Re: FW: Support for Usb modem

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hermat,

scanModem did not detect your USB modem.  You can do the following
which scanModem suggests.

If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx

=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

A candidate modem is not evident among the PCI devices:
------------------------------------------------
00:11.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller (rev 30)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 70)
01:00.0 VGA compatible controller: S3 Inc. VT8375 [ProSavage8 KM266/KL266]
------------------------------------------------
 with USB and bridge devices not displayed.

 If your modem is connected by an external serial cable,
 or mounted internally on an ISA card, scanModem would not access it.
 Try with Root permission
 $ sudo wvdialconf  /etc/wvdial.conf
 to detect these modem types and some USB modems.
 If the detection is successful, read the DOCs/wvdial.txt .
 Edit the /etc/wvdial.conf with Root permission:
 	sudo  gedit  /etc/wvdial.conf
  will be able to dial out with Root permission:
	sudo wvdial

The above that is : $ sudo wvdialconf /etc/wvdial.conf

If it fails to find your modem port, please send us output of
$ sudo lsusb

Regards,

Antonio

On 6/19/09, Hemant Gore <gorehem@xxxxxxxxx> wrote:
> I have attached file
>

[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux