Thanks Nikolay, I applied the patch and it does indeed compile: [olivares@localhost agrsm-20090502]$ make make -C /lib/modules/2.6.29.3-60.fc10.i686.PAE/build SUBDIRS=/home/olivares/Download/agrsm/agrsm-20090502 modules make[1]: Entering directory `/usr/src/kernels/2.6.29.3-60.fc10.i686.PAE' CC [M] /home/olivares/Download/agrsm/agrsm-20090502/agrsoftmodem.o CC [M] /home/olivares/Download/agrsm/agrsm-20090502/lib.o CC [M] /home/olivares/Download/agrsm/agrsm-20090502/serial26.o /home/olivares/Download/agrsm/agrsm-20090502/serial26.c: In function ‘serial8250_get_mctrl’: /home/olivares/Download/agrsm/agrsm-20090502/serial26.c:1371: warning: unused variable ‘flags’ /home/olivares/Download/agrsm/agrsm-20090502/serial26.c: In function ‘serial8250_config_port’: /home/olivares/Download/agrsm/agrsm-20090502/serial26.c:2039: warning: unused variable ‘ret’ /home/olivares/Download/agrsm/agrsm-20090502/serial26.c: At top level: /home/olivares/Download/agrsm/agrsm-20090502/serial26.c:2131: warning: initialization from incompatible pointer type /home/olivares/Download/agrsm/agrsm-20090502/serial26.c:2132: warning: initialization from incompatible pointer type /home/olivares/Download/agrsm/agrsm-20090502/serial26.c:1922: warning: ‘serial8250_request_rsa_resource’ defined but not used LD [M] /home/olivares/Download/agrsm/agrsm-20090502/agrmodem.o LD [M] /home/olivares/Download/agrsm/agrsm-20090502/agrserial.o Building modules, stage 2. MODPOST 2 modules WARNING: could not find /home/olivares/Download/agrsm/agrsm-20090502/.agrsm_core.o.cmd for /home/olivares/Download/agrsm/agrsm-20090502/agrsm_core.o WARNING: modpost: Found 3 section mismatch(es). To see full details build your kernel with: 'make CONFIG_DEBUG_SECTION_MISMATCH=y' CC /home/olivares/Download/agrsm/agrsm-20090502/agrmodem.mod.o LD [M] /home/olivares/Download/agrsm/agrsm-20090502/agrmodem.ko CC /home/olivares/Download/agrsm/agrsm-20090502/agrserial.mod.o LD [M] /home/olivares/Download/agrsm/agrsm-20090502/agrserial.ko make[1]: Leaving directory `/usr/src/kernels/2.6.29.3-60.fc10.i686.PAE' I did not run make install because this computer has a smartlink modem, but this will go a long way for users with these chipsets. Regards, Antonio 2009/5/16 Nikolay Zhuravlev <xxor@xxxxxxx>: > Marvin, > > Ok, I see where the problem is. Here is the patch updated for 2.6.28 along with > some further improvements. This time it is against the > agrsm-2.1.80-6mdv2009.0.tar.gz sources tarball you sent me on May 14. > > I have installed 2.6.28.10 and built the driver successfully. The wvdialconf > runs fine, too. > > I am not sure what 2.6.28.11 is, I couldn't find it on ftp.kernel.org. I hope > it is close enough to 2.6.28.10. > > -- > WBR, Nikolay Zhuravlev > > Thus spake Marvin Stodolsky (marvin.stodolsky@xxxxxxxxx): > >> Nikolay, >> >> There is the problem below under Ubuntu 2.6.28-11-generic , last >> paragraph below. >> >> However the compile is OK with your prior patch applied to >> agrsm-2.1.80-6mdv2009.0, resulting in the >> agrsm-2.1.80-6mdv2009.0.tar.gz, I sent you earlier. >> >> MarvS >> >> $ patch -p0 < 4mdv_2.6.29.1.patch >> patching file agrsm-2.1.80-4mdv2009.0/agrsoftmodem.c >> patching file agrsm-2.1.80-4mdv2009.0/HDA.c >> patching file agrsm-2.1.80-4mdv2009.0/hda_codec.h >> patching file agrsm-2.1.80-4mdv2009.0/Kbuild >> patching file agrsm-2.1.80-4mdv2009.0/Makefile >> >> agrsm-2.1.80-4mdv2009.0$ make >> make -C /lib/modules/2.6.28-11-generic/build >> M=/usr/src/pkg/agrsm/agrsm-2.1.80-4mdv2009.0 modules >> make[1]: Entering directory `/usr/src/linux-headers-2.6.28-11-generic' >> CC [M] /usr/src/pkg/agrsm/agrsm-2.1.80-4mdv2009.0/agrsoftmodem.o >> /usr/src/pkg/agrsm/agrsm-2.1.80-4mdv2009.0/agrsoftmodem.c: In function >> ‘x_request_region’: >> /usr/src/pkg/agrsm/agrsm-2.1.80-4mdv2009.0/agrsoftmodem.c:276: error: >> too many arguments to function ‘__request_region’ >> make[2]: *** [/usr/src/pkg/agrsm/agrsm-2.1.80-4mdv2009.0/agrsoftmodem.o] Error 1 >> make[1]: *** [_module_/usr/src/pkg/agrsm/agrsm-2.1.80-4mdv2009.0] Error 2 >> make[1]: Leaving directory `/usr/src/linux-headers-2.6.28-11-generic' >> make: *** [default] Error 2 >> >> >> On Sat, May 16, 2009 at 8:52 AM, Nikolay Zhuravlev <xxor@xxxxxxx> wrote: >> > Bjorn/All, >> > >> > I played with the source a bit more this morning. This is the patch against >> > the agrsm-2.1.80-4mdv2009.0.tgz sources available at the Zsolt's site. >> > >> > It does two things: >> > (1) Adds support for the 2.6.27-rc9, 2.6.29.1 (and maybe 2.6.28) kernel >> > (2) Changes the Makefile to use the standard 2.6 kbuild procedure >> > used for the linux modules [described in Documentation/kbuild/modules.txt] >> > >> > Before applying the patch and running make, please rename the file >> > agrmodemlib.o to agrmodemlib.o_shipped . This will help the kbuild >> > to recognize this is a pre-build binary coming from elsewhere, >> > so that 'make clean' will not destroy it. >> > >> > After the patch, build & install like this: >> > >> > $ sudo modprobe -r agrserial >> > $ sudo modprobe -r agrmodem >> > $ make >> > $ sudo make modules_install >> > $ sudo modprobe agrmodem >> > $ sudo modprobe agrserial >> > $ sudo ln -s /dev/ttyAGS3 /dev/ttySAGR >> > $ sudo wvdialconf /etc/wvdial.conf >> > >> > wvdialconf was successful on my notebook that has the 11c11040 chip on HDA, but >> > I cannot test beyond that -- I don't have an actual phone line here. >> > >> > -- >> > WBR, Nikolay Zhuravlev >> > >> > Thus spake Bjorn Wielens (Uniacke1@xxxxxxxx): >> > >> >> Hi, >> >> Zsolt's sources are confirmed to work with 2.6.27 kernels. >> >> However, we are still unsure about 2.6.28, and I will be able to try and >> >> experiment with 2.6.29 as soon as I can locate the correct packages for >> >> my distro. >> >> You are likely correct about the problem, but there may be other issues >> >> as well. >> >> Bjorn. >> >> >> >> >> >> >> >> >> >> Nikolay Zhuravlev wrote: >> >> > Antonio, >> >> > >> >> > Those sources are too old to work with the kernels >= 2.6.27 >> >> > >> >> > You may want to have a look at the sources located at >> >> > http://linux.zsolttech.com/linmodem/agrsm/ and hack those with >> >> > the patch I attach here. I used it to get the driver working >> >> > with the 2.6.27-rc9 kernel. >> >> > Note that the patched sources may build and still not work with >> >> > the recent kernels (28 and higher). >> >> > >> >> > I guess the HDA.c stuff in that driver is out of sync with >> >> > the current ALSA developments in the 29 kernel anyway. >> >> > >> >> > >> >> >> > >> > >> > >
