There might be a problem using KPPP because of usage of the port type /dev/ttySM --< /dev/pts/N The /dev/pts/N ports require the Carrier Check = no for which you will need some equivalent for usage with KPPP MarvS On Wed, Jul 15, 2009 at 7:58 PM, Antonio Olivares<olivares14031@xxxxxxxxx> wrote: > Felipe, > > Great! If you want to automate the process and also connect with > kppp. You may just run > $ su - > passwd: > > enter your password = passwd: > # cd martian-full-20080625/scripts/ > # ./automate.sh > > should set you up so you won't have to type > # sudo modprobe martian_dev > # martian_modem > > Do open the file with editior as root (su -) > # /etc/rc.d/init.d/martian > > and change device=/dev/ttySM0 to /dev/modem or make a symbolic link > and you can acess the modem with kppp > > # ln -s /dev/ttySM0 /dev/modem > > if you do this, please check with > > # ls /dev/modem -l > > and see that it maps to /dev/ttySM0. > > For the other modem, you may download the files > > http://linmodems.technion.ac.il/packages/smartlink/slmodem-2.9.11-20090222.tar.gz > http://linmodems.technion.ac.il/packages/smartlink/ungrab-winmodem-20080126.tar.gz > > Do extract them with > $ tar -zxvf slmodem-2.9.11-20090222.tar.gz > $ tar -zxvf ungrab-winmodem-20080126.tar.gz > $ cd slmodem-2.9.11-20090222 > $ make KERNEL_DIR= /lib/modules/2.6.27.7-9-pae/build > $ make > $ su -c make install > $ cd ../ungrab-winmodem-20080126/ > $ su -c 'make' > enter your password > $ su -c 'make install' > > To test if this modem functions or not, please do > $ su - > passwd: > # modprobe ungrab-winmodem > # modprobe slamr > # slmodemd -c YOUR_COUNTRY /dev/slamr0 > > YOUR_COUNTRY can be USA if you are in USA. > > Then run seprate tests with wvdial, but please save your current > working wvdial :) > > The two modems can work together, but currently (IMHO) In my humble > opinion at the moment it might be better to stick with martian modem > drivers. The smartlink modem drivers work, but in your case > might/might not > > Predictive diagnostics for card in bus 05:00.0: > Modem chipset detected on > NAME="Modem: ALi Corporation SmartLink SmartPCI561 56K Modem" > NAME="Modem: ALi Corporation SmartLink SmartPCI561 56K Modem" > CLASS=0703 > PCIDEV=10b9:5459 > SUBSYS=10a5:5459 > IRQ=20 > IDENT=slamr > CLASS=0703 > PCIDEV=10b9:5459 > SUBSYS=10a5:5459 > IRQ=20 > IDENT=slamr > > For candidate modem in: 05:00.0 > 0703 Modem: ALi Corporation SmartLink SmartPCI561 56K Modem > Primary device ID: 10b9:5459 > Support type needed or chipset: slamr > > Also if you decide to use smarlink modem the one on top, you > might/could encounter kernel oops which you will not encounter while > using martian modem drivers. > > BUG: sleeping function called from invalid context at include/linux/kernel.h:155 > in_atomic(): 0, irqs_disabled(): 1, pid: 9712, name: slmodemd > Pid: 9712, comm: slmodemd Tainted: P 2.6.30.1 #1 > Call Trace: > [<c042e75d>] __might_sleep+0xcf/0xd4 > [<c053e161>] might_fault+0x12/0x19 > [<c053e2a6>] copy_to_user+0x2c/0xfc > [<fcc50286>] amrmo_read+0x49/0x5f [slamr] > [<fcc5023d>] ? amrmo_read+0x0/0x5f [slamr] > [<c04a7262>] vfs_read+0x81/0xdc > [<c04a7356>] sys_read+0x3b/0x60 > [<c0407f38>] sysenter_do_call+0x12/0x2d > > > Do what you like and thankfully you have connected successfully. > > Regards, > > Antonio > > > On 7/15/09, Felipe . <eufelipe@xxxxxxxxxxx> wrote: >> >> Thank You, I'm connected with Opensuse now (I don't believe), \o/.... =), >> thanks!!! >> But, I would like to know, how I can configure kppp, because in kppp I can't >> find /dev/ttySM0 as the modem port. How can I know the speed of conection >> too? >> >> And if I will want to install the other modem? Is there no conflict problem? >> You said that: the other modem could be supported by slamr >> (slmodem-2.9.11-20090222.tar.gz) (should be the same steps??), if I will >> install the other modem, should be conflict problems?(sorry by the english >> vocabulary) >> >> Thank you very much, >> Felipe. >> >> >> >> >>> Date: Wed, 15 Jul 2009 15:47:27 -0500 >>> Subject: Re: Help: Agere SoftModem (Lucent) >>> From: olivares14031@xxxxxxxxx >>> To: eufelipe@xxxxxxxxxxx >>> CC: discuss@xxxxxxxxxxxxx >>> >>> Everything looks correct. Now wvdialconf does not find a modem port >>> /dev/ttySM0 >>> >>> please try to edit the wvdial.conf file and or type the following >>> there in /etc/wvdial.conf. Please put everything as shown and put >>> correct username, password and Phone number to connect to ISP. >>> >>> >>> >>> [Dialer Defaults] >>> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>> Modem Type = Analog Modem >>> Phone = ISP's_phone_no._goes_here >>> ISDN = 0 >>> Username = your_username_goes_here >>> Init1 = ATZ >>> Password = Your_password >>> Modem = /dev/ttySM0 >>> Baud = 460800 >>> Carrier Check = No >>> # Stupid Mode = 1 >>> >>> remove the # on Line Stupid Mode = 1 if needed. report back after >>> successfully saving /etc/wvdial.conf to look like above file and >>> typing wvdial on terminal >>> >>> # wvdial >>> >>> to see if you can connect. >>> >>> Regards, >>> >>> Antonio >>> On 7/15/09, Felipe . <eufelipe@xxxxxxxxxxx> wrote: >>> > >>> > >>> > >>> > I do the >>> > exact things that you said, see them:If there is a mistake in sintaxe >>> > please >>> > say to me, I can't find /dev/ttySM0 as the modem port.The things are >>> > separed >>> > in terminals (2 terminals below) >>> > Thank You,Felipe. >>> > >>> > >>> > >>> > >>> > >>> > In the >>> > first terminal: >>> > >>> > >>> > >>> > linux-vqqf:~ >>> > # cd Desktop >>> > >>> > linux-vqqf:~/Desktop >>> > # ls >>> > >>> > Linmodemdiscuss Office.desktop Support.desktop novo >>> > >>> > MozillaFirefox.desktop SuSE.desktop myComputer.desktop >>> > >>> > linux-vqqf:~/Desktop >>> > # cd Linmodemdiscuss >>> > >>> > linux-vqqf:~/Desktop/Linmodemdiscuss >>> > # tar -zxvf >>> > martian-full-20080625.tar.gz >>> > >>> > >>> > martian-full-20080625/ >>> > >>> > >>> > martian-full-20080625/martian.h >>> > >>> > martian-full-20080625/Makefile >>> > >>> > martian-full-20080625/INSTALL >>> > >>> > martian-full-20080625/Concept >>> > >>> > martian-full-20080625/Makefile~ >>> > >>> > martian-full-20080625/Cleaning.txt >>> > >>> > martian-full-20080625/README >>> > >>> > martian-full-20080625/kmodule/ >>> > >>> > martian-full-20080625/kmodule/Makefile >>> > >>> > martian-full-20080625/kmodule/marsio.h >>> > >>> > martian-full-20080625/kmodule/kmartian.h >>> > >>> > martian-full-20080625/kmodule/martian_ids.c >>> > >>> > martian-full-20080625/kmodule/fifo.h >>> > >>> > martian-full-20080625/kmodule/Files.txt >>> > >>> > martian-full-20080625/kmodule/mfifo.h >>> > >>> > martian-full-20080625/kmodule/martian.c >>> > >>> > martian-full-20080625/kmodule/kmodulefiles.txt >>> > >>> > martian-full-20080625/kmodule/marsio.c >>> > >>> > martian-full-20080625/kmodule/mfifo.c >>> > >>> > martian-full-20080625/kmodule/modules.order >>> > >>> > martian-full-20080625/kmodule/mixspinlock.h >>> > >>> > martian-full-20080625/scripts/ >>> > >>> > martian-full-20080625/scripts/martian >>> > >>> > martian-full-20080625/scripts/remove_outdated.sh >>> > >>> > martian-full-20080625/scripts/martian.in >>> > >>> > martian-full-20080625/scripts/wv.conf >>> > >>> > martian-full-20080625/scripts/automate.sh >>> > >>> > martian-full-20080625/ChangeLog >>> > >>> > martian-full-20080625/modem/ >>> > >>> > martian-full-20080625/modem/Makefile >>> > >>> > martian-full-20080625/modem/tweakcore.sh >>> > >>> > martian-full-20080625/modem/main.c >>> > >>> > martian-full-20080625/modem/debug_script.in >>> > >>> > martian-full-20080625/modem/ltmdmobj.o >>> > >>> > martian-full-20080625/modem/watch.gdb >>> > >>> > martian-full-20080625/modem/sysdep.h >>> > >>> > martian-full-20080625/modem/watch3.gdb >>> > >>> > martian-full-20080625/modem/dumpers.c >>> > >>> > martian-full-20080625/modem/elf386tweakrelocs.c >>> > >>> > martian-full-20080625/modem/log.h >>> > >>> > martian-full-20080625/modem/core_if.c >>> > >>> > martian-full-20080625/modem/coreadd.c >>> > >>> > martian-full-20080625/modem/mport.h >>> > >>> > martian-full-20080625/modem/coresubst.c >>> > >>> > martian-full-20080625/modem/ASWMLICENSE >>> > >>> > martian-full-20080625/modem/README >>> > >>> > martian-full-20080625/modem/mport.c >>> > >>> > martian-full-20080625/modem/isr.c >>> > >>> > martian-full-20080625/modem/core.h >>> > >>> > martian-full-20080625/modem/watch2.gdb >>> > >>> > martian-full-20080625/modem/tweakrelocsdynamic.c >>> > >>> > martian-full-20080625/modem/log.c >>> > >>> > martian-full-20080625/modem/session.c >>> > >>> > martian-full-20080625/modem/watch4.gdb >>> > >>> > martian-full-20080625/modem/pty.c >>> > >>> > martian-full-20080625/modem/sysdep.c >>> > >>> > martian-full-20080625/modem/common.h >>> > >>> > martian-full-20080625/modem/main.h >>> > >>> > martian-full-20080625/modem/smp.c >>> > >>> > martian-full-20080625/modem/modemfiles.txt >>> > >>> > martian-full-20080625/modem/watch.h >>> > >>> > martian-full-20080625/modem/overriden_core_functions >>> > >>> > martian-full-20080625/modem/profile.c >>> > >>> > martian-full-20080625/modem/link.c >>> > >>> > martian-full-20080625/modem/mixspinlock.h >>> > >>> > linux-vqqf:~/Desktop/Linmodemdiscuss >>> > # cd >>> > martian-full-20080625 >>> > >>> > linux-vqqf:~/Desktop/Linmodemdiscuss/martian-full-20080625 >>> > # make all >>> > >>> > make -C kmodule/ modules >>> > >>> > >>> > make[1]: >>> > Entering directory >>> > `/root/Desktop/Linmodemdiscuss/martian-full-20080625/kmodule' >>> > >>> > >>> > >>> > make -C >>> > /lib/modules/2.6.27.7-9-pae/build >>> > M="/root/Desktop/Linmodemdiscuss/martian-full-20080625/kmodule" modules >>> > >>> > >>> > make[2]: >>> > Entering directory `/usr/src/linux-2.6.27.7-9-obj/i386/pae' >>> > >>> > make -C >>> > ../../../linux-2.6.27.7-9 O=/usr/src/linux-2.6.27.7-9-obj/i386/pae/. >>> > modules >>> > >>> > CC [M] >>> > /root/Desktop/Linmodemdiscuss/martian-full-20080625/kmodule/martian.o >>> > >>> > >>> > /root/Desktop/Linmodemdiscuss/martian-full-20080625/kmodule/martian.c: >>> > In function ‘martian_isr’: >>> > >>> > /root/Desktop/Linmodemdiscuss/martian-full-20080625/kmodule/martian.c:131: >>> > warning: value computed is not used >>> > >>> > CC [M] >>> > /root/Desktop/Linmodemdiscuss/martian-full-20080625/kmodule/marsio.o >>> > >>> > >>> > /root/Desktop/Linmodemdiscuss/martian-full-20080625/kmodule/marsio.c:359: >>> > warning: ‘mars_read_register_rem’ defined but not used >>> > >>> > /root/Desktop/Linmodemdiscuss/martian-full-20080625/kmodule/marsio.c:372: >>> > warning: ‘mars_write_register_rem’ defined but not used >>> > >>> > CC [M] >>> > /root/Desktop/Linmodemdiscuss/martian-full-20080625/kmodule/mfifo.o >>> > >>> > >>> > LD [M] >>> > /root/Desktop/Linmodemdiscuss/martian-full-20080625/kmodule/martian_dev.o >>> > >>> > >>> > Building modules, stage 2. >>> > >>> > MODPOST 1 modules >>> > >>> > CC >>> > /root/Desktop/Linmodemdiscuss/martian-full-20080625/kmodule/martian_dev.mod.o >>> > >>> > >>> > LD [M] >>> > /root/Desktop/Linmodemdiscuss/martian-full-20080625/kmodule/martian_dev.ko >>> > >>> > >>> > make[2]: >>> > Leaving directory `/usr/src/linux-2.6.27.7-9-obj/i386/pae' >>> > >>> > make[1]: >>> > Leaving directory >>> > `/root/Desktop/Linmodemdiscuss/martian-full-20080625/kmodule' >>> > >>> > >>> > >>> > make -C >>> > modem/ all >>> > >>> > make[1]: >>> > Entering directory >>> > `/root/Desktop/Linmodemdiscuss/martian-full-20080625/modem' >>> > >>> > >>> > CC >>> > main.o >>> > >>> > CC dumpers.o >>> > >>> > CC log.o >>> > >>> > CC session.o >>> > >>> > CC mport.o >>> > >>> > CC pty.o >>> > >>> > CC sysdep.o >>> > >>> > CC >>> > isr.o >>> > >>> > CC >>> > smp.o >>> > >>> > CC >>> > core_if.o >>> > >>> > CC >>> > coresubst.o >>> > >>> > CC link.o >>> > >>> > CC >>> > tweakrelocsdynamic.o >>> > >>> > CC >>> > coreadd.o >>> > >>> > CC >>> > elf386tweakrelocs >>> > >>> > LD >>> > marscore.o >>> > >>> > TWEAK marscore.o >>> > >>> > LD martian_modem >>> > >>> > >>> > make[1]: >>> > Leaving directory >>> > `/root/Desktop/Linmodemdiscuss/martian-full-20080625/modem' >>> > >>> > >>> > linux-vqqf:~/Desktop/Linmodemdiscuss/martian-full-20080625 >>> > # su -c 'make install' >>> > >>> > >>> > make -C >>> > kmodule/ install >>> > >>> > make[1]: >>> > Entering directory >>> > `/root/Desktop/Linmodemdiscuss/martian-full-20080625/kmodule' >>> > >>> > >>> > >>> > make -C >>> > /lib/modules/2.6.27.7-9-pae/build >>> > M="/root/Desktop/Linmodemdiscuss/martian-full-20080625/kmodule" >>> > modules_install >>> > >>> > make[2]: >>> > Entering directory `/usr/src/linux-2.6.27.7-9-obj/i386/pae' >>> > >>> > make -C >>> > ../../../linux-2.6.27.7-9 O=/usr/src/linux-2.6.27.7-9-obj/i386/pae/. >>> > modules_install >>> > >>> > INSTALL >>> > /root/Desktop/Linmodemdiscuss/martian-full-20080625/kmodule/martian_dev.ko >>> > >>> > >>> > DEPMOD >>> > 2.6.27.7-9-pae >>> > >>> > make[2]: >>> > Leaving directory `/usr/src/linux-2.6.27.7-9-obj/i386/pae' >>> > >>> > if ! >>> > /sbin/modprobe -nq martian_dev ; then /sbin/depmod -a; fi >>> > >>> > make[1]: >>> > Leaving directory >>> > `/root/Desktop/Linmodemdiscuss/martian-full-20080625/kmodule' >>> > >>> > >>> > >>> > make -C >>> > modem/ install >>> > >>> > make[1]: >>> > Entering directory >>> > `/root/Desktop/Linmodemdiscuss/martian-full-20080625/modem' >>> > >>> > >>> > LD >>> > martian_modem.debug >>> > >>> > STRIP martian_modem.debug >>> > >>> > STRIP martian_modem.stripped >>> > >>> > INSTALL /usr/sbin/martian_modem >>> > >>> > INSTALL /usr/lib/debug/usr/sbin/martian_modem.debug >>> > >>> > make[1]: >>> > Leaving directory >>> > `/root/Desktop/Linmodemdiscuss/martian-full-20080625/modem' >>> > >>> > linux-vqqf:~/Desktop/Linmodemdiscuss/martian-full-20080625 >>> > # su - >>> > >>> > Have a lot >>> > of fun... >>> > >>> > Directory: >>> > /root >>> > >>> > Wed Jul 15 >>> > 17:02:07 BRT 2009 >>> > >>> > linux-vqqf:~ >>> > # passwd: >>> > >>> > -bash: >>> > passwd:: command not found >>> > >>> > linux-vqqf:~ >>> > # su - passwd: >>> > >>> > su: user >>> > passwd: does not exist >>> > >>> > linux-vqqf:~ >>> > # modprobe martian_dev >>> > >>> > linux-vqqf:~ >>> > # martian_modem >>> > >>> > martian: >>> > info: smp: configuring >>> > >>> > martian: >>> > info: Your port is /dev/ttySM0 >>> > >>> > martian: >>> > info: session: Started Wed Jul 15 17:04:56 2009 >>> > >>> > >>> > >>> > >>> > >>> > In >>> > another terminal: >>> > >>> > >>> > >>> > linux-vqqf:~ >>> > # su - >>> > >>> > >>> > Have a lot >>> > of fun... >>> > >>> > Directory: >>> > /root >>> > >>> > Wed Jul 15 >>> > 17:04:31 BRT 2009 >>> > >>> > linux-vqqf:~ >>> > # wvdialconf >>> > /etc/wvdial.conf >>> > >>> > Editing >>> > `/etc/wvdial.conf'. >>> > >>> > >>> > >>> > Scanning >>> > your serial ports for a modem. >>> > >>> > >>> > >>> > ttyS0<*1>: >>> > ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud >>> > >>> > ttyS0<*1>: >>> > ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud >>> > >>> > ttyS0<*1>: >>> > ATQ0 V1 E1 -- and failed too at 115200, giving up. >>> > >>> > ttyS1<*1>: >>> > ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud >>> > >>> > ttyS1<*1>: >>> > ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud >>> > >>> > ttyS1<*1>: >>> > ATQ0 V1 E1 -- and failed too at 115200, giving up. >>> > >>> > ttyS2<*1>: >>> > ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud >>> > >>> > ttyS2<*1>: >>> > ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud >>> > >>> > ttyS2<*1>: >>> > ATQ0 V1 E1 -- and failed too at 115200, giving up. >>> > >>> > ttyS3<*1>: >>> > ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud >>> > >>> > ttyS3<*1>: >>> > ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud >>> > >>> > ttyS3<*1>: >>> > ATQ0 V1 E1 -- and failed too at 115200, giving up. >>> > >>> > ttyS4<*1>: >>> > ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud >>> > >>> > ttyS4<*1>: >>> > ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud >>> > >>> > ttyS4<*1>: >>> > ATQ0 V1 E1 -- and failed too at 115200, giving up. >>> > >>> > ttyS5<*1>: >>> > ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud >>> > >>> > ttyS5<*1>: >>> > ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud >>> > >>> > ttyS5<*1>: >>> > ATQ0 V1 E1 -- and failed too at 115200, giving up. >>> > >>> > Modem Port >>> > Scan<*1>: S6 S7 >>> > >>> > WvModem<*1>: >>> > Cannot get information for serial port. >>> > >>> > ttySM0<*1>: >>> > ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud >>> > >>> > ttySM0<*1>: >>> > ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud >>> > >>> > ttySM0<*1>: >>> > ATQ0 V1 E1 -- and failed too at 115200, giving up. >>> > >>> > >>> > >>> > >>> > >>> > Sorry, no >>> > modem was detected! Is it in use by >>> > another program? >>> > >>> > Did you >>> > configure it properly with setserial? >>> > >>> > >>> > >>> > Please read >>> > the FAQ at http://open.nit.ca/wiki/?WvDial >>> > >>> > >>> > >>> > If you >>> > still have problems, send mail to <wvdial-list@xxxxxxxxxxxx>. >>> > >>> > linux-vqqf:~ >>> > # su - >>> > >>> > >>> > Have a lot >>> > of fun... >>> > >>> > Directory: >>> > /root >>> > >>> > Wed Jul 15 >>> > 17:08:35 BRT 2009 >>> > >>> > linux-vqqf:~ >>> > # wvdialconf >>> > /etc/wvdial.conf >>> > >>> > Editing >>> > `/etc/wvdial.conf'. >>> > >>> > >>> > >>> > Scanning >>> > your serial ports for a modem. >>> > >>> > >>> > >>> > >>> > >>> > >>> > >>> > >>> > >>> > >>> > >>> > >>> > >>> > >>> > >>> > >>> > >>> > >>> >> Date: Wed, 15 Jul 2009 13:40:25 -0500 >>> >> Subject: Fwd: Help: Agere SoftModem (Lucent) >>> >> From: olivares14031@xxxxxxxxx >>> >> To: discuss@xxxxxxxxxxxxx >>> >> CC: eufelipe@xxxxxxxxxxx >>> >> >>> >> Felipe, >>> >> >>> >> You only want the LT Modem to work and not worry about the other modem >>> >> that could be supported by slamr (slmodem-2.9.11-20090222.tar.gz >>> >> >>> >> Do download >>> >> http://linmodems.technion.ac.il/packages/ltmodem/kernel-2.6/martian/martian-full-20080625.tar.gz >>> >> >>> >> as scanModem report below: >>> >> >>> >> However you have another problem reported by scanModem: >>> >> >>> >> 05:02.0 11c1:0440 11c1:0440 Communication controller: Agere Systems >>> >> 56k WinModem >>> >> >>> >> Modem interrupt assignment and sharing: >>> >> 9: 0 0 IO-APIC-fasteoi acpi >>> >> --- Bootup diagnostics for card in PCI slot 05:02.0 ---- >>> >> PCI: 0000:05:02.0 reg 10 32bit mmio: [ea101000, ea1010ff] >>> >> PCI: 0000:05:02.0 reg 14 io port: [d100, d107] >>> >> PCI: 0000:05:02.0 reg 18 io port: [d200, d2ff] >>> >> pci 0000:05:02.0: supports D2 >>> >> pci 0000:05:02.0: PME# supported from D2 D3hot D3cold >>> >> pci 0000:05:02.0: PME# disabled >>> >> >>> >> The PCI slot 05:02.0 of the modem card may be disabled early in >>> >> a bootup process, but then enabled later. If modem drivers load >>> >> but the modem is not responsive, read DOCs/Bootup.txt about possible >>> >> fixes. >>> >> Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx >>> >> if help is needed. >>> >> >>> >> Follow the instructions i >>> >> >>> >> The modem has a Lucent/Agere/LSI Mars or Apollo DSP (digital signal >>> >> processing) chipset. >>> >> Support packages for 2.6.n kernels are at: >>> >> http://linmodems.technion.ac.il/packages/ltmodem/kernel-2.6/martian/ >>> >> Always use the most update for kernels after 2.6.20, currently >>> >> For kernels 2.6.20 and less, usr martian-full-20080407.tar.gz. >>> >> >>> >> See DOCs/AgereDSP.txt for Details. >>> >> >>> >> At >>> >> http://linmodems.technion.ac.il/packages/ltmodem/kernel-2.6/martian/ >>> >> get the martian-full-20080625.tar.gz and follow Readme-NOW.html >>> >> 0x0440 -- Mars 2 - data/fax/voice >>> >> >>> >> .$ tar -zxvf martian-full-20080625.tar.gz >>> >> $ cd martian-full-20080625 >>> >> $ make all >>> >> $ su -c 'make install' >>> >> $ su - >>> >> passwd: >>> >> # modprobe martian_dev >>> >> # martian_modem >>> >> >>> >> Fire up another terminal and run >>> >> >>> >> $ su - >>> >> passwd: >>> >> # wvdialconf /etc/wvdial.conf >>> >> >>> >> it should scan and hopefully find /dev/ttySM0 as the modem port. >>> >> >>> >> Let me know how above suggestions work. Also please read up on >>> >> Bootup.txt to see how to fix IRQs and Modem Interrupt problems. >>> >> >>> >> Regards, >>> >> >>> >> Antonio >>> >> >>> >> >>> >> ---------- Forwarded message ---------- >>> >> From: "Felipe ." <eufelipe@xxxxxxxxxxx> >>> >> Date: Wed, 15 Jul 2009 16:51:40 +0000 >>> >> Subject: Help: Agere SoftModem (Lucent) >>> >> To: olivares14031@xxxxxxxxx >>> >> >>> >> >>> >> >>> >> >>> >> >>> >> >>> >> >>> >> >>> >> Hi, >>> >> I'm new at Linux (I'm using OpenSUSE 11.1), I'm having problems with >>> >> instaling the modem Lucent (I think chipset Agere, of 2 modem in the >>> >> ModemData.txt I only want to install Agere Systems), I tried a lot, >>> >> but it doesn't work, I installed a lot of package files, different >>> >> versions, including martian version, but didn't work (I don't know >>> >> what file should I use), if you could help-me or send-me tutorials for >>> >> begginers how to install and compile, I'm very confuse with >>> >> "linmodems". >>> >> I'm glad, sorry by the english vocabulary. I'm don't talk english very >>> >> well, >>> >> Thank you, >>> >> Felipe. >>> >> >>> >> _________________________________________________________________ >>> >> Lauren found her dream laptop. Find the PC that’s right for you. >>> >> http://www.microsoft.com/windows/choosepc/?ocid=ftp_val_wl_290 >>> > >>> > _________________________________________________________________ >>> > Insert movie times and more without leaving Hotmail®. >>> > http://windowslive.com/Tutorial/Hotmail/QuickAdd?ocid=TXT_TAGLM_WL_HM_Tutorial_QuickAdd_062009 >> >> _________________________________________________________________ >> Lauren found her dream laptop. Find the PC that’s right for you. >> http://www.microsoft.com/windows/choosepc/?ocid=ftp_val_wl_290 >
