Wesam, Please SUBSCRIBE to this List using the Subscribe link at www.linmodems.org, as it may be necessary to exchange a few messages. The issue is a bit complexe This modem chip hosted on your Audio card > Codec: LSI ID 1040 > Address: 1 > Vendor Id: 0x11c11040 is in prinicipal supported. But as yet only upto 2.6.27 kernels. Ubuntu Jaunty will support such earlier 2.7.27 kernels In rational sequence you need to do the following, but read 4) below first anddo all the metioned downloads before any downloads; 1) The dialer utility package WVDIAL does not appear to be installed on your System. For Ubuntu Jaunty users, there are at the bottom of http://linmodems.technion.ac.il/packages/: wvdial_jaunty_i386.zip for 32 bit systems. These are about 1 MB in size. After downloaded and copied into your Linux partition: $ unzip wv*.zip Within the new folder: $ sudo dpkg -i *.deb will complete the wvdial installation Please read Modem/DOCs/wvdial.txt for usage information. 2) from http://packages.ubuntu.com/intrepid/linux-image-2.6.27-9-generic start the download of the package intrepid/linux-image-2.6.27-9-generic 3) from http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ get: agrsm_howto.txt agrsm-2.6.27-9-generic_2.6.27-9.14a_i386.deb agrsm-tools_0.0.1_all.deb 4) Do the installations in the following sequence: $ sudo dpkg -i linux-image*.deb will install the linux-image-2.6.27-9-generic package Reboot under the newer 2.6.27-9-generic kernel Next install the wvdial related packages for later modem testing. $ sudo dpkg -i agrsm-2*.deb will install the modem drivers matching the 2.6.27-9-generic kernel $ sudo dpkg -i agrsm-tools*.deb will load supporting scripts and run a first test of the drivers. MarvS On Sun, Oct 18, 2009 at 1:19 PM, wesam break <wesam_break@xxxxxxxxx> wrote: > > wesso > > --- On Sun, 10/18/09, wesam break <wesam_break@xxxxxxxxx> wrote: > > From: wesam break <wesam_break@xxxxxxxxx> > Subject: please can you help to find my modem driver > To: DISCUSS@xxxxxxxxxxxxx > Date: Sunday, October 18, 2009, 9:56 AM > > Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server, > as HTML can contain viruses. Use as the email Subject Line: > YourName, YourCountry kernel 2.6.28-13-generic > With this Subject Line cogent experts will be alerted, and useful case names left in the Archive. > YourCountry will enable Country specific guidance. Linux experts in YourCountry > can be found through: http://www.linux.org/groups/index.html. > They will know your Country's modem code, which may be essential for dialup service. > Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters. > So in a day, also check the Archived responses at http://www.linmodems.org > -------------------------- System information > ---------------------------- > CPU=i686, > Linux version 2.6.28-13-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #44-Ubuntu SMP Tue Jun 2 07:57:31 UTC 2009 > scanModem update of: 2009_08_15 > > The dialer utility package WVDIAL does not appear to be installed on your System. > For Ubuntu Jaunty users, there are at the bottom of http://linmodems.technion.ac.il/packages/: > wvdial_jaunty_amd64.zip for x86_64, 64 bit bus systems. > wvdial_jaunty_i386.zip for 32 bit systems. > These are about 1 MB in size. After downloaded and copied into your Linux partition: > $ unzip wv*.zip > Within the new folder: > $ sudo dpkg -i *.deb > will complete the wvdial installation > Please read Modem/DOCs/wvdial.txt for usage information. > There are no blacklisted modem drivers in /etc/modprobe* files > > Potentially useful modem drivers now loaded are: > snd_hda_intel > > Attached USB devices are: > ID 046d:c018 Logitech, Inc. Optical Wheel Mouse > ID 0408:13ba Quanta Computer, Inc. > ID 0bda:0158 Realtek Semiconductor Corp. Mass Stroage Device > If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html > A sample report is: http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html > > If a USB modem or cellphone is attached and was not detected, please > provide available information in your request to discuss@xxxxxxxxxxxxx > > For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are: > PCI slot PCI ID SubsystemID Name > ---------- > --------- --------- -------------- > 00:1b.0 8086:293e 1854:1774 Audio device: Intel Corporation 82801I > > Modem interrupt assignment and sharing: > 22: 4705 4629 IO-APIC-fasteoi HDA Intel > --- Bootup diagnostics for card in PCI slot 00:1b.0 ---- > [ 0.543716] pci 0000:00:1b.0: reg 10 64bit mmio: [0xd9200000-0xd9203fff] > [ 0.543757] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold > [ 0.543761] pci 0000:00:1b.0: PME# disabled > [ 12.840241] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 > [ 12.840313] HDA Intel 0000:00:1b.0: setting latency timer to 64 > > The PCI slot 00:1b.0 of the modem card may be disabled early > in > a bootup process, but then enabled later. If modem drivers load > but the modem is not responsive, read DOCs/Bootup.txt about possible fixes. > Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx > if help is needed. > > > > ===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== > The ALSA packages provide audio support and also drivers for some modems. > ALSA diagnostics are written during bootup to /proc/asound/ folders. > > The ALSA verion is 1.0.18 > The modem cards detected by "aplay -l" are: None > > > The /proc/asound/pcm file reports: > ----------------------- > 00-00: ALC268 Analog : ALC268 Analog : playback 1 : capture 1 > 00-04: ALC268 Analog : ALC268 Analog : capture 1 > > about /proc/asound/cards: > ------------------------ > 0 [Intel ]: HDA-Intel - HDA > Intel > HDA Intel at 0xd9200000 irq 22 > > PCI slot 00:1b.0 has a High Definition Audio Card > The drivers are in the kernel modules tree at: > /lib/modules/2.6.28-13-generic/kernel/sound/pci/hda/snd-hda-intel.ko > /lib/modules/2.6.28-11-generic/kernel/sound/pci/hda/snd-hda-intel.ko > The modem codec file for the HDA card is: /proc/asound/card0/codec#1 > -------------------------------------------------------- > Codec: LSI ID 1040 > Address: 1 > Vendor Id: 0x11c11040 > Subsystem Id: 0x18541774 > Revision Id: 0x100200 > Modem Function Group: 0x1 > > The audio card hosts a softmodem chip: 0x11c11040 > If not a Conexant modem, the driver agrsm with its dependent drivers: > > ---------- > provide audio + modem support with the modem chip residing on the subsystem. > Any > particular card can host any one of several soft modem chips. > > === Finished firmware and bootup diagnostics, next deducing cogent software. === > > Predictive diagnostics for card in bus 00:1b.0: > Modem chipset detected on > NAME="Audio device: Intel Corporation 82801I " > CLASS=0403 > PCIDEV=8086:293e > SUBSYS=1854:1774 > IRQ=22 > HDA=8086:293e > SOFT=8086:293e.HDA > HDAchipVendorID=11c1 > CHIP=0x11c11040 > IDENT=agrsm > Driver=agrsm > > For candidate modem in: 00:1b.0 > 0403 Audio device: Intel Corporation 82801I > Primary device ID: 8086:293e > Subsystem PCI_id 1854:1774 > Softmodem codec or chipset from diagnostics: > 0x11c11040 > from Archives: > The HDA card softmodem chip is 0x11c11040 > > > Support type needed or chipset: agrsm > > > Writing DOCs/Intel.txt > > The AgereSystems/LSI agrsm code supports compiling of a agrmodem + agrsm driver pair. > One resource site is http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ > Thereat get the agrsm_howto.txt and one of the agrsm-tools packages. > The initial agrsm_howto.txt compiling steps are only cogent to modems with PCI IDs: > 11c1:0620, 11c1:048c and 11c1:048f chips. > They use > the agrsm-20090418.tar.gz package. > The agrsm-tools sets a useful symbolic link and a agrsm-test utlity > > For AgereSystems/LSI with Vendor 11c1 chips hosted on High Definition Audio cards, there may be support > through the agrsm resources (providing an agrmodem + agrserial driver pair) as an alternative to usage > of the snd-hda-intel driver + slmodemd helper. For the 11c11040 modem chip, ONLY the agrsm code is competent. > Your Linux distro's dkms package should be first installed, as it directs the installation of modem > specific dkms-agrsm resources, and also directs auto-installation of new drivers upon kernel upgrades. > > Currently, the dkms-agrsm code is NOT competent for 2.26.28 and later kernels. > A short term fix is to install linux-image + linux-headers packages for earlier kernels. > For detailed instructions for Ubuntu Jaunty with 2.6.28 kernels, see > http://linmodems.technion.ac.il/bigarch/archive-nineth/msg01316.html > > The primary dkms-agrsm resource site is http://linux.zsolttech.com/linmodem/agrsm/ > whereat a few different packaging types are available. Debian type installers (supporting Ubuntu too) > are copied to http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ . Thereat the current package > is the dkms-agrsm_2.1.80-6_i386.deb is for Agere/LSI chipsets hosted on High Definition Audio cards. > Read the Modem/DOCs/Agrsm.txt for details. > > -------------- end Agere Systems section ------------------- > > Completed candidate modem analyses. > > The base of the UDEV device file system is: /dev/.udev > > Versions adequately match for the compiler installed: 4.3.3 > and the compiler used in kernel assembly: 4.3.3 > > > > Minimal compiling resources > appear complete: > make utility - /usr/bin/make > Compiler version 4.3 > linuc_headers base folder /lib/modules/2.6.28-13-generic/build > > However some compilations and executable functions may need additional files, > in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ . > For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default. > Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions. > In not included on your install CD, search for them at http://packages.ubuntu.com > or comparable Repository for other Linux distros. > When compiling ALSA drivers, the utility "patch" will also be needed. > > > Compressed files at: /usr/src/lzma.tar.bz2 > > > If a driver compilation > fails, with message including some lack of some FileName.h (stdio.h for example), then > Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev > and any of its dependents, under Ubuntu linux-libc-dev > > If an alternate ethernet connection is available, > $ apt-get update > $ apt-get -s install linux-kernel-devel > will install needed packages. > For Debian/Ubuntu related distributions, run the following command to display the needed package list: > > Otherwise packages have to be found through http://packages.ubuntu.com > Once downloaded and transferred into a Linux partition, > they can be installed alltogether with: > $ sudo dpkg -i *.deb > > Checking settings of: /etc/ppp/options > asyncmap 0 > noauth > crtscts > lock > hide-password > modem > proxyarp > lcp-echo-interval 30 > lcp-echo-failure 4 > noipx > > In case of a message > like: > Warning: Could not modify /etc/ppp/pap-secrets: Permission denied > see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html > > Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 ra0 > Which can interfere with Browser naviagation. > > Don't worry about the following, it is for experts should trouble shooting be necessary. > ========================================================== > > Checking for modem support lines: > -------------------------------------- > /device/modem symbolic link: > slmodemd created symbolic link /dev/ttySL0: > Within /etc/udev/ files: > > Within /etc/modprobe.conf files: > /etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2 > /etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem > index=-2 > /etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers > /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem > /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem > Within any ancient /etc/devfs files: > > Within ancient kernel 2.4.n /etc/module.conf files: > > --------- end modem support lines -------- > > > wesso > > > > > > > > >
