Jose,
scanModem recommends that you download SLMODEMD.gcc4.1.tar.gz
For candidate modem in: 00:1b.0
0403 Audio device: Intel Corporation 82801H
Primary device ID: 8086:284b
Subsystem PCI_id 1558:5409
Softmodem codec or chipset from diagnostics: 0x10573055
from Archives:
The HDA card softmodem chip is 0x10573055
Support type needed or chipset: slmodemd supporting the snd-hda-intel
audio+modem driver
An ALSA (Advanced Linux Sound Architecture) modem driver: snd-hda-intel
provides Low Level support enabling contact with the modem hardware.
For all BUT Conexant chip soft modems (using hsfmodem software)
complementary High Level support is through a Smartlink utility: slmodemd
Download from http://linmodems.technion.ac.il/packages/smartlink/
the package SLMODEMD.gcc4.1.tar.gz having a compiled slmodemd. Unpack
under Linux with:
$ tar zxf SLMODEMD.gcc4.1.tar.gz
and read instructions therein. But briefly, the modem is setup with command:
$ sudo slmodemd -c YOUR_COUNTRY --alsa hw:0,6
reporting dynamic creation of ports:
/dev/ttySL0 --> /dev/pts/N , with N some number
Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow
through guidance.
But also that wvdial is not installed on your system.
The dialer utility package WVDIAL does not appear to be installed on
your System.
Please read Modem/DOCs/wvdial.txt
You can try to dialout with KPPP but having wvdial is beneficial in
troubleshooting cases and with SLMODEMD/slamr cases because of Carrier
Check = no parameters and Init strings that are harder to copy over to
KPPP. Report back if you encounter difficulties.
Regards,
Antonio
2009/8/13 jose <jdiaz@xxxxxxxxxx>:
>
>
