Re: I need a driver for my Modem !!!

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Mohanad

http://linmodems.technion.ac.il/bigarch/archive-nineth/msg01316.html
has detailed instructions for establishing 2.6.27-?? support for
11c11040 chipsets under Juanty.

Antonio,
   This link will be put in the next scanModem update.

MarvS

On Sat, Jul 4, 2009 at 11:40 AM, Antonio
Olivares<olivares14031@xxxxxxxxx> wrote:
> Mohanad,
>
> If you can get a newer scanModem than the one you used.  It should
> help you even better.  If you get a newer scanModem, would you mind
> sending us ModemData.txt again after you run the newer scanModem.
>
>  The audio card hosts a softmodem chip:  0x11c11040
>
> However the following would be the recommendation:
>
> Currently, the dkms-agrsm code is NOT competent for 2.6.28 and later kernels.
> A short term fix is to install linux-image + linux-headers packages
> for earlier kernels.
> For example, for Ubuntu Jaunty with 2.6.28 kernels, linux-image +
> linux-headers packages
> for earlier 2.6.27 series Intrepid kernels can be installed. Search
> for them at:
>  http://packages.ubuntu.com
>
>
> From the records, if you don't send us new ModemData.txt, the
> following is recommended:
>
> Support type needed or chipset: agrsm
>
> Writing DOCs/Intel.txt
> The AgereSystems/LSI agrsm code supports compiling of a agrmodem +
> agrsm driver pair.
> One resource site is http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
> Thereat get the agrsm_howto.txt and one of the agrsm-tools packages.
> The initial agrsm_howto.txt compiling steps are only cogent to modems
> with PCI IDs:
>  11c1:0620, 11c1:048c and 11c1:048f chips.
>  They use the agrsm-20090418.tar.gz package.
> The agrsm-tools sets a useful symbolic link and a agrsm-test utlity
> For AgereSystems/LSI with Vendor 11c1 chips hosted on High Definition
> Audio cards, there may be support
> through the agrsm resources (providing an agrmodem + agrserial driver
> pair) as an alternative to usage
> of the snd-hda-intel driver + slmodemd helper. For the 11c11040 modem
> chip, ONLY the agrsm code is competent.
> Your Linux distro's dkms package should be first installed, as it
> directs the installation of modem
> specific dkms-agrsm resources, and also directs auto-installation of
> new drivers upon kernel upgrades.
> Currently, the dkms-agrsm code is NOT competent for 2.6.28 and later kernels.
> A short term fix is to install linux-image + linux-headers packages
> for earlier kernels.
> For example, for Ubuntu Jaunty with 2.6.28 kernels, linux-image +
> linux-headers packages
> for earlier 2.6.27 series Intrepid kernels can be installed. Search
> for them at:
>  http://packages.ubuntu.com
>
> The primary dkms-agrsm resource site is
> http://linux.zsolttech.com/linmodem/agrsm/
> whereat a few different packaging types are available. Debian type
> installers (supporting Ubuntu too)
> are copied to http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
> . Thereat the current package
> is the dkms-agrsm_2.1.80-6_i386.deb is for Agere/LSI chipsets hosted
> on High Definition Audio cards.
> Read the Modem/DOCs/Agrsm.txt for details.
>
> Regards,
>
> Antonio
>
> On 7/4/09, Mohanad Kaleia <ms.kaleia@xxxxxxxxx> wrote:
>>
>>
>


[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux