Didn't work, see what I did and the output:
aj@aj-desktop:~$ cd ./Desktop/agrsm-20090418/
aj@aj-desktop:~/Desktop/agrsm-20090418$ make clean
rm -fR agrsoftmodem.o serial26.o \
*.ko *.mod.* \
agrmodem.o agrserial.o serial26.o lib.o \
agrmodem.{o,ko,mod.{c,o}} \
agrserial.{o,ko,mod.{c,o}} \
Module.* modules.order \
.*.cmd .tmp_versions
aj@aj-desktop:~/Desktop/agrsm-20090418$ sudo find /usr/src/linux-headers-2.6.27-7-generic -name "*" -exec touch {} \;
[sudo] password for aj:
touch: cannot touch `/usr/src/linux-headers-2.6.27-7-generic/include/linux/linux': No such file or directory
touch: cannot touch `/usr/src/linux-headers-2.6.27-7-generic/include/asm-x86/asm-x86': No such file or directory
aj@aj-desktop:~/Desktop/agrsm-20090418$ sudo make install
make -C /lib/modules/2.6.27-7-generic/build M="/home/aj/Desktop/agrsm-20090418" modules_install
make[1]: Entering directory `/usr/src/linux-headers-2.6.27-7-generic'
DEPMOD 2.6.27-7-generic
make[1]: Leaving directory `/usr/src/linux-headers-2.6.27-7-generic'
if ! /sbin/modprobe -nq agrmodem.ko ; then /sbin/depmod -a; fi
aj@aj-desktop:~/Desktop/agrsm-20090418$ ls -l /dev/ttySAGR
lrwxrwxrwx 1 root root 12 2002-02-04 04:04 /dev/ttySAGR -> /dev/ttyAGS3
aj@aj-desktop:~/Desktop/agrsm-20090418$ sudo ln -s /dev/ttyAGS3 /dev/modem
ln: creating symbolic link `/dev/modem': File exists
aj@aj-desktop:~/Desktop/agrsm-20090418$ ls -l /dev/ttyAGS3 /dev/ttySAGR /dev/modem
lrwxrwxrwx 1 root root 12 2002-02-04 04:04 /dev/modem -> /dev/ttyAGS3
crw-rw---- 1 root dialout 62, 67 2002-02-04 04:05 /dev/ttyAGS3
lrwxrwxrwx 1 root root 12 2002-02-04 04:04 /dev/ttySAGR -> /dev/ttyAGS3
aj@aj-desktop:~/Desktop/agrsm-20090418$ sudo modprobe agrmodem
aj@aj-desktop:~/Desktop/agrsm-20090418$ sudo modprobe agrserial
aj@aj-desktop:~/Desktop/agrsm-20090418$ sudo wvdialconf
Editing `/etc/wvdial.conf'.
Scanning your serial ports for a modem.
ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S2 S3
ttySAGR<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttySAGR<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttySAGR<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Sorry, no modem was detected! Is it in use by another program?
Did you configure it properly with setserial?
Please read the FAQ at http://open.nit.ca/wiki/?WvDial
If you still have problems, send mail to <wvdial-list@xxxxxxxxxxxx>.
aj@aj-desktop:~/Desktop/agrsm-20090418$
--- On Mon, 6/1/09, Nikolay Zhuravlev <xxor@xxxxxxx> wrote:
> From: Nikolay Zhuravlev <xxor@xxxxxxx>
> Subject: Re: Re[2]: I had a problem during the compiling setp!
> To: "Rocky Rock" <xubuntu@xxxxxxxxx>
> Cc: olivares14031@xxxxxxxxx, discuss@xxxxxxxxxxxxx, marvin.stodolsky@xxxxxxxxx
> Date: Monday, June 1, 2009, 6:27 PM
> Another thing I noticed:
>
> <<<<
> aj@aj-desktop:~/Desktop/agrsm-20090418$ sudo ln -s
> /dev/ttyAGS3 /dev/ttySAGR
> ln: creating symbolic link `/dev/ttySAGR': File exists
> >>>>
>
> What does 'ls -l /dev/ttySAGR' say? Does it point to
> /dev/ttyAGS3?
> If not, force it with 'ln -sf':
>
> $ sudo ln -sf /dev/ttyAGS3 /dev/ttySAGR
>
> --
> WBR, Nikolay Zhuravlev
>
>
> Thus spake Rocky Rock (xubuntu@xxxxxxxxx):
>
> >
> > Still no luck :(
> >
> > see what I did please:
> >
> >
> > aj@aj-desktop:~$ cd ./Desktop/agrsm-20090418/
> > aj@aj-desktop:~/Desktop/agrsm-20090418$ make clean
> > make: Warning: File `Makefile' has modification time
> 2.3e+08 s in the future
> > rm -fR agrsoftmodem.o serial26.o \
> > *..ko *.mod.* \
> > agrmodem.o agrserial.o serial26.o
> lib.o \
> > agrmodem.{o,ko,mod.{c,o}} \
> > agrserial.{o,ko,mod.{c,o}} \
> > Module.* modules.order \
> > .*.cmd .tmp_versions
> > make: warning: Clock skew detected. Your
> build may be incomplete.
> > aj@aj-desktop:~/Desktop/agrsm-20090418$ find . -name
> "*" -exec touch {} \;
> > aj@aj-desktop:~/Desktop/agrsm-20090418$ find . -name
> "*" -exec touch {} \
> > >
> > aj@aj-desktop:~/Desktop/agrsm-20090418$ sudo make
> instal
> > [sudo] password for aj:
> > make: *** No rule to make target `instal'.
> Stop.
> > aj@aj-desktop:~/Desktop/agrsm-20090418$ sudo make
> install
> > make -C /lib/modules/2.6.27-7-generic/build
> M="/home/aj/Desktop/agrsm-20090418" modules_install
> > make[1]: Entering directory
> `/usr/src/linux-headers-2.6.27-7-generic'
> > make[1]: Warning: File
> `/usr/src/linux-headers-2.6.27-7-generic/arch/x86/Makefile_32.cpu'
> has modification time 2.1e+08 s in the future
> > make[2]: Warning: File `scripts/Kbuild.include' has
> modification time 2.1e+08 s in the future
> > make[2]: warning: Clock skew detected.
> Your build may be incomplete.
> > DEPMOD 2.6.27-7-generic
> > make[1]: warning: Clock skew detected.
> Your build may be incomplete.
> > make[1]: Leaving directory
> `/usr/src/linux-headers-2.6.27-7-generic'
> > if ! /sbin/modprobe -nq agrmodem.ko ; then
> /sbin/depmod -a; fi
> > aj@aj-desktop:~/Desktop/agrsm-20090418$ make clean
> > rm -fR agrsoftmodem.o serial26.o \
> > *.ko *.mod.* \
> > agrmodem.o agrserial.o serial26.o
> lib.o \
> > agrmodem.{o,ko,mod.{c,o}} \
> > agrserial.{o,ko,mod.{c,o}} \
> > Module.* modules.order \
> > .*.cmd .tmp_versions
> > aj@aj-desktop:~/Desktop/agrsm-20090418$ make
> > make -C /lib/modules/2.6.27-7-generic/build
> SUBDIRS=/home/aj/Desktop/agrsm-20090418 modules
> > make[1]: Entering directory
> `/usr/src/linux-headers-2.6.27-7-generic'
> > make[1]: Warning: File
> `/usr/src/linux-headers-2.6.27-7-generic/arch/x86/Makefile_32.cpu'
> has modification time 2.1e+08 s in the future
> > make[2]: Warning: File `scripts/Makefile.lib' has
> modification time 2.1e+08 s in the future
> > CC [M]
> /home/aj/Desktop/agrsm-20090418/agrsoftmodem.o
> > CC [M]
> /home/aj/Desktop/agrsm-20090418/lib.o
> > CC [M]
> /home/aj/Desktop/agrsm-20090418/serial26.o
> > /home/aj/Desktop/agrsm-20090418/serial26.c: In
> function ‘serial8250_get_mctrl’:
> > /home/aj/Desktop/agrsm-20090418/serial26.c:1371:
> warning: unused variable ‘flags’
> > /home/aj/Desktop/agrsm-20090418/serial26.c: In
> function ‘serial8250_config_port’:
> > /home/aj/Desktop/agrsm-20090418/serial26.c:2039:
> warning: unused variable ‘ret’
> > /home/aj/Desktop/agrsm-20090418/serial26.c: At top
> level:
> > /home/aj/Desktop/agrsm-20090418/serial26.c:2131:
> warning: initialization from incompatible pointer type
> > /home/aj/Desktop/agrsm-20090418/serial26.c:2132:
> warning: initialization from incompatible pointer type
> > /home/aj/Desktop/agrsm-20090418/serial26.c:1922:
> warning: ‘serial8250_request_rsa_resource’ defined but
> not used
> > LD [M]
> /home/aj/Desktop/agrsm-20090418/agrmodem.o
> > LD [M]
> /home/aj/Desktop/agrsm-20090418/agrserial.o
> > make[2]: warning: Clock skew detected.
> Your build may be incomplete.
> > Building modules, stage 2.
> > make[2]: Warning: File `scripts/Makefile.lib' has
> modification time 2.1e+08 s in the future
> > MODPOST 2 modules
> > WARNING: could not find
> /home/aj/Desktop/agrsm-20090418/.agrsm_core.o.cmd for
> /home/aj/Desktop/agrsm-20090418/agrsm_core.o
> > WARNING: modpost: Found 3 section mismatch(es).
> > To see full details build your kernel with:
> > 'make CONFIG_DEBUG_SECTION_MISMATCH=y'
> > CC
> /home/aj/Desktop/agrsm-20090418/agrmodem.mod.o
> > LD [M]
> /home/aj/Desktop/agrsm-20090418/agrmodem.ko
> > CC
> /home/aj/Desktop/agrsm-20090418/agrserial.mod.o
> > LD [M]
> /home/aj/Desktop/agrsm-20090418/agrserial.ko
> > make[2]: warning: Clock skew detected.
> Your build may be incomplete.
> > make[1]: warning: Clock skew detected.
> Your build may be incomplete.
> > make[1]: Leaving directory
> `/usr/src/linux-headers-2.6.27-7-generic'
> > aj@aj-desktop:~/Desktop/agrsm-20090418$ sudo make
> install
> > make -C /lib/modules/2.6...27-7-generic/build
> M="/home/aj/Desktop/agrsm-20090418" modules_install
> > make[1]: Entering directory
> `/usr/src/linux-headers-2.6.27-7-generic'
> > make[1]: Warning: File
> `/usr/src/linux-headers-2.6.27-7-generic/arch/x86/Makefile_32.cpu'
> has modification time 2.1e+08 s in the future
> > make[2]: Warning: File `scripts/Kbuild.include' has
> modification time 2.1e+08 s in the future
> > INSTALL
> /home/aj/Desktop/agrsm-20090418/agrmodem.ko
> > INSTALL
> /home/aj/Desktop/agrsm-20090418/agrserial.ko
> > make[2]: warning: Clock skew detected.
> Your build may be incomplete.
> > DEPMOD 2.6.27-7-generic
> > make[1]: warning: Clock skew detected.
> Your build may be incomplete.
> > make[1]: Leaving directory
> `/usr/src/linux-headers-2.6.27-7-generic'
> > if ! /sbin/modprobe -nq agrmodem.ko ; then
> /sbin/depmod -a; fi
> > aj@aj-desktop:~/Desktop/agrsm-20090418$ sudo modprobe
> agrmodem
> > aj@aj-desktop:~/Desktop/agrsm-20090418$ sudo modprobe
> agrserial
> > aj@aj-desktop:~/Desktop/agrsm-20090418$ ls -l
> /dev/ttyA*
> > crw-rw---- 1 root dialout 62, 67 2002-02-04 04:04
> /dev/ttyAGS3
> > aj@aj-desktop:~/Desktop/agrsm-20090418$ sudo ln -s
> /dev/ttyAGS3 /dev/ttySAGR
> > ln: creating symbolic link `/dev/ttySAGR': File
> exists
> > aj@aj-desktop:~/Desktop/agrsm-20090418$ sudo ln -s
> /dev/ttyAGS3 /dev/modem
> > aj@aj-desktop:~/Desktop/agrsm-20090418$ sudo
> wvdialconf
> > Editing `/etc/wvdial.conf'.
> >
> > Scanning your serial ports for a modem.
> >
> > ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud,
> next try: 9600 baud
> > ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud,
> next try: 115200 baud
> > ttyS0<*1>: ATQ0 V1 E1 -- and failed too at
> 115200, giving up.
> > ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud,
> next try: 9600 baud
> > ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud,
> next try: 115200 baud
> > ttyS1<*1>: ATQ0 V1 E1 -- and failed too at
> 115200, giving up.
> > Modem Port Scan<*1>:
> S2 S3
> > ttySAGR<*1>: ATQ0 V1 E1 -- failed with 2400
> baud, next try: 9600 baud
> > ttySAGR<*1>: ATQ0 V1 E1 -- failed with 9600
> baud, next try: 115200 baud
> > ttySAGR<*1>: ATQ0 V1 E1 -- and failed too at
> 115200, giving up.
> >
> >
> > Sorry, no modem was detected! Is it in use by
> another program?
> > Did you configure it properly with setserial?
> >
> > Please read the FAQ at http://open.nit.ca/wiki/?WvDial
> >
> > If you still have problems, send mail to <wvdial-list@xxxxxxxxxxxx>.
> > aj@aj-desktop:~/Desktop/agrsm-20090418$
> >
> >
> >
> > --- On Mon, 6/1/09, Nikolay Zhuravlev <xxor@xxxxxxx>
> wrote:
> >
> > > From: Nikolay Zhuravlev <xxor@xxxxxxx>
> > > Subject: Re[2]: I had a problem during the
> compiling setp!
> > > To: "Rocky Rock" <xubuntu@xxxxxxxxx>
> > > Cc: "Antonio Olivares" <olivares14031@xxxxxxxxx>,
> discuss@xxxxxxxxxxxxx,
> marvin.stodolsky@xxxxxxxxx
> > > Date: Monday, June 1, 2009, 3:36 PM
> > > There seems to be no error.
> > >
> > > 'make clean' and run 'touch' on all the sources
> in that
> > > directory:
> > >
> > > find . -name "*" -exec touch {} \;
> > >
> > > Then make it again.
> > >
> > > --
> > > WBR, Nikolay Zhuravlev
> > >
> > > -----Original Message-----
> > >
> > > >
> > > > No luck, I got errors:
> > > >
> > > > aj@aj-desktop:~$ cd ./Desktop/agr
> > > > agr/
> > > agrsm-20090418/
> > > > aj@aj-desktop:~$ cd
> ./Desktop/agrsm-20090418/
> > > > aj@aj-desktop:~/Desktop/agrsm-20090418$ make
> clean
> > > > make: Warning: File `Makefile' has
> modification time
> > > 2.3e+08 s in the future
> > > > rm -fR agrsoftmodem.o serial26.o \
> > > > *.ko *.mod.* \
> > > > agrmodem.o agrserial.o serial26.o
> > > lib.o \
> > > > agrmodem.{o,ko,mod.{c,o}} \
> > > > agrserial.{o,ko,mod.{c,o}} \
> > > > Module.* modules.order \
> > > > .*.cmd .tmp_versions
> > > > make: warning: Clock skew detected.
> Your
> > > build may be incomplete.
> > > > aj@aj-desktop:~/Desktop/agrsm-20090418$ make
> all
> > > > make: Warning: File `Makefile' has
> modification time
> > > 2.3e+08 s in the future
> > > > make -C /lib/modules/2.6.27-7-generic/build
> > > SUBDIRS=/home/aj/Desktop/agrsm-20090418 modules
> > > > make[1]: Entering directory
> > > `/usr/src/linux-headers-2.6.27-7-generic'
> > > > make[1]: Warning: File
> > >
> `/usr/src/linux-headers-2.6.27-7-generic/arch/x86/Makefile_32.cpu'
> > > has modification time 2.1e+08 s in the future
> > > > make[2]: Warning: File
> `scripts/Makefile.lib' has
> > > modification time 2..1e+08 s in the future
> > > > CC [M]
> > > /home/aj/Desktop/agrsm-20090418/agrsoftmodem.o
> > > > CC [M]
> > > /home/aj/Desktop/agrsm-20090418/lib.o
> > > > CC [M]
> > > /home/aj/Desktop/agrsm-20090418/serial26.o
> > > > /home/aj/Desktop/agrsm-20090418/serial26.c:
> In
> > > function serial8250_get_mctrl':
> > > >
> /home/aj/Desktop/agrsm-20090418/serial26.c:1371:
> > > warning: unused variable flags'
> > > > /home/aj/Desktop/agrsm-20090418/serial26.c:
> In
> > > function serial8250_config_port':
> > > >
> /home/aj/Desktop/agrsm-20090418/serial26.c:2039:
> > > warning: unused variable ret'
> > > > /home/aj/Desktop/agrsm-20090418/serial26.c:
> At top
> > > level:
> > > >
> /home/aj/Desktop/agrsm-20090418/serial26.c:2131:
> > > warning: initialization from incompatible pointer
> type
> > > >
> /home/aj/Desktop/agrsm-20090418/serial26.c:2132:
> > > warning: initialization from incompatible pointer
> type
> > > >
> /home/aj/Desktop/agrsm-20090418/serial26.c:1922:
> > > warning: serial8250_request_rsa_resource'
> defined but
> > > not used
> > > > LD [M]
> > > /home/aj/Desktop/agrsm-20090418/agrmodem.o
> > > > LD [M]
> > > /home/aj/Desktop/agrsm-20090418/agrserial.o
> > > > make[2]: warning: Clock skew detected.
> > > Your build may be incomplete..
> > > > Building modules, stage 2.
> > > > make[2]: Warning: File
> `scripts/Makefile.lib' has
> > > modification time 2.1e+08 s in the future
> > > > MODPOST 2 modules
> > > > WARNING: could not find
> > > /home/aj/Desktop/agrsm-20090418/.agrsm_core..o.cmd
> for
> > > /home/aj/Desktop/agrsm-20090418/agrsm_core.o
> > > > WARNING: modpost: Found 3 section
> mismatch(es).
> > > > To see full details build your kernel with:
> > > > 'make CONFIG_DEBUG_SECTION_MISMATCH=y'
> > > > CC
> > > /home/aj/Desktop/agrsm-20090418/agrmodem.mod.o
> > > > LD [M]
> > > /home/aj/Desktop/agrsm-20090418/agrmodem.ko
> > > > CC
> > > /home/aj/Desktop/agrsm-20090418/agrserial.mod.o
> > > > LD [M]
> > > /home/aj/Desktop/agrsm-20090418/agrserial.ko
> > > > make[2]: warning: Clock skew detected.
> > > Your build may be incomplete.
> > > > make[1]: warning: Clock skew detected.
> > > Your build may be incomplete.
> > > > make[1]: Leaving directory
> > > `/usr/src/linux-headers-2.6.27-7-generic'
> > > > make: warning: Clock skew detected.
> Your
> > > build may be incomplete.
> > > > aj@aj-desktop:~/Desktop/agrsm-20090418$ sudo
> make
> > > install
> > > > [sudo] password for aj:
> > > > make: Warning: File `Makefile' has
> modification time
> > > 2.3e+08 s in the future
> > > > make -C /lib/modules/2.6.27-7-generic/build
> > > M="/home/aj/Desktop/agrsm-20090418"
> modules_install
> > > > make[1]: Entering directory
> > > `/usr/src/linux-headers-2.6.27-7-generic'
> > > > make[1]: Warning: File
> > >
> `/usr/src/linux-headers-2.6.27-7-generic/arch/x86/Makefile_32.cpu'
> > > has modification time 2.1e+08 s in the future
> > > > make[2]: Warning: File
> `scripts/Kbuild.include' has
> > > modification time 2.1e+08 s in the future
> > > > INSTALL
> > > /home/aj/Desktop/agrsm-20090418/agrmodem.ko
> > > > INSTALL
> > > /home/aj/Desktop/agrsm-20090418/agrserial.ko
> > > > make[2]: warning: Clock skew detected.
> > > Your build may be incomplete.
> > > > DEPMOD 2.6.27-7-generic
> > > > make[1]: warning: Clock skew detected.
> > > Your build may be incomplete.
> > > > make[1]: Leaving directory
> > > `/usr/src/linux-headers-2.6.27-7-generic'
> > > > if ! /sbin/modprobe -nq agrmodem.ko ; then
> > > /sbin/depmod -a; fi
> > > > make: warning: Clock skew detected.
> Your
> > > build may be incomplete.
> > > > aj@aj-desktop:~/Desktop/agrsm-20090418$
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > --- On Mon, 6/1/09, Antonio Olivares <olivares14031@xxxxxxxxx>
> > > wrote:
> > > >
> > > > > From: Antonio Olivares <olivares14031@xxxxxxxxx>
> > > > > Subject: Re: I had a problem during the
> compiling
> > > setp!
> > > > > To: "Rocky Rock" <xubuntu@xxxxxxxxx>
> > > > > Cc: discuss@xxxxxxxxxxxxx,
> > > marvin.stodolsky@xxxxxxxxx
> > > > > Date: Monday, June 1, 2009, 12:11 PM
> > > > > instead of running make install,
> > > > >
> > > > > run first
> > > > > $ make clean
> > > > > $ make all
> > > > > $ sudo make install
> > > > >
> > > > > If something does not work, please
> report back.
> > > > >
> > > > > Regards,
> > > > >
> > > > > Antonio
> > > > >
> > > > > On Mon, Jun 1, 2009 at 6:07 AM, Rocky
> Rock <xubuntu@xxxxxxxxx>
> > > > > wrote:
> > > > > >
> > > > > > Hi guys, I sent you the
> ModemData.txt file
> > > in a
> > > > > previous mail.
> > > > > >
> > > > > > Look what I did and please check
> the error I
> > > got
> > > > > during the compiling step:
> > > > > >
> > > > > > 1- I downloaded
> agrsm-20090418.tar.gz
> > > > > > 2- Unpack it
> > > > > > 3- I opened the terminal and
> browsed to
> > > agrsm-20090418
> > > > > directory
> > > > > > 4- Then I wrote this command: sudo
> make
> > > install
> > > > > >
> > > > > > then I got this error:
> > > > > >
> > > > > > aj@aj-desktop:~$ cd
> > > ./Desktop/agrsm-20090418/
> > > > > >
> aj@aj-desktop:~/Desktop/agrsm-20090418$ sudo
> > > make
> > > > > install
> > > > > > [sudo] password for aj:
> > > > > > make: Warning: File `Makefile'
> has
> > > modification time
> > > > > 2.3e+08 s in the future
> > > > > > make -C
> /lib/modules/2.6.27-7-generic/build
> > > > > M="/home/aj/Desktop/agrsm-20090418"
> > > modules_install
> > > > > > make[1]: Entering directory
> > > > >
> `/usr/src/linux-headers-2.6.27-7-generic'
> > > > > > make[1]: Warning: File
> > > > >
> > >
> `/usr/src/linux-headers-2.6.27-7-generic/arch/x86/Makefile_32.cpu'
> > > > > has modification time 2.1e+08 s in the
> future
> > > > > > make[2]: Warning: File
> > > `scripts/Kbuild.include' has
> > > > > modification time 2.1e+08 s in the
> future
> > > > > > ?INSTALL
> > > /home/aj/Desktop/agrsm-20090418/agrmodem.ko
> > > > > > ?INSTALL
> > > > >
> /home/aj/Desktop/agrsm-20090418/agrserial.ko
> > > > > > make[2]: warning: ?Clock skew
> detected.
> > > ?Your build
> > > > > may be incomplete.
> > > > > > ?DEPMOD ?2.6.27-7-generic
> > > > > > make[1]: warning: ?Clock skew
> detected.
> > > ?Your build
> > > > > may be incomplete.
> > > > > > make[1]: Leaving directory
> > > > >
> `/usr/src/linux-headers-2.6.27-7-generic'
> > > > > > if ! /sbin/modprobe -nq
> agrmodem.ko ; then
> > > > > /sbin/depmod -a; fi
> > > > > > make: warning: ?Clock skew
> detected. ?Your
> > > build may
> > > > > be incomplete.
> > > > > >
> aj@aj-desktop:~/Desktop/agrsm-20090418$
> > > > > >
> > > > > > Please tell me if I did anything
> wrong or I
> > > missed
> > > > > some steps. Also please tell me if
> there are any
> > > errors that
> > > > > I might encounter after this error.
> > > > > >
> > > > > > All the best.
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > >
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> >
> >
> >
>
