[sudo] password for aneta:
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT0198333130
--> Waiting for carrier.
ATDT0198333130
CONNECT 52000
Unauthorised access to this computer system is prohibited
User Access Verification
Username:
--> Carrier detected. Waiting for prompt.
Username:
--> Looks like a login prompt.
--> Sending: anetat@domainremoved
anetat@domainremoved
Password:
--> Looks like a password prompt.
--> Sending: (password)
Entering PPP mode.
Async interface address is unnumbered (Loopback0)
Your IP address is 0.0.0.0. MTU is 1500 bytes
--> Looks like a welcome message.
--> Starting pppd at Thu Apr 30 10:06:18 2009
--> Pid of pppd: 5627
--> Using interface ppp0
--> local IP address 203.194.48.224
--> remote IP address 203.220.79.1
--> primary DNS address 203.194.56.150
--> secondary DNS address 203.194.27.57
****(HOW DO I FORMALLY EXIT FROM THIS SCREEN)****?????
THE IP ADDRESS IS LOOKING GOOD BUT PING DOESN'T SEEM TO BE WORKING.
I'VE DISCONNECTED MYSELF FROM THE LAN & USING THE DIALUP.
I CAN'T LOAD A WEB PAGE EITHER IN CASE PING HAS BEEN DISABLED.
aneta@ubuntu:~$ ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:128 errors:0 dropped:0 overruns:0 frame:0
TX packets:128 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:6400 (6.2 KB) TX bytes:6400 (6.2 KB)
ppp0 Link encap:Point-to-Point Protocol
inet addr:203.194.48.224 P-t-P:203.220.79.1 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:5 errors:0 dropped:0 overruns:0 frame:0
TX packets:5 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:175 (175.0 B) TX bytes:97 (97.0 B)
aneta@ubuntu:~$ ping 139.130.4.5
connect: Network is unreachable
aneta@ubuntu:~$
I FEAR BECAUSE I MAY NOT HAVE EXIT (sudo wvdial) PROPERLY, NOW WHEN I TRY TO RECONNECT, I GET:
aneta@ubuntu:~$ sudo wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
--> Sending: ATQ0
--> Re-Sending: ATZ
--> Modem not responding.
aneta@ubuntu:~$
SORRY FOR BEING A PAIN.
RICK
--- On Thu, 30/4/09, Antonio Olivares <olivares14031@xxxxxxxxx> wrote:
From: Antonio Olivares <olivares14031@xxxxxxxxx>
Subject: Re: Fw: IBM Thinkpad iSeries 1200 running Xubuntu 8.04 - modem help required.
To: "Rick @ Yahoo" <r_vecranges@xxxxxxxxxxxx>
Cc: "Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx>, "Discuss LinModems" <discuss@xxxxxxxxxxxxx>
Received: Thursday, 30 April, 2009, 10:04 AM
Rick,
Upon opening a terminal shell and already having SLMODEMD running in
the background ie. i
aneta@ubuntu:~$ sudo slmodemd -c AUSTRALIA --alsa modem:1
SmartLink Soft Modem: version 2.9.11 Aug 3 2008 21:41:20
symbolic link `/dev/ttySL0' -> `/dev/pts/0' created.
modem `modem:1' created. TTY is `/dev/pts/0'
Use `/dev/ttySL0' as modem device, Ctrl+C for termination.
Fire up a tab or another terminal shell and try:
aneta@ubuntu:~$ sudo wvdial
and cross your fingers and hopefully it connects without problems.
Report back if you succeed connecting :)
Regards,
Antonio
On Wed, Apr 29, 2009 at 6:54 PM, Rick @ Yahoo <r_vecranges@xxxxxxxxxxxx> wrote:
>
> Thanks for the reply
>
> I've updated the wvdial.conf file as advised
>
> [Dialer Defaults]
> Init1 = ATZ
> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
> Modem Type = Analog Modem
> Baud = 460800
> New PPPD = yes
> Modem = /dev/ttySL0
> ISDN = 0
> Phone = replacedisp#
> Password = pwdreplaced
> Username = anetat@xxxxxxxxxxxxxxxxxxxxxx
> Carrier Check = No
> #Stupid Mode = 1
>
> (First try to connect and upon a successful connection, then you may
> try GNOME-PPP.).....Sorry if this sounds dumb, but how do I connect without using GNOME-PPP?
>
> Thanks
> Rick
>
>
>
> --- On Wed, 29/4/09, Antonio Olivares <olivares14031@xxxxxxxxx> wrote:
>
> From: Antonio Olivares <olivares14031@xxxxxxxxx>
> Subject: Re: Fw: IBM Thinkpad iSeries 1200 running Xubuntu 8.04 - modem help required.
> To: r_vecranges@xxxxxxxxxxxx
> Cc: "Marvin Stodolsky" <marvin.stodolsky@xxxxxxxxx>, "Discuss LinModems" <discuss@xxxxxxxxxxxxx>
> Received: Wednesday, 29 April, 2009, 4:03 PM
>
> Rick,
>
> Before you go to GNOME-PPP first make sure that you can connect use
> wvdial. First setup your connection as follows:
>
> Leave your connection as:
>
> aneta@ubuntu:~$ sudo slmodemd -c AUSTRALIA --alsa modem:1
> SmartLink Soft Modem: version 2.9.11 Aug 3 2008 21:41:20
> symbolic link `/dev/ttySL0' -> `/dev/pts/0' created.
> modem `modem:1' created. TTY is `/dev/pts/0'
> Use `/dev/ttySL0' as modem device, Ctrl+C for termination.
> aneta@ubuntu:~$
>
> Fire up another terminal or tab and type the following:
>
> $ sudo wvdialconf /etc/wvdial.conf
>
> will scan and find your modem port, in this case it should be /dev/ttySL0
>
> then you may hand edit the file /etc/wvdial.conf like
> $ sudo gedit /etc/wvdial.conf
>
> remove the ";" and "<", ">" and add your corresponding username,
> password, ISP phone number , a line "Carrier Check = no", a line with
> a "#" or a ";" in front of another line "Stupid Mode = 1". Making
> your wvdial.conf look like:
>
> [olivares@localhost ~]$ cat /etc/wvdial.conf
>
> [Dialer Defaults]
> Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90 <--- X3 disables checking
> for dialtone, +MS=90 helps with stubborn ISP's, you can change to
> +MS=34 if needed.
> Modem Type = Analog Modem
> Phone = YOUR_ISP'S_PHONE_NUMBER_HERE
> ISDN = 0
> Username = YOUR_USERNAME
> Init1 = ATZ
> Password = YOUR_PASSWORD
> Modem = /dev/ttySL0
> Baud = 460800
> Carrier Check = No
> #Stupid Mode = 1
>
> First try to connect and upon a successfull connection, then you may
> try GNOME-PPP. Report back presently.
>
> Regards,
>
> Antonoi
>
>
> On Tue, Apr 28, 2009 at 11:50 PM, <r_vecranges@xxxxxxxxxxxx> wrote:
>>
>> Marvin
>>
>> aneta@ubuntu:~$
>> aneta@ubuntu:~$ sudo /etc/init.d/sl-modem-daemon stop
>> [sudo] password for aneta:
>> Shutting down SmartLink Modem driver normally.
>> Unloading modem driver from kernel ... snd_atiixp_modem.
>> aneta@ubuntu:~$ sudo modprobe -r snd-intel8x0m
>> aneta@ubuntu:~$ sudo modprobe snd-intel8x0m
>> aneta@ubuntu:~$ sudo slmodemd -c AUSTRALIA --alsa modem:1
>> SmartLink Soft Modem: version 2.9.11 Aug 3 2008 21:41:20
>> symbolic link `/dev/ttySL0' -> `/dev/pts/0' created.
>> modem `modem:1' created. TTY is `/dev/pts/0'
>> Use `/dev/ttySL0' as modem device, Ctrl+C for termination.
>> aneta@ubuntu:~$
>>
>> This is looking better, but where do I go from here?
>> GNOME PPP still can't detect the modem.
>> Do I have to run "sudo slmodemd -c AUSTRALIA --alsa modem:1" everytime I want to use the modem, or is this a once off command.
>> Should I use GNOME PPP or should I use something else.
>> Pls advise.
>>
>> Thanks
>> Rick
>>
>>
>> --- On Wed, 29/4/09, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote:
>>
>> From: Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>
>> Subject: Re: Fw: IBM Thinkpad iSeries 1200 running Xubuntu 8.04 - modem help required.
>> To: "Rick @ Yahoo" <r_vecranges@xxxxxxxxxxxx>
>> Cc: "Discuss LinModems" <discuss@xxxxxxxxxxxxx>
>> Received: Wednesday, 29 April, 2009, 1:16 PM
>>
>> Rick,
>>
>> Try shutting down all audio functions, and
>> $ sudo /etc/init.d/sl-modem-daemon stop
>> then retest.
>>
>> MarvS
>>
>> On Tue, Apr 28, 2009 at 10:37 PM, Rick @ Yahoo <r_vecranges@xxxxxxxxxxxx> wrote:
>>> Marvin.....issues unloading......this is what i get
>>>
>>> aneta@ubuntu:~/Desktop/SLMODEMD.gcc4.2$ sudo modprobe -r snd-intel8x0m
>>> [sudo] password for aneta:
>>> FATAL: Module snd_intel8x0m is in use.
>>> aneta@ubuntu:~/Desktop/SLMODEMD.gcc4.2$
>>> aneta@ubuntu:~/Desktop/SLMODEMD.gcc4.2$ sudo modprobe snd-intel8x0m
>>> aneta@ubuntu:~/Desktop/SLMODEMD.gcc4.2$ cd ..
>>> aneta@ubuntu:~/Desktop$ cd ~
>>> aneta@ubuntu:~$ sudo slmodemd -c AUSTRALIA --alsa modem:1
>>> error: alsa setup: cannot open playback device 'modem:1': Device or resource
>>> busy
>>> error: cannot setup device `modem:1'
>>> aneta@ubuntu:~$
>>>
>>> Rick
>>>
>>> --- On Tue, 28/4/09, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote:
>>>
>>> From: Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>
>>> Subject: Re: Fw: IBM Thinkpad iSeries 1200 running Xubuntu 8.04 - modem help
>>> required.
>>> To: r_vecranges@xxxxxxxxxxxx
>>> Cc: "Antonio Olivares" <olivares14031@xxxxxxxxx>, "Discuss LinModems"
>>> <discuss@xxxxxxxxxxxxx>
>>> Received: Tuesday, 28 April, 2009, 10:28 PM
>>>
>>> Rick,
>>>
>>> Try unloading and reloading the tryer
>>> $ sudo modprobe -r snd-intel8x0m
>>> $ sudo modprobe snd-intel8x0m
>>>
>>> Then again (from home folder is ok)
>>> $ sudo slmodemd -c AUSTRALIA --alsa modem:1
>>>
>>> If successful, the modem should be found by:
>>> $ sudo wvdialconf /etc/wvdial.conf
>>>
>>> MarvS
>>>
>>> On Tue, Apr 28, 2009 at 12:23 AM, <r_vecranges@xxxxxxxxxxxx> wrote:
>>>>
>>>> Hello all and thanks for responding.
>>>>
>>>> Real newbie here...I hope I've done what's required but seem to get the
>>>> following:
>>>>
>>>> Sorry for all the info..better more than not enough.
>>>>
>>>> aneta@ubuntu:~/Desktop/SLMODEMD.gcc4.2$ ls
>>>> 1st_Read.txt CountryList.txt setup slmodemd.txt Unload.txt
>>>> Changes Files.txt Slmodem-ALSA.txt slmodem.txt wvdial.conf
>>>> COPYING README slmodemd Testing.txt
>>>> aneta@ubuntu:~/Desktop/SLMODEMD.gcc4.2$ sudo slmodemd -c AUSTRALIA --alsa
>>>> modem:1
>>>> [sudo] password for aneta:
>>>> error: alsa setup: cannot open playback device 'modem:1': Device or
>>>> resource busy
>>>> error: cannot setup device `modem:1'
>>>> aneta@ubuntu:~/Desktop/SLMODEMD.gcc4.2$
>>>>
>>>> ***Obviously the modem is not on 1, so how do I find out what it should
>>>> be.***
>>>>
>>>> Hope the following info helps:
>>>> aneta@ubuntu:~/Desktop/SLMODEMD.gcc4.2$ lsusb
>>>> Bus 001 Device 003: ID 9710:7830 MosChip Semiconductor
>>>> Bus 001 Device 002: ID 05b8:3021 Agiler, Inc.
>>>> Bus 001 Device 001: ID 0000:0000
>>>> aneta@ubuntu:~/Desktop/SLMODEMD.gcc4.2$ lspci
>>>> 00:00.0 Host bridge: Intel Corporation 82440MX Host Bridge (rev 01)
>>>> 00:00.1 Multimedia audio controller: Intel Corporation 82440MX AC'97 Audio
>>>> Controller
>>>> 00:00.2 Modem: Intel Corporation 82440MX AC'97 Modem Controller
>>>> 00:02.0 VGA compatible controller: Silicon Motion, Inc. SM712 LynxEM+ (rev
>>>> a0)
>>>> 00:03.0 CardBus bridge: O2 Micro, Inc. OZ6812 CardBus Controller (rev 05)
>>>> 00:07.0 ISA bridge: Intel Corporation 82440MX ISA Bridge (rev 01)
>>>> 00:07.1 IDE interface: Intel Corporation 82440MX EIDE Controller
>>>> 00:07.2 USB Controller: Intel Corporation 82440MX USB Universal Host
>>>> Controller
>>>> 00:07.3 Bridge: Intel Corporation 82440MX Power Management Controller
>>>> aneta@ubuntu:~/Desktop/SLMODEMD.gcc4.2$
>>>>
>>>>
>>>> Thanks
>>>> Rick
>>>>
>>>>
>>>> --- On Mon, 27/4/09, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote:
>>>>
>>>> From: Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>
>>>> Subject: Re: Fw: IBM Thinkpad iSeries 1200 running Xubuntu 8.04 - modem
>>>> help required.
>>>> To: "Rick @ Yahoo" <r_vecranges@xxxxxxxxxxxx>
>>>> Cc: "Discuss LinModems" <discuss@xxxxxxxxxxxxx>
>>>> Received: Monday, 27 April, 2009, 10:08 PM
>>>>
>>>> Rick
>>>>
>>>> For Class 0703 Modem: Intel Corporation 82440MX AC'97 Modem Controller
>>>> Primary device ID: 8086:7196
>>>> Subsystem PCI_id 1014:01a2
>>>> Softmodem codec or chipset from diagnostics: SIL27, an
>>>> LSI/AgereSystems
>>>> type
>>>>
>>>> Support type needed or chipset: slmodemd
>>>>
>>>> Download from http://linmodems.technion.ac.il/packages/smartlink/
>>>> the package SLMODEMD.gcc4.2.tar.gz having a compiled slmodemd. Unpack
>>>> under Linux with:
>>>> $ tar zxf SLMODEMD.gcc4.2.tar.gz
>>>> and read instructions therein. But briefly, the modem is setup with
>>>> command:
>>>> sudo slmodemd -c YOUR_COUNTRY --alsa modem:1
>>>> reporting dynamic creation of ports:
>>>> /dev/ttySL0 --> /dev/pts/N , with N some number
>>>> Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow
>>>> through guidance.
>>>>
>>>> MarvS
>>>>
>>>> On Mon, Apr 27, 2009 at 12:33 AM, Rick @ Yahoo <r_vecranges@xxxxxxxxxxxx>
>>>> wrote:
>>>>>
>>>> Hello
>>>>>
>>>>> Complete Newbie here.
>>>>>
>>>>> Would like some help to configure my modem.
>>>>> I tried to read other forums but still don't have it working.
>>>>> https://answers.launchpad.net/ubuntu/+question/67722
>>>>>
>>>>> I've got a IBM Thinkpad iSeries 1200 running Xubuntu 8.04
>>>>>
>>>>> At one stage I could detect the modem in PPP GNOME...but now it's no
>>>>> longer dectecting the modem once I upgraded slmodemd from 2.9.9 to 2.9.11.
>>>>>
>>>>> Modem has never worked since installing Xubuntu.
>>>>>
>>>>> Thanks in advanced.
>>>>>
>>>>> R's
>>>>> Rick
>>>>>
>>>>> ModemData.txt is attached.
>>>>>
>>>>>
>>>>> Enjoy a safer web experience. Upgrade to the new Internet Explorer 8
>>>>> optimised for Yahoo!7. Get it now.
>>>>
>>>>
>>>>
>>>> Enjoy a safer web experience. Upgrade to the new Internet Explorer 8
>>>> optimised for Yahoo!7. Get it now.
>>>>
>>>
>>> ________________________________
>>> Enjoy a safer web experience. Upgrade to the new Internet Explorer 8
>>> optimised for Yahoo!7. Get it now..
>>
>>
>>
>>
>> Enjoy a better web experience. Upgrade to the new Internet Explorer 8 optimised for Yahoo!7. Get it now.
>>
>
>
>
> The new Internet Explorer 8 optimised for Yahoo!7: Faster, Safer, Easier.
>
The new Internet Explorer 8 optimised for Yahoo!7: Faster, Safer, Easier.
