq 2301 for MSI/MSI-X
[ 1.678090] pci_express 0000:00:1c.1:pcie00: allocate port service
[ 1.678102] pci_express 0000:00:1c.1:pcie02: allocate port service
[ 1.678113] pci_express 0000:00:1c.1:pcie03: allocate port service
[ 1.678192] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 1.678244] pcieport-driver 0000:00:1c.2: found MSI capability
[ 1.678279] pcieport-driver 0000:00:1c.2: irq 2300 for MSI/MSI-X
[ 1.678295] pci_express 0000:00:1c.2:pcie00: allocate port service
[ 1.678307] pci_express 0000:00:1c.2:pcie02: allocate port service
[ 1.678319] pci_express 0000:00:1c.2:pcie03: allocate port service
[ 1.678395] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[ 1.678447] pcieport-driver 0000:00:1c.3: found MSI capability
[ 1.678481] pcieport-driver 0000:00:1c.3: irq 2299 for MSI/MSI-X
[ 1.678498] pci_express 0000:00:1c.3:pcie00: allocate port service
[ 1.678510] pci_express 0000:00:1c.3:pcie02: allocate port service
[ 1.678521] pci_express 0000:00:1c.3:pcie03: allocate port service
[ 1.678607] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.680170] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.681883] ACPI: AC Adapter [ADP1] (on-line)
[ 1.803615] ACPI: Battery Slot [BAT0] (battery present)
[ 1.803692] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.803694] ACPI: Power Button (FF) [PWRF]
[ 1.803736] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 1.805375] ACPI: Lid Switch [LID0]
[ 1.805417] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 1.805423] ACPI: Sleep Button (CM) [SLPB]
[ 1.805989] ACPI: SSDT 7FED0930, 027A (r1 PmRef Cpu0Ist 3000 INTL 20061109)
[ 1.806398] ACPI: SSDT 7FED060D, 029E (r1 PmRef Cpu0Cst 3001 INTL 20061109)
[ 1.807078] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 1.807101] processor ACPI_CPU:00: registered as cooling_device0
[ 1.807432] ACPI: SSDT 7FED0BAA, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20061109)
[ 1.807814] ACPI: SSDT 7FED08AB, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20061109)
[ 1.808519] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 1.808537] processor ACPI_CPU:01: registered as cooling_device1
[ 1.828429] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.837467] ACPI: Thermal Zone [TZS0] (66 C)
[ 1.842223] thermal LNXTHERM:02: registered as thermal_zone1
[ 1.845263] ACPI: Thermal Zone [TZS1] (79 C)
[ 1.845316] isapnp: Scanning for PnP cards...
[ 2.199276] isapnp: No Plug & Play device found
[ 2.209221] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 2.210216] brd: module loaded
[ 2.210510] loop: module loaded
[ 2.210569] Fixed MDIO Bus: probed
[ 2.210574] PPP generic driver version 2.4.2
[ 2.210628] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 2.210655] Driver 'sd' needs updating - please use bus_type methods
[ 2.210665] Driver 'sr' needs updating - please use bus_type methods
[ 2.210702] ahci 0000:00:1f.2: version 3.0
[ 2.210717] ahci 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 2.210757] ahci 0000:00:1f.2: irq 2298 for MSI/MSI-X
[ 2.210826] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[ 2.210829] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
[ 2.210834] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.211060] scsi0 : ahci
[ 2.211133] scsi1 : ahci
[ 2.211189] scsi2 : ahci
[ 2.211282] ata1: SATA max UDMA/133 abar m2048@0xf4505000 port 0xf4505100 irq 2298
[ 2.211286] ata2: SATA max UDMA/133 abar m2048@0xf4505000 port 0xf4505180 irq 2298
[ 2.211289] ata3: SATA max UDMA/133 abar m2048@0xf4505000 port 0xf4505200 irq 2298
[ 2.528020] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.528571] ACPI Warning (nspredef-0852): \_SB_.PCI0.SATA.PRT0._GTF: Return type mismatch - found Integer, expected Buffer [20080926]
[ 2.528578] ata1.00: _GTF unexpected object type 0x1
[ 2.528582] ata1.00: ATA-7: WDC WD1600BEVS-60RST0, 04.01G04, max UDMA/100
[ 2.528585] ata1.00: 312581808 sectors, multi 16: LBA48
[ 2.529202] ata1.00: _GTF unexpected object type 0x1
[ 2.529227] ata1.00: configured for UDMA/100
[ 2.864016] ata2: SATA link down (SStatus 0 SControl 300)
[ 3.200017] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.216099] scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVS-6 04.0 PQ: 0 ANSI: 5
[ 3.216195] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 3.216210] sd 0:0:0:0: [sda] Write Protect is off
[ 3.216212] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.216237] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.216295] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 3.216309] sd 0:0:0:0: [sda] Write Protect is off
[ 3.216311] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.216334] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.216338] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 3.321708] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.321745] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.321792] ata_piix 0000:00:1f.1: version 2.12
[ 3.321798] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 3.321833] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 3.321899] scsi3 : ata_piix
[ 3.321953] scsi4 : ata_piix
[ 3.322567] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1830 irq 14
[ 3.322570] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1838 irq 15
[ 3.484421] ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-T20L, NC08, max MWDMA2
[ 3.500382] ata4.00: configured for MWDMA2
[ 3.670668] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20L NC08 PQ: 0 ANSI: 5
[ 3.681583] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.681586] Uniform CD-ROM driver Revision: 3.20
[ 3.681666] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 3.681702] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 3.682372] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.682391] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.682404] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 3.682408] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 3.682459] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 3.686370] ehci_hcd 0000:00:1a.7: debug port 1
[ 3.686377] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 3.686390] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf4505c00
[ 3.700008] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 3.700068] usb usb1: configuration #1 chosen from 1 choice
[ 3.700093] hub 1-0:1.0: USB hub found
[ 3.700101] hub 1-0:1.0: 4 ports detected
[ 3.700203] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.700214] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.700217] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.700259] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 3.704160] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.704167] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 3.704180] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf4506000
[ 3.716008] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.716071] usb usb2: configuration #1 chosen from 1 choice
[ 3.716095] hub 2-0:1.0: USB hub found
[ 3.716101] hub 2-0:1.0: 6 ports detected
[ 3.716193] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.716209] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.716227] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.716234] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3.716237] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 3.716279] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 3.716315] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001840
[ 3.716385] usb usb3: configuration #1 chosen from 1 choice
[ 3.716408] hub 3-0:1.0: USB hub found
[ 3.716415] hub 3-0:1.0: 2 ports detected
[ 3.716501] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 3.716507] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 3.716511] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 3.716553] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 3.716589] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001860
[ 3.716658] usb usb4: configuration #1 chosen from 1 choice
[ 3.716684] hub 4-0:1.0: USB hub found
[ 3.716690] hub 4-0:1.0: 2 ports detected
[ 3.716768] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.716774] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.716778] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.716817] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 3.716844] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
[ 3.716913] usb usb5: configuration #1 chosen from 1 choice
[ 3.716936] hub 5-0:1.0: USB hub found
[ 3.716942] hub 5-0:1.0: 2 ports detected
[ 3.717026] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.717032] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.717036] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.717076] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 3.717111] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0
[ 3.717184] usb usb6: configuration #1 chosen from 1 choice
[ 3.717207] hub 6-0:1.0: USB hub found
[ 3.717213] hub 6-0:1.0: 2 ports detected
[ 3.717299] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.717306] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.717309] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.717348] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 3.717376] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
[ 3.717444] usb usb7: configuration #1 chosen from 1 choice
[ 3.717470] hub 7-0:1.0: USB hub found
[ 3.717476] hub 7-0:1.0: 2 ports detected
[ 3.717592] usbcore: registered new interface driver libusual
[ 3.717623] usbcore: registered new interface driver usbserial
[ 3.717632] USB Serial support registered for generic
[ 3.717648] usbcore: registered new interface driver usbserial_generic
[ 3.717650] usbserial: USB Serial Driver core
[ 3.717696] PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 3.718008] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 3.718094] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.718099] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 3.718101] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 3.718104] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 3.718106] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 3.718257] mice: PS/2 mouse device common for all mice
[ 3.718426] rtc_cmos 00:09: RTC can wake from S4
[ 3.718456] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
[ 3.718488] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 3.718539] device-mapper: uevent: version 1.0.3
[ 3.718623] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@xxxxxxxxxx
[ 3.718678] device-mapper: multipath: version 1.0.5 loaded
[ 3.718680] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 3.718746] EISA: Probing bus 0 at eisa.0
[ 3.718752] Cannot allocate resource for EISA slot 1
[ 3.718755] Cannot allocate resource for EISA slot 2
[ 3.718757] Cannot allocate resource for EISA slot 3
[ 3.718759] Cannot allocate resource for EISA slot 4
[ 3.718778] EISA: Detected 0 cards.
[ 3.718880] cpuidle: using governor ladder
[ 3.718993] cpuidle: using governor menu
[ 3.719487] TCP cubic registered
[ 3.719579] NET: Registered protocol family 10
[ 3.719984] lo: Disabled Privacy Extensions
[ 3.720318] NET: Registered protocol family 17
[ 3.720334] Bluetooth: L2CAP ver 2.11
[ 3.720335] Bluetooth: L2CAP socket layer initialized
[ 3.720338] Bluetooth: SCO (Voice Link) ver 0.6
[ 3.720340] Bluetooth: SCO socket layer initialized
[ 3.720363] Marking TSC unstable due to TSC halts in idle
[ 3.720382] Bluetooth: RFCOMM socket layer initialized
[ 3.720390] Bluetooth: RFCOMM TTY layer initialized
[ 3.720391] Bluetooth: RFCOMM ver 1.10
[ 3.721135] Using IPI No-Shortcut mode
[ 3.721199] registered taskstats version 1
[ 3.721321] Magic number: 13:646:430
[ 3.721411] rtc_cmos 00:09: setting system clock to 2009-10-13 12:24:44 UTC (1255436684)
[ 3.721414] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.721416] EDD information not available.
[ 3.721689] Freeing unused kernel memory: 532k freed
[ 3.721850] Write protecting the kernel text: 4128k
[ 3.721915] Write protecting the kernel read-only data: 1532k
[ 3.722648] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 3.911718] sky2 driver version 1.22
[ 3.911763] sky2 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 3.911777] sky2 0000:05:00.0: setting latency timer to 64
[ 3.911815] sky2 0000:05:00.0: Yukon-2 FE chip revision 3
[ 3.975664] sky2 0000:05:00.0: Marvell Yukon 88E8039 Fast Ethernet Controller
[ 3.975666] Part Number: Yukon 88E8039
[ 3.975668] Engineering Level: Rev. 1.4
[ 3.975669] Manufacturer: Marvell
[ 3.975774] sky2 0000:05:00.0: irq 2297 for MSI/MSI-X
[ 3.980379] sky2 eth0: addr 00:16:d3:12:34:56
[ 4.119564] ohci1394 0000:08:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.172733] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[f4200000-f42007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 4.192027] usb 2-5: new high speed USB device using ehci_hcd and address 2
[ 4.405588] usb 2-5: configuration #1 chosen from 1 choice
[ 4.644092] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 4.806432] usb 4-1: configuration #1 chosen from 1 choice
[ 5.145758] PM: Starting manual resume from disk
[ 5.145762] PM: Resume from partition 8:7
[ 5.145763] PM: Checking hibernation image.
[ 5.145953] PM: Resume from disk failed.
[ 5.179811] kjournald starting. Commit interval 5 seconds
[ 5.179823] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.492226] ieee1394: Host added: ID:BUS[0-00:1023] GUID[07e40a0070115050]
[ 11.803172] udev: starting version 141
[ 12.020079] cfg80211: Calling CRDA to update world regulatory domain
[ 12.217855] cfg80211: World regulatory domain updated:
[ 12.217858] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.217860] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.217862] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.217864] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.217866] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.217868] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.384273] Linux agpgart interface v0.103
[ 12.979239] nvidia: module license 'NVIDIA' taints kernel.
[ 13.231945] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 13.231954] nvidia 0000:01:00.0: setting latency timer to 64
[ 13.232592] NVRM: loading NVIDIA UNIX x86 Kernel Module 180.51 Thu Apr 16 19:02:15 PDT 2009
[ 13.840373] iTCO_vendor_support: vendor-support=0
[ 13.878858] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 13.939681] sdhci: Secure Digital Host Controller Interface driver
[ 13.939684] sdhci: Copyright(c) Pierre Ossman
[ 13.948127] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 13.948129] ricoh-mmc: Copyright(c) Philip Langdale
[ 13.948159] ricoh-mmc: Ricoh MMC controller found at 0000:08:09.2 [1180:0843] (rev 12)
[ 13.948176] ricoh-mmc: Controller is now disabled.
[ 13.976437] acpi device:05: registered as cooling_device2
[ 13.976730] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/device:03/input/input6
[ 13.980750] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 13.997532] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 13.997675] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
[ 13.997749] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 14.036897] Linux video capture interface: v2.00
[ 14.042808] sdhci-pci 0000:08:09.1: SDHCI controller found [1180:0822] (rev 22)
[ 14.042825] sdhci-pci 0000:08:09.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 14.043855] sdhci-pci 0000:08:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 14.046693] mmc0: SDHCI controller on PCI [0000:08:09.1] using DMA
[ 14.119826] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 14.139173] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
[ 14.139176] iwl3945: Copyright(c) 2003-2008 Intel Corporation
[ 14.139240] iwl3945 0000:07:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 14.139254] iwl3945 0000:07:00.0: setting latency timer to 64
[ 14.139293] iwl3945: Detected Intel Wireless WiFi Link 3945ABG
[ 14.140096] iwl3945 0000:07:00.0: irq 2296 for MSI/MSI-X
[ 14.194566] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 14.195523] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 14.210344] uvcvideo: Found UVC 1.00 device HP Webcam (04f2:b016)
[ 14.211343] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input7
[ 14.213193] usbcore: registered new interface driver uvcvideo
[ 14.213232] USB Video Class driver (v0.1.0)
[ 14.382006] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 14.382116] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 14.500222] Clocksource tsc unstable (delta = -78204223 ns)
[ 14.577226] lp: driver loaded but no devices found
[ 14.669717] Adding 377488k swap on /dev/sda7. Priority:-1 extents:1 across:377488k
[ 14.703278] input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input8
[ 14.720293] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input9
[ 15.202713] EXT3 FS on sda6, internal journal
[ 16.301354] iwl3945: Radio Frequency Kill Switch is On:
[ 16.301355] Kill switch must be turned off for wireless networking to work.
[ 16.398291] type=1505 audit(1255424097.175:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2194
[ 16.438542] type=1505 audit(1255424097.215:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2198
[ 16.438616] type=1505 audit(1255424097.215:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2198
[ 16.438649] type=1505 audit(1255424097.215:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2198
[ 16.438681] type=1505 audit(1255424097.215:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2198
[ 16.469741] type=1505 audit(1255424097.246:7): operation="profile_load" name="/usr/bin/freshclam" name2="default" pid=2203
[ 16.586809] type=1505 audit(1255424097.362:8): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2207
[ 16.586933] type=1505 audit(1255424097.362:9): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2207
[ 16.610870] type=1505 audit(1255424097.386:10): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2211
[ 17.821667] /dev/vmmon[2545]: Module vmmon: registered with major=10 minor=165
[ 17.821706] /dev/vmmon[2545]: Initial HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
[ 17.821713] /dev/vmmon[2545]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0
[ 17.821715] /dev/vmmon[2545]: Module vmmon: initialized
[ 17.832435] /dev/vmci[2555]: VMCI: Driver initialized.
[ 17.832471] /dev/vmci[2555]: Module vmci: registered with major=10 minor=57
[ 17.832473] /dev/vmci[2555]: Module vmci: initialized
[ 17.898344] ppdev: user-space parallel port driver
[ 19.045128] /dev/vmnet: open called by PID 3128 (vmnet-dhcpd)
[ 19.045136] /dev/vmnet: hub 1 does not exist, allocating memory.
[ 19.045145] /dev/vmnet: port on hub 1 successfully opened
[ 19.073424] /dev/vmnet: open called by PID 3132 (vmnet-netifup)
[ 19.073432] /dev/vmnet: port on hub 1 successfully opened
[ 19.116056] /dev/vmnet: open called by PID 3138 (vmnet-dhcpd)
[ 19.116063] /dev/vmnet: hub 8 does not exist, allocating memory.
[ 19.116072] /dev/vmnet: port on hub 8 successfully opened
[ 19.191678] /dev/vmnet: open called by PID 3140 (vmnet-natd)
[ 19.191685] /dev/vmnet: port on hub 8 successfully opened
[ 19.202402] /dev/vmnet: open called by PID 3144 (vmnet-netifup)
[ 19.202410] /dev/vmnet: port on hub 8 successfully opened
[ 21.770287] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 21.770290] Bluetooth: BNEP filters: protocol multicast
[ 21.801123] Bridge firewalling registered
[ 28.226122] sky2 eth0: enabling interface
[ 28.226330] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 28.227021] iwl3945 0000:07:00.0: firmware: requesting iwlwifi-3945-1.ucode
[ 28.227127] /dev/vmnet: open called by PID 2611 (vmnet-bridge)
[ 28.227136] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 28.227146] /dev/vmnet: port on hub 0 successfully opened
[ 28.227160] bridge-eth0: up
[ 28.559734] iwl3945: Radio disabled by HW RF Kill switch
[ 28.561520] bridge-eth0: attached
[ 28.569357] bridge-eth0: disabling the bridge
[ 28.572451] bridge-eth0: down
[ 28.572507] bridge-eth0: detached
[ 29.317018] vmnet1: no IPv6 routers present
[ 29.508074] vmnet8: no IPv6 routers present
Module Size Used by
binfmt_misc 16776 1
bridge 56340 0
stp 10500 1 bridge
bnep 20224 2
vmnet 47812 10
ppdev 15620 0
parport_pc 40100 0
vmblock 20900 3
vmci 58324 0
vmmon 76912 0
input_polldev 11912 0
joydev 18368 0
lp 17156 0
parport 42220 3 ppdev,parport_pc,lp
snd_hda_intel 435636 2
snd_pcm_oss 46336 0
snd_mixer_oss 22656 1 snd_pcm_oss
snd_pcm 82948 2 snd_hda_intel,snd_pcm_oss
snd_seq_dummy 10756 0
snd_seq_oss 37760 0
snd_seq_midi 14336 0
snd_rawmidi 29696 1 snd_seq_midi
snd_seq_midi_event 15104 2 snd_seq_oss,snd_seq_midi
arc4 9856 2
ecb 10752 2
snd_seq 56880 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 29704 2 snd_pcm,snd_seq
snd_seq_device 14988 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
uvcvideo 63240 0
iwl3945 97912 0
snd 62628 13 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
compat_ioctl32 9344 1 uvcvideo
sdhci_pci 15232 0
videodev 41600 1 uvcvideo
psmouse 61972 0
mac80211 217208 1 iwl3945
iTCO_wdt 19108 0
soundcore 15200 1 snd
video 25360 6
intel_agp 34108 0
ricoh_mmc 11904 0
sdhci 23940 1 sdhci_pci
v4l1_compat 21764 2 uvcvideo,videodev
serio_raw 13316 0
pcspkr 10496 0
led_class 12036 1 iwl3945
iTCO_vendor_support 11652 1 iTCO_wdt
snd_page_alloc 16904 2 snd_hda_intel,snd_pcm
output 11008 1 video
nvidia 7236444 39
agpgart 42696 2 intel_agp,nvidia
cfg80211 38032 2 iwl3945,mac80211
ohci1394 38576 0
ieee1394 94660 1 ohci1394
sky2 54916 0
fbcon 46112 0
tileblit 10752 1 fbcon
font 16384 1 fbcon
bitblit 13824 1 fbcon
softcursor 9984 1 bitblit
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.28-11-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686,
Linux version 2.6.28-11-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009
scanModem update of: 2009_09_15
The dialer utility package WVDIAL does not appear to be installed on your System.
For Ubuntu Jaunty users, there are at the bottom of http://linmodems.technion.ac.il/packages/:
wvdial_jaunty_amd64.zip for x86_64, 64 bit bus systems.
wvdial_jaunty_i386.zip for 32 bit systems.
These are about 1 MB in size. After downloaded and copied into your Linux partition:
$ unzip wv*.zip
Within the new folder:
$ sudo dpkg -i *.deb
will complete the wvdial installation
Please read Modem/DOCs/wvdial.txt for usage information.
Presently install your Linux Distributions dkms package. It provides for automated driver updates,
following upgrade of your kernel. For details see http://linux.dell.com/projects.shtml#dkms
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
snd_hda_intel
Attached USB devices are:
ID 04f2:b016 Chicony Electronics Co., Ltd
ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is: http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx
For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1b.0 8086:284b 103c:30cd Audio device: Intel Corporation 82801H
Modem interrupt assignment and sharing:
22: 1281 1258 IO-APIC-fasteoi HDA Intel
--- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[ 0.977805] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf4500000-0xf4503fff]
[ 0.977850] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.977855] pci 0000:00:1b.0: PME# disabled
[ 14.382006] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 14.382116] HDA Intel 0000:00:1b.0: setting latency timer to 64
The PCI slot 00:1b.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.
The ALSA verion is 1.0.18
The modem cards detected by "aplay -l" are: None
The /proc/asound/pcm file reports:
-----------------------
00-00: CONEXANT Analog : CONEXANT Analog : playback 1 : capture 1
00-01: Conexant Digital : Conexant Digital : playback 1
about /proc/asound/cards:
------------------------
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xf4500000 irq 22
PCI slot 00:1b.0 has a High Definition Audio Card
The drivers are in the kernel modules tree at:
/lib/modules/2.6.28-11-generic/kernel/sound/pci/hda/snd-hda-intel.ko
UNEXPECTED HDA diagnostic outcome.
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 00:1b.0:
Modem chipset detected on
NAME="Audio device: Intel Corporation 82801H "
CLASS=0403
PCIDEV=8086:284b
SUBSYS=103c:30cd
IRQ=22
HDA=8086:284b
SOFT=8086:284b.HDA
IDENT=hsfmodem
Driver=hsfmodem-drivers
For candidate modem in: 00:1b.0
0403 Audio device: Intel Corporation 82801H
Primary device ID: 8086:284b
Subsystem PCI_id 103c:30cd
Softmodem codec or chipset from diagnostics:
from Archives:
Support type needed or chipset: hsfmodem
Writing DOCs/Intel.txt
For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt
From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
download hsfmodem-7.80.02.02full_k2.6.28_11_generic_ubuntu_i386.deb.zip
Under Linux unpack with:
$ unzip hsfmodem*.zip
Then install with:
$ sudo dpkg -i hsfmodem*.deb
Subsequently, the modem should be found with
$ sudo wvdialconf /etc/wvdial.conf
Edit in your personal information with:
$ sudo gedit /etc/wvdial.conf
and try dialing out with:
$ sudo wvdial.
See DOCs/Testing.txt for details.
The directions following below need only be pursued, if the above procedures are not adequate.
Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find the
hsfmodem package matching your System. For several Linux distros, there are
precompiled drivers matched to specific kernels. These have within the FileName,
your KernelVersion: 2.6.28_11_generic
They can be found through http://www.linuxant.com/drivers/hsf/full/downloads.php
A more precise location may be given a few paragraphs below.
If an EXACT Match with your your KernelVersion is not found, one of the
"Generic packages with source" near the bottom of the page must be used.
Downloaded packages must be moved into the Linux partition (home folder is OK)
and unzipped with:
unzip hsf*.zip
The installation command for a .deb suffic packages is, with root/adm permission:
sudo dpkg -i hsf*.deb
while for .rpm suffix it is, with:
rpm -i hsf*.rpm
Support for Conexant chips hosted on High Definition Audio cards may require
installation of additional packages, one of the alsa-driver-linuxant packages
on http://www.linuxant.com/alsa-driver/ At the same time download the
alsa-driver-1.0.17-1.patch , in case it prove to be later needed. During the
hsfmodem install, there will be a message if there is necessary installation of
alsa-driver-linuxant
The installation command for a .deb suffic packages is, with root/adm permission:
sudo dpkg -i hsf*.deb
while for .rpm suffix it is, with:
rpm -i hsf*.rpm
There may a message that "Dependencies" are not satisfied. In this case the Ubuntu/Debian packages to be installed are linux-libc-dev & libc6-dev. Package
names may be different for other Linuxes. If not on your install CD, these
packages can be searched for at http://packages.ubuntu.com. After download,
they can be coinstalled with:
sudo dpkg -i li*.deb
Again try the alsa-driver-linuxant
There may be a message that the patch must be applied. In this case get the
ftp://ftp.alsa-project.org/pub/driver/alsa-driver-1.0.17.tar.bz2
Under Linux, this package is unpacked with:
$ tar jxf alsa*.tar.bz2
Next the patch is applied with:
$ patch -p0 < alsa-driver-1.0.17-1.patch
See http://linmodems.technion.ac.il/bigarch/archive-eighth/msg00838.html
for details on compiling and installing replacement snd-hda-intel + its
dependent drivers.
After the installation is completed, rerun the hsfmodem installation.
Reboot and try to detect the modem with Root permission:
sudo wvdialconf /etc/wvdial.conf
Read DOCs/Conexant.txt
Writing DOCs/Conexant.txt
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.3.3
and the compiler used in kernel assembly: 4.3.3
The patch utility is needed and is needed for compiling ALSA drivers, and possibly others.
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.3
linuc_headers base folder /lib/modules/2.6.28-11-generic/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 vmnet1 vmnet8
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
