Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.27-7-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686,
Linux version 2.6.27-7-generic (buildd@rothera) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu10) ) #1 SMP Fri Oct 24 06:42:44 UTC 2008
scanModem update of: 2009_04_28
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
Attached USB devices are:
ID 046d:c016 Logitech, Inc. M-UV69a/HP M-UV96 Optical Wheel Mouse
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx
For candidate card in slot 00:02.6, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:02.6 1039:7013 1043:1736 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller
Modem interrupt assignment and sharing:
18: 1253 IO-APIC-fasteoi SiS SI7012
--- Bootup diagnostics for card in PCI slot 00:02.6 ----
[ 0.456825] PCI: 0000:00:02.6 reg 10 io port: [b400, b4ff]
[ 0.456833] PCI: 0000:00:02.6 reg 14 io port: [b000, b07f]
[ 0.456880] pci 0000:00:02.6: supports D1
[ 0.456882] pci 0000:00:02.6: supports D2
[ 0.456884] pci 0000:00:02.6: PME# supported from D3hot D3cold
[ 0.456889] pci 0000:00:02.6: PME# disabled
[ 1.709469] serial 0000:00:02.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.709480] serial 0000:00:02.6: PCI INT C disabled
The PCI slot 00:02.6 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
------------------------------------------------------------------------
CPU0
0: 47565 IO-APIC-edge timer
1: 44 IO-APIC-edge i8042
3: 2 IO-APIC-edge
6: 0 IO-APIC-edge wbsd
7: 0 IO-APIC-edge parport0
8: 2 IO-APIC-edge rtc0
12: 119 IO-APIC-edge i8042
14: 17288 IO-APIC-edge pata_sis
15: 0 IO-APIC-edge pata_sis
16: 1 IO-APIC-fasteoi yenta
17: 2 IO-APIC-fasteoi ohci1394
18: 1253 IO-APIC-fasteoi SiS SI7012
19: 0 IO-APIC-fasteoi eth0
20: 0 IO-APIC-fasteoi acpi, ohci_hcd:usb1
21: 0 IO-APIC-fasteoi ohci_hcd:usb2
22: 12742 IO-APIC-fasteoi ohci_hcd:usb3
23: 2 IO-APIC-fasteoi ehci_hcd:usb4
NMI: 0 Non-maskable interrupts
LOC: 25528 Local timer interrupts
RES: 0 Rescheduling interrupts
CAL: 0 function call interrupts
TLB: 0 TLB shootdowns
SPU: 0 Spurious interrupts
ERR: 0
MIS: 0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.27-7-generic (buildd@rothera) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu10) ) #1 SMP Fri Oct 24 06:42:44 UTC 2008 (Ubuntu 2.6.27-7.14-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001dffb000 (usable)
[ 0.000000] BIOS-e820: 000000001dffb000 - 000000001dfff000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001dfff000 - 000000001e000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] last_pfn = 0x1dffb max_arch_pfn = 0x100000
[ 0.000000] kernel direct mapping tables up to 1dffb000 @ 7000-d000
[ 0.000000] RAMDISK: 1d81f000 - 1dfeaf0b
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP 000F6470, 0014 (r0 ASUS )
[ 0.000000] ACPI: RSDT 1DFFB000, 0030 (r1 ASUS A2H/L 42302E31 MSFT 31313031)
[ 0.000000] ACPI: FACP 1DFFB0C0, 0074 (r1 ASUS A2H/L 42302E31 MSFT 31313031)
[ 0.000000] ACPI: DSDT 1DFFB134, 3B9E (r1 ASUS A2H/L 1000 MSFT 100000E)
[ 0.000000] ACPI: FACS 1DFFF000, 0040
[ 0.000000] ACPI: BOOT 1DFFB030, 0028 (r1 ASUS A2H/L 42302E31 MSFT 31313031)
[ 0.000000] ACPI: APIC 1DFFB058, 005A (r1 ASUS A2H/L 42302E31 MSFT 31313031)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 479MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1dffb000
[ 0.000000] low ram: 00000000 - 1dffb000
[ 0.000000] bootmap 00002000 - 00005c00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 001dffb000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00005c0a20] TEXT DATA BSS ==> [0000100000 - 00005c0a20]
[ 0.000000] #4 [001d81f000 - 001dfeaf0b] RAMDISK ==> [001d81f000 - 001dfeaf0b]
[ 0.000000] #5 [00005c1000 - 00005c4000] INIT_PG_TABLE ==> [00005c1000 - 00005c4000]
[ 0.000000] #6 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #7 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
[ 0.000000] #8 [0000002000 - 0000006000] BOOTMAP ==> [0000002000 - 0000006000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0001dffb
[ 0.000000] HighMem 0x0001dffb -> 0x0001dffb
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0001dffb
[ 0.000000] On node 0 totalpages: 122778
[ 0.000000] free_area_init_node: node 0, pgdat c048a500, node_mem_map c1000000
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 117735 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0xe408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 128, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 1e000000:e0c00000)
[ 0.000000] PERCPU: Allocating 41628 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121698
[ 0.000000] Kernel command line: root=UUID=81d0b9be-51bf-4cdc-ae88-f66a69843e16 ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] TSC: PIT calibration confirmed by PMTIMER.
[ 0.000000] TSC: using PMTIMER calibration value
[ 0.000000] Detected 2655.874 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.004000] Memory: 473156k/491500k available (2572k kernel code, 17672k reserved, 1160k data, 424k init, 0k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xde800000 - 0xff3fe000 ( 523 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xddffb000 ( 479 MB)
[ 0.004000] .init : 0xc04ab000 - 0xc0515000 ( 424 kB)
[ 0.004000] .data : 0xc038329a - 0xc04a5680 (1160 kB)
[ 0.004000] .text : 0xc0100000 - 0xc038329a (2572 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.004014] Calibrating delay loop (skipped), value calculated using timer frequency.. 5311.74 BogoMIPS (lpj=10623496)
[ 0.004040] Security Framework initialized
[ 0.004051] SELinux: Disabled at boot.
[ 0.004078] AppArmor: AppArmor initialized
[ 0.004093] Mount-cache hash table entries: 512
[ 0.004329] Initializing cgroup subsys ns
[ 0.004336] Initializing cgroup subsys cpuacct
[ 0.004339] Initializing cgroup subsys memory
[ 0.004362] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.004367] CPU: L2 cache: 512K
[ 0.004370] CPU: Hyper-Threading is disabled
[ 0.004392] Checking 'hlt' instruction... OK.
[ 0.020644] SMP alternatives: switching to UP code
[ 0.028039] Freeing SMP alternatives: 11k freed
[ 0.028045] ACPI: Core revision 20080609
[ 0.032211] ACPI: Checking initramfs for custom DSDT
[ 0.388209] ENABLING IO-APIC IRQs
[ 0.388401] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.428470] CPU0: Intel(R) Pentium(R) 4 CPU 2.66GHz stepping 09
[ 0.432027] Brought up 1 CPUs
[ 0.432027] Total of 1 processors activated (5311.74 BogoMIPS).
[ 0.432027] CPU0 attaching sched-domain:
[ 0.432027] domain 0: span 0 level CPU
[ 0.432027] groups: 0
[ 0.432027] net_namespace: 840 bytes
[ 0.432027] Booting paravirtualized kernel on bare hardware
[ 0.432027] Time: 11:56:56 Date: 05/13/09
[ 0.432027] NET: Registered protocol family 16
[ 0.432027] EISA bus registered
[ 0.432027] ACPI: bus type pci registered
[ 0.432027] PCI: PCI BIOS revision 2.10 entry at 0xf1740, last bus=1
[ 0.432027] PCI: Using configuration type 1 for base access
[ 0.433619] ACPI: EC: Look up EC in DSDT
[ 0.443388] ACPI: Interpreter enabled
[ 0.443395] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.443421] ACPI: Using IOAPIC for interrupt routing
[ 0.456238] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.456362] PCI: 0000:00:00.0 reg 10 32bit mmio: [e8000000, ebffffff]
[ 0.456520] pci 0000:00:02.0: Enabling SiS 96x SMBus
[ 0.456570] PCI: 0000:00:02.1 reg 20 io port: [e600, e61f]
[ 0.456626] PCI: 0000:00:02.3 reg 10 32bit mmio: [e7000000, e7000fff]
[ 0.456665] PCI: 0000:00:02.3 reg 30 32bit mmio: [0, 1ffff]
[ 0.456684] pci 0000:00:02.3: supports D1
[ 0.456686] pci 0000:00:02.3: supports D2
[ 0.456688] pci 0000:00:02.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.456695] pci 0000:00:02.3: PME# disabled
[ 0.456754] PCI: 0000:00:02.5 reg 20 io port: [b800, b80f]
[ 0.456784] pci 0000:00:02.5: PME# supported from D3cold
[ 0.456790] pci 0000:00:02.5: PME# disabled
[ 0.456825] PCI: 0000:00:02.6 reg 10 io port: [b400, b4ff]
[ 0.456833] PCI: 0000:00:02.6 reg 14 io port: [b000, b07f]
[ 0.456880] pci 0000:00:02.6: supports D1
[ 0.456882] pci 0000:00:02.6: supports D2
[ 0.456884] pci 0000:00:02.6: PME# supported from D3hot D3cold
[ 0.456889] pci 0000:00:02.6: PME# disabled
[ 0.456924] PCI: 0000:00:02.7 reg 10 io port: [a800, a8ff]
[ 0.456933] PCI: 0000:00:02.7 reg 14 io port: [a400, a47f]
[ 0.456980] pci 0000:00:02.7: supports D1
[ 0.456983] pci 0000:00:02.7: supports D2
[ 0.456985] pci 0000:00:02.7: PME# supported from D3hot D3cold
[ 0.456990] pci 0000:00:02.7: PME# disabled
[ 0.457024] PCI: 0000:00:03.0 reg 10 32bit mmio: [e6800000, e6800fff]
[ 0.457076] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.457081] pci 0000:00:03.0: PME# disabled
[ 0.457115] PCI: 0000:00:03.1 reg 10 32bit mmio: [e6000000, e6000fff]
[ 0.457165] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[ 0.457171] pci 0000:00:03.1: PME# disabled
[ 0.457204] PCI: 0000:00:03.2 reg 10 32bit mmio: [e5800000, e5800fff]
[ 0.457255] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
[ 0.457260] pci 0000:00:03.2: PME# disabled
[ 0.457293] PCI: 0000:00:03.3 reg 10 32bit mmio: [e5000000, e5000fff]
[ 0.457344] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
[ 0.457349] pci 0000:00:03.3: PME# disabled
[ 0.457390] PCI: 0000:00:04.0 reg 10 io port: [a000, a0ff]
[ 0.457398] PCI: 0000:00:04.0 reg 14 32bit mmio: [e4800000, e4800fff]
[ 0.457431] PCI: 0000:00:04.0 reg 30 32bit mmio: [0, 1ffff]
[ 0.457450] pci 0000:00:04.0: supports D1
[ 0.457451] pci 0000:00:04.0: supports D2
[ 0.457454] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.457459] pci 0000:00:04.0: PME# disabled
[ 0.457505] PCI: 0000:00:0a.0 reg 10 32bit mmio: [0, fff]
[ 0.457525] pci 0000:00:0a.0: supports D1
[ 0.457527] pci 0000:00:0a.0: supports D2
[ 0.457529] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.457535] pci 0000:00:0a.0: PME# disabled
[ 0.457606] PCI: 0000:01:00.0 reg 10 32bit mmio: [f0000000, f7ffffff]
[ 0.457614] PCI: 0000:01:00.0 reg 14 32bit mmio: [e7800000, e781ffff]
[ 0.457621] PCI: 0000:01:00.0 reg 18 io port: [d800, d87f]
[ 0.457652] pci 0000:01:00.0: supports D1
[ 0.457654] pci 0000:01:00.0: supports D2
[ 0.457691] PCI: bridge 0000:00:01.0 io port: [d000, dfff]
[ 0.457697] PCI: bridge 0000:00:01.0 32bit mmio: [e7800000, e7ffffff]
[ 0.457703] PCI: bridge 0000:00:01.0 32bit mmio pref: [f0000000, febfffff]
[ 0.457732] bus 00 -> node 0
[ 0.457752] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.458007] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.480700] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 9 *11)
[ 0.480885] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 9 *11)
[ 0.481068] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 6 *11)
[ 0.481251] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 6 7) *11
[ 0.481441] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 5 11) *4
[ 0.481625] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 5 11) *4
[ 0.481809] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 5 11) *4
[ 0.481992] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 5 11) *4
[ 0.482283] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.482342] pnp: PnP ACPI init
[ 0.482358] ACPI: bus type pnp registered
[ 0.488625] pnp: PnP ACPI: found 16 devices
[ 0.488629] ACPI: ACPI bus type pnp unregistered
[ 0.488636] PnPBIOS: Disabled by ACPI PNP
[ 0.489234] PCI: Using ACPI for IRQ routing
[ 0.489425] NET: Registered protocol family 8
[ 0.489425] NET: Registered protocol family 20
[ 0.489425] NetLabel: Initializing
[ 0.489425] NetLabel: domain hash size = 128
[ 0.489425] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.489425] NetLabel: unlabeled traffic allowed by default
[ 0.489425] tracer: 772 pages allocated for 65536 entries of 48 bytes
[ 0.489425] actual entries 65620
[ 0.489425] AppArmor: AppArmor Filesystem Enabled
[ 0.489425] ACPI: RTC can wake from S4
[ 0.489425] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.489425] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
[ 0.489425] system 00:00: iomem range 0x100000-0x1dffffff could not be reserved
[ 0.489425] system 00:00: iomem range 0xfec00000-0xfec000ff could not be reserved
[ 0.489425] system 00:02: ioport range 0xe400-0xe47f has been reserved
[ 0.489425] system 00:02: ioport range 0xe480-0xe4ff has been reserved
[ 0.489425] system 00:02: ioport range 0xe600-0xe61f has been reserved
[ 0.489425] system 00:02: ioport range 0x480-0x48f has been reserved
[ 0.489425] system 00:02: iomem range 0xffee0000-0xffefffff has been reserved
[ 0.489425] system 00:03: iomem range 0xfffe0000-0xffffffff could not be reserved
[ 0.489425] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
[ 0.489425] system 00:04: ioport range 0x600-0x61f has been reserved
[ 0.489425] system 00:04: ioport range 0x800-0x87f has been reserved
[ 0.489425] system 00:04: ioport range 0x880-0x88f has been reserved
[ 0.489425] system 00:04: iomem range 0xfff80000-0xfffdffff has been reserved
[ 0.489425] system 00:0d: ioport range 0x290-0x297 has been reserved
[ 0.489425] system 00:0d: ioport range 0x500-0x507 has been reserved
[ 0.525881] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.525888] pci 0000:00:01.0: IO window: 0xd000-0xdfff
[ 0.525895] pci 0000:00:01.0: MEM window: 0xe7800000-0xe7ffffff
[ 0.525901] pci 0000:00:01.0: PREFETCH window: 0x000000f0000000-0x000000febfffff
[ 0.525910] pci 0000:00:0a.0: CardBus bridge, secondary bus 0000:02
[ 0.525913] pci 0000:00:0a.0: IO window: 0x001000-0x0010ff
[ 0.525918] pci 0000:00:0a.0: IO window: 0x001400-0x0014ff
[ 0.525924] pci 0000:00:0a.0: PREFETCH window: 0x20000000-0x23ffffff
[ 0.525929] pci 0000:00:0a.0: MEM window: 0x24000000-0x27ffffff
[ 0.525949] pci 0000:00:01.0: setting latency timer to 64
[ 0.525972] pci 0000:00:0a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.525979] bus: 00 index 0 io port: [0, ffff]
[ 0.525982] bus: 00 index 1 mmio: [0, ffffffff]
[ 0.525984] bus: 01 index 0 io port: [d000, dfff]
[ 0.525987] bus: 01 index 1 mmio: [e7800000, e7ffffff]
[ 0.525989] bus: 01 index 2 mmio: [f0000000, febfffff]
[ 0.525992] bus: 01 index 3 mmio: [0, 0]
[ 0.525995] bus: 02 index 0 io port: [1000, 10ff]
[ 0.525997] bus: 02 index 1 io port: [1400, 14ff]
[ 0.525999] bus: 02 index 2 mmio: [20000000, 23ffffff]
[ 0.526002] bus: 02 index 3 mmio: [24000000, 27ffffff]
[ 0.526022] NET: Registered protocol family 2
[ 0.526234] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.526567] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.526706] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.526833] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.526837] TCP reno registered
[ 0.526979] NET: Registered protocol family 1
[ 0.527161] checking if image is initramfs... it is
[ 1.028078] Switched to high resolution mode on CPU 0
[ 1.276410] Freeing initrd memory: 7983k freed
[ 1.276768] Simple Boot Flag at 0x3a set to 0x1
[ 1.277556] audit: initializing netlink socket (disabled)
[ 1.277589] type=2000 audit(1242215817.276:1): initialized
[ 1.282789] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.285923] VFS: Disk quotas dquot_6.5.1
[ 1.286071] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.286240] msgmni has been set to 940
[ 1.286438] io scheduler noop registered
[ 1.286443] io scheduler anticipatory registered
[ 1.286446] io scheduler deadline registered
[ 1.286471] io scheduler cfq registered (default)
[ 1.286559] pci 0000:01:00.0: Boot video device
[ 1.287079] isapnp: Scanning for PnP cards...
[ 1.640792] isapnp: No Plug & Play device found
[ 1.708224] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.708636] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.709469] serial 0000:00:02.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.709480] serial 0000:00:02.6: PCI INT C disabled
[ 1.711941] brd: module loaded
[ 1.712098] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.712319] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.713471] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 1.713704] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.713713] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.713716] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.713719] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.713722] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.714930] mice: PS/2 mouse device common for all mice
[ 1.715199] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.715230] rtc0: alarms up to one month
[ 1.715444] EISA: Probing bus 0 at eisa.0
[ 1.715455] Cannot allocate resource for EISA slot 1
[ 1.715482] EISA: Detected 0 cards.
[ 1.715488] cpuidle: using governor ladder
[ 1.715491] cpuidle: using governor menu
[ 1.716224] TCP cubic registered
[ 1.716271] Using IPI No-Shortcut mode
[ 1.716726] registered taskstats version 1
[ 1.716868] Magic number: 9:27:934
[ 1.717112] rtc_cmos 00:06: setting system clock to 2009-05-13 11:56:58 UTC (1242215818)
[ 1.717117] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.717119] EDD information not available.
[ 1.717846] Freeing unused kernel memory: 424k freed
[ 1.717909] Write protecting the kernel text: 2576k
[ 1.717945] Write protecting the kernel read-only data: 936k
[ 1.722493] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 1.954703] fuse init (API version 7.9)
[ 2.233394] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 2.237458] processor ACPI0007:00: registered as cooling_device0
[ 2.237464] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 2.263213] thermal LNXTHERM:01: registered as thermal_zone0
[ 2.263633] ACPI: Thermal Zone [THRM] (48 C)
[ 3.433083] No dock devices found.
[ 3.492577] SCSI subsystem initialized
[ 3.503477] usbcore: registered new interface driver usbfs
[ 3.503517] usbcore: registered new interface driver hub
[ 3.507171] ohci1394 0000:00:02.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.558975] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[17] MMIO=[e7000000-e70007ff] Max Packet=[2048] IR/IT contexts=[4/6]
[ 3.578103] usbcore: registered new device driver usb
[ 3.680691] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.698248] libata version 3.00 loaded.
[ 3.710706] sis900.c: v1.08.10 Apr. 2 2006
[ 3.737950] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 3.737976] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 3.738066] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
[ 3.738091] ohci_hcd 0000:00:03.0: irq 20, io mem 0xe6800000
[ 3.794316] usb usb1: configuration #1 chosen from 1 choice
[ 3.794358] hub 1-0:1.0: USB hub found
[ 3.794374] hub 1-0:1.0: 2 ports detected
[ 3.896986] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 3.897008] ohci_hcd 0000:00:03.1: OHCI Host Controller
[ 3.897070] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
[ 3.897101] ohci_hcd 0000:00:03.1: irq 21, io mem 0xe6000000
[ 3.954359] usb usb2: configuration #1 chosen from 1 choice
[ 3.954404] hub 2-0:1.0: USB hub found
[ 3.954424] hub 2-0:1.0: 2 ports detected
[ 4.056568] ohci_hcd 0000:00:03.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 4.056595] ohci_hcd 0000:00:03.2: OHCI Host Controller
[ 4.056637] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
[ 4.056669] ohci_hcd 0000:00:03.2: irq 22, io mem 0xe5800000
[ 4.114322] usb usb3: configuration #1 chosen from 1 choice
[ 4.114365] hub 3-0:1.0: USB hub found
[ 4.114386] hub 3-0:1.0: 2 ports detected
[ 4.320499] ehci_hcd 0000:00:03.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 4.320527] ehci_hcd 0000:00:03.3: EHCI Host Controller
[ 4.320569] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4
[ 4.320620] ehci_hcd 0000:00:03.3: cache line size of 128 is not supported
[ 4.320641] ehci_hcd 0000:00:03.3: irq 23, io mem 0xe5000000
[ 4.332094] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 4.332416] usb usb4: configuration #1 chosen from 1 choice
[ 4.332465] hub 4-0:1.0: USB hub found
[ 4.332483] hub 4-0:1.0: 6 ports detected
[ 4.540479] sis900 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 4.541671] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
[ 4.553983] 0000:00:04.0: Using transceiver found at address 1 as default
[ 4.555119] eth0: SiS 900 PCI Fast Ethernet at 0xa000, IRQ 19, 00:0e:a6:3f:ad:76
[ 4.561060] pata_sis 0000:00:02.5: version 0.5.2
[ 4.561776] scsi0 : pata_sis
[ 4.561959] scsi1 : pata_sis
[ 4.562571] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xb800 irq 14
[ 4.562575] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xb808 irq 15
[ 4.732427] ata1.00: ATA-5: HITACHI_DK23FA-40, 00M5A0A0, max UDMA/100
[ 4.732433] ata1.00: 78140160 sectors, multi 16: LBA
[ 4.732458] ata1.01: ATAPI: QSI CD-RW/DVD-ROM SBW-242, UR01, max UDMA/33
[ 4.740433] ata1.00: configured for UDMA/100
[ 4.756319] ata1.01: configured for UDMA/33
[ 4.756400] ata2: port disabled. ignoring.
[ 4.756586] scsi 0:0:0:0: Direct-Access ATA HITACHI_DK23FA-4 00M5 PQ: 0 ANSI: 5
[ 4.757257] scsi 0:0:1:0: CD-ROM QSI CDRW/DVD SBW-242 UR01 PQ: 0 ANSI: 5
[ 4.921105] usb 3-2: new low speed USB device using ohci_hcd and address 2
[ 4.927255] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.927308] scsi 0:0:1:0: Attached scsi generic sg1 type 5
[ 4.955935] Driver 'sd' needs updating - please use bus_type methods
[ 4.958888] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
[ 4.958920] sd 0:0:0:0: [sda] Write Protect is off
[ 4.958924] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.958968] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.959097] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
[ 4.959120] sd 0:0:0:0: [sda] Write Protect is off
[ 4.959125] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.959168] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.959175] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 4.975740] Marking TSC unstable due to TSC halts in idle
[ 4.986874] sda1 sda2 <<7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e0180003156049]
[ 5.008916] sda5 >
[ 5.009161] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.015926] sr0: scsi3-mmc drive: 4x/24x writer cd/rw xa/form2 cdda tray
[ 5.015935] Uniform CD-ROM driver Revision: 3.20
[ 5.016141] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 5.133718] usb 3-2: configuration #1 chosen from 1 choice
[ 5.161271] usbcore: registered new interface driver hiddev
[ 5.167531] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:03.2/usb3/3-2/3-2:1.0/input/input2
[ 5.168237] input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:03.2-2
[ 5.168275] usbcore: registered new interface driver usbhid
[ 5.168280] usbhid: v2.6:USB HID core driver
[ 5.309359] PM: Starting manual resume from disk
[ 5.309366] PM: Resume from partition 8:5
[ 5.309368] PM: Checking hibernation image.
[ 5.309627] PM: Resume from disk failed.
[ 5.389354] kjournald starting. Commit interval 5 seconds
[ 5.389384] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.645176] udevd version 124 started
[ 13.355095] Linux agpgart interface v0.103
[ 13.425190] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 13.514969] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 13.584985] agpgart-sis 0000:00:00.0: SiS chipset [1039/0650]
[ 13.589910] agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xe8000000
[ 13.731457] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0xe600
[ 13.798688] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 13.808074] ACPI: Power Button (FF) [PWRF]
[ 13.808295] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
[ 13.808394] ACPI: Lid Switch [LID]
[ 13.808549] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
[ 13.824044] ACPI: Power Button (CM) [PWRB]
[ 13.824260] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6
[ 13.836038] ACPI: Sleep Button (CM) [SLPB]
[ 13.878647] ACPI: AC Adapter [AC] (on-line)
[ 14.016113] asus-laptop: Asus Laptop Support version 0.42
[ 14.023800] asus-laptop: A2H model detected
[ 14.310091] ACPI: Battery Slot [BAT0] (battery present)
[ 14.882762] parport_pc 00:09: reported by Plug and Play ACPI
[ 14.882821] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 15.129667] wbsd: Winbond W83L51xD SD/MMC card interface driver
[ 15.129672] wbsd: Copyright(c) Pierre Ossman
[ 15.142342] mmc0: W83L51xD id 7112 at 0x248 irq 6 FIFO PnP
[ 16.014856] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 16.277000] Yenta: CardBus bridge found at 0000:00:0a.0 [1043:1764]
[ 16.277024] Yenta: adjusting diagnostic: 20 -> 60
[ 16.277032] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 16.277034] Yenta: Routing CardBus interrupts to PCI
[ 16.277041] Yenta TI: socket 0000:00:0a.0, mfunc 0x00101d02, devctl 0x44
[ 16.508735] Yenta: ISA IRQ mask 0x0e18, PCI irq 16
[ 16.508741] Socket status: 30000006
[ 17.031176] Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 17.141056] Synaptics Touchpad, model: 1, fw: 4.6, id: 0x925ea1, caps: 0x80471b/0x0
[ 17.174778] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[ 17.856044] intel8x0_measure_ac97_clock: measured 55311 usecs
[ 17.856049] intel8x0: clocking to 48000
[ 19.835325] cs: IO port probe 0x100-0x3af: excluding 0x240-0x24f
[ 19.837104] cs: IO port probe 0x3e0-0x4ff: clean.
[ 19.837844] cs: IO port probe 0x820-0x8ff: clean.
[ 19.838200] cs: IO port probe 0xc00-0xcf7: clean.
[ 19.839050] cs: IO port probe 0xa00-0xaff: clean.
[ 20.690966] lp0: using parport0 (interrupt-driven).
[ 20.947375] Adding 1413680k swap on /dev/sda5. Priority:-1 extents:1 across:1413680k
[ 21.520457] EXT3 FS on sda1, internal journal
[ 22.809547] type=1505 audit(1242215839.311:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4037
[ 23.027702] type=1505 audit(1242215839.527:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4042
[ 23.028220] type=1505 audit(1242215839.531:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4042
[ 23.237781] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 24.179759] ACPI: WMI: Mapper loaded
[ 25.559682] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 25.623232] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 25.623243] apm: overridden by ACPI.
[ 25.852176] ppdev: user-space parallel port driver
[ 27.796254] Bluetooth: Core ver 2.13
[ 27.799606] NET: Registered protocol family 31
[ 27.799615] Bluetooth: HCI device and connection manager initialized
[ 27.799621] Bluetooth: HCI socket layer initialized
[ 27.823634] Bluetooth: L2CAP ver 2.11
[ 27.823643] Bluetooth: L2CAP socket layer initialized
[ 27.840239] Bluetooth: SCO (Voice Link) ver 0.6
[ 27.840249] Bluetooth: SCO socket layer initialized
[ 27.856643] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 27.856652] Bluetooth: BNEP filters: protocol multicast
[ 27.899900] Bridge firewalling registered
[ 27.902227] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[ 28.006685] Bluetooth: RFCOMM socket layer initialized
[ 28.007075] Bluetooth: RFCOMM TTY layer initialized
[ 28.007084] Bluetooth: RFCOMM ver 1.10
[ 32.146183] eth0: Media Link Off
[ 155.920263] ppdev0: registered pardevice
[ 155.968052] ppdev0: unregistered pardevice
[ 156.130814] type=1503 audit(1242215972.631:5): operation="inode_permission" requested_mask="r::" denied_mask="r::" fsuid=7 name="/proc/5513/net/" pid=5513 profile="/usr/sbin/cupsd"
[ 156.227166] NET: Registered protocol family 10
[ 156.230237] lo: Disabled Privacy Extensions
[ 156.232171] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 156.234346] type=1503 audit(1242215972.735:6): operation="socket_create" family="ax25" sock_type="dgram" protocol=0 pid=5513 profile="/usr/sbin/cupsd"
[ 156.234362] type=1503 audit(1242215972.735:7): operation="socket_create" family="netrom" sock_type="seqpacket" protocol=0 pid=5513 profile="/usr/sbin/cupsd"
[ 156.234371] type=1503 audit(1242215972.735:8): operation="socket_create" family="rose" sock_type="dgram" protocol=0 pid=5513 profile="/usr/sbin/cupsd"
[ 156.234378] type=1503 audit(1242215972.735:9): operation="socket_create" family="ipx" sock_type="dgram" protocol=0 pid=5513 profile="/usr/sbin/cupsd"
[ 156.234384] type=1503 audit(1242215972.735:10): operation="socket_create" family="appletalk" sock_type="dgram" protocol=0 pid=5513 profile="/usr/sbin/cupsd"
[ 156.234393] type=1503 audit(1242215972.735:11): operation="socket_create" family="econet" sock_type="dgram" protocol=0 pid=5513 profile="/usr/sbin/cupsd"
[ 156.234400] type=1503 audit(1242215972.735:12): operation="socket_create" family="ash" sock_type="dgram" protocol=0 pid=5513 profile="/usr/sbin/cupsd"
[ 156.234408] type=1503 audit(1242215972.735:13): operation="socket_create" family="x25" sock_type="seqpacket" protocol=0 pid=5513 profile="/usr/sbin/cupsd"
[ 156.234533] type=1503 audit(1242215972.735:14): operation="inode_permission" requested_mask="::r" denied_mask="::r" fsuid=7 name="/proc/5513/net/dev" pid=5513 profile="/usr/sbin/cupsd"
[ 157.688298] ppdev0: registered pardevice
[ 157.736515] ppdev0: unregistered pardevice
[ 158.403714] ppdev0: registered pardevice
[ 158.452337] ppdev0: unregistered pardevice
[ 860.150864] UDF-fs: Partition marked readonly; forcing readonly mount
[ 860.285995] UDF-fs INFO UDF: Mounting volume 'CDROM', timestamp 2009/05/06 11:56 (1078)
Module Size Used by
isofs 40100 0
udf 88356 0
crc_itu_t 10112 1 udf
ipv6 263972 8
binfmt_misc 16904 1
rfcomm 44432 0
bridge 56980 0
stp 10628 1 bridge
bnep 20480 2
sco 18308 2
l2cap 30464 6 rfcomm,bnep
bluetooth 61924 6 rfcomm,bnep,sco,l2cap
ppdev 15620 0
speedstep_lib 12676 0
cpufreq_stats 13188 0
cpufreq_userspace 11396 0
cpufreq_ondemand 14988 0
freq_table 12672 2 cpufreq_stats,cpufreq_ondemand
cpufreq_powersave 9856 0
cpufreq_conservative 14600 0
video 25104 0
output 11008 1 video
sbs 19464 0
sbshc 13440 1 sbs
wmi 14504 0
pci_slot 12552 0
container 11520 0
iptable_filter 10752 0
ip_tables 19600 1 iptable_filter
x_tables 22916 1 ip_tables
sbp2 29324 0
lp 17156 0
joydev 18368 0
pcmcia 43052 0
snd_intel8x0 37532 3
snd_ac97_codec 111652 1 snd_intel8x0
ac97_bus 9856 1 snd_ac97_codec
snd_pcm_oss 46848 0
snd_mixer_oss 22784 1 snd_pcm_oss
snd_pcm 83204 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_seq_dummy 10884 0
evdev 17696 9
snd_seq_oss 38528 0
snd_seq_midi 14336 0
psmouse 45200 0
serio_raw 13444 0
snd_rawmidi 29824 1 snd_seq_midi
snd_seq_midi_event 15232 2 snd_seq_oss,snd_seq_midi
snd_seq 57776 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
yenta_socket 31756 1
rsrc_nonstatic 19072 1 yenta_socket
pcmcia_core 43412 3 pcmcia,yenta_socket,rsrc_nonstatic
pcspkr 10624 0
snd_timer 29960 2 snd_pcm,snd_seq
snd_seq_device 15116 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 63268 16 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 15328 1 snd
snd_page_alloc 16136 2 snd_intel8x0,snd_pcm
wbsd 22280 0
mmc_core 58268 1 wbsd
parport_pc 39204 1
parport 42604 3 ppdev,lp,parport_pc
battery 18436 0
asus_laptop 24440 0
led_class 12164 1 asus_laptop
ac 12292 0
button 14224 0
i2c_sis96x 12420 0
i2c_core 31892 1 i2c_sis96x
sis_agp 15232 1
shpchp 37908 0
pci_hotplug 35236 1 shpchp
agpgart 42184 1 sis_agp
ext3 133256 1
jbd 55444 1 ext3
mbcache 16004 1 ext3
usbhid 35840 0
hid 50560 1 usbhid
sr_mod 22212 0
cdrom 43168 1 sr_mod
sd_mod 42264 3
crc_t10dif 9984 1 sd_mod
sg 39732 0
pata_acpi 12160 0
pata_sis 18436 2
ata_generic 12932 0
sis900 27904 0
ohci_hcd 31888 0
ehci_hcd 43276 0
libata 177312 3 pata_acpi,pata_sis,ata_generic
mii 13440 1 sis900
ohci1394 37936 0
usbcore 148848 4 usbhid,ohci_hcd,ehci_hcd
scsi_mod 155212 5 sbp2,sr_mod,sd_mod,sg,libata
dock 16656 1 libata
ieee1394 96324 2 sbp2,ohci1394
thermal 23708 0
processor 42156 2 thermal
fan 12548 0
fbcon 47648 0
tileblit 10880 1 fbcon
font 16512 1 fbcon
bitblit 13824 1 fbcon
softcursor 9984 1 bitblit
fuse 60828 3
------------------------------------------------------------------------
A modem device/card may be disabled at bootup, due to a variety of causes.
Look at the bootup diagnostics record dmesg.txt and try to garner some
understanding from it. Attach it to your query to discuss@xxxxxxxxxxxxx
Possibilities therein are too diverse to be automagically processed by
scanModem. A line including the PCI
bus slot 00:02.6 of your modem, and "disable" or "disabling" predicts problems,
though sometimes corrected later in the bootup. Similarly a line with "@"
in the interrupt (IRQ) for your 00:02.6 slot is predictive of problems.
Possible corrections are:
1) Within the boot up BIOS, change from a Windows to a non-PNP/Other Operating System type.
Instructions for accessing BIOS are at:
http://linmodems.technion.ac.il/resources.html within: Additional Resourcces.
2a) Add an option "pci=routeirq" to the kernel boot up line.
Here is an example paragraph from /boot/grub/menu.lst :
title Ubuntu, kernel 2.6.15-26-686
root (hd0,6)
kernel /boot/vmlinuz-2.6.15-26-686 root=/dev/hda7 ro pci=routeirq
initrd /boot/initrd.img-2.6.15-26-686
savedefault
2b) Same as above, but use "pollirq" instead of "pci=routeirq".
3) Within some BIOS setups, IRQ assignments can be changed.
4) On non-laptop systems, moving the modem card to another slot has helped.
5) Blacklist as many drivers as possible. See
http://linmodems.technion.ac.il/bigarch/archive-eighth/msg01593.html
6) Sometimes upgrading the kernel solves the problem.
7) Sometimes downgrading the kernel solves the problem.
8) Sometimes changing the Linux distribution solves the problem.
9) Get unloading.gz from http://linmodems.technion.ac.il/linmodems/
This script unloads excess drivers which may be competing for resources.
Before trying to set up the modem, do:
$ gunzip unloading.gz
$ chmod +x unloading
$ su - root
# ./unloading
Or for Ubuntu related Distros
$ sudo ./unloading
