Arun Get slamr-2.6.20-15-generic.tar.gz from http://linmodems.technion.ac.il/packages/smartlink/Ubuntu/ MarvS still traveling On Sat, Jun 13, 2009 at 10:25 AM, arun kumar<akcmails@xxxxxxxxx> wrote: > --------------------------------------------------------------------------------------------------------------- > Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server, > as HTML can contain viruses. Use as the email Subject Line: > YourName, YourCountry kernel 2.6.20-15-generic > With this Subject Line cogent experts will be alerted, and useful > case names left in the Archive. > YourCountry will enable Country specific guidance. Linux experts in > YourCountry > can be found through: http://www.linux.org/groups/index.html. > They will know your Country's modem code, which may be essential for > dialup service. > Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an > Internet Provider mail filters. > So in a day, also check the Archived responses at http://www.linmodems.org > -------------------------- System information ---------------------------- > CPU=i686, > Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 > (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 > scanModem update of: 2009_05_31 > > There are no blacklisted modem drivers in /etc/modprobe* files > Potentially useful modem drivers now loaded are: > > > If a USB modem or cellphone is attached and was not detected, please > provide available information in your request to discuss@xxxxxxxxxxxxx > > For candidate card in slot 01:01.0, firmware information and bootup > diagnostics are: > PCI slot PCI ID SubsystemID Name > ---------- --------- --------- -------------- > 01:01.0 1057:3052 1057:3020 Modem: Motorola Unknown device 3052 > > Modem interrupt assignment and sharing: > 16: 0 IO-APIC-fasteoi eth0 > --- Bootup diagnostics for card in PCI slot 01:01.0 ---- > [ 13.341341] ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 21 (level, > low) -> IRQ 16 > [ 13.341646] 0000:01:01.0: ttyS2 at I/O 0xc008 (irq = 16) is a 16450 > [ 13.341838] 0000:01:01.0: ttyS3 at I/O 0xc010 (irq = 16) is a 8250 > [ 13.341962] Couldn't register serial port 0000:01:01.0: -28 > > === Finished firmware and bootup diagnostics, next deducing cogent software. === > Completed candidate modem analyses. > > The base of the UDEV device file system is: /dev/.udev > > Versions adequately match for the compiler installed: 4.1.2 > and the compiler used in kernel assembly: 4.1.2 > > > > Minimal compiling resources appear complete: > make utility - /usr/bin/make > Compiler version 4.1 > linuc_headers base folder /lib/modules/2.6.20-15-generic/build > > However some compilations and executable functions may need additional files, > in the FileNames.h (so called kernel "h"eaders) collection installed > in /usr/include/ . > For martian_modem, additional required packages are needed. The also > required headers of package libc6 are commonly installed by default. > Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev > packages, for kernels 2.6.24 and later versions. > In not included on your install CD, search for them at > http://packages.ubuntu.com > or comparable Repository for other Linux distros. > When compiling ALSA drivers, the utility "patch" will also be needed. > > > > > If a driver compilation fails, with message including some lack of > some FileName.h (stdio.h for example), then > Some additional kernel-header files need installation to /usr/include. > The minimal additional packages are libc6-dev > and any of its dependents, under Ubuntu linux-libc-dev > > If an alternate ethernet connection is available, > $ apt-get update > $ apt-get -s install linux-kernel-devel > will install needed packages. > For Debian/Ubuntu related distributions, run the following command to > display the needed package list: > > Otherwise packages have to be found through http://packages.ubuntu.com > Once downloaded and transferred into a Linux partition, > they can be installed alltogether with: > $ sudo dpkg -i *.deb > > > Checking pppd properties: > -rwsr-xr-- 1 root dip 269224 2007-04-04 23:41 /usr/sbin/pppd > > In case of an "error 17" "serial loopback" problem, see: > http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html > > To enable dialout without Root permission do: > $ su - root (not for Ubuntu) > sudo chmod a+x /usr/sbin/pppd > or under Ubuntu related Linuxes > sudo chmod a+x /usr/sbin/pppd > > Checking settings of: /etc/ppp/options > asyncmap 0 > noauth > crtscts > lock > hide-password > modem > proxyarp > lcp-echo-interval 30 > lcp-echo-failure 4 > noipx > > In case of a message like: > Warning: Could not modify /etc/ppp/pap-secrets: Permission denied > see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html > > Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 eth0:avah > Which can interfere with Browser naviagation. > > Don't worry about the following, it is for experts should trouble > shooting be necessary. > ========================================================== > > Checking for modem support lines: > -------------------------------------- > /device/modem symbolic link: > slmodemd created symbolic link /dev/ttySL0: > Within /etc/udev/ files: > > Within /etc/modprobe.conf files: > /etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to > blacklist unwanted modem drivers > /etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem > /etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem > /etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2 > /etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2 > Within any ancient /etc/devfs files: > > Within ancient kernel 2.4.n /etc/module.conf files: > > --------- end modem support lines -------- > ------------------------------------------------------------------------------------------------------------------------------------- > > Awaiting reply > > akcmails@xxxxxxxxx >
