Jacques, Attached is for the smartlink/ubunut/ folder Giancarlo, Unpack the attached. $ tar zxf slam*.tar.gz Read the 1stRead.txt in the unpacked folder. Run the $ sudo ./setup MarvS scanModem maintainer On Wed, Sep 30, 2009 at 1:26 PM, Antonio Olivares <olivares14031@xxxxxxxxx> wrote: > Giancarlo, > > Before you use gnomePPP, please use wvdial directly. After you have > successfully run > > $ sudo modprobe ungrab-winmodem > $ sudo modprobe slamr > $ sudo slmodemd -c ITALY /dev/slamr0 > > Then run > $ sudo wvdialconf /etc/wvdial.conf > > Make the changes necessary, add username, phone number and a line > "Carrier Check = no" to your wvdial.conf file. > > First try to connect with wvdial by itself, you might also need to > adjust your wvdial.conf file with X3 and a +MS=90 or +MS=34 option. > Read up on > Modem/DOCs/wvdial.txt for further instruction/examples. > > Regards, > > Antonio > > > On 9/30/09, Giancarlo Fusetti <askfus@xxxxxxxxx> wrote: >> Antonio, >> first of all many thanks for your support. >> I did it but it doesn't work, when I launch gnomePPP I receive the >> message "modem not responding" >> I checked under Administration in "hardware driver" and I found >> "SmartLink HAMR5600,SmartPCI56/561 based modem driver) >> I try to sum up the operation I did: >> - install wvdial >> - install build essential sl-modem-daemon >> - donload 2 file ungrab and slmodem >> - make and sudo make install for both >> (for slmodem during make I receive a warning message: could not find >> /home/..../slmodem-2.9.1120090222/drivers/.amrlibs.o.cmd for >> /home/..../slmodem-2.9.1120090222/drivers/.amrlibs.o) >> - sudo modprobe ungrab >> - sudo modprobe slamr >> - sudo /etc/init.d/sl-modem-daemon restar >> - modified /etc/modules >> >> Any other suggestion? >> Thanks in advance >> >> Antonio Olivares wrote: >>> Giancarlo, >>> >>> scanModem reports that your modem is supported by slamr >>> (slmodem-2.9.11-20090222.tar.gz + ungrab-winmodem-20090716.tar.gz). >>> It seems that no prebuilt slamr package exists for your kernel -15 in >>> Ubuntu directory: >>> >>> http://linmodems.technion.ac.il/packages/smartlink/Ubuntu/ >>> >>> Only the following one exists: >>> http://linmodems.technion.ac.il/packages/smartlink/Ubuntu/slamr-2.6.28-11-generic.tar.gz >>> >>> For candidate modem in: 00:0a.0 >>> 0703 Modem: Motorola SM56 Data Fax Modem >>> Primary device ID: 1057:3052 >>> Support type needed or chipset: slamr >>> >>> >>> >>> 1057:3052 has a Motorola chipset, poorly supported by Motorola itself >>> However Zello discovered that drivers written to support Smartlink >>> modems do support the 1057:3052 chipset!! >>> It sufficed to add 1057:3052 to the list of modem cards recognized >>> by the Smartlink slamr driver. >>> There is a ungrab-winmodem driver used in conjunction with slamr, >>> which must have 1057:3052 >>> similarly added. See messages from Zello: >>> >>> http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00846.html >>> >>> http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00848.html >>> and Alvaro Aguirre about the ungrab-winmodem fix: >>> >>> http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00990.html >>> For general guidance on ungrab-winmodem + slamr usage, read the >>> DOCs/Smartlink.txt >>> >>> The modem is supported by the Smartlink >>> plus the slmodemd helper utility. Read the >>> DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through >>> guidance. >>> >>> >>> For 2.6.28-15-generic compiling drivers is necessary. As of October >>> 2007 the current packages at >>> http://linmodems.technion.ac.il/packages/smartlink/ are the >>> ungrab-winmodem-20070505.tar.gz and slmodem-2.9.11-20080126.tar.gz >>> >>> You will have to build your own package by compiling: >>> >>> Do download >>> http://linmodems.technion.ac.il/packages/smartlink/ungrab-winmodem-20090716.tar.gz >>> and >>> http://linmodems.technion.ac.il/packages/smartlink/slmodem-2.9.11-20090222.tar.gz >>> >>> extract both and install them by following the instructions provided. >>> >>> >>> Regards, >>> >>> Antonio >>> >>> On 9/30/09, Giancarlo Fusetti <askfus@xxxxxxxxx> wrote: >>> >>>> I try again to send the email >>>> Thanks in advance >>>> >>>> >> >> >
Attachment:
slamr-2.6.28-15-generic.tar.gz
Description: GNU Zip compressed data