Modem Driver needed

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Country  : India
Name     : Kousthub
 Only plain text email is forwarded by the  Discuss@xxxxxxxxxxxxx List Server,
 as HTML can contain viruses. Use as the email Subject Line:
           YourName, YourCountry  kernel 2.6.28-11-generic 
 With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
 YourCountry will enable Country specific guidance. Linux experts in YourCountry 
 can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
 So in a day, also check the Archived responses at http://www.linmodems.org 
--------------------------  System information ----------------------------
CPU=i686,  
Linux version 2.6.28-11-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009
 scanModem update of:  2009_08_15

The dialer utility package WVDIAL does not appear to be installed on your System. 
For Ubuntu Jaunty users, there are at the bottom of http://linmodems.technion.ac.il/packages/:
     wvdial_jaunty_amd64.zip   for x86_64, 64 bit bus systems.
     wvdial_jaunty_i386.zip    for 32 bit systems.
These are about 1 MB in size.  After downloaded and copied into your Linux partition:
$ unzip wv*.zip
Within the new folder:
$ sudo dpkg -i *.deb
will  complete the wvdial installation
Please read Modem/DOCs/wvdial.txt for usage information.
 There are no blacklisted modem drivers in /etc/modprobe*  files 
 Potentially useful modem drivers now loaded are:
                

If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx

For candidate card in slot 01:01.0, firmware information and bootup diagnostics are:
 PCI slot	PCI ID		SubsystemID	Name
 ----------	---------	---------	--------------
 01:01.0	1543:3052	1543:3000	Modem: SILICON Laboratories Intel 537 [Winmodem] 

 Modem interrupt assignment and sharing: 
 --- Bootup diagnostics for card in PCI slot 01:01.0 ----
[    0.489214] pci 0000:01:01.0: reg 10 32bit mmio: [0xff8ff000-0xff8fffff]
[    0.489222] pci 0000:01:01.0: reg 14 io port: [0xb800-0xb8ff]
[    0.489259] pci 0000:01:01.0: PME# supported from D0 D3hot D3cold
[    0.489264] pci 0000:01:01.0: PME# disabled
[    1.585855] serial 0000:01:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    1.585989] 0000:01:01.0: ttyS1 at I/O 0xb808 (irq = 22) is a 16450
[    1.586075] 0000:01:01.0: ttyS2 at I/O 0xb810 (irq = 22) is a 8250
[    1.586160] 0000:01:01.0: ttyS3 at I/O 0xb818 (irq = 22) is a 16450
[    1.586187] Couldn't register serial port 0000:01:01.0: -28

 The PCI slot 01:01.0 of the modem card may be disabled early in 
 a bootup process,  but then enabled later. If modem drivers load 
 but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
 Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
 if help is needed.
 

=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

Predictive  diagnostics for card in bus 01:01.0:
	Modem chipset  detected on
NAME="Modem: SILICON Laboratories Intel 537 [Winmodem] "
CLASS=0703
PCIDEV=1543:3052
SUBSYS=1543:3000
IRQ=22
IDENT=INTEL537_on_1543:3052

 For candidate modem in:  01:01.0
   0703 Modem: SILICON Laboratories Intel 537 [Winmodem] 
      Primary device ID:  1543:3052
 Support type needed or chipset:	INTEL537_on_1543:3052
 


 Completed candidate modem analyses.

 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.3.3
             and the compiler used in kernel assembly: 4.3.3

 The patch utility is needed and is needed for compiling ALSA drivers, and possibly others. 

 
 Minimal compiling resources appear complete:
   make utility - /usr/bin/make
   Compiler version 4.3
   linuc_headers base folder /lib/modules/2.6.28-11-generic/build

 However some compilations and executable functions may need additional files,
 in the FileNames.h (so called kernel "h"eaders) collection installed in  /usr/include/ .
 For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default. 
 Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
 In not included on your install CD, search for them at http://packages.ubuntu.com
 or comparable Repository for other Linux distros.
 When compiling ALSA drivers, the utility "patch" will also be needed.




If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb


Checking pppd properties:
	-rwsr-xr-- 1 root dip 277352 2009-02-20 22:55 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
    http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
	$ su - root  (not for Ubuntu)
        sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
	sudo chmod a+x /usr/sbin/pppd

Checking settings of:	/etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.

 Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================

 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:   
slmodemd created symbolic link /dev/ttySL0:  
     Within /etc/udev/ files:

     Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------


[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux