Vo,
scanModem unfortunately does not detect the modem as it is. However,
you may follow the advice provided to determine the modem chipset:
A candidate modem is not evident among the PCI devices:
------------------------------------------------
00:02.0 VGA compatible controller: Intel Corporation
82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801DB (ICH4) IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
SMBus Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 02)
------------------------------------------------
with USB and bridge devices not displayed.
If your modem is connected by an external serial cable,
or mounted internally on an ISA card, scanModem would not access it.
Try with Root permission
$ wvdialconf /etc/wvdial.conf
to detect these modem types and some USB modems.
If the detection is successful, read the DOCs/wvdial.txt .
Edit the /etc/wvdial.conf with Root permission:
gedit /etc/wvdial.conf
will be able to dial out with Root permission:
wvdial
**********************************************
to do this part above you need this part
The dialer utility package WVDIAL does not appear to be installed on
your System.
For Ubuntu Jaunty users, there are at the bottom of
http://linmodems.technion.ac.il/packages/:
wvdial_jaunty_amd64.zip for x86_64, 64 bit bus systems.
wvdial_jaunty_i386.zip for 32 bit systems.
These are about 1 MB in size. After downloaded and copied into your
Linux partition:
$ unzip wv*.zip
Within the new folder:
$ sudo dpkg -i *.deb
will complete the wvdial installation
Please read Modem/DOCs/wvdial.txt for usage information.
**********************************
Many modems for which scanModem fails have Conexant chips.
From http://www.linuxant.com/drivers/modemident.php
get the ListModem tool, which will report on Conexant chipset modems
If the above tests fail, please provide any independent information
available on your modem.
If an alternative boot into Microsoft windows can be done, do mouse
clicks on:
Start > Settings > Control Panel > Classical View (for Window XP) > System
Hardware > Device Manager > Modems > Click on the + > Modem. Double click to
expand the graphic. Manufacturer information may be displayed. For example, CXT
stands for Conexant. Click the Diagnostics Tab. Record any hardware ID or vendor
and device information. From the Driver Details TAB, copy out the
VENdor and DEVice information.
Next do the Query Modem and record the ATI specifications displayed such as:
ATI3 - Agere SoftModem Version 2.1.22
ATI5 - 2.1.22, AMR Intel MB, AC97 ID:SIL REV:0x27
Try to identify the modem setup file, with name perhaps MODEM.INF.
If may contain chipset Vendor informaton.
Regards,
Antonio
2009/8/18 Võ Văn Hồng Ngọc <hn8456@xxxxxxxxx>:
>
>
> Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List
> Server,
> as HTML can contain viruses. Use as the email Subject Line:
> YourName, YourCountry kernel 2.6.26-2-686
> With this Subject Line cogent experts will be alerted, and useful case
> names left in the Archive.
> YourCountry will enable Country specific guidance. Linux experts in
> YourCountry
> can be found through: http://www.linux.org/groups/index.html.
> They will know your Country's modem code, which may be essential for dialup
> service.
> Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet
> Provider mail filters.
> So in a day, also check the Archived responses at http://www.linmodems.org
> -------------------------- System information ----------------------------
> CPU=i686,
> Linux version 2.6.26-2-686 (Debian 2.6.26-17) (dannf@xxxxxxxxxx) (gcc
> version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Sun Jun 21
> 04:57:38 UTC 2009
> scanModem update of: 2009_08_15
>
> The dialer utility package WVDIAL does not appear to be installed on your
> System.
> For Ubuntu Jaunty users, there are at the bottom of
> http://linmodems.technion.ac.il/packages/:
> wvdial_jaunty_amd64.zip for x86_64, 64 bit bus systems.
> wvdial_jaunty_i386.zip for 32 bit systems.
> These are about 1 MB in size. After downloaded and copied into your Linux
> partition:
> $ unzip wv*.zip
> Within the new folder:
> $ sudo dpkg -i *.deb
> will complete the wvdial installation
> Please read Modem/DOCs/wvdial.txt for usage information.
> There are no blacklisted modem drivers in /etc/modprobe* files
> Potentially useful modem drivers now loaded are:
>
>
> Attached USB devices are:
> ID 12a7:3160 Trendchip Technologies Corp.
> If a cellphone is not detected, see
> http://ubuntuforums.org/archive/index.php/t-878554.html
> A sample report is:
> http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
>
> If a USB modem or cellphone is attached and was not detected, please
> provide available information in your request to discuss@xxxxxxxxxxxxx
>
> === Finished firmware and bootup diagnostics, next deducing cogent software.
> ===
>
> A candidate modem is not evident among the PCI devices:
> ------------------------------------------------
> 00:02.0 VGA compatible controller: Intel Corporation
> 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 03)
> 00:1f.1 IDE interface: Intel Corporation 82801DB (ICH4) IDE Controller (rev
> 02)
> 00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus
> Controller (rev 02)
> 00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM
> (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 02)
> ------------------------------------------------
> with USB and bridge devices not displayed.
>
> If your modem is connected by an external serial cable,
> or mounted internally on an ISA card, scanModem would not access it.
> Try with Root permission
> $ wvdialconf /etc/wvdial.conf
> to detect these modem types and some USB modems.
> If the detection is successful, read the DOCs/wvdial.txt .
> Edit the /etc/wvdial.conf with Root permission:
> gedit /etc/wvdial.conf
> will be able to dial out with Root permission:
> wvdial
>
> Many modems for which scanModem fails have Conexant chips.
> From http://www.linuxant.com/drivers/modemident.php
> get the ListModem tool, which will report on Conexant chipset modems
>
> If the above tests fail, please provide any independent information
> available on your modem.
> If an alternative boot into Microsoft windows can be done, do mouse
> clicks on:
> Start > Settings > Control Panel > Classical View (for Window XP) > System
>>
>> Hardware > Device Manager > Modems > Click on the + > Modem. Double click
>> to
>
> expand the graphic. Manufacturer information may be displayed. For example,
> CXT
> stands for Conexant. Click the Diagnostics Tab. Record any hardware ID or
> vendor
> and device information. From the Driver Details TAB, copy out the VENdor and
> DEVice information.
> Next do the Query Modem and record the ATI specifications displayed such as:
> ATI3 - Agere SoftModem Version 2.1.22
> ATI5 - 2.1.22, AMR Intel MB, AC97 ID:SIL REV:0x27
> Try to identify the modem setup file, with name perhaps MODEM.INF.
> If may contain chipset Vendor informaton.
>
>
> The base of the UDEV device file system is: /dev/.udev
>
> The kernel was compiled with gcc version 4.1.3 and a compiler is not
> installed
>
> linux-headers-2.6.26-2-686 resources needed for compiling are not
> manifestly ready!
> The code linking utility, ld, may be needed and is provided in the binutils
> package
>
> If compiling is necessary packages must be installed, providing:
> gcc-4.1 make linux-headers-2.6.26-2-686
>
> For Debian and some related distributions, a package kernel-kbuild-2.6-26
> may be needed to support driver compiling.
>
>
> If a driver compilation fails, with message including some lack of some
> FileName.h (stdio.h for example), then
> Some additional kernel-header files need installation to /usr/include. The
> minimal additional packages are libc6-dev
> and any of its dependents, under Ubuntu linux-libc-dev
>
> If an alternate ethernet connection is available,
> $ apt-get update
> $ apt-get -s install linux-kernel-devel
> will install needed packages.
> For Debian/Ubuntu related distributions, run the following command to
> display the needed package list:
>
> Otherwise packages have to be found through http://packages.ubuntu.com
> Once downloaded and transferred into a Linux partition,
> they can be installed alltogether with:
> $ sudo dpkg -i *.deb
>
> Checking settings of: /etc/ppp/options
>
>
> In case of a message like:
> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
>
>
> Don't worry about the following, it is for experts should trouble shooting
> be necessary.
> ==========================================================
>
> Checking for modem support lines:
> --------------------------------------
> /device/modem symbolic link:
> slmodemd created symbolic link /dev/ttySL0:
> Within /etc/udev/ files:
> /etc/udev/rules.d/80-drivers.rules:SUBSYSTEM=="atm",
> RUN+="dsl-modem.agent"
> Within /etc/modprobe.conf files:
> /etc/modprobe.d/alsa-base-blacklist:# Uncomment these entries in order to
> blacklist unwanted modem drivers
> /etc/modprobe.d/alsa-base-blacklist:# blacklist snd-atiixp-modem
> /etc/modprobe.d/alsa-base-blacklist:# blacklist snd-via82xx-modem
> /etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
> /etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
> Within any ancient /etc/devfs files:
>
> Within ancient kernel 2.4.n /etc/module.conf files:
>
> --------- end modem support lines --------
>
> For Debian users, the linux-headers-2.6.26-2-686.deb can be used instead of
> kernel-source/
>
>
> ===================================
> Thanks for help.
>
