Giuseppe D'Amico, Italy, kernel 2.6.28-11-server

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi, I would like to know how to activate my modem, but I have no idea at all how to do it can you help me please? thanks in advance,
Giuseppe
 Only plain text email is forwarded by the  Discuss@xxxxxxxxxxxxx List Server,
 as HTML can contain viruses. Use as the email Subject Line:
           YourName, YourCountry  kernel 2.6.28-11-server 
 With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
 YourCountry will enable Country specific guidance. Linux experts in YourCountry 
 can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
 So in a day, also check the Archived responses at http://www.linmodems.org 
--------------------------  System information ----------------------------
CPU=i686,  
Linux version 2.6.28-11-server (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 02:48:10 UTC 2009
 scanModem update of:  2009_05_12

 There are no blacklisted modem drivers in /etc/modprobe*  files 
 Potentially useful modem drivers now loaded are:
         snd_hda_intel       

Attached USB devices are:
 ID 04cf:8818 Myson Century, Inc. USB2.0 to ATAPI Bridge Controller
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html

If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx

For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
 PCI slot	PCI ID		SubsystemID	Name
 ----------	---------	---------	--------------
 00:1b.0	8086:27d8	1179:ff02	Audio device: Intel Corporation 82801G 

 Modem interrupt assignment and sharing: 
 22:      29930          0   IO-APIC-fasteoi   HDA Intel
 --- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[    0.771325] pci 0000:00:1b.0: reg 10 64bit mmio: [0xdc440000-0xdc443fff]
[    0.771369] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.771374] pci 0000:00:1b.0: PME# disabled
[   13.752631] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   13.752709] HDA Intel 0000:00:1b.0: setting latency timer to 64

 The PCI slot 00:1b.0 of the modem card may be disabled early in 
 a bootup process,  but then enabled later. If modem drivers load 
 but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
 Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
 if help is needed.
 


===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== 
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.

The ALSA verion is 1.0.18
The modem cards detected by "aplay -l"  are: None


The /proc/asound/pcm file reports:
-----------------------
00-00: ALC861VD Analog : ALC861VD Analog : playback 1 : capture 1

about /proc/asound/cards:
------------------------
 0 [Intel          ]: HDA-Intel - HDA Intel
                      HDA Intel at 0xdc440000 irq 22

 PCI slot 00:1b.0 has a High Definition Audio Card
 The drivers are in the kernel modules tree at:
 /lib/modules/2.6.28-11-server/kernel/sound/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.28-3-rt/kernel/sound/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.28-11-generic/kernel/sound/pci/hda/snd-hda-intel.ko
 The modem codec file for the HDA card is: /proc/asound/card0/codec#1
--------------------------------------------------------
Codec: LSI ID 1040
Address: 1
Vendor Id: 0x11c11040
Subsystem Id: 0x11790001
Revision Id: 0x100200
Modem Function Group: 0x1

 The audio card hosts a softmodem chip:  0x11c11040
If not a Conexant modem, the driver agrsm with its dependent drivers:

----------
provide audio + modem support with the modem chip residing on the subsystem.
Any particular card can host any one of several soft modem chips. 

=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

Predictive  diagnostics for card in bus 00:1b.0:
	Modem chipset  detected on
NAME="Audio device: Intel Corporation 82801G "
CLASS=0403
PCIDEV=8086:27d8
SUBSYS=1179:ff02
IRQ=22
HDA=8086:27d8
SOFT=8086:27d8.HDA
CHIP=0x11c11040
IDENT=agrsm
Driver=agrsm

 For candidate modem in:  00:1b.0
   0403 Audio device: Intel Corporation 82801G 
      Primary device ID:  8086:27d8
    Subsystem PCI_id  1179:ff02 
    Softmodem codec or chipset from diagnostics: 0x11c11040
                               from    Archives: 
                        The HDA card softmodem chip is 0x11c11040
      

Support type needed or chipset:	agrsm


Writing DOCs/Intel.txt

The AgereSystems/LSI agrsm code supports compiling of a agrmodem + agrsm driver pair.
One resource site is http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
Thereat get the agrsm-howto.txt, through the compiling steps are only cogent to modems
with 11c1:0260, 11c1:048c and 11c1:048f chips. They use the agrsm-20090418.tar.gz package.
If your Distro uses Debian packages, also get the agrsm-tools.deb package.

For AgereSystems/LSI 11c11040 chip hosted on High Definition Audio cards, your Linux 
Distro's dkms package should be first installed, as it directs the installation of modem 
specific dkms-agrsm resources. For an example of what to expect, read http://linmodems.technion.ac.il/bigarch/archive-eighth/msg03863.html

The primary dkms-agrsm resource site is http://linux.zsolttech.com/linmodem/agrsm/
whereat a few differnt packaging types are available. For your convenience
dkms-agrsm-CurrentVersion.deb are also available at to http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ 
The .deb packages can be manually installed by:
$ sudo dpkg -i dkms*.deb agrsm*.deb
which will sequentially process dkms, dkms-agrsm and the agrsm-tools packages.

Read the DOCs/Agrsm.txt for details.

-------------- end Agere Systems section -------------------

 Completed candidate modem analyses.

 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.3.3
             and the compiler used in kernel assembly: 4.3.3


 
 Minimal compiling resources appear complete:
   make utility - /usr/bin/make
   Compiler version 4.3
   linuc_headers base folder /lib/modules/2.6.28-11-server/build

 However some compilations and executable functions may need additional files,
 in the FileNames.h (so called kernel "h"eaders) collection installed in  /usr/include/ .
 For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default. 
 Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
 In not included on your install CD, search for them at http://packages.ubuntu.com
 or comparable Repository for other Linux distros.
 When compiling ALSA drivers, the utility "patch" will also be needed.


Compressed files at: /usr/src/atl2.tar.bz2 /usr/src/gspca.tar.bz2 /usr/src/qc-usb.tar.bz2


If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb


Checking pppd properties:
	-rwsr-xr-- 1 root dip 277352 2009-02-20 18:25 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
    http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
	$ su - root  (not for Ubuntu)
        sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
	sudo chmod a+x /usr/sbin/pppd

Checking settings of:	/etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 wlan0
Which can interfere with Browser naviagation.

 Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================

 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:   
slmodemd created symbolic link /dev/ttySL0:  
     Within /etc/udev/ files:

     Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------


[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux