After down load from http://packages.ubuntu.com/intrepid/i386/libasound2/download http://packages.ubuntu.com/intrepid/i386/libasound2-dev/download both packages can be installed with: $ sudo dpkg -i libasound*.deb Thereafter, there should be success with: $ sudo slmodemd -c SPAIN --alsa hw:0,6 MarvS On Tue, Nov 3, 2009 at 10:37 AM, Alfredo M.H. <provisio@xxxxxxxxxx> wrote: > > Estimado Marv. > > Gracias una vez más por tu respuesta. He comprobado si tenía instalados los paquetes libasound2* y me faltaba sólo el libasound2-dev. > > Como veo que tú entiendes mucho mejor el español que yo el inglés, ¿podrías explicarme los pasos que tengo que seguir para instalar o compilar los drivers para poder usar el modem (como modem o como fax) en base a los datos acerca de mi PC que facilité en mi primer mensaje, por favor?. Descargué el paquete gcc4.3_alsa1.0.18.tar.gz pero no hice nada porque, como ya dije, cada archivo contenido en él dice muchas cosas y mi nivel de inglés no llega tan alto. > > Un saludo, > > Alfredo > > > >> Date: Tue, 3 Nov 2009 08:30:53 -0500 >> Subject: Re: FW: 0x10573055 chipset faxing through /dev/pts/N ports? WAS: Alfredo, Spain, kernel 2.6.28-16-generic >> From: marvin.stodolsky@xxxxxxxxx >> To: provisio@xxxxxxxxxx >> CC: ciornjeja@xxxxxxxxx; discuss@xxxxxxxxxxxxx >> >> Alfredo >> >> x86_64 motherboards are supported. >> However there must be installed some 32 bit libraries to support the >> 32 bit compiled slmodemd. >> Only a 32 bit slmodemd is available, because its code package has a >> pre-compiled 32 component, as provided orginially by Smartlink. >> >> The needed libraries to complement slmodemd are the 32 bit versions of >> libasound2 and libasound2-dev. >> If not already installed on your System by default, they can be >> searched for at http://packages.ubuntu.com >> >> MarvS >> >> >> >> On Tue, Nov 3, 2009 at 7:23 AM, Alfredo M.H. wrote: >>> >>> Hola de nuevo, Arturo. >>> >> >> Te escribo para decirte que no he instalado la versión de 32 bits > de Ubuntu. Todavía estoy estudiando si actualizarme a la versión 9.10, > pero, si lo hago, probablemente instale la versión de 64 bits otra vez > porque, como ya dije en otra ocasión, tengo otro portátil con Windows > XP y puedo usarlo para enviar fax mientras no sea más fácil hacerlo con > Ubuntu. >>> >>> De todas maneras, muchas gracias por > tu ayuda y perdona por el problema del texto del mensaje. La verdad es > que ya tengo seleccionado texto plano, pero no sé por qué, muchas veces > no funciona y tengo que re-enviarlo para que se pueda leer. >>> >>> Un saludo, >>> >>> Alfredo >>> >>> >>>>> Date: Tue=2C 3 Nov 2009 09:02:18 +0100 >>>>> Subject: Re: 0x10573055 chipset faxing through /dev/pts/N ports? WAS: Alf= >>>> redo=2C Spain=2C kernel 2.6.28-16-generic >>>>> From: ciornjeja@xxxxxxxxx >>>>> To: provisio@xxxxxxxxxx >>>>> CC: olivares14031@xxxxxxxxx=3B marvin.stodolsky@xxxxxxxxx=3B discuss@linm= >>>> odems.org >>>>>=20 >>>>> Ciao Alfredo >>>>> prima di tutto devo chiederti se hai cambiato la versione di Ubuntu. >>>>> Antonio ti ha scritto che nel file ModemData.txt si precisa che il tuo >>>>> sistema scansionato era a 64 bits mentre il driver contenuto nel file >>>>> SLMODEMD_gcc4.3_alsa1.0.18.tar.gz funziona SOLO su sistemi a 32 bits. >>>>>=20 >>>>> Se lo hai fatto=2C devi dirmi se hai eseguito la procedura indicata da >>>>> Antonio per installare o meglio dire compilare il driver. >>>>>=20 >>>>> Nota a parte ti chiedo se puoi di rispondermi in testo piano e non in >>>>> html perch=E8 le lettere accentate della lingua spagnola mi impediscono >>>>> di leggere bene le tue risposte. Grazie >>>>>=20 >>>>>=20 >>>>> 2009/11/2 Alfredo M.H. : >>>>>> >>>>>> Hola=2C Arturo. >>>>>> >>>>>> Antes de nada=2C muchas gracias por tu respuesta. Me ha sido mucho m=E1s= >>>> f=E1cil comprenderla debido a la ra=EDz com=FAn de nuestros idiomas. >>>>>> >>>>>> Conozco el programa efax-gtk=2C de hecho lo tengo instalado=2C pero me d= >>>> a error a la hora de acceder al modem=2C de ah=ED la raz=F3n de mi consulta= >>>> . Supongo que ser=E1 por lo que me comenta Marv de las funciones de audio q= >>>> ue son necesarias para el fax. >>>>>> >>>>>> =BFPodr=EDas decirme c=F3mo hiciste t=FA para conseguirlo? =BFTambi=E9n = >>>> tuviste que instalar o compilar los m=F3dulos que me comentaron? >>>>>> >>>>>> Un abrazo=2C y muchas gracias por tu ayuda=2C >>>>>> >>>>>> =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= >>>> =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= >>>> =A0=A0=A0 Alfredo >>>>>>> >>>>>>>> Date: Mon=3D2C 2 Nov 2009 17:38:45 +0100 >>>>>>>> Subject: Re: FW: 0x10573055 chipset faxing through /dev/pts/N ports? W= >>>> AS:=3D >>>>>>> Alfredo=3D2C Spain=3D2C kernel 2.6.28-16-generic >>>>>>>> From: ciornjeja@xxxxxxxxx >>>>>>>> To: provisio@xxxxxxxxxx >>>>>>>> CC: olivares14031@xxxxxxxxx=3D3B marvin.stodolsky@xxxxxxxxx=3D3B discu= >>>> ss@linm=3D >>>>>>> odems.org >>>>>>>>=3D20 >>>>>>>> Alfredo >>>>>>>> non conosco lo spagnolo e spero che tu capisca l'italiano. >>>>>>>> Con Ubuntu 9.04 =3DE8 possibile spedire fax usando il programma Efax-g= >>>> tk >>>>>>>> che si trova nei repositori di Ubuntu. La procedura =3DE8 semplice=3D2= >>>> C >>>>>>>> bisogna preparare il documento in formato PDF o postscript=3D2C ma io = >>>> non >>>>>>>> so spiegarlo in spagnolo. Ma prima di tutto devi installare il modulo >>>>>>>> che pilota il modem come indicato dallo scanmodem e scritto da >>>>>>>> Antonio. Io spedisco e ricevo fax con Ubuntu. >>>>>>>>=3D20 >>>>>>>> 2009/11/2 Alfredo M.H. : >>>>>>>>> >>>>>>>>> Marv=3D2C Antonio. >>>>>>>>> >>>>>>>>> =3DA0De nuevo=3D2C much=3DEDsimas gracias por vuestras r=3DE1pidas y = >>>> =3DFAtiles re=3D >>>>>>> spuestas. A ti=3D2C Antonio=3D2C gracias adem=3DE1s por hacer de int=3D= >>>> E9rprete=3D2C =3D >>>>>>> porque=3D2C como ya os dije=3D2C mi nivel de ingl=3DE9s deja much=3DEDs= >>>> imo que dese=3D >>>>>>> ar. >>>>>>>>> >>>>>>>>> =3DA0En fin=3D2C viendo que va a ser imposible (o muuuuy dif=3DEDcil = >>>> para m=3DED=3D >>>>>>> ) usar este modem como fax=3D2C tendr=3DE9 que seguir usando el de otro= >>>> port=3DE1=3D >>>>>>> til con Win XP (el m=3DEDo=3D2C que tiene una partici=3D3DF3n con Vista= >>>> que apena=3D >>>>>>> s uso por lo malo que es ese sistema operativo=3D2C no tiene servicios = >>>> para e=3D >>>>>>> nviar fax y tampoco tengo ning=3D3DFAn programa comercial para hacerlo)= >>>> . De m=3D >>>>>>> omento=3D2C estoy bastante contento con Ubuntu 9.04=3D2C aunque=3D2C vi= >>>> niendo del=3D >>>>>>> mundo Windows=3D2C se echa en falta un poco m=3DE1s de facilidad en alg= >>>> unas cu=3D >>>>>>> estiones y alguna que otra funcionalidad en los programas habituales=3D= >>>> 2C per=3D >>>>>>> o bueno=3D2C todo es ir investigando y aprendiendo. >>>>>>>>> >>>>>>>>> =3DA0Un saludo y muchas gracias >>>>>>>>> =3DA0=3DA0=3DA0=3DA0=3DA0=3DA0=3DA0=3DA0=3DA0=3DA0=3DA0=3DA0=3DA0=3DA= >>>> 0=3DA0=3DA0=3DA0=3DA0=3DA0=3DA0=3DA0=3DA0=3DA0=3DA0=3D >>>>>>> =3DA0=3DA0=3DA0=3DA0=3DA0=3DA0=3DA0=3DA0=3DA0=3DA0=3DA0=3DA0=3DA0=3DA0= >>>> =3DA0=3DA0=3DA0=3DA0=3DA0=3DA0=3DA0=3DA0=3DA0=3DA0 Al=3D >>>>>>> fredo >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>>> Marv dice que el modem no se usa generalmente para hacer FAX aunque= >>>> el >>>>>>>>>>> archivo SLMODEMD esta competente para hacer FAX. El problema es que >>>>>>>>>>> el modem usa un port verdadero /dev/pts/N con N siendo un numero y = >>>> no >>>>>>>>>>> tienen la capacidad para sonido que se requiere para FAX. >>>>>>>>>>>=3D3D20 >>>>>>>>>>> =3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3= >>>> D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D >>>>>>> =3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D= >>>> =3D3D >>>>>>>>>> =3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D= >>>> 3D=3D3D3D=3D3D3D >>>>>>>>>>>=3D3D20 >>>>>>>>>>> Alfredo >>>>>>>>>>>=3D3D20 >>>>>>>>>>> Re: solo quiero usar el modem para enviar faxes de manera ocasional= >>>> . >>>>>>>>>>> Concerning FAX=3D3D2C this can likely not be supported under Linux= >>>> =3D3D2C =3D >>>>>>> though >>>>>>>>>>> the slmodemd utility is itself FAX competent. >>>>>>>>>>> The problem is that the modem uses the a true port /dev/pts/N (some= >>>> nu=3D >>>>>>> m=3D3D >>>>>>>>>> ber) >>>>>>>>>>> Such /dev/pts/ ports do not yet have the capability for the SOUND >>>>>>>>>>> support needed for fax. >>>>>>>>>>>=3D3D20 >>>>>>>>>>> List if someone else has another experience concerning Faxing throu= >>>> gh >>>>>>>>>>> /dev/pts/ ports=3D3D2C please advise. >>>>>>>>>>>=3D3D20 >>>>>>>>>>> Saludos=3D3D2C >>>>>>>>>>>=3D3D20 >>>>>>>>>>> Antonio >>>>>>>>>>>=3D3D20 >>>>>>>>>>> On 11/2/09=3D3D2C Marvin Stodolsky =3DA0wrote: >>>>>>>>>>>> Alfredo >>>>>>>>>>>> >>>>>>>>>>>> Re: solo quiero usar el modem para enviar faxes de manera ocasiona= >>>> l. >>>>>>>>>>>> Concerning FAX=3D3D2C this can likely not be supported under Linux= >>>> =3D3D2C=3D >>>>>>> though >>>>>>>>>>>> the slmodemd utility is itself FAX competent. >>>>>>>>>>>> The problem is that the modem uses the a true port /dev/pts/N (som= >>>> e n=3D >>>>>>> um=3D3D >>>>>>>>>> ber) >>>>>>>>>>>> Such /dev/pts/ ports do not yet have the capability for the SOUND >>>>>>>>>>>> support needed for fax. >>>>>>>>>>>> >>>>>>>>>>>> List if someone else has another experience concerning Faxing thro= >>>> ugh >>>>>>>>>>>> /dev/pts/ ports=3D3D2C please advise. >>>>>>>>>>>> >>>>>>>>>>>> MarvS >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> On Mon=3D3D2C Nov 2=3D3D2C 2009 at 7:16 AM=3D3D2C Alfredo M.H. =3D= >>>> 3D >>>>>>>>>> wrote: >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> Gracias a todos por vuestras respuestas=3D3D2C y perdonad nuevame= >>>> nte p=3D >>>>>>> or mi=3D3D >>>>>>>>>> baja >>>>>>>>>>>>> comprensi=3D3DF3n del ingl=3D3DE9s. He bajado la versi=3D3DF3n de= >>>> SLMODEMD=3D >>>>>>> que me r=3D3D >>>>>>>>>> ecomienda >>>>>>>>>>>>> MarvS=3D3D2C pero ahora me encuentro con el mismo problema=3D3D2C= >>>> porque=3D >>>>>>> est=3D3DE1=3D3D >>>>>>>>>> repleto >>>>>>>>>>>>> de archivos en ingl=3D3DE9s y cada cual dice sus cosas y no s=3D3= >>>> DE9 a q=3D >>>>>>> u=3D3DE9 at=3D3D >>>>>>>>>> enerme. >>>>>>>>>>>>> >>>>>>>>>>>>> Si alguien fuera tan amable de explic=3D3DE1rmelo en espa=3D3DF1o= >>>> l y de =3D >>>>>>> manera >>>>>>>>>>>>> comprensible me ser=3D3DEDa de gran ayuda. Como dije en mi primer= >>>> mens=3D >>>>>>> aje=3D3D >>>>>>>>>> =3D3D2C solo >>>>>>>>>>>>> quiero usar el modem para enviar faxes de manera ocasional. >>>>>>>>>>>>> >>>>>>>>>>>>> Bueno=3D3D2C repito=3D3D2C muchas gracias a todos y disculpad mi = >>>> torpeza=3D >>>>>>> (soy n=3D3D >>>>>>>>>> uevo en >>>>>>>>>>>>> el mundo Linux y se nota) y mi poco nivel de ingl=3D3DE9s. Un sal= >>>> udo=3D >>>>>>> =3D3D2C >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> Alfredo >>>>>>>>>>>>> >>>>>>>>>>>>>> Date: Sun=3D3D2C 1 Nov 2009 18:36:52 -0500 >>>>>>>>>>>>>> Subject: Re: Alfredo=3D3D2C Spain=3D3D2C kernel 2.6.28-16-generi= >>>> c >>>>>>>>>>>>>> From: marvin.stodolsky@xxxxxxxxx >>>>>>>>>>>>>> To: olivares14031@xxxxxxxxx >>>>>>>>>>>>>> CC: provisio@xxxxxxxxxx=3D3D3B discuss@xxxxxxxxxxxxx >>>>>>>>>>>>>> >>>>>>>>>>>>>> Alfredo=3D3D2C >>>>>>>>>>>>>> >>>>>>>>>>>>>> Use the =3D3DA0SLMODEMD_gcc4.3_alsa1.0.18.tar.gz >>>>>>>>>>>>>> to match the ALSA version. >>>>>>>>>>>>>> >>>>>>>>>>>>>> I'll fix the bug in scanModem >>>>>>>>>>>>>> >>>>>>>>>>>>>> MarvS >>>>>>>>>>>>>> scanModem maintainer >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Sun=3D3D2C Nov 1=3D3D2C 2009 at 3:08 PM=3D3D2C Antonio Olivar= >>>> es >>>>>>>>>>>>>> =3DA0wrote: >>>>>>>>>>>>>>> Alfredo=3D3D2C >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> scanModem recommends that you get SLMODEMD.gcc4.3.tar.gz >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Predictive =3D3DA0diagnostics for card in bus 00:0f.0: >>>>>>>>>>>>>>> =3D3DA0 =3D3DA0 Modem chipset =3D3DA0detected on >>>>>>>>>>>>>>> =3D3DA0NAME=3D3D3D"Audio device: Silicon Integrated Systems [Si= >>>> S] Azal=3D >>>>>>> ia Audi=3D3D >>>>>>>>>> o >>>>>>>>>>>>>>> Controller" >>>>>>>>>>>>>>> =3D3DA0CLASS=3D3D3D0403 >>>>>>>>>>>>>>> =3D3DA0PCIDEV=3D3D3D1039:7502 >>>>>>>>>>>>>>> =3D3DA0SUBSYS=3D3D3D1043:1783 >>>>>>>>>>>>>>> =3D3DA0IRQ=3D3D3D18 >>>>>>>>>>>>>>> =3D3DA0HDA=3D3D3D1039:7502 >>>>>>>>>>>>>>> =3D3DA0SOFT=3D3D3D1039:7502.HDA >>>>>>>>>>>>>>> =3D3DA0HDAchipVendorID=3D3D3D1057 >>>>>>>>>>>>>>> =3D3DA0CHIP=3D3D3D0x10573055 >>>>>>>>>>>>>>> =3D3DA0IDENT=3D3D3Dslmodemd >>>>>>>>>>>>>>> =3D3DA0SLMODEMD_DEVICE=3D3D3Dhw:0=3D3D2C6 >>>>>>>>>>>>>>> =3D3DA0Driver=3D3D3Dsnd-hda-intel >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> =3D3DA0For candidate modem in: =3D3DA000:0f.0 >>>>>>>>>>>>>>> =3D3DA0 =3D3DA00403 Audio device: Silicon Integrated Systems [S= >>>> iS] Aza=3D >>>>>>> lia Aud=3D3D >>>>>>>>>> io >>>>>>>>>>>>>>> Controller >>>>>>>>>>>>>>> =3D3DA0 =3D3DA0 =3D3DA0 Primary device ID: =3D3DA01039:7502 >>>>>>>>>>>>>>> =3D3DA0 =3D3DA0 Subsystem PCI_id =3D3DA01043:1783 >>>>>>>>>>>>>>> =3D3DA0 =3D3DA0 Softmodem codec or chipset from diagnostics: 0x= >>>> 1057305=3D >>>>>>> 5 >>>>>>>>>>>>>>> =3D3DA0 =3D3DA0 =3D3DA0 =3D3DA0 =3D3DA0 =3D3DA0 =3D3DA0 =3D3DA0= >>>> =3D3DA0 =3D3DA0 =3D3DA0 =3D >>>>>>> =3D3DA0 =3D3DA0 =3D3DA0 =3D3DA0 =3D3DA0from =3D3D >>>>>>>>>> =3D3DA0 =3D3DA0Archives: >>>>>>>>>>>>>>> =3D3DA0 =3D3DA0 =3D3DA0 =3D3DA0 =3D3DA0 =3D3DA0 =3D3DA0 =3D3DA0= >>>> =3D3DA0 =3D3DA0 =3D3DA0 =3D >>>>>>> =3D3DA0 The HDA card softmode=3D3D >>>>>>>>>> m chip is 0x10573055 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> =3D3DA0Support type needed or chipset: =3D3DA0 =3D3DA0slmodemd = >>>> supportin=3D >>>>>>> g the >>>>>>>>>>>>>>> snd-hda-intel audio+modem driver >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> =3D3DA0An ALSA (Advanced Linux Sound Architecture) modem driver= >>>> : >>>>>>>>>>>>>>> =3D3DA0snd-hda-intel >>>>>>>>>>>>>>> =3D3DA0provides Low Level support enabling contact with the mod= >>>> em ha=3D >>>>>>> rdwar=3D3D >>>>>>>>>> e. >>>>>>>>>>>>>>> =3D3DA0For all BUT Conexant chip soft modems (using hsfmodem so= >>>> ftwar=3D >>>>>>> e) >>>>>>>>>>>>>>> =3D3DA0complementary High Level support is through a Smartlink = >>>> utili=3D >>>>>>> ty: >>>>>>>>>>>>>>> =3D3DA0slmodemd >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> =3D3DA0Download from http://linmodems.technion.ac.il/packages/s= >>>> martl=3D >>>>>>> ink/ >>>>>>>>>>>>>>> =3D3DA0the package SLMODEMD.gcc4.3.tar.gz having a compiled slm= >>>> odemd=3D >>>>>>> . >>>>>>>>>>>>>>> Unpack under Linux with: >>>>>>>>>>>>>>> =3D3DA0 =3D3DA0 =3D3DA0$ tar zxf SLMODEMD.gcc4.3.tar.gz >>>>>>>>>>>>>>> =3D3DA0and read instructions therein. But briefly=3D3D2C the mo= >>>> dem is =3D >>>>>>> setup w=3D3D >>>>>>>>>> ith >>>>>>>>>>>>>>> command: >>>>>>>>>>>>>>> =3D3DA0 =3D3DA0 =3D3DA0sudo slmodemd -c YOUR_COUNTRY --alsa hw:= >>>> 0=3D3D2C6 >>>>>>>>>>>>>>> =3D3DA0reporting dynamic creation of ports: >>>>>>>>>>>>>>> =3D3DA0 =3D3DA0 /dev/ttySL0 --> /dev/pts/N =3D3DA0 =3D3D2C with= >>>> N some num=3D >>>>>>> ber >>>>>>>>>>>>>>> =3D3DA0Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt fo= >>>> r fol=3D >>>>>>> low >>>>>>>>>>>>>>> through guidance. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> One problem is the Modem Interrupt Assignment=3D3D2C and wvdial= >>>> is n=3D >>>>>>> ot >>>>>>>>>>>>>>> installed: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> For candidate card in slot 00:0f.0=3D3D2C firmware information = >>>> and b=3D >>>>>>> ootup >>>>>>>>>>>>>>> diagnostics are: >>>>>>>>>>>>>>> =3D3DA0PCI slot =3D3DA0 =3D3DA0PCI ID =3D3DA0 =3D3DA0 =3D3DA0 = >>>> =3D3DA0SubsystemID=3D >>>>>>> =3D3DA0 =3D3DA0Name >>>>>>>>>>>>>>> =3D3DA0---------- =3D3DA0 =3D3DA0--------- =3D3DA0 =3D3DA0-----= >>>> ---- =3D3DA0 =3D >>>>>>> =3D3DA0-------------- >>>>>>>>>>>>>>> =3D3DA000:0f.0 =3D3DA0 =3D3DA01039:7502 =3D3DA0 =3D3DA01043:178= >>>> 3 =3D3DA0 =3D3DA0=3D >>>>>>> Audio device: Sil=3D3D >>>>>>>>>> icon >>>>>>>>>>>>>>> Integrated Systems [SiS] Azalia Audio Controller >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> =3D3DA0Modem interrupt assignment and sharing: >>>>>>>>>>>>>>> =3D3DA018: =3D3DA0 =3D3DA0 =3D3DA018017 =3D3DA0 =3D3DA0 =3D3DA0= >>>> =3D3DA0384 =3D3DA0 I=3D >>>>>>> O-APIC-fasteoi =3D3DA0 HD=3D3D >>>>>>>>>> A Intel >>>>>>>>>>>>>>> =3D3DA0--- Bootup diagnostics for card in PCI slot 00:0f.0 ---- >>>>>>>>>>>>>>> =3D3DA0[ =3D3DA0 =3D3DA00.521688] pci 0000:00:0f.0: reg 10 32bi= >>>> t mmio: >>>>>>>>>>>>>>> [0xfddf8000-0xfddfbfff] >>>>>>>>>>>>>>> =3D3DA0[ =3D3DA0 =3D3DA00.521724] pci 0000:00:0f.0: PME# suppor= >>>> ted from =3D >>>>>>> D0 D3hot =3D3D >>>>>>>>>> D3cold >>>>>>>>>>>>>>> =3D3DA0[ =3D3DA0 =3D3DA00.521728] pci 0000:00:0f.0: PME# disabl= >>>> ed >>>>>>>>>>>>>>> =3D3DA0[ =3D3DA0 11.242765] HDA Intel 0000:00:0f.0: PCI INT A -= >>>>> GSI 1=3D >>>>>>> 8 (leve=3D3D >>>>>>>>>> l=3D3D2C >>>>>>>>>>>>>>> low) -> IRQ 18 >>>>>>>>>>>>>>> =3D3DA0[ =3D3DA0 11.242865] HDA Intel 0000:00:0f.0: setting lat= >>>> ency ti=3D >>>>>>> mer to =3D3D >>>>>>>>>> 64 >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> =3D3DA0The PCI slot 00:0f.0 of the modem card may be disabled e= >>>> arly =3D >>>>>>> in >>>>>>>>>>>>>>> =3D3DA0a bootup process=3D3D2C =3D3DA0but then enabled later. I= >>>> f modem d=3D >>>>>>> rivers lo=3D3D >>>>>>>>>> ad >>>>>>>>>>>>>>> =3D3DA0but the =3D3DA0modem is not responsive=3D3D2C read DOCs/= >>>> Bootup.tx=3D >>>>>>> t about p=3D3D >>>>>>>>>> ossible >>>>>>>>>>>>>>> fixes. >>>>>>>>>>>>>>> =3D3DA0Send dmesg.txt along with ModemData.txt to discuss@linmo= >>>> dems.=3D >>>>>>> org >>>>>>>>>>>>>>> =3D3DA0if help is needed. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> The dialer utility package WVDIAL does not appear to be install= >>>> ed =3D >>>>>>> on >>>>>>>>>>>>>>> your System. >>>>>>>>>>>>>>> =3D3DA0For Ubuntu Jaunty users=3D3D2C there are at the bottom o= >>>> f >>>>>>>>>>>>>>> http://linmodems.technion.ac.il/packages/: >>>>>>>>>>>>>>> =3D3DA0 =3D3DA0 =3D3DA0wvdial_jaunty_amd64.zip =3D3DA0 for x86_= >>>> 64=3D3D2C 64 =3D >>>>>>> bit bus syste=3D3D >>>>>>>>>> ms. >>>>>>>>>>>>>>> =3D3DA0 =3D3DA0 =3D3DA0wvdial_jaunty_i386.zip =3D3DA0 =3D3DA0fo= >>>> r 32 bit syst=3D >>>>>>> ems. >>>>>>>>>>>>>>> =3D3DA0These are about 1 MB in size. =3D3DA0After downloaded an= >>>> d copie=3D >>>>>>> d into =3D3D >>>>>>>>>> your >>>>>>>>>>>>>>> Linux partition: >>>>>>>>>>>>>>> =3D3DA0$ unzip wv*.zip >>>>>>>>>>>>>>> =3D3DA0Within the new folder: >>>>>>>>>>>>>>> =3D3DA0$ sudo dpkg -i *.deb >>>>>>>>>>>>>>> =3D3DA0will =3D3DA0complete the wvdial installation >>>>>>>>>>>>>>> =3D3DA0Please read Modem/DOCs/wvdial.txt for usage information. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> There is however=3D3D2C a problem=3D3D2C since your system is x= >>>> 86_64 b=3D >>>>>>> it and >>>>>>>>>>>>>>> SLMODEMD only works in 32 bit. If you reinstall Ubuntu=3D3D2C t= >>>> ry >>>>>>>>>>>>>>> reinstalling 32 bit to make the modem functional. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Alfredo=3D3D2C >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> scanModem recommienda SLMODEMD.gcc.4.3.tar.gz=3D3D2C pero tu si= >>>> stema=3D >>>>>>> es 6=3D3D >>>>>>>>>> 4 >>>>>>>>>>>>>>> bits y SLMODEMD es solamente para 32 bits. =3D3DA0El modem si p= >>>> uede >>>>>>>>>>>>>>> funcionar pero solo en 32 bits. =3D3DA0Tambien no tienes el arc= >>>> hivo =3D >>>>>>> WVDIA=3D3D >>>>>>>>>> L >>>>>>>>>>>>>>> installado. =3D3DA0Si reinstalas Ubuntu=3D3D2C instala la versi= >>>> on de 3=3D >>>>>>> 2 bits =3D3D >>>>>>>>>> para >>>>>>>>>>>>>>> poder usar el modem. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Saludos=3D3D2C >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Antonio >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> On 11/1/09=3D3D2C Alfredo M.H. =3DA0wrote: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> =3D3DA0 =3D3DA0 =3D3DA0 >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Hello=3D3D2C everybody. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Before I pass to expose my problem=3D3D2C I'd >>>>>>>>>>>>>>>> like apologize for my level of English. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> I have an Asus notebook with this >>>>>>>>>>>>>>>> features: Intel Core 2 Duo CPU (T5800)=3D3D2C 4 Gb. RAM=3D3D2C= >>>> 15.4=3D >>>>>>> =3D3D94 WXGA=3D3D >>>>>>>>>> =3D3D2C 320 >>>>>>>>>>>>>>>> Gb. HDD=3D3D2C DVD Sup. MTI=3D3D2C Graphic Card ATI Mobility R= >>>> adeon H=3D >>>>>>> D 3470 =3D3D >>>>>>>>>> (VRAM >>>>>>>>>>>>>>>> 256 Mb.)=3D3D2C 802.11 b/g (Atheros AR928X) and -according to = >>>> Vista=3D >>>>>>> - a >>>>>>>>>>>>>>>> Motorola SM56 Speakerphone modem/fax. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> I use Ubuntu 9.04=3D3D2C and I'd like to use >>>>>>>>>>>>>>>> the modem to send faxes=3D3D2C but it seems that Ubuntu don't = >>>> detec=3D >>>>>>> t it.=3D3D >>>>>>>>>> I >>>>>>>>>>>>>>>> ran the scanModem tool but=3D3D2C due to my bad English unders= >>>> tandi=3D >>>>>>> ng=3D3D2C=3D3D >>>>>>>>>> I >>>>>>>>>>>>>>>> don't know what to do. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> I'd like someone help me (if possible=3D3D2C >>>>>>>>>>>>>>>> in Spanish=3D3D2C please) to I can using the modem-fax. Here a= >>>> re th=3D >>>>>>> e >>>>>>>>>>>>>>>> content of ModemData.txt: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> =3D3DA0Only plain text email is forwarded by the=3D3DA0 Discus= >>>> s@Linmo=3D >>>>>>> dems.or=3D3D >>>>>>>>>> g List >>>>>>>>>>>>>>>> Server=3D3D2C >>>>>>>>>>>>>>>> =3D3DA0as HTML can contain viruses. Use as the email Subject L= >>>> ine: >>>>>>>>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA= >>>> 0=3D3DA0 YourName=3D3D2C =3D >>>>>>> YourCountry=3D3DA0 kernel 2.6=3D3D >>>>>>>>>> .28-16-generic >>>>>>>>>>>>>>>> =3D3DA0With this Subject Line cogent experts will be alerted= >>>> =3D3D2C a=3D >>>>>>> nd usef=3D3D >>>>>>>>>> ul case >>>>>>>>>>>>>>>> names left in the Archive. >>>>>>>>>>>>>>>> =3D3DA0YourCountry will enable Country specific guidance. Linu= >>>> x exp=3D >>>>>>> erts =3D3D >>>>>>>>>> in >>>>>>>>>>>>>>>> YourCountry >>>>>>>>>>>>>>>> =3D3DA0can be found through: http://www.linux.org/groups/index= >>>> .html=3D >>>>>>> . >>>>>>>>>>>>>>>> They will know your Country's modem code=3D3D2C which may be e= >>>> ssent=3D >>>>>>> ial f=3D3D >>>>>>>>>> or >>>>>>>>>>>>>>>> dialup >>>>>>>>>>>>>>>> service. >>>>>>>>>>>>>>>> Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by = >>>> an >>>>>>>>>>>>>>>> Internet >>>>>>>>>>>>>>>> Provider mail filters. >>>>>>>>>>>>>>>> =3D3DA0So in a day=3D3D2C also check the Archived responses at >>>>>>>>>>>>>>>> http://www.linmodems.org >>>>>>>>>>>>>>>> --------------------------=3D3DA0 System information >>>>>>>>>>>>>>>> ---------------------------- >>>>>>>>>>>>>>>> CPU=3D3D3Dx86_64=3D3D2C >>>>>>>>>>>>>>>> Linux version 2.6.28-16-generic (buildd@crested) (gcc version = >>>> 4.3=3D >>>>>>> .3 >>>>>>>>>>>>>>>> (Ubuntu >>>>>>>>>>>>>>>> 4.3.3-5ubuntu4) ) #55-Ubuntu SMP Tue Oct 20 19:48:32 UTC 2009 >>>>>>>>>>>>>>>> =3D3DA0scanModem update of:=3D3DA0 2009_09_15 >>>>>>>>>>>>>>>> The modem symbolic link is /dev/modem -> ttySL0 >>>>>>>>>>>>>>>> The slmodemd set symbolic link is /dev/ttySL0 -> /dev/pts/0 >>>>>>>>>>>>>>>> The dialer utility package WVDIAL does not appear to be instal= >>>> led=3D >>>>>>> on >>>>>>>>>>>>>>>> your >>>>>>>>>>>>>>>> System. >>>>>>>>>>>>>>>> For Ubuntu Jaunty users=3D3D2C there are at the bottom of >>>>>>>>>>>>>>>> http://linmodems.technion.ac.il/packages/: >>>>>>>>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0 wvdial_jaunty_amd64.zip=3D3DA0=3D= >>>> 3DA0 for x86_64=3D >>>>>>> =3D3D2C 64 bit bus =3D3D >>>>>>>>>> systems. >>>>>>>>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0 wvdial_jaunty_i386.zip=3D3DA0=3D3= >>>> DA0=3D3DA0 for 32=3D >>>>>>> bit systems. >>>>>>>>>>>>>>>> These are about 1 MB in size.=3D3DA0 After downloaded and copi= >>>> ed in=3D >>>>>>> to yo=3D3D >>>>>>>>>> ur >>>>>>>>>>>>>>>> Linux >>>>>>>>>>>>>>>> partition: >>>>>>>>>>>>>>>> $ unzip wv*.zip >>>>>>>>>>>>>>>> Within the new folder: >>>>>>>>>>>>>>>> $ sudo dpkg -i *.deb >>>>>>>>>>>>>>>> will=3D3DA0 complete the wvdial installation >>>>>>>>>>>>>>>> Please read Modem/DOCs/wvdial.txt for usage information. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> The dkms driver upgrade utilities are installed=3D3D2C >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Some modem drivers can only be used in 32 bit modem on x86_64 = >>>> sys=3D >>>>>>> tem=3D3D >>>>>>>>>> s=3D3D2C >>>>>>>>>>>>>>>> while some others are competent on x86_64 Systems.=3D3DA0 Case= >>>> s are=3D >>>>>>> : >>>>>>>>>>>>>>>> 1) >>>>>>>>>>>>>>>> http://linmodems.technion.ac.il/bigarch/archive-seventh/msg031= >>>> 19.=3D >>>>>>> htm=3D3D >>>>>>>>>> l >>>>>>>>>>>>>>>> for the snd-hda-intel audio+modem driver. Also applicable to A= >>>> C97=3D >>>>>>> mo=3D3D >>>>>>>>>> dem >>>>>>>>>>>>>>>> controllers. >>>>>>>>>>>>>>>> In both cases=3D3D2C 32 bit libraries must be installed to sup= >>>> port =3D >>>>>>> the >>>>>>>>>>>>>>>> slmodemd >>>>>>>>>>>>>>>> helper having a precompiled 32 bit component. >>>>>>>>>>>>>>>> 2) For USB modems using the slusb.ko driver. 32 bit libraries = >>>> mus=3D >>>>>>> t b=3D3D >>>>>>>>>> e >>>>>>>>>>>>>>>> installed to support the slmodemd helper having a precompiled = >>>> 32 =3D >>>>>>> bit >>>>>>>>>>>>>>>> component >>>>>>>>>>>>>>>> 3) The hsfmodem and hcfpcimodem drivers for Conexant chipsest = >>>> mod=3D >>>>>>> es =3D3D >>>>>>>>>> are >>>>>>>>>>>>>>>> x86_64 competent. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> =3D3DA0There are no blacklisted modem drivers in /etc/modprobe= >>>> *=3D3DA=3D >>>>>>> 0 files >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> =3D3DA0Potentially useful modem drivers now loaded are: >>>>>>>>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0 snd_h= >>>> da_intel >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Attached USB devices are: >>>>>>>>>>>>>>>> =3D3DA0ID 0bda:0116 Realtek Semiconductor Corp. Mass Storage D= >>>> evice >>>>>>>>>>>>>>>> =3D3DA0ID 04f2:b012 Chicony Electronics Co.=3D3D2C Ltd 1.3 MPi= >>>> xel UVC=3D >>>>>>> webcam >>>>>>>>>>>>>>>> =3D3DA0ID 03f0:0604 Hewlett-Packard DeskJet 840c >>>>>>>>>>>>>>>> =3D3DA0ID 1241:1177 Belkin F8E842-DL Mouse >>>>>>>>>>>>>>>> If a cellphone is not detected=3D3D2C see >>>>>>>>>>>>>>>> http://ubuntuforums.org/archive/index.php/t-878554.html >>>>>>>>>>>>>>>> A sample report is: >>>>>>>>>>>>>>>> http://linmodems.technion.ac.il/bigarch/archive-nineth/msg0057= >>>> 8.h=3D >>>>>>> tml >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> If a USB modem or cellphone is attached and was not detected= >>>> =3D3D2C=3D >>>>>>> plea=3D3D >>>>>>>>>> se >>>>>>>>>>>>>>>> provide available information in your request to discuss@linmo= >>>> dem=3D >>>>>>> s.o=3D3D >>>>>>>>>> rg >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> For candidate card in slot 00:0f.0=3D3D2C firmware information= >>>> and =3D >>>>>>> bootu=3D3D >>>>>>>>>> p >>>>>>>>>>>>>>>> diagnostics are: >>>>>>>>>>>>>>>> =3D3DA0PCI slot=3D3DA0=3D3DA0=3D3DA0 PCI ID=3D3DA0=3D3DA0=3D3D= >>>> A0 =3D3DA0=3D3DA0=3D3DA=3D >>>>>>> 0 SubsystemID=3D3DA0=3D3DA0=3D3DA0 =3D3D >>>>>>>>>> Name >>>>>>>>>>>>>>>> =3D3DA0----------=3D3DA0=3D3DA0=3D3DA0 ---------=3D3DA0=3D3DA0= >>>> =3D3DA0 ---------=3D >>>>>>> =3D3DA0=3D3DA0=3D3DA0 -------=3D3D >>>>>>>>>> ------- >>>>>>>>>>>>>>>> =3D3DA000:0f.0=3D3DA0=3D3DA0=3D3DA0 1039:7502=3D3DA0=3D3DA0=3D= >>>> 3DA0 1043:1783=3D3D=3D >>>>>>> A0=3D3DA0=3D3DA0 Audio devi=3D3D >>>>>>>>>> ce: Silicon Integrated >>>>>>>>>>>>>>>> Systems [SiS] Azalia Audio Controller >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> =3D3DA0Modem interrupt assignment and sharing: >>>>>>>>>>>>>>>> =3D3DA018:=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0 18017=3D3DA0=3D3= >>>> DA0=3D3DA0=3D3DA0=3D3DA0=3D >>>>>>> =3D3DA0=3D3DA0 384=3D3DA0=3D3DA0 IO-APIC-f=3D3D >>>>>>>>>> asteoi=3D3DA0=3D3DA0 HDA Intel >>>>>>>>>>>>>>>> =3D3DA0--- Bootup diagnostics for card in PCI slot 00:0f.0 ---= >>>> - >>>>>>>>>>>>>>>> [=3D3DA0=3D3DA0=3D3DA0 0.521688] pci 0000:00:0f.0: reg 10 32bi= >>>> t mmio: >>>>>>>>>>>>>>>> [0xfddf8000-0xfddfbfff] >>>>>>>>>>>>>>>> [=3D3DA0=3D3DA0=3D3DA0 0.521724] pci 0000:00:0f.0: PME# suppor= >>>> ted from =3D >>>>>>> D0 D3hot =3D3D >>>>>>>>>> D3cold >>>>>>>>>>>>>>>> [=3D3DA0=3D3DA0=3D3DA0 0.521728] pci 0000:00:0f.0: PME# disabl= >>>> ed >>>>>>>>>>>>>>>> [=3D3DA0=3D3DA0 11.242765] HDA Intel 0000:00:0f.0: PCI INT A -= >>>>> GSI 1=3D >>>>>>> 8 (leve=3D3D >>>>>>>>>> l=3D3D2C low) >>>>>>>>>>>>>>>> -> >>>>>>>>>>>>>>>> IRQ 18 >>>>>>>>>>>>>>>> [=3D3DA0=3D3DA0 11.242865] HDA Intel 0000:00:0f.0: setting lat= >>>> ency ti=3D >>>>>>> mer to =3D3D >>>>>>>>>> 64 >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> =3D3DA0The PCI slot 00:0f.0 of the modem card may be disabled = >>>> early=3D >>>>>>> in >>>>>>>>>>>>>>>> =3D3DA0a bootup process=3D3D2C=3D3DA0 but then enabled later. = >>>> If modem =3D >>>>>>> drivers l=3D3D >>>>>>>>>> oad >>>>>>>>>>>>>>>> =3D3DA0but the=3D3DA0 modem is not responsive=3D3D2C read DOCs= >>>> /Bootup.t=3D >>>>>>> xt about =3D3D >>>>>>>>>> possible >>>>>>>>>>>>>>>> fixes. >>>>>>>>>>>>>>>> =3D3DA0Send dmesg.txt along with ModemData.txt to discuss@linm= >>>> odems=3D >>>>>>> .org >>>>>>>>>>>>>>>> =3D3DA0if help is needed. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> =3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D Advanced Linux Sound Archi= >>>> tecture (ALSA=3D >>>>>>> ) diagnostics=3D3D >>>>>>>>>> =3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D >>>>>>>>>>>>>>>> The ALSA packages provide audio support and also drivers for s= >>>> ome >>>>>>>>>>>>>>>> modems. >>>>>>>>>>>>>>>> ALSA diagnostics are written during bootup to /proc/asound/ fo= >>>> lde=3D >>>>>>> rs. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> The ALSA verion is 1.0.18 >>>>>>>>>>>>>>>> The modem cards detected by "aplay -l"=3D3DA0 are: >>>>>>>>>>>>>>>> tarjeta 0: SIS966 [HDA SIS966]=3D3D2C dispositivo 6: Si3054 Mo= >>>> dem [=3D >>>>>>> Si305=3D3D >>>>>>>>>> 4 >>>>>>>>>>>>>>>> Modem] >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> The /proc/asound/pcm file reports: >>>>>>>>>>>>>>>> ----------------------- >>>>>>>>>>>>>>>> 00-00: ALC660-VD Analog : ALC660-VD Analog : playback 1 : capt= >>>> ure=3D >>>>>>> 1 >>>>>>>>>>>>>>>> 00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1 >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> about /proc/asound/cards: >>>>>>>>>>>>>>>> ------------------------ >>>>>>>>>>>>>>>> =3D3DA00 [SIS966=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3= >>>> DA0=3D3DA0 ]: HDA-Int=3D >>>>>>> el - HDA SIS966 >>>>>>>>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA= >>>> 0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D >>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0 HDA =3D3D >>>>>>>>>> SIS966 at 0xfddf8000 irq 18 >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> =3D3DA0PCI slot 00:0f.0 has a High Definition Audio Card >>>>>>>>>>>>>>>> =3D3DA0The drivers are in the kernel modules tree at: >>>>>>>>>>>>>>>> =3D3DA0/lib/modules/2.6.28-16-generic/kernel/sound/pci/hda/snd= >>>> -hda-=3D >>>>>>> intel=3D3D >>>>>>>>>> .ko >>>>>>>>>>>>>>>> /lib/modules/2.6.28-15-generic/kernel/sound/pci/hda/snd-hda-in= >>>> tel=3D >>>>>>> .ko >>>>>>>>>>>>>>>> =3D3DA0The modem codec file for the HDA card is: /proc/asound/= >>>> card0=3D >>>>>>> /code=3D3D >>>>>>>>>> c#1 >>>>>>>>>>>>>>>> -------------------------------------------------------- >>>>>>>>>>>>>>>> Codec: Motorola Si3054 >>>>>>>>>>>>>>>> Address: 1 >>>>>>>>>>>>>>>> Vendor Id: 0x10573055 >>>>>>>>>>>>>>>> Subsystem Id: 0x10431316 >>>>>>>>>>>>>>>> Revision Id: 0x100700 >>>>>>>>>>>>>>>> Modem Function Group: 0x1 >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> =3D3DA0The audio card hosts a softmodem chip:=3D3DA0 0x1057305= >>>> 5 >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> The softmodem chip 0x10573055 is in principle supported by the= >>>> CO=3D >>>>>>> MM >>>>>>>>>>>>>>>> support >>>>>>>>>>>>>>>> of slmodemd >>>>>>>>>>>>>>>> and the joint snd-hda-intel audio+modem driver=3D3D2C begun wi= >>>> th AL=3D >>>>>>> SA ve=3D3D >>>>>>>>>> rsion >>>>>>>>>>>>>>>> 1.0.13. >>>>>>>>>>>>>>>> For HDA cards with ALC883 chips=3D3D2C an upgrade to ALSA veri= >>>> ons 1=3D >>>>>>> .0.15=3D3D >>>>>>>>>> way >>>>>>>>>>>>>>>> be >>>>>>>>>>>>>>>> necessary. Instructions for Upgrading snd-hda-intel and its de= >>>> pen=3D >>>>>>> den=3D3D >>>>>>>>>> t >>>>>>>>>>>>>>>> driver >>>>>>>>>>>>>>>> set are at: >>>>>>>>>>>>>>>> http://linmodems.technion.ac.il/bigarch/archive-eighth/msg0083= >>>> 8.h=3D >>>>>>> tml >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> If not a Conexant modem=3D3D2C the driver snd-hda-intel with i= >>>> ts de=3D >>>>>>> pende=3D3D >>>>>>>>>> nt >>>>>>>>>>>>>>>> drivers: >>>>>>>>>>>>>>>> snd_hda_intel=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0= >>>> =3D3DA0 559028=3D3DA0=3D >>>>>>> 6 >>>>>>>>>>>>>>>> snd_pcm=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA= >>>> 0=3D3DA0=3D3DA0=3D3DA0=3D3D=3D >>>>>>> A0=3D3DA0=3D3DA0=3D3DA0 99464=3D3DA0 4 snd_=3D3D >>>>>>>>>> hda_intel=3D3D2Csnd_pcm_oss >>>>>>>>>>>>>>>> snd=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D= >>>> 3DA0=3D3DA0=3D3DA0=3D3DA0=3D >>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0 78920=3D3D >>>>>>>>>> =3D3DA0 19 >>>>>>>>>>>>>>>> snd_hda_intel=3D3D2Csnd_pcm_oss=3D3D2Csnd_mixer_oss=3D3D2Csnd_= >>>> pcm=3D3D2Cs=3D >>>>>>> nd_seq_oss=3D3D >>>>>>>>>> =3D3D2Csnd_rawmidi=3D3D2Csnd_seq=3D3D2Csnd_timer=3D3D2Csnd_seq_devic= >>>> e >>>>>>>>>>>>>>>> snd_page_alloc=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA= >>>> 0=3D3DA0 18704=3D3DA0=3D >>>>>>> 2 snd_hda_intel=3D3D2Csn=3D3D >>>>>>>>>> d_pcm >>>>>>>>>>>>>>>> ---------- >>>>>>>>>>>>>>>> provide audio + modem support with the modem chip residing on = >>>> the >>>>>>>>>>>>>>>> subsystem. >>>>>>>>>>>>>>>> Any particular card can host any one of several soft modem chi= >>>> ps. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> =3D3D3D=3D3D3D=3D3D3D Finished firmware and bootup diagnostics= >>>> =3D3D2C nex=3D >>>>>>> t deducing =3D3D >>>>>>>>>> cogent >>>>>>>>>>>>>>>> software. >>>>>>>>>>>>>>>> =3D3D3D=3D3D3D=3D3D3D >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Predictive=3D3DA0 diagnostics for card in bus 00:0f.0: >>>>>>>>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0 Modem chipset=3D3DA0 detected on >>>>>>>>>>>>>>>> NAME=3D3D3D"Audio device: Silicon Integrated Systems [SiS] Aza= >>>> lia A=3D >>>>>>> udio >>>>>>>>>>>>>>>> Controller" >>>>>>>>>>>>>>>> CLASS=3D3D3D0403 >>>>>>>>>>>>>>>> PCIDEV=3D3D3D1039:7502 >>>>>>>>>>>>>>>> SUBSYS=3D3D3D1043:1783 >>>>>>>>>>>>>>>> IRQ=3D3D3D18 >>>>>>>>>>>>>>>> HDA=3D3D3D1039:7502 >>>>>>>>>>>>>>>> SOFT=3D3D3D1039:7502.HDA >>>>>>>>>>>>>>>> HDAchipVendorID=3D3D3D1057 >>>>>>>>>>>>>>>> CHIP=3D3D3D0x10573055 >>>>>>>>>>>>>>>> IDENT=3D3D3Dslmodemd >>>>>>>>>>>>>>>> SLMODEMD_DEVICE=3D3D3Dhw:0=3D3D2C6 >>>>>>>>>>>>>>>> Driver=3D3D3Dsnd-hda-intel >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> =3D3DA0For candidate modem in:=3D3DA0 00:0f.0 >>>>>>>>>>>>>>>> =3D3DA0=3D3DA0 0403 Audio device: Silicon Integrated Systems [= >>>> SiS] Az=3D >>>>>>> alia Au=3D3D >>>>>>>>>> dio >>>>>>>>>>>>>>>> Controller >>>>>>>>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0 Primary device ID:=3D3DA0 = >>>> 1039:7502 >>>>>>>>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0 Subsystem PCI_id=3D3DA0 1043:1783 >>>>>>>>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0 Softmodem codec or chipset from diagnost= >>>> ics: 0x10=3D >>>>>>> 573055 >>>>>>>>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA= >>>> 0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D >>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3D >>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0 from=3D3DA0= >>>> =3D3DA0=3D3DA0 Archives: >>>>>>>>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA= >>>> 0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D >>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3D >>>>>>>>>> =3D3DA0 The HDA card softmodem chip is 0x10573055 >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Support type needed or chipset:=3D3DA0=3D3DA0=3D3DA0 slmodemd = >>>> supportin=3D >>>>>>> g the >>>>>>>>>>>>>>>> snd-hda-intel >>>>>>>>>>>>>>>> audio+modem driver >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> =3D3DA0An ALSA (Advanced Linux Sound Architecture) modem drive= >>>> r: >>>>>>>>>>>>>>>> snd-hda-intel >>>>>>>>>>>>>>>> =3D3DA0provides Low Level support enabling contact with the mo= >>>> dem h=3D >>>>>>> ardwa=3D3D >>>>>>>>>> re. >>>>>>>>>>>>>>>> =3D3DA0For all BUT Conexant chip soft modems (using hsfmodem s= >>>> oftwa=3D >>>>>>> re) >>>>>>>>>>>>>>>> =3D3DA0complementary High Level support is through a Smartlink= >>>> util=3D >>>>>>> ity: >>>>>>>>>>>>>>>> slmodemd >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> =3D3DA0Download from http://linmodems.technion.ac.il/packages/= >>>> smart=3D >>>>>>> link/ >>>>>>>>>>>>>>>> =3D3DA0the package SLMODEMD.gcc4.3.tar.gz having a compiled sl= >>>> modem=3D >>>>>>> d. Un=3D3D >>>>>>>>>> pack >>>>>>>>>>>>>>>> under >>>>>>>>>>>>>>>> Linux with: >>>>>>>>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0 $ tar zxf SLMODEMD.gcc4.3.tar.gz >>>>>>>>>>>>>>>> =3D3DA0and read instructions therein. But briefly=3D3D2C the m= >>>> odem is=3D >>>>>>> setup =3D3D >>>>>>>>>> with >>>>>>>>>>>>>>>> command: >>>>>>>>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0 sudo slmodemd -c YOUR_COUNTRY --a= >>>> lsa hw:0=3D3D=3D >>>>>>> 2C6 >>>>>>>>>>>>>>>> =3D3DA0reporting dynamic creation of ports: >>>>>>>>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0 /dev/ttySL0 --> /dev/pts/N=3D3DA0=3D3DA0= >>>> =3D3D2C with N=3D >>>>>>> some number >>>>>>>>>>>>>>>> =3D3DA0Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt f= >>>> or fo=3D >>>>>>> llow >>>>>>>>>>>>>>>> through >>>>>>>>>>>>>>>> guidance. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Writing DOCs/Smartlink.txt >>>>>>>>>>>>>>>> =3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3= >>>> D=3D3D3D=3D3D3D=3D3D3D end =3D >>>>>>> Smartlink section =3D3D3D=3D3D3D=3D3D3D=3D3D >>>>>>>>>> =3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D= >>>> 3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D >>>>>>> =3D3D3D=3D3D3D=3D3D3D=3D3D3D >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> =3D3DA0Completed candidate modem analyses. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> =3D3DA0The base of the UDEV device file system is: /dev/.udev >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> =3D3DA0Versions adequately match for the compiler installed: 4= >>>> .3.3 >>>>>>>>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA= >>>> 0=3D3DA0=3D3DA0=3D3DA0 and =3D >>>>>>> the compiler used in kernel=3D3D >>>>>>>>>> assembly: 4.3.3 >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> =3D3DA0Minimal compiling resources appear complete: >>>>>>>>>>>>>>>> =3D3DA0=3D3DA0 make utility - /usr/bin/make >>>>>>>>>>>>>>>> =3D3DA0=3D3DA0 Compiler version 4.3 >>>>>>>>>>>>>>>> =3D3DA0=3D3DA0 linuc_headers base folder /lib/modules/2.6.28-1= >>>> 6-gener=3D >>>>>>> ic/buil=3D3D >>>>>>>>>> d >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> =3D3DA0However some compilations and executable functions may = >>>> need =3D >>>>>>> addit=3D3D >>>>>>>>>> ional >>>>>>>>>>>>>>>> files=3D3D2C >>>>>>>>>>>>>>>> =3D3DA0in the FileNames.h (so called kernel "h"eaders) collect= >>>> ion i=3D >>>>>>> nstal=3D3D >>>>>>>>>> led >>>>>>>>>>>>>>>> in >>>>>>>>>>>>>>>> /usr/include/ . >>>>>>>>>>>>>>>> =3D3DA0For martian_modem=3D3D2C additional required packages a= >>>> re need=3D >>>>>>> ed. The=3D3D >>>>>>>>>> also >>>>>>>>>>>>>>>> required headers of package libc6 are commonly installed by de= >>>> fau=3D >>>>>>> lt. >>>>>>>>>>>>>>>> =3D3DA0Compiling hsfmodem drivers does require linux-libc-dev = >>>> and l=3D >>>>>>> ibc6-=3D3D >>>>>>>>>> dev >>>>>>>>>>>>>>>> packages=3D3D2C for kernels 2.6.24 and later versions. >>>>>>>>>>>>>>>> =3D3DA0In not included on your install CD=3D3D2C search for th= >>>> em at >>>>>>>>>>>>>>>> http://packages.ubuntu.com >>>>>>>>>>>>>>>> =3D3DA0or comparable Repository for other Linux distros. >>>>>>>>>>>>>>>> =3D3DA0When compiling ALSA drivers=3D3D2C the utility "patch" = >>>> will al=3D >>>>>>> so be n=3D3D >>>>>>>>>> eeded. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> If a driver compilation fails=3D3D2C with message including so= >>>> me la=3D >>>>>>> ck of=3D3D >>>>>>>>>> some >>>>>>>>>>>>>>>> FileName.h (stdio.h for example)=3D3D2C then >>>>>>>>>>>>>>>> Some additional kernel-header files need installation to /usr/= >>>> inc=3D >>>>>>> lud=3D3D >>>>>>>>>> e. >>>>>>>>>>>>>>>> The >>>>>>>>>>>>>>>> minimal additional packages are libc6-dev >>>>>>>>>>>>>>>> and any of its dependents=3D3D2C under Ubuntu linux-libc-dev >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> If an alternate ethernet connection is available=3D3D2C >>>>>>>>>>>>>>>> $=3D3DA0 apt-get update >>>>>>>>>>>>>>>> $=3D3DA0 apt-get -s install linux-kernel-devel >>>>>>>>>>>>>>>> will install needed packages. >>>>>>>>>>>>>>>> For Debian/Ubuntu related distributions=3D3D2C run the followi= >>>> ng co=3D >>>>>>> mmand=3D3D >>>>>>>>>> to >>>>>>>>>>>>>>>> display the needed package list: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Otherwise packages have to be found through http://packages.ub= >>>> unt=3D >>>>>>> u.c=3D3D >>>>>>>>>> om >>>>>>>>>>>>>>>> Once downloaded and transferred into a Linux partition=3D3D2C >>>>>>>>>>>>>>>> they can be installed alltogether with: >>>>>>>>>>>>>>>> $ sudo dpkg -i *.deb >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Checking pppd properties: >>>>>>>>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0 -rwsr-xr-- 1 root dip 321600 2009-02-20 = >>>> 19:26 /us=3D >>>>>>> r/sbin/pp=3D3D >>>>>>>>>> pd >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> In case of an "error 17" "serial loopback" problem=3D3D2C see: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> http://linmodems.technion.ac.il/linmodems/archive-sixth/msg026= >>>> 37.=3D >>>>>>> htm=3D3D >>>>>>>>>> l >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> To enable dialout without Root permission do: >>>>>>>>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0 $ su - root=3D3DA0 (not for Ubuntu) >>>>>>>>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0 sudo chmod a= >>>> +x /usr/sbin/pppd >>>>>>>>>>>>>>>> or under Ubuntu related Linuxes >>>>>>>>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0 sudo chmod a+x /usr/sbin/pppd >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Checking settings of:=3D3DA0=3D3DA0=3D3DA0 /etc/ppp/options >>>>>>>>>>>>>>>> asyncmap 0 >>>>>>>>>>>>>>>> noauth >>>>>>>>>>>>>>>> crtscts >>>>>>>>>>>>>>>> lock >>>>>>>>>>>>>>>> hide-password >>>>>>>>>>>>>>>> modem >>>>>>>>>>>>>>>> proxyarp >>>>>>>>>>>>>>>> lcp-echo-interval 30 >>>>>>>>>>>>>>>> lcp-echo-failure 4 >>>>>>>>>>>>>>>> noipx >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> In case of a message like: >>>>>>>>>>>>>>>> =3D3DA0=3D3DA0 Warning: Could not modify /etc/ppp/pap-secrets:= >>>> Permis=3D >>>>>>> sion de=3D3D >>>>>>>>>> nied >>>>>>>>>>>>>>>> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg0= >>>> 465=3D >>>>>>> 6.h=3D3D >>>>>>>>>> tml >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Read Modem/DOCs/YourSystem.txt concerning other COMM channels:= >>>> et=3D >>>>>>> h0 >>>>>>>>>>>>>>>> wlan0 >>>>>>>>>>>>>>>> wmaster0 >>>>>>>>>>>>>>>> Which can interfere with Browser naviagation. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> =3D3DA0Don't worry about the following=3D3D2C it is for expert= >>>> s shoul=3D >>>>>>> d troub=3D3D >>>>>>>>>> le >>>>>>>>>>>>>>>> shooting >>>>>>>>>>>>>>>> be necessary. >>>>>>>>>>>>>>>> =3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3= >>>> D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D >>>>>>> =3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D >>>>>>>>>> =3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D= >>>> 3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D >>>>>>> =3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D= >>>> =3D3D3D=3D3D >>>>>>>>>> =3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D3D=3D3D= >>>> 3D=3D3D3D >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> =3D3DA0Checking for modem support lines: >>>>>>>>>>>>>>>> =3D3DA0-------------------------------------- >>>>>>>>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0 /device/modem symbolic link:=3D3D= >>>> A0=3D3DA0 lrwxr=3D >>>>>>> wxrwx 1 root ro=3D3D >>>>>>>>>> ot 6 2009-11-01 >>>>>>>>>>>>>>>> 16:04 /dev/modem -> ttySL0 >>>>>>>>>>>>>>>> slmodemd created symbolic link /dev/ttySL0:=3D3DA0 lrwxrwxrwx = >>>> 1 roo=3D >>>>>>> t roo=3D3D >>>>>>>>>> t 10 >>>>>>>>>>>>>>>> 2009-11-01 16:04 /dev/ttySL0 -> /dev/pts/0 >>>>>>>>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0 Within /etc/udev/ files: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0 Within /etc/modprobe.conf files: >>>>>>>>>>>>>>>> /etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries= >>>> in=3D >>>>>>> or=3D3D >>>>>>>>>> der >>>>>>>>>>>>>>>> to >>>>>>>>>>>>>>>> blacklist unwanted modem drivers >>>>>>>>>>>>>>>> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-mo= >>>> dem >>>>>>>>>>>>>>>> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-m= >>>> ode=3D >>>>>>> m >>>>>>>>>>>>>>>> /etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index= >>>> =3D3D3=3D >>>>>>> D-2 >>>>>>>>>>>>>>>> /etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index= >>>> =3D3D=3D >>>>>>> 3D-2 >>>>>>>>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0 Within any ancient /etc/devfs fil= >>>> es: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0 Within ancient kernel 2.4.n /etc/= >>>> module.conf=3D >>>>>>> files: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> --------- end modem support lines -------- >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Thank you very much for helping me. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA= >>>> 0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D >>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3D >>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3D= >>>> A0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D >>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0= >>>> =3D3DA0=3D3D >>>>>>>>>> =3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0=3D3DA0 Alfredo >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> ______________________________________________________________= >>>> ___ >>>>>>>>>>>>>>>> Inf=3D3DF3rmate=3D3D2C mantente en contacto y encu=3D3DE9ntral= >>>> o todo=3D3D=3D >>>>>>> 2C a la vez=3D3D >>>>>>>>>> . Con la >>>>>>>>>>>>>>>> nueva >>>>>>>>>>>>>>>> Toolbar de MSN =3D3DA0nunca has tenido tantas ventajas en tan = >>>> poco =3D >>>>>>> espac=3D3D >>>>>>>>>> io. >>>>>>>>>>>>>>>> http://toolbar.es.msn.com/ >>>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> En tu material escolar no puede faltar el nuevo Pack de Emoticono= >>>> s V=3D >>>>>>> uel=3D3D >>>>>>>>>> ta >>>>>>>>>>>>> al Cole =3D3DA0=3D3DA1Desc=3D3DE1rgatelo gratis! Es muy divertido >>>>>>>>>>>>> _________________________________________________________________ >>>>>>>>>>>>> =3D3DBFSab=3D3DEDas que ahora puedes hablar por Messenger desde H= >>>> otmail =3D >>>>>>> con tod=3D3D >>>>>>>>>> os tus >>>>>>>>>>>>> contactos? Revisa tu correo mientras conversas con tus amigos. >>>>>>>>>>>>> http://www.hotmail.com >>>>>>>>>>>> >>>>>>>>>> =3D3D20 >>>>>>>>>> _________________________________________________________________ >>>>>>>>>> Convierte las fotos que m=3D3DE1s te gustan en tu nuevo fondo de esc= >>>> ritor=3D >>>>>>> io par=3D3D >>>>>>>>>> a el ordenador. Es f=3D3DE1cil y adem=3D3DE1s gratis >>>>>>>>>> http://wallpapers.msn.com/es-es=3D3D >>>>>>>>> >>>>>>>>> _________________________________________________________________ >>>>>>>>> Vive toda la experiencia de Messenger con Orange desde tu Blackberry = >>>> =3DA1=3D >>>>>>> Desc=3DFAbrelo! >>>>>>>>> http://serviciosmoviles.es.msn.com/messenger/blackberry.aspx >>>>>>> =3D20 >>>>>>> _________________________________________________________________ >>>>>>> =3DBFSab=3DEDas que ahora puedes hablar por Messenger desde Hotmail con= >>>> todos t=3D >>>>>>> us contactos? Revisa tu correo mientras conversas con tus amigos.=3D20 >>>>>>> http://www.hotmail.com =3D >>>>>> >>>>>> _________________________________________________________________ >>>>>> Vive toda la experiencia de Messenger con Orange desde tu Blackberry =A1= >>>> Desc=FAbrelo! >>>>>> http://serviciosmoviles.es.msn.com/messenger/blackberry.aspx >>>> =20 >>>> _________________________________________________________________ >>>> S=F3lo hay un loro experto en Windows 7 en todo el mundo. Y vive en Sietes = >>>> =A1C=F3nocelo! >>>> http://www.sietesunpueblodeexpertos.com/= >>> >>> _________________________________________________________________ >>> >>> > > _________________________________________________________________ > >
