Re: Lazaro Rojas, Cuba

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



For what it is worth, I have been dealing with an Agere/LSI modem with an 11c1:0630 code since April and have tried multiple packages including the suggested agrsm-20090418 with no luck.  I mention this because you have an 0620 and would be very interested in what you use to get your modem working as it may help with my 0630.  

Thanks.


--- olivares14031@xxxxxxxxx wrote:

From: Antonio Olivares <olivares14031@xxxxxxxxx>
To: Dr. Lázaro J. Rojas Sopo <lazaro.rojas@xxxxxxxxxxxxxx>
Cc: discuss@xxxxxxxxxxxxx
Subject: Re: Lazaro Rojas, Cuba
Date: Mon, 20 Jul 2009 19:12:28 -0500

Dr. Lazaro,

scanModem reports that your modem is an 11c1 0620 needing package:
agrsm-20090418.tar.gz

 Support type needed or chipset:	agrsm



Writing DOCs/Intel.txt

The AgereSystems/LSI agrsm code supports compiling of a agrmodem +
agrsm driver pair.
One resource site is http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
Thereat get the agrsm_howto.txt and one of the agrsm-tools packages.
The initial agrsm_howto.txt compiling steps are only cogent to modems
with PCI IDs:
   11c1:0620, 11c1:048c and 11c1:048f chips.
   They use the agrsm-20090418.tar.gz package.
The agrsm-tools sets a useful symbolic link and a agrsm-test utlity

For AgereSystems/LSI with Vendor 11c1 chips hosted on High Definition
Audio cards, there may be support
through the agrsm resources (providing an agrmodem + agrserial driver
pair) as an alternative to usage
of the snd-hda-intel driver + slmodemd helper. For the 11c11040 modem
chip, ONLY the agrsm code is competent.
Your Linux distro's dkms package should be first installed, as it
directs the installation of modem
specific dkms-agrsm resources, and also directs auto-installation of
new drivers upon kernel upgrades.

Currently, the dkms-agrsm code is NOT competent for 2.6.28 and later kernels.
A short term fix is to install linux-image + linux-headers packages
for earlier kernels.
For detailed instructions for Ubuntu Jaunty with 2.6.28 kernels, see
http://linmodems.technion.ac.il/bigarch/archive-nineth/msg01316.html

The primary dkms-agrsm resource site is
http://linux.zsolttech.com/linmodem/agrsm/
whereat a few different packaging types are available. Debian type
installers (supporting Ubuntu too)
are copied to http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
. Thereat the current package
is the dkms-agrsm_2.1.80-6_i386.deb is for Agere/LSI chipsets hosted
on High Definition Audio cards.
Read the Modem/DOCs/Agrsm.txt for details.

This modem is a difficult one.  I have tried myself to make it work,
but I have gotten kernel oops and tainted messages, and if compliation
succeeds, modprobe agrmodem and modprobe agrserial work, then the
modem does not respond or wvdial does not find it, it could be because
of :

 Modem interrupt assignment and sharing:
 15:          0   IO-APIC-edge      ata_piix
 --- Bootup diagnostics for card in PCI slot 01:0a.0 ----
PCI: 0000:01:0a.0 reg 10 io port: [b800, b8ff]
pci 0000:01:0a.0: PME# supported from D3hot D3cold
pci 0000:01:0a.0: PME# disabled

 The PCI slot 01:0a.0 of the modem card may be disabled early in
 a bootup process,  but then enabled later. If modem drivers load
 but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
 Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
 if help is needed.

I don't know if there are success stories with this modem hardware?
It is a difficult one to deal with :(

Regards,

Antonio

On 7/20/09, Dr. Lázaro J. Rojas Sopo <lazaro.rojas@xxxxxxxxxxxxxx> wrote:
> I've tried for a quiet long period to install my softmodem under Linux
> environments, first tried on Debian related distros and failed, despite the
> unquestionable and steady help of the friend Marvin Stodolsky, now I came
> back to SuSE to wich I was used to and would like you to assist me. I should
> say I'm not a Linux expert and have
> no programming knowledge, rather the oppossite, I'm a surgeon. I attach the
> ModemData.txt file as requiered and send the mail in plain text.
> Thanks in advance.
> Note: Since I live in Cuba, I don't have free Internet access, just a very
> restricted one, so if someone decides to help me, I'd need him/her to attach
> the needed drivers and/or files in zipped form as well as the corresponding
> instructions.
> Dr. Lázaro J. Rojas Sopo.
>
>
>
> --
> Saludos,
>  Dr.                          mailto:lazaro.rojas@xxxxxxxxxxxxxx
>
> ---------------------------------------
>     Red Telematica de Salud - Cuba
>     	  CNICM - Infomed
>
>




[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux