Slush, UK Linux Mint 6 Felicia kernel 2.6.27-7-generic

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Linmodems.org

Please can you help me set up my Orange Icon 225, USB mobile internet modem



Slush
Only plain text email is forwarded by the  Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry Linux Mint 6 Felicia kernel 2.6.27-7-generic With this Subject Line cogent experts will be alerted, and useful case names left in the Archive. YourCountry will enable Country specific guidance. Linux experts in YourCountry can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org -------------------------- System information ---------------------------- CPU=i686, Linux Mint 6 Felicia Linux version 2.6.27-7-generic (buildd@rothera) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu10) ) #1 SMP Fri Oct 24 06:42:44 UTC 2008
scanModem update of:  2009_05_31

There are no blacklisted modem drivers in /etc/modprobe* files Potentially useful modem drivers now loaded are: snd_hda_intel
Attached USB devices are:
ID 0af0:6971 Option ID 0951:1606 Kingston Technology ID 0930:6545 Toshiba Corp. If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html

If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx

For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
PCI slot	PCI ID		SubsystemID	Name
----------	---------	---------	--------------
00:1b.0 8086:2668 1043:82a1 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW Modem interrupt assignment and sharing: 16: 47029 IO-APIC-fasteoi uhci_hcd:usb5, HDA Intel, i915@pci:0000:00:02.0
--- Bootup diagnostics for card in PCI slot 00:1b.0 ----


===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.

The ALSA verion is 1.0.17
The modem cards detected by "aplay -l"  are: None


The /proc/asound/pcm file reports:
-----------------------
00-00: ALC662 Analog : ALC662 Analog : playback 1 : capture 1

about /proc/asound/cards:
------------------------
0 [Intel          ]: HDA-Intel - HDA Intel
                     HDA Intel at 0xf9eb8000 irq 16

PCI slot 00:1b.0 has a High Definition Audio Card
The drivers are in the kernel modules tree at:
/lib/modules/2.6.27-7-generic/kernel/sound/pci/hda/snd-hda-intel.ko
UNEXPECTED HDA diagnostic outcome.
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

A candidate modem is not evident among the PCI devices:
------------------------------------------------
00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04)
00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04)
00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04)
00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04)
------------------------------------------------
with USB and bridge devices not displayed.

If your modem is connected by an external serial cable,
or mounted internally on an ISA card, scanModem would not access it. Try with Root permission
$  wvdialconf  /etc/wvdial.conf
to detect these modem types and some USB modems.
If the detection is successful, read the DOCs/wvdial.txt .
Edit the /etc/wvdial.conf with Root permission:
	  gedit  /etc/wvdial.conf
 will be able to dial out with Root permission:
	 wvdial

Many modems for which scanModem fails have Conexant chips. From http://www.linuxant.com/drivers/modemident.php
get the ListModem tool, which will report on Conexant chipset modems

If the above tests fail, please provide any independent information available on your modem.
If an alternative boot into Microsoft windows can be done, do mouse
clicks on:
  Start > Settings > Control Panel > Classical View (for Window XP) > System
Hardware > Device Manager > Modems > Click on the + > Modem. Double click to
expand the graphic. Manufacturer information may be displayed. For example, CXT
stands for Conexant. Click the Diagnostics Tab. Record any hardware ID or vendor
and device information. From the Driver Details TAB, copy out the VENdor and DEVice information.
Next do the Query Modem and record the ATI specifications displayed such as:
   ATI3 - Agere SoftModem Version 2.1.22
   ATI5 - 2.1.22, AMR Intel MB, AC97 ID:SIL REV:0x27
Try to identify the modem setup file, with name perhaps MODEM.INF.
If may contain chipset Vendor informaton.


Predictive  diagnostics for card in bus 00:1b.0:
	Modem chipset not detected on
NAME="Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW "
CLASS=0403
PCIDEV=8086:2668
SUBSYS=1043:82a1
IRQ=16
HDA=8086:2668
SOFT=8086:2668.HDA


High Definition Audio (HDA) cards MAY host a modem chip in their Subsystem, and many are supported by the ALSA audio+modem driver snd-hda-intel
A modem was not detected on HDA card 8086:2668.
If another modem card is present, then most likely 8086:2668 does not host a modem.
If another modem card has not been detected, then possibilities are:
	1) A Conexant modem chip is present on 8086:2668, as Conexant chips
are frequently not detectable by ALSA diagnostics
	2) The modem may be of the older non-PCI Controller Chipset (hardware) type.
Try detection with Root permission:
	 wvdialconf  /etc/wvdial.conf

For candidate modem in:  00:1b.0
0403 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW Primary device ID: 8086:2668 Subsystem PCI_id 1043:82a1 Softmodem codec or chipset from diagnostics: from Archives:
Support type needed or chipset:	

Support can likely be achieved through two mutually exclusive alternatives:
1) The hsfmodem software for Conexant chipset modems: Read DOCs/Conexant.txt
The following ALSA alternative CANNOT work with Conexant modems.

2) An ALSA modem driver plus slmodemd.  Read DOCs/Smartlink.txt for details, and
to test get the package SLMODEMD.gcc4.3.tar.gz from:
	http://linmodems.technion.ac.il/packages/smartlink/


Writing DOCs/Intel.txt

For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt


Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find the
hsfmodem package matching your System. For several Linux distros, there are
precompiled drivers matched to specific kernels. These have within the FileName,
your KernelVersion:	2.6.27_7_generic
They can be found through http://www.linuxant.com/drivers/hsf/full/downloads.php A more precise location may be given a few paragraphs below. If an EXACT Match with your your KernelVersion is not found, one of the "Generic packages with source" near the bottom of the page must be used.
Downloaded packages must be moved into the Linux partition (home folder is OK)
and unzipped with:
	unzip hsf*.zip
The installation command for a .deb suffic packages is, with root/adm permission:
  dpkg -i hsf*.deb
while for .rpm suffix it is, with:
 rpm -i hsf*.rpm

Support for Conexant chips hosted on High Definition Audio cards may require
installation of additional packages, one of the alsa-driver-linuxant packages
on http://www.linuxant.com/alsa-driver/ At the same time download the alsa-driver-1.0.17-1.patch , in case it prove to be later needed. During the
hsfmodem install, there will be a message if there is necessary installation of
alsa-driver-linuxant

The installation command for a .deb suffic packages is, with root/adm permission:
  dpkg -i hsf*.deb
while for .rpm suffix it is, with:
 rpm -i hsf*.rpm

There may a message that "Dependencies" are not satisfied.  In this case the Ubuntu/Debian packages to be installed are linux-libc-dev & libc6-dev. Package
names may be different for other Linuxes. If not on your install CD, these
packages can be searched for at http://packages.ubuntu.com.  After download,
they can be coinstalled with:
	 dpkg -i li*.deb
Again try the alsa-driver-linuxant

There may be a message that the patch must be applied.  In this case get the
ftp://ftp.alsa-project.org/pub/driver/alsa-driver-1.0.17.tar.bz2 Under Linux, this package is unpacked with:
$ tar jxf alsa*.tar.bz2
Next the patch is applied with:
$ patch -p0 < alsa-driver-1.0.17-1.patch

See http://linmodems.technion.ac.il/bigarch/archive-eighth/msg00838.html
for details on compiling and installing replacement snd-hda-intel + its
dependent drivers.
After the installation is completed, rerun the hsfmodem installation.
Reboot and try to detect the modem with Root permission:
	 wvdialconf  /etc/wvdial.conf

Start at  http://www.linuxant.com/drivers/hsf/full for
eventually download of a hsfmodem-7.68.00.12full_k.???.zip package
with ??? the package type (deb, rpm, tar etc)
These packages have compiled drivers but will also compile a driver, if there is a mismatch between the resident kernel and provided driver.
The generic hsfmodem-7.68.00.12full.tar.gz package only provides compiling support

Read DOCs/Conexant.txt

Writing DOCs/Conexant.txt

Writing DOCs/Smartlink.txt
============ end Smartlink section =====================


The base of the UDEV device file system is: /dev/.udev

Versions adequately match for the compiler installed: 4.3.2
            and the compiler used in kernel assembly: 4.3.2

The patch utility is needed and is needed for compiling ALSA drivers, and possibly others.

Minimal compiling resources appear complete:
  make utility - /usr/bin/make
  Compiler version 4.3
  linuc_headers base folder /lib/modules/2.6.27-7-generic/build

However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in  /usr/include/ .
For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default. Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.



For Debian and some related distributions, a package kernel-kbuild-2.6-27 may be needed to support driver compiling.


If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb


Checking pppd properties:
	-rwsr-xr-- 1 root dip 273064 2008-10-16 02:51 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
   http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
	$ su - root  (not for Ubuntu)
        chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
	 chmod a+x /usr/sbin/pppd

Checking settings of:	/etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
  Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html


Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================

Checking for modem support lines:
--------------------------------------
/device/modem symbolic link: slmodemd created symbolic link /dev/ttySL0: Within /etc/udev/ files:

    Within /etc/modprobe.conf files:
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
    Within any ancient /etc/devfs files:

    Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------


[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux