I added the Carrier Check = no and disconnected my dsl modem before attempting to connect. Still not connecting. The below is what I get: default@default-desktop:~/d/SLMODEMD_gcc4.2_alsa1.0.17$ sudo wvdial --> WvDial: Internet dialer version 1.60 --> Cannot get information for serial port. --> Initializing modem. --> Sending: ATZ ATZ OK --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 OK --> Modem initialized. --> Sending: ATDT9087514072 --> Waiting for carrier. ATDT9087514072 NO CARRIER --> No Carrier! Trying again. --> Sending: ATDT9087514072 --> Waiting for carrier. ATDT9087514072 NO DIALTONE --> No dial tone. --> Disconnecting at Sat Apr 25 14:41:44 2009 default@default-desktop:~/d/SLMODEMD_gcc4.2_alsa1.0.17$ sudo nano /etc/wvdial.conf default@default-desktop:~/d/SLMODEMD_gcc4.2_alsa1.0.17$ sudo wvdial --> WvDial: Internet dialer version 1.60 --> Cannot get information for serial port. --> Initializing modem. --> Sending: ATZ ATZ OK --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 OK --> Modem initialized. --> Sending: ATDT9087514072 --> Waiting for carrier. ATDT9087514072 NO CARRIER --> No Carrier! Trying again. --> Sending: ATDT9087514072 --> Waiting for carrier. ATDT9087514072 NO DIALTONE --> No dial tone. --> Disconnecting at Sat Apr 25 14:43:26 2009 default@default-desktop:~/d/SLMODEMD_gcc4.2_alsa1.0.17$ sudo nano /etc/wvdial.conf default@default-desktop:~/d/SLMODEMD_gcc4.2_alsa1.0.17$ sudo wvdial --> WvDial: Internet dialer version 1.60 --> Cannot get information for serial port. --> Initializing modem. --> Sending: ATZ ATZ OK --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 OK --> Modem initialized. --> Sending: ATDT9087514072 --> Waiting for carrier. ATDT9087514072 NO CARRIER --> No Carrier! Trying again. --> Sending: ATDT9087514072 --> Waiting for carrier. ATDT9087514072 NO DIALTONE --> No dial tone. --> Disconnecting at Sat Apr 25 14:44:36 2009 On Fri, 2009-04-24 at 20:13 -0400, Marvin Stodolsky wrote: > RE: > Would the DSL modem on the same line be causing a problem with the > > dial-up modem? > Maybe. > Try shutting down the DSL modem when testing dialout. > > MarvS > > On Fri, Apr 24, 2009 at 7:13 PM, Chris <tmail78@xxxxxxxxxxx> wrote: > > Would the DSL modem on the same line be causing a problem with the > > dial-up modem? > > > > Here is what I got: > > > > default@default-desktop:/etc$ sudo wvdial > > --> WvDial: Internet dialer version 1.60 > > --> Cannot get information for serial port. > > --> Initializing modem. > > --> Sending: ATZ > > ATZ > > OK > > --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > > ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > > OK > > --> Modem initialized. > > --> Sending: ATDT9087514072 > > --> Waiting for carrier. > > ATDT9087514072 > > NO CARRIER > > --> No Carrier! Trying again. > > --> Sending: ATDT9087514072 > > --> Waiting for carrier. > > ATDT9087514072 > > BUSY > > --> The line is busy. Trying again. > > --> Sending: ATDT9087514072 > > --> Waiting for carrier. > > ATDT9087514072 > > NO DIALTONE > > --> No dial tone. > > --> Disconnecting at Fri Apr 24 18:53:15 2009 > > default@default-desktop:/etc$ sudo wvdial > > --> WvDial: Internet dialer version 1.60 > > --> Cannot get information for serial port. > > --> Initializing modem. > > --> Sending: ATZ > > ATZ > > OK > > --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > > ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > > OK > > --> Modem initialized. > > --> Sending: ATDT9087514072 > > --> Waiting for carrier. > > ATDT9087514072 > > NO CARRIER > > --> No Carrier! Trying again. > > --> Sending: ATDT9087514072 > > --> Waiting for carrier. > > ATDT9087514072 > > BUSY > > --> The line is busy. Trying again. > > --> Sending: ATDT9087514072 > > --> Waiting for carrier. > > ATDT9087514072 > > NO DIALTONE > > --> No dial tone. > > --> Disconnecting at Fri Apr 24 18:53:58 2009 > > default@default-desktop:/etc$ sudo wvdial > > --> WvDial: Internet dialer version 1.60 > > --> Cannot get information for serial port. > > --> Initializing modem. > > --> Sending: ATZ > > ATZ > > OK > > --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > > ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > > OK > > --> Modem initialized. > > --> Sending: ATDT9087514072 > > --> Waiting for carrier. > > ATDT9087514072 > > NO CARRIER > > --> No Carrier! Trying again. > > --> Sending: ATDT9087514072 > > --> Waiting for carrier. > > ATDT9087514072 > > BUSY > > --> The line is busy. Trying again. > > --> Sending: ATDT9087514072 > > --> Waiting for carrier. > > ATDT9087514072 > > NO DIALTONE > > --> No dial tone. > > --> Disconnecting at Fri Apr 24 18:59:23 2009 > > default@default-desktop:/etc$ sudo wvdial > > --> WvDial: Internet dialer version 1.60 > > --> Cannot get information for serial port. > > --> Initializing modem. > > --> Sending: ATZ > > ATZ > > OK > > --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > > ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > > OK > > --> Modem initialized. > > --> Sending: ATDT9087514072 > > --> Waiting for carrier. > > ATDT9087514072 > > NO CARRIER > > --> No Carrier! Trying again. > > --> Sending: ATDT9087514072 > > --> Waiting for carrier. > > ATDT9087514072 > > BUSY > > --> The line is busy. Trying again. > > --> Sending: ATDT9087514072 > > --> Waiting for carrier. > > ATDT9087514072 > > NO DIALTONE > > --> No dial tone. > > --> Disconnecting at Fri Apr 24 18:53:15 2009 > > default@default-desktop:/etc$ sudo wvdial > > --> WvDial: Internet dialer version 1.60 > > --> Cannot get information for serial port. > > --> Initializing modem. > > --> Sending: ATZ > > ATZ > > OK > > --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > > ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > > OK > > --> Modem initialized. > > --> Sending: ATDT9087514072 > > --> Waiting for carrier. > > ATDT9087514072 > > NO CARRIER > > --> No Carrier! Trying again. > > --> Sending: ATDT9087514072 > > --> Waiting for carrier. > > ATDT9087514072 > > BUSY > > --> The line is busy. Trying again. > > --> Sending: ATDT9087514072 > > --> Waiting for carrier. > > ATDT9087514072 > > NO DIALTONE > > --> No dial tone. > > --> Disconnecting at Fri Apr 24 18:53:58 2009 > > default@default-desktop:/etc$ sudo wvdial > > --> WvDial: Internet dialer version 1.60 > > --> Cannot get information for serial port. > > --> Initializing modem. > > --> Sending: ATZ > > ATZ > > OK > > --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > > ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > > OK > > --> Modem initialized. > > --> Sending: ATDT9087514072 > > --> Waiting for carrier. > > ATDT9087514072 > > NO CARRIER > > --> No Carrier! Trying again. > > --> Sending: ATDT9087514072 > > --> Waiting for carrier. > > ATDT9087514072 > > BUSY > > --> The line is busy. Trying again. > > --> Sending: ATDT9087514072 > > --> Waiting for carrier. > > ATDT9087514072 > > NO DIALTONE > > --> No dial tone. > > --> Disconnecting at Fri Apr 24 18:59:23 2009 > > Still didn't work. > > > > I got the errors: > > > > default@default-desktop:/etc$ sudo wvdial > > --> WvDial: Internet dialer version 1.60 > > --> Cannot get information for serial port. > > --> Initializing modem. > > --> Sending: ATZ > > ATZ > > OK > > --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > > ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > > OK > > --> Modem initialized. > > --> Sending: ATDT9087514072 > > --> Waiting for carrier. > > ATDT9087514072 > > NO CARRIER > > --> No Carrier! Trying again. > > --> Sending: ATDT9087514072 > > --> Waiting for carrier. > > ATDT9087514072 > > BUSY > > --> The line is busy. Trying again. > > --> Sending: ATDT9087514072 > > --> Waiting for carrier. > > ATDT9087514072 > > NO DIALTONE > > --> No dial tone. > > --> Disconnecting at Fri Apr 24 18:53:15 2009 > > default@default-desktop:/etc$ sudo wvdial > > --> WvDial: Internet dialer version 1.60 > > --> Cannot get information for serial port. > > --> Initializing modem. > > --> Sending: ATZ > > ATZ > > OK > > --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > > ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > > OK > > --> Modem initialized. > > --> Sending: ATDT9087514072 > > --> Waiting for carrier. > > ATDT9087514072 > > NO CARRIER > > --> No Carrier! Trying again. > > --> Sending: ATDT9087514072 > > --> Waiting for carrier. > > ATDT9087514072 > > BUSY > > --> The line is busy. Trying again. > > --> Sending: ATDT9087514072 > > --> Waiting for carrier. > > ATDT9087514072 > > NO DIALTONE > > --> No dial tone. > > --> Disconnecting at Fri Apr 24 18:53:58 2009 > > default@default-desktop:/etc$ sudo wvdial > > --> WvDial: Internet dialer version 1.60 > > --> Cannot get information for serial port. > > --> Initializing modem. > > --> Sending: ATZ > > ATZ > > OK > > --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > > ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > > OK > > --> Modem initialized. > > --> Sending: ATDT9087514072 > > --> Waiting for carrier. > > ATDT9087514072 > > NO CARRIER > > --> No Carrier! Trying again. > > --> Sending: ATDT9087514072 > > --> Waiting for carrier. > > ATDT9087514072 > > BUSY > > --> The line is busy. Trying again. > > --> Sending: ATDT9087514072 > > --> Waiting for carrier. > > ATDT9087514072 > > NO DIALTONE > > --> No dial tone. > > --> Disconnecting at Fri Apr 24 18:59:23 2009 > > > > > > On Fri, 2009-04-24 at 08:38 -0400, Marvin Stodolsky wrote: > >> Try > >> > >> [Dialer Defaults] > >> Init1 = ATZ > >> Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > >> Modem Type = Analog Modem > >> Baud = 460800 > >> New PPPD = yes > >> Modem = /dev/ttySL0 > >> ISDN = 0 > >> Phone = 9087514072 > >> Password = password > >> Username = freegeek > >> # needed for /dev/pts/N ports > >> Carrier Check = no > >> # End wvdial.conf > >> > >> Please send to the List, not directly to me. > >> > >> MarvS > >> > >> On Fri, Apr 24, 2009 at 2:26 AM, Chris <tmail78@xxxxxxxxxxx> wrote: > >> > I may have spoke too soon. I got a dial-up account to test it and wasn't > >> > able to connect to the Internet. > >> > > >> > Here is what I did: > >> > > >> > > >> > default@default-desktop:~/d/SLMODEMD_gcc4.2_alsa1.0.17$ sudo slmodemd -c > >> > USA --alsa hw:0,6 > >> > SmartLink Soft Modem: version 2.9.11 Dec 16 2008 22:54:51 > >> > symbolic link `/dev/ttySL0' -> `/dev/pts/1' created. > >> > modem `hw:0,6' created. TTY is `/dev/pts/1' > >> > Use `/dev/ttySL0' as modem device, Ctrl+C for termination. > >> > > >> > > >> > /etc/wvdial.conf has: > >> > > >> > [Dialer Defaults] > >> > Init1 = ATZ > >> > Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > >> > Modem Type = Analog Modem > >> > Baud = 460800 > >> > New PPPD = yes > >> > Modem = /dev/ttySL0 > >> > ISDN = 0 > >> > Phone = 9087514072 > >> > Password = password > >> > Username = freegeek > >> > > >> > > >> > > >> > and then sudo wvdial: > >> > > >> > > >> > > >> > > >> > default@default-desktop:~/d/SLMODEMD_gcc4.2_alsa1.0.17$ sudo wvdial > >> > --> WvDial: Internet dialer version 1.60 > >> > --> Cannot get information for serial port. > >> > --> Initializing modem. > >> > --> Sending: ATZ > >> > ATZ > >> > OK > >> > --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > >> > ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > >> > OK > >> > --> Modem initialized. > >> > --> Sending: ATDT9087514072 > >> > --> Waiting for carrier. > >> > ATDT9087514072 > >> > NO CARRIER > >> > --> No Carrier! Trying again. > >> > --> Sending: ATDT9087514072 > >> > --> Waiting for carrier. > >> > ATDT9087514072 > >> > BUSY > >> > --> The line is busy. Trying again. > >> > --> Sending: ATDT9087514072 > >> > --> Waiting for carrier. > >> > ATDT9087514072 > >> > Caught signal 2: Attempting to exit gracefully... > >> > --> Disconnecting at Fri Apr 24 02:10:40 2009 > >> > > >> > > >> > > >> > > >> > > >> > On Thu, 2009-04-23 at 22:11 -0400, Marvin Stodolsky wrote: > >> >> THough it depends on your cell phone provider, I use the following to > >> >> get on line through T-Mobile > >> >> > >> >> [Dialer Defaults] > >> >> # are comment lines > >> >> # /etc/wvdial.conf > >> >> Init1 = ATZ > >> >> # Modem Identifier: ATI -- SAMSUNG SGH-T509, USB Modem > >> >> Init2 = AT+CGDCONT=1,"IP",internet2.voicestream.com > >> >> Phone = *99***1# > >> >> # the open source USB driver is: cdc_acm, for USB modems and ISDN > >> >> adapters > >> >> Modem = /dev/ttyACM0 > >> >> Baud = 460800 > >> >> ISDN = 0 > >> >> Username = marv > >> >> Password = not_necessary > >> >> # above two lines have to be there, though actually login and password > >> >> are not needed for T-Mobile > >> >> > >> >> MarvS > >> >> > >> >> > >> >> On Thu, Apr 23, 2009 at 9:42 PM, Chris <tmail78@xxxxxxxxxxx> wrote: > >> >> > The first dial test I did was successful. It was only to a cell > >> >> phone > >> >> > though- as I don't yet have a dial-up ISP to test with. > >> >> > > >> >> > Chris > >> >> > > >> >> > On Thu, 2009-04-23 at 18:32 -0400, Marvin Stodolsky wrote: > >> >> >> Chris, > >> >> >> > >> >> >> from http://linmodems.technion.ac.il/packages/smartlink/ > >> >> >> get the SLMODEMD_gcc4.2_alsa1.0.17.tar.gz > >> >> >> install and retest. > >> >> >> > >> >> >> MarvS > >> >> >> > >> >> >> On Wed, Apr 22, 2009 at 9:33 PM, Marvin Stodolsky > >> >> >> <marvin.stodolsky@xxxxxxxxx> wrote: > >> >> >> > On Wed, Apr 22, 2009 at 8:45 PM, Antonio Olivares > >> >> >> > <olivares14031@xxxxxxxxx> wrote: > >> >> >> >> > >> >> >> >> Chris, > >> >> >> > $ sudo slmodemd -c USA --alsa hw:0,6 > >> >> >> > > >> >> >> > Low level driver code is included in the snd-hda-intel driver. > >> >> >> > The non-driver slmodemd has the Smart COMM functions > >> >> >> > > >> >> >> > MarvS > >> >> >> > scanModem maintainer > >> >> >> > > >> >> >> >> > >> >> >> >> Do as scanModem recommends: > >> >> >> >> > >> >> >> >> Download from http://linmodems.technion.ac.il/packages/smartlink/ > >> >> >> >> the package SLMODEMD.gcc4.2.tar.gz having a compiled slmodemd. Unpack > >> >> >> >> under Linux with: > >> >> >> >> $ tar zxf SLMODEMD.gcc4.2.tar.gz > >> >> >> >> and read instructions therein. But briefly, the modem is setup with > >> >> >> >> command: > >> >> >> >> sudo slmodemd -c YOUR_COUNTRY --alsa hw:0,6 > >> >> >> >> reporting dynamic creation of ports: > >> >> >> >> /dev/ttySL0 --> /dev/pts/N , with N some number > >> >> >> >> Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow > >> >> >> >> through guidance. > >> >> >> >> > >> >> >> >> Regards, > >> >> >> >> > >> >> >> >> Antonio > >> >> >> >> > >> >> >> >> > >> >> >> >> --- On Wed, 4/22/09, Chris <tmail78@xxxxxxxxxxx> wrote: > >> >> >> >> > >> >> >> >>> From: Chris <tmail78@xxxxxxxxxxx> > >> >> >> >>> Subject: Chris, USA, kernel 2.6.24-23-generic > >> >> >> >>> To: discuss@xxxxxxxxxxxxx > >> >> >> >>> Date: Wednesday, April 22, 2009, 5:27 PM > >> >> >> >>> Ok- here is my ModemData.txt file. I am using Ubuntu 8.0.4 > >> >> >> >>> LTS. I am > >> >> >> >>> would appreciate assistance in getting this to work. The > >> >> >> >>> last time I > >> >> >> >>> setup a modem in GNU/Linux was in the 90's-and it was > >> >> >> >>> not a > >> >> >> >>> controller-less modem. The country that it needs to be > >> >> >> >>> setup for is the > >> >> >> >>> United States. > >> >> >> >>> > >> >> >> >>> Chris > >> >> >> >>> > >> >> >> >>> Only plain text email is forwarded by the > >> >> >> >>> Discuss@xxxxxxxxxxxxx List > >> >> >> >>> Server, > >> >> >> >>> as HTML can contain viruses. Use as the email Subject > >> >> >> >>> Line: > >> >> >> >>> YourName, YourCountry kernel 2.6.24-23-generic > >> >> >> >>> With this Subject Line cogent experts will be alerted, and > >> >> >> >>> useful case > >> >> >> >>> names left in the Archive. > >> >> >> >>> YourCountry will enable Country specific guidance. Linux > >> >> >> >>> experts in > >> >> >> >>> YourCountry > >> >> >> >>> can be found through: > >> >> >> >>> http://www.linux.org/groups/index.html. > >> >> >> >>> They will know your Country's modem code, which may be > >> >> >> >>> essential for > >> >> >> >>> dialup service. > >> >> >> >>> Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked > >> >> >> >>> by an > >> >> >> >>> Internet Provider mail filters. > >> >> >> >>> So in a day, also check the Archived responses at > >> >> >> >>> http://www.linmodems.org > >> >> >> >>> -------------------------- System information > >> >> >> >>> ---------------------------- > >> >> >> >>> CPU=i686, > >> >> >> >>> Linux version 2.6.24-23-generic (buildd@palmer) (gcc > >> >> >> >>> version 4.2.4 > >> >> >> >>> (Ubuntu 4.2.4-1ubuntu3)) #1 SMP Wed Apr 1 21:47:28 UTC 2009 > >> >> >> >>> scanModem update of: 2009_04_11 > >> >> >> >>> > >> >> >> >>> There are no blacklisted modem drivers in /etc/modprobe* > >> >> >> >>> files > >> >> >> >>> Potentially useful modem drivers now loaded are: > >> >> >> >>> snd_hda_intel > >> >> >> >>> > >> >> >> >>> Attached USB devices are: > >> >> >> >>> ID 0bda:0158 Realtek Semiconductor Corp. > >> >> >> >>> ID 5986:0203 Bison > >> >> >> >>> If a cellphone is not detected, see > >> >> >> >>> http://ubuntuforums.org/archive/index.php/t-878554.html > >> >> >> >>> > >> >> >> >>> If a USB modem or cellphone is attached and was not > >> >> >> >>> detected, please > >> >> >> >>> provide available information in your request to > >> >> >> >>> discuss@xxxxxxxxxxxxx > >> >> >> >>> > >> >> >> >>> For candidate card in slot 00:1b.0, firmware information > >> >> >> >>> and bootup > >> >> >> >>> diagnostics are: > >> >> >> >>> PCI slot PCI ID SubsystemID Name > >> >> >> >>> ---------- --------- --------- -------------- > >> >> >> >>> 00:1b.0 8086:293e 1462:63f5 Audio device: Intel > >> >> >> >>> Corporation 82801I > >> >> >> >>> > >> >> >> >>> Modem interrupt assignment and sharing: > >> >> >> >>> 22: 594 619 IO-APIC-fasteoi HDA Intel > >> >> >> >>> --- Bootup diagnostics for card in PCI slot 00:1b.0 ---- > >> >> >> >>> [ 27.100034] ACPI: PCI Interrupt 0000:00:1b.0[A] -> > >> >> >> >>> GSI 22 (level, > >> >> >> >>> low) -> IRQ 22 > >> >> >> >>> [ 27.100052] PCI: Setting latency timer of device > >> >> >> >>> 0000:00:1b.0 to 64 > >> >> >> >>> > >> >> >> >>> > >> >> >> >>> ===== Advanced Linux Sound Architecture (ALSA) diagnostics > >> >> >> >>> ===== > >> >> >> >>> The ALSA packages provide audio support and also drivers > >> >> >> >>> for some > >> >> >> >>> modems. > >> >> >> >>> ALSA diagnostics are written during bootup to /proc/asound/ > >> >> >> >>> folders. > >> >> >> >>> > >> >> >> >>> The ALSA verion is 1.0.16 > >> >> >> >>> The modem cards detected by "aplay -l" are: > >> >> >> >>> card 0: Intel [HDA Intel], device 6: Si3054 Modem [Si3054 > >> >> >> >>> Modem] > >> >> >> >>> > >> >> >> >>> The /proc/asound/pcm file reports: > >> >> >> >>> ----------------------- > >> >> >> >>> 00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1 > >> >> >> >>> 00-04: ALC883 Analog : ALC883 Analog : capture 1 > >> >> >> >>> 00-00: ALC883 Analog : ALC883 Analog : playback 1 : capture > >> >> >> >>> 1 > >> >> >> >>> > >> >> >> >>> about /proc/asound/cards: > >> >> >> >>> ------------------------ > >> >> >> >>> 0 [Intel ]: HDA-Intel - HDA Intel > >> >> >> >>> HDA Intel at 0xfdef8000 irq 22 > >> >> >> >>> > >> >> >> >>> PCI slot 00:1b.0 has a High Definition Audio Card > >> >> >> >>> The drivers are in the kernel modules tree at: > >> >> >> >>> > >> >> >> >>> /lib/modules/2.6.24-16-generic/ubuntu/sound/alsa-driver/pci/hda/snd-hda-intel.ko > >> >> >> >>> /lib/modules/2.6.24-23-generic/ubuntu/sound/alsa-driver/pci/hda/snd-hda-intel.ko > >> >> >> >>> The modem codec file for the HDA card is: > >> >> >> >>> /proc/asound/card0/codec#1 > >> >> >> >>> -------------------------------------------------------- > >> >> >> >>> Codec: Motorola Si3054 > >> >> >> >>> Address: 1 > >> >> >> >>> Vendor Id: 0x10573055 > >> >> >> >>> Subsystem Id: 0x305557 > >> >> >> >>> Revision Id: 0x100900 > >> >> >> >>> Modem Function Group: 0x1 > >> >> >> >>> > >> >> >> >>> The audio card hosts a softmodem chip: 0x10573055 > >> >> >> >>> > >> >> >> >>> The softmodem chip 0x10573055 is in principle supported by > >> >> >> >>> the COMM > >> >> >> >>> support of slmodemd > >> >> >> >>> and the joint snd-hda-intel audio+modem driver, begun with > >> >> >> >>> ALSA version > >> >> >> >>> 1.0.13. > >> >> >> >>> For HDA cards with ALC883 chips, an upgrade to ALSA verions > >> >> >> >>> 1.0.15 way > >> >> >> >>> be necessary. Instructions for Upgrading snd-hda-intel and > >> >> >> >>> its dependent > >> >> >> >>> driver set are at: > >> >> >> >>> http://linmodems.technion.ac.il/bigarch/archive-eighth/msg00838.html > >> >> >> >>> > >> >> >> >>> If not a Conexant modem, the driver snd-hda-intel with its > >> >> >> >>> dependent > >> >> >> >>> drivers: > >> >> >> >>> snd_hda_intel 346136 3 > >> >> >> >>> snd_pcm 78596 2 snd_hda_intel,snd_pcm_oss > >> >> >> >>> snd_page_alloc 11400 2 snd_hda_intel,snd_pcm > >> >> >> >>> snd_hwdep 10500 1 snd_hda_intel > >> >> >> >>> snd 56996 17 > >> >> >> >>> snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_hwdep,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device > >> >> >> >>> ---------- > >> >> >> >>> provide audio + modem support with the modem chip residing > >> >> >> >>> on the > >> >> >> >>> subsystem. > >> >> >> >>> Any particular card can host any one of several soft modem > >> >> >> >>> chips. > >> >> >> >>> > >> >> >> >>> === Finished firmware and bootup diagnostics, next deducing > >> >> >> >>> cogent > >> >> >> >>> software. === > >> >> >> >>> > >> >> >> >>> Predictive diagnostics for card in bus 00:1b.0: > >> >> >> >>> Modem chipset detected on > >> >> >> >>> NAME="Audio device: Intel Corporation 82801I " > >> >> >> >>> CLASS=0403 > >> >> >> >>> PCIDEV=8086:293e > >> >> >> >>> SUBSYS=1462:63f5 > >> >> >> >>> IRQ=22 > >> >> >> >>> HDA=8086:293e > >> >> >> >>> SOFT=8086:293e.HDA > >> >> >> >>> CHIP=0x10573055 > >> >> >> >>> IDENT=slmodemd > >> >> >> >>> SLMODEMD_DEVICE=hw:0,6 > >> >> >> >>> Driver=snd-hda-intel > >> >> >> >>> > >> >> >> >>> For candidate modem in: 00:1b.0 > >> >> >> >>> 0403 Audio device: Intel Corporation 82801I > >> >> >> >>> Primary device ID: 8086:293e > >> >> >> >>> Subsystem PCI_id 1462:63f5 > >> >> >> >>> Softmodem codec or chipset from diagnostics: 0x10573055 > >> >> >> >>> from Archives: > >> >> >> >>> The HDA card softmodem chip is > >> >> >> >>> 0x10573055 > >> >> >> >>> > >> >> >> >>> > >> >> >> >>> Support type needed or chipset: slmodemd supporting the > >> >> >> >>> snd-hda-intel > >> >> >> >>> audio+modem driver > >> >> >> >>> > >> >> >> >>> An ALSA (Advanced Linux Sound Architecture) modem driver: > >> >> >> >>> snd-hda-intel > >> >> >> >>> provides Low Level support enabling contact with the modem > >> >> >> >>> hardware. > >> >> >> >>> For all BUT Conexant chip soft modems (using hsfmodem > >> >> >> >>> software) > >> >> >> >>> complementary High Level support is through a Smartlink > >> >> >> >>> utility: > >> >> >> >>> slmodemd > >> >> >> >>> > >> >> >> >>> Download from > >> >> >> >>> http://linmodems.technion.ac.il/packages/smartlink/ > >> >> >> >>> the package SLMODEMD.gcc4.2.tar.gz having a compiled > >> >> >> >>> slmodemd. Unpack > >> >> >> >>> under Linux with: > >> >> >> >>> $ tar zxf SLMODEMD.gcc4.2.tar.gz > >> >> >> >>> and read instructions therein. But briefly, the modem is > >> >> >> >>> setup with > >> >> >> >>> command: > >> >> >> >>> sudo slmodemd -c YOUR_COUNTRY --alsa hw:0,6 > >> >> >> >>> reporting dynamic creation of ports: > >> >> >> >>> /dev/ttySL0 --> /dev/pts/N , with N some number > >> >> >> >>> Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for > >> >> >> >>> follow > >> >> >> >>> through guidance. > >> >> >> >>> > >> >> >> >>> > >> >> >> >>> Writing DOCs/Intel.txt > >> >> >> >>> Writing DOCs/Smartlink.txt > >> >> >> >>> ============ end Smartlink section ===================== > >> >> >> >>> > >> >> >> >>> Completed candidate modem analyses. > >> >> >> >>> > >> >> >> >>> The base of the UDEV device file system is: /dev/.udev > >> >> >> >>> > >> >> >> >>> Versions adequately match for the compiler installed: > >> >> >> >>> 4.2.4 > >> >> >> >>> and the compiler used in kernel assembly: > >> >> >> >>> 4.2.4 > >> >> >> >>> > >> >> >> >>> The patch utility is needed and is needed for compiling > >> >> >> >>> ALSA drivers, > >> >> >> >>> and possibly others. > >> >> >> >>> > >> >> >> >>> > >> >> >> >>> Minimal compiling resources appear complete: > >> >> >> >>> make utility - /usr/bin/make > >> >> >> >>> Compiler version 4.2 > >> >> >> >>> linuc_headers base folder > >> >> >> >>> /lib/modules/2.6.24-23-generic/build > >> >> >> >>> > >> >> >> >>> However some compilations and executable functions may > >> >> >> >>> need additional > >> >> >> >>> files, > >> >> >> >>> in the FileNames.h (so called kernel "h"eaders) > >> >> >> >>> collection installed > >> >> >> >>> in /usr/include/ . > >> >> >> >>> For martian_modem, additional required packages are > >> >> >> >>> needed. The also > >> >> >> >>> required headers of package libc6 are commonly installed by > >> >> >> >>> default. > >> >> >> >>> Compiling hsfmodem drivers does require linux-libc-dev and > >> >> >> >>> libc6-dev > >> >> >> >>> packages, for kernels 2.6.24 and later versions. > >> >> >> >>> In not included on your install CD, search for them at > >> >> >> >>> http://packages.ubuntu.com > >> >> >> >>> or comparable Repository for other Linux distros. > >> >> >> >>> When compiling ALSA drivers, the utility "patch" > >> >> >> >>> will also be needed. > >> >> >> >>> > >> >> >> >>> > >> >> >> >>> > >> >> >> >>> > >> >> >> >>> If a driver compilation fails, with message including some > >> >> >> >>> lack of some > >> >> >> >>> FileName.h (stdio.h for example), then > >> >> >> >>> Some additional kernel-header files need installation to > >> >> >> >>> /usr/include. > >> >> >> >>> The minimal additional packages are libc6-dev > >> >> >> >>> and any of its dependents, under Ubuntu linux-libc-dev > >> >> >> >>> > >> >> >> >>> If an alternate ethernet connection is available, > >> >> >> >>> $ apt-get update > >> >> >> >>> $ apt-get -s install linux-kernel-devel > >> >> >> >>> will install needed packages. > >> >> >> >>> For Debian/Ubuntu related distributions, run the following > >> >> >> >>> command to > >> >> >> >>> display the needed package list: > >> >> >> >>> > >> >> >> >>> Otherwise packages have to be found through > >> >> >> >>> http://packages.ubuntu.com > >> >> >> >>> Once downloaded and transferred into a Linux partition, > >> >> >> >>> they can be installed alltogether with: > >> >> >> >>> $ sudo dpkg -i *.deb > >> >> >> >>> > >> >> >> >>> > >> >> >> >>> Checking pppd properties: > >> >> >> >>> -rwsr-xr-- 1 root dip 269256 2007-10-04 15:57 > >> >> >> >>> /usr/sbin/pppd > >> >> >> >>> > >> >> >> >>> In case of an "error 17" "serial > >> >> >> >>> loopback" problem, see: > >> >> >> >>> > >> >> >> >>> http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html > >> >> >> >>> > >> >> >> >>> To enable dialout without Root permission do: > >> >> >> >>> $ su - root (not for Ubuntu) > >> >> >> >>> sudo chmod a+x /usr/sbin/pppd > >> >> >> >>> or under Ubuntu related Linuxes > >> >> >> >>> sudo chmod a+x /usr/sbin/pppd > >> >> >> >>> > >> >> >> >>> Checking settings of: /etc/ppp/options > >> >> >> >>> asyncmap 0 > >> >> >> >>> noauth > >> >> >> >>> crtscts > >> >> >> >>> lock > >> >> >> >>> hide-password > >> >> >> >>> modem > >> >> >> >>> proxyarp > >> >> >> >>> lcp-echo-interval 30 > >> >> >> >>> lcp-echo-failure 4 > >> >> >> >>> noipx > >> >> >> >>> > >> >> >> >>> In case of a message like: > >> >> >> >>> Warning: Could not modify /etc/ppp/pap-secrets: > >> >> >> >>> Permission denied > >> >> >> >>> see > >> >> >> >>> http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html > >> >> >> >>> > >> >> >> >>> Read Modem/DOCs/YourSystem.txt concerning other COMM > >> >> >> >>> channels: eth1 > >> >> >> >>> Which can interfere with Browser naviagation. > >> >> >> >>> > >> >> >> >>> Don't worry about the following, it is for experts > >> >> >> >>> should trouble > >> >> >> >>> shooting be necessary. > >> >> >> >>> ========================================================== > >> >> >> >>> > >> >> >> >>> Checking for modem support lines: > >> >> >> >>> -------------------------------------- > >> >> >> >>> /device/modem symbolic link: > >> >> >> >>> slmodemd created symbolic link /dev/ttySL0: > >> >> >> >>> Within /etc/udev/ files: > >> >> >> >>> > >> >> >> >>> Within /etc/modprobe.conf files: > >> >> >> >>> /etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2 > >> >> >> >>> /etc/modprobe.d/alsa-base:options snd-via82xx-modem > >> >> >> >>> index=-2 > >> >> >> >>> /etc/modprobe.d/blacklist-modem:# Uncomment these entries > >> >> >> >>> in order to > >> >> >> >>> blacklist unwanted modem drivers > >> >> >> >>> /etc/modprobe.d/blacklist-modem:# blacklist > >> >> >> >>> snd-atiixp-modem > >> >> >> >>> /etc/modprobe.d/blacklist-modem:# blacklist > >> >> >> >>> snd-via82xx-modem > >> >> >> >>> Within any ancient /etc/devfs files: > >> >> >> >>> > >> >> >> >>> Within ancient kernel 2.4.n /etc/module.conf files: > >> >> >> >>> > >> >> >> >>> --------- end modem support lines -------- > >> >> >> >>> Only plain text email is forwarded by the > >> >> >> >>> Discuss@xxxxxxxxxxxxx List > >> >> >> >>> Server, > >> >> >> >>> as HTML can contain viruses. Use as the email Subject > >> >> >> >>> Line: > >> >> >> >>> YourName, YourCountry kernel 2.6.24-23-generic > >> >> >> >>> With this Subject Line cogent experts will be alerted, and > >> >> >> >>> useful case > >> >> >> >>> names left in the Archive. > >> >> >> >>> YourCountry will enable Country specific guidance. Linux > >> >> >> >>> experts in > >> >> >> >>> YourCountry > >> >> >> >>> can be found through: > >> >> >> >>> http://www.linux.org/groups/index.html. > >> >> >> >>> They will know your Country's modem code, which may be > >> >> >> >>> essential for > >> >> >> >>> dialup service. > >> >> >> >>> Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked > >> >> >> >>> by an > >> >> >> >>> Internet Provider mail filters. > >> >> >> >>> So in a day, also check the Archived responses at > >> >> >> >>> http://www.linmodems.org > >> >> >> >>> -------------------------- System information > >> >> >> >>> ---------------------------- > >> >> >> >>> CPU=i686, > >> >> >> >>> Linux version 2.6.24-23-generic (buildd@palmer) (gcc > >> >> >> >>> version 4.2.4 > >> >> >> >>> (Ubuntu 4.2.4-1ubuntu3)) #1 SMP Wed Apr 1 21:47:28 UTC 2009 > >> >> >> >>> scanModem update of: 2009_04_11 > >> >> >> >>> > >> >> >> >>> There are no blacklisted modem drivers in /etc/modprobe* > >> >> >> >>> files > >> >> >> >>> Potentially useful modem drivers now loaded are: > >> >> >> >>> snd_hda_intel > >> >> >> >>> > >> >> >> >>> Attached USB devices are: > >> >> >> >>> ID 0bda:0158 Realtek Semiconductor Corp. > >> >> >> >>> ID 5986:0203 Bison > >> >> >> >>> If a cellphone is not detected, see > >> >> >> >>> http://ubuntuforums.org/archive/index.php/t-878554.html > >> >> >> >>> > >> >> >> >>> If a USB modem or cellphone is attached and was not > >> >> >> >>> detected, please > >> >> >> >>> provide available information in your request to > >> >> >> >>> discuss@xxxxxxxxxxxxx > >> >> >> >>> > >> >> >> >>> For candidate card in slot 00:1b.0, firmware information > >> >> >> >>> and bootup > >> >> >> >>> diagnostics are: > >> >> >> >>> PCI slot PCI ID SubsystemID Name > >> >> >> >>> ---------- --------- --------- -------------- > >> >> >> >>> 00:1b.0 8086:293e 1462:63f5 Audio device: Intel > >> >> >> >>> Corporation 82801I > >> >> >> >>> > >> >> >> >>> Modem interrupt assignment and sharing: > >> >> >> >>> 22: 594 619 IO-APIC-fasteoi HDA Intel > >> >> >> >>> --- Bootup diagnostics for card in PCI slot 00:1b.0 ---- > >> >> >> >>> [ 27.100034] ACPI: PCI Interrupt 0000:00:1b.0[A] -> > >> >> >> >>> GSI 22 (level, > >> >> >> >>> low) -> IRQ 22 > >> >> >> >>> [ 27.100052] PCI: Setting latency timer of device > >> >> >> >>> 0000:00:1b.0 to 64 > >> >> >> >>> > >> >> >> >>> > >> >> >> >>> ===== Advanced Linux Sound Architecture (ALSA) diagnostics > >> >> >> >>> ===== > >> >> >> >>> The ALSA packages provide audio support and also drivers > >> >> >> >>> for some > >> >> >> >>> modems. > >> >> >> >>> ALSA diagnostics are written during bootup to /proc/asound/ > >> >> >> >>> folders. > >> >> >> >>> > >> >> >> >>> The ALSA verion is 1.0.16 > >> >> >> >>> The modem cards detected by "aplay -l" are: > >> >> >> >>> card 0: Intel [HDA Intel], device 6: Si3054 Modem [Si3054 > >> >> >> >>> Modem] > >> >> >> >>> > >> >> >> >>> The /proc/asound/pcm file reports: > >> >> >> >>> ----------------------- > >> >> >> >>> 00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1 > >> >> >> >>> 00-04: ALC883 Analog : ALC883 Analog : capture 1 > >> >> >> >>> 00-00: ALC883 Analog : ALC883 Analog : playback 1 : capture > >> >> >> >>> 1 > >> >> >> >>> > >> >> >> >>> about /proc/asound/cards: > >> >> >> >>> ------------------------ > >> >> >> >>> 0 [Intel ]: HDA-Intel - HDA Intel > >> >> >> >>> HDA Intel at 0xfdef8000 irq 22 > >> >> >> >>> > >> >> >> >>> PCI slot 00:1b.0 has a High Definition Audio Card > >> >> >> >>> The drivers are in the kernel modules tree at: > >> >> >> >>> > >> >> >> >>> /lib/modules/2.6.24-16-generic/ubuntu/sound/alsa-driver/pci/hda/snd-hda-intel.ko > >> >> >> >>> /lib/modules/2.6.24-23-generic/ubuntu/sound/alsa-driver/pci/hda/snd-hda-intel.ko > >> >> >> >>> The modem codec file for the HDA card is: > >> >> >> >>> /proc/asound/card0/codec#1 > >> >> >> >>> -------------------------------------------------------- > >> >> >> >>> Codec: Motorola Si3054 > >> >> >> >>> Address: 1 > >> >> >> >>> Vendor Id: 0x10573055 > >> >> >> >>> Subsystem Id: 0x305557 > >> >> >> >>> Revision Id: 0x100900 > >> >> >> >>> Modem Function Group: 0x1 > >> >> >> >>> > >> >> >> >>> The audio card hosts a softmodem chip: 0x10573055 > >> >> >> >>> > >> >> >> >>> The softmodem chip 0x10573055 is in principle supported by > >> >> >> >>> the COMM > >> >> >> >>> support of slmodemd > >> >> >> >>> and the joint snd-hda-intel audio+modem driver, begun with > >> >> >> >>> ALSA version > >> >> >> >>> 1.0.13. > >> >> >> >>> For HDA cards with ALC883 chips, an upgrade to ALSA verions > >> >> >> >>> 1.0.15 way > >> >> >> >>> be necessary. Instructions for Upgrading snd-hda-intel and > >> >> >> >>> its dependent > >> >> >> >>> driver set are at: > >> >> >> >>> http://linmodems.technion.ac.il/bigarch/archive-eighth/msg00838.html > >> >> >> >>> > >> >> >> >>> If not a Conexant modem, the driver snd-hda-intel with its > >> >> >> >>> dependent > >> >> >> >>> drivers: > >> >> >> >>> snd_hda_intel 346136 3 > >> >> >> >>> snd_pcm 78596 2 snd_hda_intel,snd_pcm_oss > >> >> >> >>> snd_page_alloc 11400 2 snd_hda_intel,snd_pcm > >> >> >> >>> snd_hwdep 10500 1 snd_hda_intel > >> >> >> >>> snd 56996 17 > >> >> >> >>> snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_hwdep,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device > >> >> >> >>> ---------- > >> >> >> >>> provide audio + modem support with the modem chip residing > >> >> >> >>> on the > >> >> >> >>> subsystem. > >> >> >> >>> Any particular card can host any one of several soft modem > >> >> >> >>> chips. > >> >> >> >>> > >> >> >> >>> === Finished firmware and bootup diagnostics, next deducing > >> >> >> >>> cogent > >> >> >> >>> software. === > >> >> >> >>> > >> >> >> >>> Predictive diagnostics for card in bus 00:1b.0: > >> >> >> >>> Modem chipset detected on > >> >> >> >>> NAME="Audio device: Intel Corporation 82801I " > >> >> >> >>> CLASS=0403 > >> >> >> >>> PCIDEV=8086:293e > >> >> >> >>> SUBSYS=1462:63f5 > >> >> >> >>> IRQ=22 > >> >> >> >>> HDA=8086:293e > >> >> >> >>> SOFT=8086:293e.HDA > >> >> >> >>> CHIP=0x10573055 > >> >> >> >>> IDENT=slmodemd > >> >> >> >>> SLMODEMD_DEVICE=hw:0,6 > >> >> >> >>> Driver=snd-hda-intel > >> >> >> >>> > >> >> >> >>> For candidate modem in: 00:1b.0 > >> >> >> >>> 0403 Audio device: Intel Corporation 82801I > >> >> >> >>> Primary device ID: 8086:293e > >> >> >> >>> Subsystem PCI_id 1462:63f5 > >> >> >> >>> Softmodem codec or chipset from diagnostics: 0x10573055 > >> >> >> >>> from Archives: > >> >> >> >>> The HDA card softmodem chip is > >> >> >> >>> 0x10573055 > >> >> >> >>> > >> >> >> >>> > >> >> >> >>> Support type needed or chipset: slmodemd supporting the > >> >> >> >>> snd-hda-intel > >> >> >> >>> audio+modem driver > >> >> >> >>> > >> >> >> >>> An ALSA (Advanced Linux Sound Architecture) modem driver: > >> >> >> >>> snd-hda-intel > >> >> >> >>> provides Low Level support enabling contact with the modem > >> >> >> >>> hardware. > >> >> >> >>> For all BUT Conexant chip soft modems (using hsfmodem > >> >> >> >>> software) > >> >> >> >>> complementary High Level support is through a Smartlink > >> >> >> >>> utility: > >> >> >> >>> slmodemd > >> >> >> >>> > >> >> >> >>> Download from > >> >> >> >>> http://linmodems.technion.ac.il/packages/smartlink/ > >> >> >> >>> the package SLMODEMD.gcc4.2.tar.gz having a compiled > >> >> >> >>> slmodemd. Unpack > >> >> >> >>> under Linux with: > >> >> >> >>> $ tar zxf SLMODEMD.gcc4.2.tar.gz > >> >> >> >>> and read instructions therein. But briefly, the modem is > >> >> >> >>> setup with > >> >> >> >>> command: > >> >> >> >>> sudo slmodemd -c YOUR_COUNTRY --alsa hw:0,6 > >> >> >> >>> reporting dynamic creation of ports: > >> >> >> >>> /dev/ttySL0 --> /dev/pts/N , with N some number > >> >> >> >>> Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for > >> >> >> >>> follow > >> >> >> >>> through guidance. > >> >> >> >>> > >> >> >> >>> > >> >> >> >>> Writing DOCs/Intel.txt > >> >> >> >>> Writing DOCs/Smartlink.txt > >> >> >> >>> ============ end Smartlink section ===================== > >> >> >> >>> > >> >> >> >>> Completed candidate modem analyses. > >> >> >> >>> > >> >> >> >>> The base of the UDEV device file system is: /dev/.udev > >> >> >> >>> > >> >> >> >>> Versions adequately match for the compiler installed: > >> >> >> >>> 4.2.4 > >> >> >> >>> and the compiler used in kernel assembly: > >> >> >> >>> 4.2.4 > >> >> >> >>> > >> >> >> >>> The patch utility is needed and is needed for compiling > >> >> >> >>> ALSA drivers, > >> >> >> >>> and possibly others. > >> >> >> >>> > >> >> >> >>> > >> >> >> >>> Minimal compiling resources appear complete: > >> >> >> >>> make utility - /usr/bin/make > >> >> >> >>> Compiler version 4.2 > >> >> >> >>> linuc_headers base folder > >> >> >> >>> /lib/modules/2.6.24-23-generic/build > >> >> >> >>> > >> >> >> >>> However some compilations and executable functions may > >> >> >> >>> need additional > >> >> >> >>> files, > >> >> >> >>> in the FileNames.h (so called kernel "h"eaders) > >> >> >> >>> collection installed > >> >> >> >>> in /usr/include/ . > >> >> >> >>> For martian_modem, additional required packages are > >> >> >> >>> needed. The also > >> >> >> >>> required headers of package libc6 are commonly installed by > >> >> >> >>> default. > >> >> >> >>> Compiling hsfmodem drivers does require linux-libc-dev and > >> >> >> >>> libc6-dev > >> >> >> >>> packages, for kernels 2.6.24 and later versions. > >> >> >> >>> In not included on your install CD, search for them at > >> >> >> >>> http://packages.ubuntu.com > >> >> >> >>> or comparable Repository for other Linux distros. > >> >> >> >>> When compiling ALSA drivers, the utility "patch" > >> >> >> >>> will also be needed. > >> >> >> >>> > >> >> >> >>> > >> >> >> >>> > >> >> >> >>> > >> >> >> >>> If a driver compilation fails, with message including some > >> >> >> >>> lack of some > >> >> >> >>> FileName.h (stdio.h for example), then > >> >> >> >>> Some additional kernel-header files need installation to > >> >> >> >>> /usr/include. > >> >> >> >>> The minimal additional packages are libc6-dev > >> >> >> >>> and any of its dependents, under Ubuntu linux-libc-dev > >> >> >> >>> > >> >> >> >>> If an alternate ethernet connection is available, > >> >> >> >>> $ apt-get update > >> >> >> >>> $ apt-get -s install linux-kernel-devel > >> >> >> >>> will install needed packages. > >> >> >> >>> For Debian/Ubuntu related distributions, run the following > >> >> >> >>> command to > >> >> >> >>> display the needed package list: > >> >> >> >>> > >> >> >> >>> Otherwise packages have to be found through > >> >> >> >>> http://packages.ubuntu.com > >> >> >> >>> Once downloaded and transferred into a Linux partition, > >> >> >> >>> they can be installed alltogether with: > >> >> >> >>> $ sudo dpkg -i *.deb > >> >> >> >>> > >> >> >> >>> > >> >> >> >>> Checking pppd properties: > >> >> >> >>> -rwsr-xr-- 1 root dip 269256 2007-10-04 15:57 > >> >> >> >>> /usr/sbin/pppd > >> >> >> >>> > >> >> >> >>> In case of an "error 17" "serial > >> >> >> >>> loopback" problem, see: > >> >> >> >>> > >> >> >> >>> http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html > >> >> >> >>> > >> >> >> >>> To enable dialout without Root permission do: > >> >> >> >>> $ su - root (not for Ubuntu) > >> >> >> >>> sudo chmod a+x /usr/sbin/pppd > >> >> >> >>> or under Ubuntu related Linuxes > >> >> >> >>> sudo chmod a+x /usr/sbin/pppd > >> >> >> >>> > >> >> >> >>> Checking settings of: /etc/ppp/options > >> >> >> >>> asyncmap 0 > >> >> >> >>> noauth > >> >> >> >>> crtscts > >> >> >> >>> lock > >> >> >> >>> hide-password > >> >> >> >>> modem > >> >> >> >>> proxyarp > >> >> >> >>> lcp-echo-interval 30 > >> >> >> >>> lcp-echo-failure 4 > >> >> >> >>> noipx > >> >> >> >>> > >> >> >> >>> In case of a message like: > >> >> >> >>> Warning: Could not modify /etc/ppp/pap-secrets: > >> >> >> >>> Permission denied > >> >> >> >>> see > >> >> >> >>> http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html > >> >> >> >>> > >> >> >> >>> Read Modem/DOCs/YourSystem.txt concerning other COMM > >> >> >> >>> channels: eth1 > >> >> >> >>> Which can interfere with Browser naviagation. > >> >> >> >>> > >> >> >> >>> Don't worry about the following, it is for experts > >> >> >> >>> should trouble > >> >> >> >>> shooting be necessary. > >> >> >> >>> ========================================================== > >> >> >> >>> > >> >> >> >>> Checking for modem support lines: > >> >> >> >>> -------------------------------------- > >> >> >> >>> /device/modem symbolic link: > >> >> >> >>> slmodemd created symbolic link /dev/ttySL0: > >> >> >> >>> Within /etc/udev/ files: > >> >> >> >>> > >> >> >> >>> Within /etc/modprobe.conf files: > >> >> >> >>> /etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2 > >> >> >> >>> /etc/modprobe.d/alsa-base:options snd-via82xx-modem > >> >> >> >>> index=-2 > >> >> >> >>> /etc/modprobe.d/blacklist-modem:# Uncomment these entries > >> >> >> >>> in order to > >> >> >> >>> blacklist unwanted modem drivers > >> >> >> >>> /etc/modprobe.d/blacklist-modem:# blacklist > >> >> >> >>> snd-atiixp-modem > >> >> >> >>> /etc/modprobe.d/blacklist-modem:# blacklist > >> >> >> >>> snd-via82xx-modem > >> >> >> >>> Within any ancient /etc/devfs files: > >> >> >> >>> > >> >> >> >>> Within ancient kernel 2.4.n /etc/module.conf files: > >> >> >> >>> > >> >> >> >>> --------- end modem support lines -------- > >> >> >> >>> for is the United States. > >> >> >> >>> > >> >> >> >>> > >> >> >> >>> > >> >> >> >>> Only plain text email is forwarded by the > >> >> >> >>> Discuss@xxxxxxxxxxxxx List > >> >> >> >>> Server, > >> >> >> >>> as HTML can contain viruses. Use as the email Subject > >> >> >> >>> Line: > >> >> >> >>> YourName, YourCountry kernel 2.6.24-23-generic > >> >> >> >>> With this Subject Line cogent experts will be alerted, and > >> >> >> >>> useful case > >> >> >> >>> names left in the Archive. > >> >> >> >>> YourCountry will enable Country specific guidance. Linux > >> >> >> >>> experts in > >> >> >> >>> YourCountry > >> >> >> >>> can be found through: > >> >> >> >>> http://www.linux.org/groups/index.html. > >> >> >> >>> They will know your Country's modem code, which may be > >> >> >> >>> essential for > >> >> >> >>> dialup service. > >> >> >> >>> Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked > >> >> >> >>> by an > >> >> >> >>> Internet Provider mail filters. > >> >> >> >>> So in a day, also check the Archived responses at > >> >> >> >>> http://www.linmodems.org > >> >> >> >>> -------------------------- System information > >> >> >> >>> ---------------------------- > >> >> >> >>> CPU=i686, > >> >> >> >>> Linux version 2.6.24-23-generic (buildd@palmer) (gcc > >> >> >> >>> version 4.2.4 > >> >> >> >>> (Ubuntu 4.2.4-1ubuntu3)) #1 SMP Wed Apr 1 21:47:28 UTC 2009 > >> >> >> >>> scanModem update of: 2009_04_11 > >> >> >> >>> > >> >> >> >>> There are no blacklisted modem drivers in /etc/modprobe* > >> >> >> >>> files > >> >> >> >>> Potentially useful modem drivers now loaded are: > >> >> >> >>> snd_hda_intel > >> >> >> >>> > >> >> >> >>> Attached USB devices are: > >> >> >> >>> ID 0bda:0158 Realtek Semiconductor Corp. > >> >> >> >>> ID 5986:0203 Bison > >> >> >> >>> If a cellphone is not detected, see > >> >> >> >>> http://ubuntuforums.org/archive/index.php/t-878554.html > >> >> >> >>> > >> >> >> >>> If a USB modem or cellphone is attached and was not > >> >> >> >>> detected, please > >> >> >> >>> provide available information in your request to > >> >> >> >>> discuss@xxxxxxxxxxxxx > >> >> >> >>> > >> >> >> >>> For candidate card in slot 00:1b.0, firmware information > >> >> >> >>> and bootup > >> >> >> >>> diagnostics are: > >> >> >> >>> PCI slot PCI ID SubsystemID Name > >> >> >> >>> ---------- --------- --------- -------------- > >> >> >> >>> 00:1b.0 8086:293e 1462:63f5 Audio device: Intel > >> >> >> >>> Corporation 82801I > >> >> >> >>> > >> >> >> >>> Modem interrupt assignment and sharing: > >> >> >> >>> 22: 594 619 IO-APIC-fasteoi HDA Intel > >> >> >> >>> --- Bootup diagnostics for card in PCI slot 00:1b.0 ---- > >> >> >> >>> [ 27.100034] ACPI: PCI Interrupt 0000:00:1b.0[A] -> > >> >> >> >>> GSI 22 (level, > >> >> >> >>> low) -> IRQ 22 > >> >> >> >>> [ 27.100052] PCI: Setting latency timer of device > >> >> >> >>> 0000:00:1b.0 to 64 > >> >> >> >>> > >> >> >> >>> > >> >> >> >>> ===== Advanced Linux Sound Architecture (ALSA) diagnostics > >> >> >> >>> ===== > >> >> >> >>> The ALSA packages provide audio support and also drivers > >> >> >> >>> for some > >> >> >> >>> modems. > >> >> >> >>> ALSA diagnostics are written during bootup to /proc/asound/ > >> >> >> >>> folders. > >> >> >> >>> > >> >> >> >>> The ALSA verion is 1.0.16 > >> >> >> >>> The modem cards detected by "aplay -l" are: > >> >> >> >>> card 0: Intel [HDA Intel], device 6: Si3054 Modem [Si3054 > >> >> >> >>> Modem] > >> >> >> >>> > >> >> >> >>> The /proc/asound/pcm file reports: > >> >> >> >>> ----------------------- > >> >> >> >>> 00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1 > >> >> >> >>> 00-04: ALC883 Analog : ALC883 Analog : capture 1 > >> >> >> >>> 00-00: ALC883 Analog : ALC883 Analog : playback 1 : capture > >> >> >> >>> 1 > >> >> >> >>> > >> >> >> >>> about /proc/asound/cards: > >> >> >> >>> ------------------------ > >> >> >> >>> 0 [Intel ]: HDA-Intel - HDA Intel > >> >> >> >>> HDA Intel at 0xfdef8000 irq 22 > >> >> >> >>> > >> >> >> >>> PCI slot 00:1b.0 has a High Definition Audio Card > >> >> >> >>> The drivers are in the kernel modules tree at: > >> >> >> >>> > >> >> >> >>> /lib/modules/2.6.24-16-generic/ubuntu/sound/alsa-driver/pci/hda/snd-hda-intel.ko > >> >> >> >>> /lib/modules/2.6.24-23-generic/ubuntu/sound/alsa-driver/pci/hda/snd-hda-intel.ko > >> >> >> >>> The modem codec file for the HDA card is: > >> >> >> >>> /proc/asound/card0/codec#1 > >> >> >> >>> -------------------------------------------------------- > >> >> >> >>> Codec: Motorola Si3054 > >> >> >> >>> Address: 1 > >> >> >> >>> Vendor Id: 0x10573055 > >> >> >> >>> Subsystem Id: 0x305557 > >> >> >> >>> Revision Id: 0x100900 > >> >> >> >>> Modem Function Group: 0x1 > >> >> >> >>> > >> >> >> >>> The audio card hosts a softmodem chip: 0x10573055 > >> >> >> >>> > >> >> >> >>> The softmodem chip 0x10573055 is in principle supported by > >> >> >> >>> the COMM > >> >> >> >>> support of slmodemd > >> >> >> >>> and the joint snd-hda-intel audio+modem driver, begun with > >> >> >> >>> ALSA version > >> >> >> >>> 1.0.13. > >> >> >> >>> For HDA cards with ALC883 chips, an upgrade to ALSA verions > >> >> >> >>> 1.0.15 way > >> >> >> >>> be necessary. Instructions for Upgrading snd-hda-intel and > >> >> >> >>> its dependent > >> >> >> >>> driver set are at: > >> >> >> >>> http://linmodems.technion.ac.il/bigarch/archive-eighth/msg00838.html > >> >> >> >>> > >> >> >> >>> If not a Conexant modem, the driver snd-hda-intel with its > >> >> >> >>> dependent > >> >> >> >>> drivers: > >> >> >> >>> snd_hda_intel 346136 3 > >> >> >> >>> snd_pcm 78596 2 snd_hda_intel,snd_pcm_oss > >> >> >> >>> snd_page_alloc 11400 2 snd_hda_intel,snd_pcm > >> >> >> >>> snd_hwdep 10500 1 snd_hda_intel > >> >> >> >>> snd 56996 17 > >> >> >> >>> snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_hwdep,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device > >> >> >> >>> ---------- > >> >> >> >>> provide audio + modem support with the modem chip residing > >> >> >> >>> on the > >> >> >> >>> subsystem. > >> >> >> >>> Any particular card can host any one of several soft modem > >> >> >> >>> chips. > >> >> >> >>> > >> >> >> >>> === Finished firmware and bootup diagnostics, next deducing > >> >> >> >>> cogent > >> >> >> >>> software. === > >> >> >> >>> > >> >> >> >>> Predictive diagnostics for card in bus 00:1b.0: > >> >> >> >>> Modem chipset detected on > >> >> >> >>> NAME="Audio device: Intel Corporation 82801I " > >> >> >> >>> CLASS=0403 > >> >> >> >>> PCIDEV=8086:293e > >> >> >> >>> SUBSYS=1462:63f5 > >> >> >> >>> IRQ=22 > >> >> >> >>> HDA=8086:293e > >> >> >> >>> SOFT=8086:293e.HDA > >> >> >> >>> CHIP=0x10573055 > >> >> >> >>> IDENT=slmodemd > >> >> >> >>> SLMODEMD_DEVICE=hw:0,6 > >> >> >> >>> Driver=snd-hda-intel > >> >> >> >>> > >> >> >> >>> For candidate modem in: 00:1b.0 > >> >> >> >>> 0403 Audio device: Intel Corporation 82801I > >> >> >> >>> Primary device ID: 8086:293e > >> >> >> >>> Subsystem PCI_id 1462:63f5 > >> >> >> >>> Softmodem codec or chipset from diagnostics: 0x10573055 > >> >> >> >>> from Archives: > >> >> >> >>> The HDA card softmodem chip is > >> >> >> >>> 0x10573055 > >> >> >> >>> > >> >> >> >>> > >> >> >> >>> Support type needed or chipset: slmodemd supporting the > >> >> >> >>> snd-hda-intel > >> >> >> >>> audio+modem driver > >> >> >> >>> > >> >> >> >>> An ALSA (Advanced Linux Sound Architecture) modem driver: > >> >> >> >>> snd-hda-intel > >> >> >> >>> provides Low Level support enabling contact with the modem > >> >> >> >>> hardware. > >> >> >> >>> For all BUT Conexant chip soft modems (using hsfmodem > >> >> >> >>> software) > >> >> >> >>> complementary High Level support is through a Smartlink > >> >> >> >>> utility: > >> >> >> >>> slmodemd > >> >> >> >>> > >> >> >> >>> Download from > >> >> >> >>> http://linmodems.technion.ac.il/packages/smartlink/ > >> >> >> >>> the package SLMODEMD.gcc4.2.tar.gz having a compiled > >> >> >> >>> slmodemd. Unpack > >> >> >> >>> under Linux with: > >> >> >> >>> $ tar zxf SLMODEMD.gcc4.2.tar.gz > >> >> >> >>> and read instructions therein. But briefly, the modem is > >> >> >> >>> setup with > >> >> >> >>> command: > >> >> >> >>> sudo slmodemd -c YOUR_COUNTRY --alsa hw:0,6 > >> >> >> >>> reporting dynamic creation of ports: > >> >> >> >>> /dev/ttySL0 --> /dev/pts/N , with N some number > >> >> >> >>> Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for > >> >> >> >>> follow > >> >> >> >>> through guidance. > >> >> >> >>> > >> >> >> >>> > >> >> >> >>> Writing DOCs/Intel.txt > >> >> >> >>> Writing DOCs/Smartlink.txt > >> >> >> >>> ============ end Smartlink section ===================== > >> >> >> >>> > >> >> >> >>> Completed candidate modem analyses. > >> >> >> >>> > >> >> >> >>> The base of the UDEV device file system is: /dev/.udev > >> >> >> >>> > >> >> >> >>> Versions adequately match for the compiler installed: > >> >> >> >>> 4.2.4 > >> >> >> >>> and the compiler used in kernel assembly: > >> >> >> >>> 4.2.4 > >> >> >> >>> > >> >> >> >>> The patch utility is needed and is needed for compiling > >> >> >> >>> ALSA drivers, > >> >> >> >>> and possibly others. > >> >> >> >>> > >> >> >> >>> > >> >> >> >>> Minimal compiling resources appear complete: > >> >> >> >>> make utility - /usr/bin/make > >> >> >> >>> Compiler version 4.2 > >> >> >> >>> linuc_headers base folder > >> >> >> >>> /lib/modules/2.6.24-23-generic/build > >> >> >> >>> > >> >> >> >>> However some compilations and executable functions may > >> >> >> >>> need additional > >> >> >> >>> files, > >> >> >> >>> in the FileNames.h (so called kernel "h"eaders) > >> >> >> >>> collection installed > >> >> >> >>> in /usr/include/ . > >> >> >> >>> For martian_modem, additional required packages are > >> >> >> >>> needed. The also > >> >> >> >>> required headers of package libc6 are commonly installed by > >> >> >> >>> default. > >> >> >> >>> Compiling hsfmodem drivers does require linux-libc-dev and > >> >> >> >>> libc6-dev > >> >> >> >>> packages, for kernels 2.6.24 and later versions. > >> >> >> >>> In not included on your install CD, search for them at > >> >> >> >>> http://packages.ubuntu.com > >> >> >> >>> or comparable Repository for other Linux distros. > >> >> >> >>> When compiling ALSA drivers, the utility "patch" > >> >> >> >>> will also be needed. > >> >> >> >>> > >> >> >> >>> > >> >> >> >>> > >> >> >> >>> > >> >> >> >>> If a driver compilation fails, with message including some > >> >> >> >>> lack of some > >> >> >> >>> FileName.h (stdio.h for example), then > >> >> >> >>> Some additional kernel-header files need installation to > >> >> >> >>> /usr/include. > >> >> >> >>> The minimal additional packages are libc6-dev > >> >> >> >>> and any of its dependents, under Ubuntu linux-libc-dev > >> >> >> >>> > >> >> >> >>> If an alternate ethernet connection is available, > >> >> >> >>> $ apt-get update > >> >> >> >>> $ apt-get -s install linux-kernel-devel > >> >> >> >>> will install needed packages. > >> >> >> >>> For Debian/Ubuntu related distributions, run the following > >> >> >> >>> command to > >> >> >> >>> display the needed package list: > >> >> >> >>> > >> >> >> >>> Otherwise packages have to be found through > >> >> >> >>> http://packages.ubuntu.com > >> >> >> >>> Once downloaded and transferred into a Linux partition, > >> >> >> >>> they can be installed alltogether with: > >> >> >> >>> $ sudo dpkg -i *.deb > >> >> >> >>> > >> >> >> >>> > >> >> >> >>> Checking pppd properties: > >> >> >> >>> -rwsr-xr-- 1 root dip 269256 2007-10-04 15:57 > >> >> >> >>> /usr/sbin/pppd > >> >> >> >>> > >> >> >> >>> In case of an "error 17" "serial > >> >> >> >>> loopback" problem, see: > >> >> >> >>> > >> >> >> >>> http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html > >> >> >> >>> > >> >> >> >>> To enable dialout without Root permission do: > >> >> >> >>> $ su - root (not for Ubuntu) > >> >> >> >>> sudo chmod a+x /usr/sbin/pppd > >> >> >> >>> or under Ubuntu related Linuxes > >> >> >> >>> sudo chmod a+x /usr/sbin/pppd > >> >> >> >>> > >> >> >> >>> Checking settings of: /etc/ppp/options > >> >> >> >>> asyncmap 0 > >> >> >> >>> noauth > >> >> >> >>> crtscts > >> >> >> >>> lock > >> >> >> >>> hide-password > >> >> >> >>> modem > >> >> >> >>> proxyarp > >> >> >> >>> lcp-echo-interval 30 > >> >> >> >>> lcp-echo-failure 4 > >> >> >> >>> noipx > >> >> >> >>> > >> >> >> >>> In case of a message like: > >> >> >> >>> Warning: Could not modify /etc/ppp/pap-secrets: > >> >> >> >>> Permission denied > >> >> >> >>> see > >> >> >> >>> http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html > >> >> >> >>> > >> >> >> >>> Read Modem/DOCs/YourSystem.txt concerning other COMM > >> >> >> >>> channels: eth1 > >> >> >> >>> Which can interfere with Browser naviagation. > >> >> >> >>> > >> >> >> >>> Don't worry about the following, it is for experts > >> >> >> >>> should trouble > >> >> >> >>> shooting be necessary. > >> >> >> >>> ========================================================== > >> >> >> >>> > >> >> >> >>> Checking for modem support lines: > >> >> >> >>> -------------------------------------- > >> >> >> >>> /device/modem symbolic link: > >> >> >> >>> slmodemd created symbolic link /dev/ttySL0: > >> >> >> >>> Within /etc/udev/ files: > >> >> >> >>> > >> >> >> >>> Within /etc/modprobe.conf files: > >> >> >> >>> /etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2 > >> >> >> >>> /etc/modprobe.d/alsa-base:options snd-via82xx-modem > >> >> >> >>> index=-2 > >> >> >> >>> /etc/modprobe.d/blacklist-modem:# Uncomment these entries > >> >> >> >>> in order to > >> >> >> >>> blacklist unwanted modem drivers > >> >> >> >>> /etc/modprobe.d/blacklist-modem:# blacklist > >> >> >> >>> snd-atiixp-modem > >> >> >> >>> /etc/modprobe.d/blacklist-modem:# blacklist > >> >> >> >>> snd-via82xx-modem > >> >> >> >>> Within any ancient /etc/devfs files: > >> >> >> >>> > >> >> >> >>> Within ancient kernel 2.4.n /etc/module.conf files: > >> >> >> >>> > >> >> >> >>> --------- end modem support lines -------- > >> >> >> >>> s embedded notebook modem to work. > >> >> >> >>> > >> >> >> >>> Only plain text email is forwarded by the > >> >> >> >>> Discuss@xxxxxxxxxxxxx List > >> >> >> >>> Server, > >> >> >> >>> as HTML can contain viruses. Use as the email Subject > >> >> >> >>> Line: > >> >> >> >>> YourName, YourCountry kernel 2.6.24-23-generic > >> >> >> >>> With this Subject Line cogent experts will be alerted, and > >> >> >> >>> useful case > >> >> >> >>> names left in the Archive. > >> >> >> >>> YourCountry will enable Country specific guidance. Linux > >> >> >> >>> experts in > >> >> >> >>> YourCountry > >> >> >> >>> can be found through: > >> >> >> >>> http://www.linux.org/groups/index.html. > >> >> >> >>> They will know your Country's modem code, which may be > >> >> >> >>> essential for > >> >> >> >>> dialup service. > >> >> >> >>> Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked > >> >> >> >>> by an > >> >> >> >>> Internet Provider mail filters. > >> >> >> >>> So in a day, also check the Archived responses at > >> >> >> >>> http://www.linmodems.org > >> >> >> >>> -------------------------- System information > >> >> >> >>> ---------------------------- > >> >> >> >>> CPU=i686, > >> >> >> >>> Linux version 2.6.24-23-generic (buildd@palmer) (gcc > >> >> >> >>> version 4.2.4 > >> >> >> >>> (Ubuntu 4.2.4-1ubuntu3)) #1 SMP Wed Apr 1 21:47:28 UTC 2009 > >> >> >> >>> scanModem update of: 2009_04_11 > >> >> >> >>> > >> >> >> >>> There are no blacklisted modem drivers in /etc/modprobe* > >> >> >> >>> files > >> >> >> >>> Potentially useful modem drivers now loaded are: > >> >> >> >>> snd_hda_intel > >> >> >> >>> > >> >> >> >>> Attached USB devices are: > >> >> >> >>> ID 0bda:0158 Realtek Semiconductor Corp. > >> >> >> >>> ID 5986:0203 Bison > >> >> >> >>> If a cellphone is not detected, see > >> >> >> >>> http://ubuntuforums.org/archive/index.php/t-878554.html > >> >> >> >>> > >> >> >> >>> If a USB modem or cellphone is attached and was not > >> >> >> >>> detected, please > >> >> >> >>> provide available information in your request to > >> >> >> >>> discuss@xxxxxxxxxxxxx > >> >> >> >>> > >> >> >> >>> For candidate card in slot 00:1b.0, firmware information > >> >> >> >>> and bootup > >> >> >> >>> diagnostics are: > >> >> >> >>> PCI slot PCI ID SubsystemID Name > >> >> >> >>> ---------- --------- --------- -------------- > >> >> >> >>> 00:1b.0 8086:293e 1462:63f5 Audio device: Intel > >> >> >> >>> Corporation 82801I > >> >> >> >>> > >> >> >> >>> Modem interrupt assignment and sharing: > >> >> >> >>> 22: 594 619 IO-APIC-fasteoi HDA Intel > >> >> >> >>> --- Bootup diagnostics for card in PCI slot 00:1b.0 ---- > >> >> >> >>> [ 27.100034] ACPI: PCI Interrupt 0000:00:1b.0[A] -> > >> >> >> >>> GSI 22 (level, > >> >> >> >>> low) -> IRQ 22 > >> >> >> >>> [ 27.100052] PCI: Setting latency timer of device > >> >> >> >>> 0000:00:1b.0 to 64 > >> >> >> >>> > >> >> >> >>> > >> >> >> >>> ===== Advanced Linux Sound Architecture (ALSA) diagnostics > >> >> >> >>> ===== > >> >> >> >>> The ALSA packages provide audio support and also drivers > >> >> >> >>> for some > >> >> >> >>> modems. > >> >> >> >>> ALSA diagnostics are written during bootup to /proc/asound/ > >> >> >> >>> folders. > >> >> >> >>> > >> >> >> >>> The ALSA verion is 1.0.16 > >> >> >> >>> The modem cards detected by "aplay -l" are: > >> >> >> >>> card 0: Intel [HDA Intel], device 6: Si3054 Modem [Si3054 > >> >> >> >>> Modem] > >> >> >> >>> > >> >> >> >>> The /proc/asound/pcm file reports: > >> >> >> >>> ----------------------- > >> >> >> >>> 00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1 > >> >> >> >>> 00-04: ALC883 Analog : ALC883 Analog : capture 1 > >> >> >> >>> 00-00: ALC883 Analog : ALC883 Analog : playback 1 : capture > >> >> >> >>> 1 > >> >> >> >>> > >> >> >> >>> about /proc/asound/cards: > >> >> >> >>> ------------------------ > >> >> >> >>> 0 [Intel ]: HDA-Intel - HDA Intel > >> >> >> >>> HDA Intel at 0xfdef8000 irq 22 > >> >> >> >>> > >> >> >> >>> PCI slot 00:1b.0 has a High Definition Audio Card > >> >> >> >>> The drivers are in the kernel modules tree at: > >> >> >> >>> > >> >> >> >>> /lib/modules/2.6.24-16-generic/ubuntu/sound/alsa-driver/pci/hda/snd-hda-intel.ko > >> >> >> >>> /lib/modules/2.6.24-23-generic/ubuntu/sound/alsa-driver/pci/hda/snd-hda-intel.ko > >> >> >> >>> The modem codec file for the HDA card is: > >> >> >> >>> /proc/asound/card0/codec#1 > >> >> >> >>> -------------------------------------------------------- > >> >> >> >>> Codec: Motorola Si3054 > >> >> >> >>> Address: 1 > >> >> >> >>> Vendor Id: 0x10573055 > >> >> >> >>> Subsystem Id: 0x305557 > >> >> >> >>> Revision Id: 0x100900 > >> >> >> >>> Modem Function Group: 0x1 > >> >> >> >>> > >> >> >> >>> The audio card hosts a softmodem chip: 0x10573055 > >> >> >> >>> > >> >> >> >>> The softmodem chip 0x10573055 is in principle supported by > >> >> >> >>> the COMM > >> >> >> >>> support of slmodemd > >> >> >> >>> and the joint snd-hda-intel audio+modem driver, begun with > >> >> >> >>> ALSA version > >> >> >> >>> 1.0.13. > >> >> >> >>> For HDA cards with ALC883 chips, an upgrade to ALSA verions > >> >> >> >>> 1.0.15 way > >> >> >> >>> be necessary. Instructions for Upgrading snd-hda-intel and > >> >> >> >>> its dependent > >> >> >> >>> driver set are at: > >> >> >> >>> http://linmodems.technion.ac.il/bigarch/archive-eighth/msg00838.html > >> >> >> >>> > >> >> >> >>> If not a Conexant modem, the driver snd-hda-intel with its > >> >> >> >>> dependent > >> >> >> >>> drivers: > >> >> >> >>> snd_hda_intel 346136 3 > >> >> >> >>> snd_pcm 78596 2 snd_hda_intel,snd_pcm_oss > >> >> >> >>> snd_page_alloc 11400 2 snd_hda_intel,snd_pcm > >> >> >> >>> snd_hwdep 10500 1 snd_hda_intel > >> >> >> >>> snd 56996 17 > >> >> >> >>> snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_hwdep,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device > >> >> >> >>> ---------- > >> >> >> >>> provide audio + modem support with the modem chip residing > >> >> >> >>> on the > >> >> >> >>> subsystem. > >> >> >> >>> Any particular card can host any one of several soft modem > >> >> >> >>> chips. > >> >> >> >>> > >> >> >> >>> === Finished firmware and bootup diagnostics, next deducing > >> >> >> >>> cogent > >> >> >> >>> software. === > >> >> >> >>> > >> >> >> >>> Predictive diagnostics for card in bus 00:1b.0: > >> >> >> >>> Modem chipset detected on > >> >> >> >>> NAME="Audio device: Intel Corporation 82801I " > >> >> >> >>> CLASS=0403 > >> >> >> >>> PCIDEV=8086:293e > >> >> >> >>> SUBSYS=1462:63f5 > >> >> >> >>> IRQ=22 > >> >> >> >>> HDA=8086:293e > >> >> >> >>> SOFT=8086:293e.HDA > >> >> >> >>> CHIP=0x10573055 > >> >> >> >>> IDENT=slmodemd > >> >> >> >>> SLMODEMD_DEVICE=hw:0,6 > >> >> >> >>> Driver=snd-hda-intel > >> >> >> >>> > >> >> >> >>> For candidate modem in: 00:1b.0 > >> >> >> >>> 0403 Audio device: Intel Corporation 82801I > >> >> >> >>> Primary device ID: 8086:293e > >> >> >> >>> Subsystem PCI_id 1462:63f5 > >> >> >> >>> Softmodem codec or chipset from diagnostics: 0x10573055 > >> >> >> >>> from Archives: > >> >> >> >>> The HDA card softmodem chip is > >> >> >> >>> 0x10573055 > >> >> >> >>> > >> >> >> >>> > >> >> >> >>> Support type needed or chipset: slmodemd supporting the > >> >> >> >>> snd-hda-intel > >> >> >> >>> audio+modem driver > >> >> >> >>> > >> >> >> >>> An ALSA (Advanced Linux Sound Architecture) modem driver: > >> >> >> >>> snd-hda-intel > >> >> >> >>> provides Low Level support enabling contact with the modem > >> >> >> >>> hardware. > >> >> >> >>> For all BUT Conexant chip soft modems (using hsfmodem > >> >> >> >>> software) > >> >> >> >>> complementary High Level support is through a Smartlink > >> >> >> >>> utility: > >> >> >> >>> slmodemd > >> >> >> >>> > >> >> >> >>> Download from > >> >> >> >>> http://linmodems.technion.ac.il/packages/smartlink/ > >> >> >> >>> the package SLMODEMD.gcc4.2.tar.gz having a compiled > >> >> >> >>> slmodemd. Unpack > >> >> >> >>> under Linux with: > >> >> >> >>> $ tar zxf SLMODEMD.gcc4.2.tar.gz > >> >> >> >>> and read instructions therein. But briefly, the modem is > >> >> >> >>> setup with > >> >> >> >>> command: > >> >> >> >>> sudo slmodemd -c YOUR_COUNTRY --alsa hw:0,6 > >> >> >> >>> reporting dynamic creation of ports: > >> >> >> >>> /dev/ttySL0 --> /dev/pts/N , with N some number > >> >> >> >>> Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for > >> >> >> >>> follow > >> >> >> >>> through guidance. > >> >> >> >>> > >> >> >> >>> > >> >> >> >>> Writing DOCs/Intel.txt > >> >> >> >>> Writing DOCs/Smartlink.txt > >> >> >> >>> ============ end Smartlink section ===================== > >> >> >> >>> > >> >> >> >>> Completed candidate modem analyses. > >> >> >> >>> > >> >> >> >>> The base of the UDEV device file system is: /dev/.udev > >> >> >> >>> > >> >> >> >>> Versions adequately match for the compiler installed: > >> >> >> >>> 4.2.4 > >> >> >> >>> and the compiler used in kernel assembly: > >> >> >> >>> 4.2.4 > >> >> >> >>> > >> >> >> >>> The patch utility is needed and is needed for compiling > >> >> >> >>> ALSA drivers, > >> >> >> >>> and possibly others. > >> >> >> >>> > >> >> >> >>> > >> >> >> >>> Minimal compiling resources appear complete: > >> >> >> >>> make utility - /usr/bin/make > >> >> >> >>> Compiler version 4.2 > >> >> >> >>> linuc_headers base folder > >> >> >> >>> /lib/modules/2.6.24-23-generic/build > >> >> >> >>> > >> >> >> >>> However some compilations and executable functions may > >> >> >> >>> need additional > >> >> >> >>> files, > >> >> >> >>> in the FileNames.h (so called kernel "h"eaders) > >> >> >> >>> collection installed > >> >> >> >>> in /usr/include/ . > >> >> >> >>> For martian_modem, additional required packages are > >> >> >> >>> needed. The also > >> >> >> >>> required headers of package libc6 are commonly installed by > >> >> >> >>> default. > >> >> >> >>> Compiling hsfmodem drivers does require linux-libc-dev and > >> >> >> >>> libc6-dev > >> >> >> >>> packages, for kernels 2.6.24 and later versions. > >> >> >> >>> In not included on your install CD, search for them at > >> >> >> >>> http://packages.ubuntu.com > >> >> >> >>> or comparable Repository for other Linux distros. > >> >> >> >>> When compiling ALSA drivers, the utility "patch" > >> >> >> >>> will also be needed. > >> >> >> >>> > >> >> >> >>> > >> >> >> >>> > >> >> >> >>> > >> >> >> >>> If a driver compilation fails, with message including some > >> >> >> >>> lack of some > >> >> >> >>> FileName.h (stdio.h for example), then > >> >> >> >>> Some additional kernel-header files need installation to > >> >> >> >>> /usr/include. > >> >> >> >>> The minimal additional packages are libc6-dev > >> >> >> >>> and any of its dependents, under Ubuntu linux-libc-dev > >> >> >> >>> > >> >> >> >>> If an alternate ethernet connection is available, > >> >> >> >>> $ apt-get update > >> >> >> >>> $ apt-get -s install linux-kernel-devel > >> >> >> >>> will install needed packages. > >> >> >> >>> For Debian/Ubuntu related distributions, run the following > >> >> >> >>> command to > >> >> >> >>> display the needed package list: > >> >> >> >>> > >> >> >> >>> Otherwise packages have to be found through > >> >> >> >>> http://packages.ubuntu.com > >> >> >> >>> Once downloaded and transferred into a Linux partition, > >> >> >> >>> they can be installed alltogether with: > >> >> >> >>> $ sudo dpkg -i *.deb > >> >> >> >>> > >> >> >> >>> > >> >> >> >>> Checking pppd properties: > >> >> >> >>> -rwsr-xr-- 1 root dip 269256 2007-10-04 15:57 > >> >> >> >>> /usr/sbin/pppd > >> >> >> >>> > >> >> >> >>> In case of an "error 17" "serial > >> >> >> >>> loopback" problem, see: > >> >> >> >>> > >> >> >> >>> http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html > >> >> >> >>> > >> >> >> >>> To enable dialout without Root permission do: > >> >> >> >>> $ su - root (not for Ubuntu) > >> >> >> >>> sudo chmod a+x /usr/sbin/pppd > >> >> >> >>> or under Ubuntu related Linuxes > >> >> >> >>> sudo chmod a+x /usr/sbin/pppd > >> >> >> >>> > >> >> >> >>> Checking settings of: /etc/ppp/options > >> >> >> >>> asyncmap 0 > >> >> >> >>> noauth > >> >> >> >>> crtscts > >> >> >> >>> lock > >> >> >> >>> hide-password > >> >> >> >>> modem > >> >> >> >>> proxyarp > >> >> >> >>> lcp-echo-interval 30 > >> >> >> >>> lcp-echo-failure 4 > >> >> >> >>> noipx > >> >> >> >>> > >> >> >> >>> In case of a message like: > >> >> >> >>> Warning: Could not modify /etc/ppp/pap-secrets: > >> >> >> >>> Permission denied > >> >> >> >>> see > >> >> >> >>> http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html > >> >> >> >>> > >> >> >> >>> Read Modem/DOCs/YourSystem.txt concerning other COMM > >> >> >> >>> channels: eth1 > >> >> >> >>> Which can interfere with Browser naviagation. > >> >> >> >>> > >> >> >> >>> Don't worry about the following, it is for experts > >> >> >> >>> should trouble > >> >> >> >>> shooting be necessary. > >> >> >> >>> ========================================================== > >> >> >> >>> > >> >> >> >>> Checking for modem support lines: > >> >> >> >>> -------------------------------------- > >> >> >> >>> /device/modem symbolic link: > >> >> >> >>> slmodemd created symbolic link /dev/ttySL0: > >> >> >> >>> Within /etc/udev/ files: > >> >> >> >>> > >> >> >> >>> Within /etc/modprobe.conf files: > >> >> >> >>> /etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2 > >> >> >> >>> /etc/modprobe.d/alsa-base:options snd-via82xx-modem > >> >> >> >>> index=-2 > >> >> >> >>> /etc/modprobe.d/blacklist-modem:# Uncomment these entries > >> >> >> >>> in order to > >> >> >> >>> blacklist unwanted modem drivers > >> >> >> >>> /etc/modprobe.d/blacklist-modem:# blacklist > >> >> >> >>> snd-atiixp-modem > >> >> >> >>> /etc/modprobe.d/blacklist-modem:# blacklist > >> >> >> >>> snd-via82xx-modem > >> >> >> >>> Within any ancient /etc/devfs files: > >> >> >> >>> > >> >> >> >>> Within ancient kernel 2.4.n /etc/module.conf files: > >> >> >> >>> > >> >> >> >>> --------- end modem support lines -------- > >> >> >> >>> Only plain text email is forwarded by the > >> >> >> >>> Discuss@xxxxxxxxxxxxx List > >> >> >> >>> Server, > >> >> >> >>> as HTML can contain viruses. Use as the email Subject > >> >> >> >>> Line: > >> >> >> >>> YourName, YourCountry kernel 2.6.24-23-generic > >> >> >> >>> With this Subject Line cogent experts will be alerted, and > >> >> >> >>> useful case > >> >> >> >>> names left in the Archive. > >> >> >> >>> YourCountry will enable Country specific guidance. Linux > >> >> >> >>> experts in > >> >> >> >>> YourCountry > >> >> >> >>> can be found through: > >> >> >> >>> http://www.linux.org/groups/index.html. > >> >> >> >>> They will know your Country's modem code, which may be > >> >> >> >>> essential for > >> >> >> >>> dialup service. > >> >> >> >>> Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked > >> >> >> >>> by an > >> >> >> >>> Internet Provider mail filters. > >> >> >> >>> So in a day, also check the Archived responses at > >> >> >> >>> http://www.linmodems.org > >> >> >> >>> -------------------------- System information > >> >> >> >>> ---------------------------- > >> >> >> >>> CPU=i686, > >> >> >> >>> Linux version 2.6.24-23-generic (buildd@palmer) (gcc > >> >> >> >>> version 4.2.4 > >> >> >> >>> (Ubuntu 4.2.4-1ubuntu3)) #1 SMP Wed Apr 1 21:47:28 UTC 2009 > >> >> >> >>> scanModem update of: 2009_04_11 > >> >> >> >>> > >> >> >> >>> There are no blacklisted modem drivers in /etc/modprobe* > >> >> >> >>> files > >> >> >> >>> Potentially useful modem drivers now loaded are: > >> >> >> >>> snd_hda_intel > >> >> >> >>> > >> >> >> >>> Attached USB devices are: > >> >> >> >>> ID 0bda:0158 Realtek Semiconductor Corp. > >> >> >> >>> ID 5986:0203 Bison > >> >> >> >>> If a cellphone is not detected, see > >> >> >> >>> http://ubuntuforums.org/archive/index.php/t-878554.html > >> >> >> >>> > >> >> >> >>> If a USB modem or cellphone is attached and was not > >> >> >> >>> detected, please > >> >> >> >>> provide available information in your request to > >> >> >> >>> discuss@xxxxxxxxxxxxx > >> >> >> >>> > >> >> >> >>> For candidate card in slot 00:1b.0, firmware information > >> >> >> >>> and bootup > >> >> >> >>> diagnostics are: > >> >> >> >>> PCI slot PCI ID SubsystemID Name > >> >> >> >>> ---------- --------- --------- -------------- > >> >> >> >>> 00:1b.0 8086:293e 1462:63f5 Audio device: Intel > >> >> >> >>> Corporation 82801I > >> >> >> >>> > >> >> >> >>> Modem interrupt assignment and sharing: > >> >> >> >>> 22: 594 619 IO-APIC-fasteoi HDA Intel > >> >> >> >>> --- Bootup diagnostics for card in PCI slot 00:1b.0 ---- > >> >> >> >>> [ 27.100034] ACPI: PCI Interrupt 0000:00:1b.0[A] -> > >> >> >> >>> GSI 22 (level, > >> >> >> >>> low) -> IRQ 22 > >> >> >> >>> [ 27.100052] PCI: Setting latency timer of device > >> >> >> >>> 0000:00:1b.0 to 64 > >> >> >> >>> > >> >> >> >>> > >> >> >> >>> ===== Advanced Linux Sound Architecture (ALSA) diagnostics > >> >> >> >>> ===== > >> >> >> >>> The ALSA packages provide audio support and also drivers > >> >> >> >>> for some > >> >> >> >>> modems. > >> >> >> >>> ALSA diagnostics are written during bootup to /proc/asound/ > >> >> >> >>> folders. > >> >> >> >>> > >> >> >> >>> The ALSA verion is 1.0.16 > >> >> >> >>> The modem cards detected by "aplay -l" are: > >> >> >> >>> card 0: Intel [HDA Intel], device 6: Si3054 Modem [Si3054 > >> >> >> >>> Modem] > >> >> >> >>> > >> >> >> >>> The /proc/asound/pcm file reports: > >> >> >> >>> ----------------------- > >> >> >> >>> 00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1 > >> >> >> >>> 00-04: ALC883 Analog : ALC883 Analog : capture 1 > >> >> >> >>> 00-00: ALC883 Analog : ALC883 Analog : playback 1 : capture > >> >> >> >>> 1 > >> >> >> >>> > >> >> >> >>> about /proc/asound/cards: > >> >> >> >>> ------------------------ > >> >> >> >>> 0 [Intel ]: HDA-Intel - HDA Intel > >> >> >> >>> HDA Intel at 0xfdef8000 irq 22 > >> >> >> >>> > >> >> >> >>> PCI slot 00:1b.0 has a High Definition Audio Card > >> >> >> >>> The drivers are in the kernel modules tree at: > >> >> >> >>> > >> >> >> >>> /lib/modules/2.6.24-16-generic/ubuntu/sound/alsa-driver/pci/hda/snd-hda-intel.ko > >> >> >> >>> /lib/modules/2.6.24-23-generic/ubuntu/sound/alsa-driver/pci/hda/snd-hda-intel.ko > >> >> >> >>> The modem codec file for the HDA card is: > >> >> >> >>> /proc/asound/card0/codec#1 > >> >> >> >>> -------------------------------------------------------- > >> >> >> >>> Codec: Motorola Si3054 > >> >> >> >>> Address: 1 > >> >> >> >>> Vendor Id: 0x10573055 > >> >> >> >>> Subsystem Id: 0x305557 > >> >> >> >>> Revision Id: 0x100900 > >> >> >> >>> Modem Function Group: 0x1 > >> >> >> >>> > >> >> >> >>> The audio card hosts a softmodem chip: 0x10573055 > >> >> >> >>> > >> >> >> >>> The softmodem chip 0x10573055 is in principle supported by > >> >> >> >>> the COMM > >> >> >> >>> support of slmodemd > >> >> >> >>> and the joint snd-hda-intel audio+modem driver, begun with > >> >> >> >>> ALSA version > >> >> >> >>> 1.0.13. > >> >> >> >>> For HDA cards with ALC883 chips, an upgrade to ALSA verions > >> >> >> >>> 1.0.15 way > >> >> >> >>> be necessary. Instructions for Upgrading snd-hda-intel and > >> >> >> >>> its dependent > >> >> >> >>> driver set are at: > >> >> >> >>> http://linmodems.technion.ac.il/bigarch/archive-eighth/msg00838.html > >> >> >> >>> > >> >> >> >>> If not a Conexant modem, the driver snd-hda-intel with its > >> >> >> >>> dependent > >> >> >> >>> drivers: > >> >> >> >>> snd_hda_intel 346136 3 > >> >> >> >>> snd_pcm 78596 2 snd_hda_intel,snd_pcm_oss > >> >> >> >>> snd_page_alloc 11400 2 snd_hda_intel,snd_pcm > >> >> >> >>> snd_hwdep 10500 1 snd_hda_intel > >> >> >> >>> snd 56996 17 > >> >> >> >>> snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_hwdep,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device > >> >> >> >>> ---------- > >> >> >> >>> provide audio + modem support with the modem chip residing > >> >> >> >>> on the > >> >> >> >>> subsystem. > >> >> >> >>> Any particular card can host any one of several soft modem > >> >> >> >>> chips. > >> >> >> >>> > >> >> >> >>> === Finished firmware and bootup diagnostics, next deducing > >> >> >> >>> cogent > >> >> >> >>> software. === > >> >> >> >>> > >> >> >> >>> Predictive diagnostics for card in bus 00:1b.0: > >> >> >> >>> Modem chipset detected on > >> >> >> >>> NAME="Audio device: Intel Corporation 82801I " > >> >> >> >>> CLASS=0403 > >> >> >> >>> PCIDEV=8086:293e > >> >> >> >>> SUBSYS=1462:63f5 > >> >> >> >>> IRQ=22 > >> >> >> >>> HDA=8086:293e > >> >> >> >>> SOFT=8086:293e.HDA > >> >> >> >>> CHIP=0x10573055 > >> >> >> >>> IDENT=slmodemd > >> >> >> >>> SLMODEMD_DEVICE=hw:0,6 > >> >> >> >>> Driver=snd-hda-intel > >> >> >> >>> > >> >> >> >>> For candidate modem in: 00:1b.0 > >> >> >> >>> 0403 Audio device: Intel Corporation 82801I > >> >> >> >>> Primary device ID: 8086:293e > >> >> >> >>> Subsystem PCI_id 1462:63f5 > >> >> >> >>> Softmodem codec or chipset from diagnostics: 0x10573055 > >> >> >> >>> from Archives: > >> >> >> >>> The HDA card softmodem chip is > >> >> >> >>> 0x10573055 > >> >> >> >>> > >> >> >> >>> > >> >> >> >>> Support type needed or chipset: slmodemd supporting the > >> >> >> >>> snd-hda-intel > >> >> >> >>> audio+modem driver > >> >> >> >>> > >> >> >> >>> An ALSA (Advanced Linux Sound Architecture) modem driver: > >> >> >> >>> snd-hda-intel > >> >> >> >>> provides Low Level support enabling contact with the modem > >> >> >> >>> hardware. > >> >> >> >>> For all BUT Conexant chip soft modems (using hsfmodem > >> >> >> >>> software) > >> >> >> >>> complementary High Level support is through a Smartlink > >> >> >> >>> utility: > >> >> >> >>> slmodemd > >> >> >> >>> > >> >> >> >>> Download from > >> >> >> >>> http://linmodems.technion.ac.il/packages/smartlink/ > >> >> >> >>> the package SLMODEMD.gcc4.2.tar.gz having a compiled > >> >> >> >>> slmodemd. Unpack > >> >> >> >>> under Linux with: > >> >> >> >>> $ tar zxf SLMODEMD.gcc4.2.tar.gz > >> >> >> >>> and read instructions therein. But briefly, the modem is > >> >> >> >>> setup with > >> >> >> >>> command: > >> >> >> >>> sudo slmodemd -c YOUR_COUNTRY --alsa hw:0,6 > >> >> >> >>> reporting dynamic creation of ports: > >> >> >> >>> /dev/ttySL0 --> /dev/pts/N , with N some number > >> >> >> >>> Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for > >> >> >> >>> follow > >> >> >> >>> through guidance. > >> >> >> >>> > >> >> >> >>> > >> >> >> >>> Writing DOCs/Intel.txt > >> >> >> >>> Writing DOCs/Smartlink.txt > >> >> >> >>> ============ end Smartlink section ===================== > >> >> >> >>> > >> >> >> >>> Completed candidate modem analyses. > >> >> >> >>> > >> >> >> >>> The base of the UDEV device file system is: /dev/.udev > >> >> >> >>> > >> >> >> >>> Versions adequately match for the compiler installed: > >> >> >> >>> 4.2.4 > >> >> >> >>> and the compiler used in kernel assembly: > >> >> >> >>> 4.2.4 > >> >> >> >>> > >> >> >> >>> The patch utility is needed and is needed for compiling > >> >> >> >>> ALSA drivers, > >> >> >> >>> and possibly others. > >> >> >> >>> > >> >> >> >>> > >> >> >> >>> Minimal compiling resources appear complete: > >> >> >> >>> make utility - /usr/bin/make > >> >> >> >>> Compiler version 4.2 > >> >> >> >>> linuc_headers base folder > >> >> >> >>> /lib/modules/2.6.24-23-generic/build > >> >> >> >>> > >> >> >> >>> However some compilations and executable functions may > >> >> >> >>> need additional > >> >> >> >>> files, > >> >> >> >>> in the FileNames.h (so called kernel "h"eaders) > >> >> >> >>> collection installed > >> >> >> >>> in /usr/include/ . > >> >> >> >>> For martian_modem, additional required packages are > >> >> >> >>> needed. The also > >> >> >> >>> required headers of package libc6 are commonly installed by > >> >> >> >>> default. > >> >> >> >>> Compiling hsfmodem drivers does require linux-libc-dev and > >> >> >> >>> libc6-dev > >> >> >> >>> packages, for kernels 2.6.24 and later versions. > >> >> >> >>> In not included on your install CD, search for them at > >> >> >> >>> http://packages.ubuntu.com > >> >> >> >>> or comparable Repository for other Linux distros. > >> >> >> >>> When compiling ALSA drivers, the utility "patch" > >> >> >> >>> will also be needed. > >> >> >> >>> > >> >> >> >>> > >> >> >> >>> > >> >> >> >>> > >> >> >> >>> If a driver compilation fails, with message including some > >> >> >> >>> lack of some > >> >> >> >>> FileName.h (stdio.h for example), then > >> >> >> >>> Some additional kernel-header files need installation to > >> >> >> >>> /usr/include. > >> >> >> >>> The minimal additional packages are libc6-dev > >> >> >> >>> and any of its dependents, under Ubuntu linux-libc-dev > >> >> >> >>> > >> >> >> >>> If an alternate ethernet connection is available, > >> >> >> >>> $ apt-get update > >> >> >> >>> $ apt-get -s install linux-kernel-devel > >> >> >> >>> will install needed packages. > >> >> >> >>> For Debian/Ubuntu related distributions, run the following > >> >> >> >>> command to > >> >> >> >>> display the needed package list: > >> >> >> >>> > >> >> >> >>> Otherwise packages have to be found through > >> >> >> >>> http://packages.ubuntu.com > >> >> >> >>> Once downloaded and transferred into a Linux partition, > >> >> >> >>> they can be installed alltogether with: > >> >> >> >>> $ sudo dpkg -i *.deb > >> >> >> >>> > >> >> >> >>> > >> >> >> >>> Checking pppd properties: > >> >> >> >>> -rwsr-xr-- 1 root dip 269256 2007-10-04 15:57 > >> >> >> >>> /usr/sbin/pppd > >> >> >> >>> > >> >> >> >>> In case of an "error 17" "serial > >> >> >> >>> loopback" problem, see: > >> >> >> >>> > >> >> >> >>> http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html > >> >> >> >>> > >> >> >> >>> To enable dialout without Root permission do: > >> >> >> >>> $ su - root (not for Ubuntu) > >> >> >> >>> sudo chmod a+x /usr/sbin/pppd > >> >> >> >>> or under Ubuntu related Linuxes > >> >> >> >>> sudo chmod a+x /usr/sbin/pppd > >> >> >> >>> > >> >> >> >>> Checking settings of: /etc/ppp/options > >> >> >> >>> asyncmap 0 > >> >> >> >>> noauth > >> >> >> >>> crtscts > >> >> >> >>> lock > >> >> >> >>> hide-password > >> >> >> >>> modem > >> >> >> >>> proxyarp > >> >> >> >>> lcp-echo-interval 30 > >> >> >> >>> lcp-echo-failure 4 > >> >> >> >>> noipx > >> >> >> >>> > >> >> >> >>> In case of a message like: > >> >> >> >>> Warning: Could not modify /etc/ppp/pap-secrets: > >> >> >> >>> Permission denied > >> >> >> >>> see > >> >> >> >>> http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html > >> >> >> >>> > >> >> >> >>> Read Modem/DOCs/YourSystem.txt concerning other COMM > >> >> >> >>> channels: eth1 > >> >> >> >>> Which can interfere with Browser naviagation. > >> >> >> >>> > >> >> >> >>> Don't worry about the following, it is for experts > >> >> >> >>> should trouble > >> >> >> >>> shooting be necessary. > >> >> >> >>> ========================================================== > >> >> >> >>> > >> >> >> >>> Checking for modem support lines: > >> >> >> >>> -------------------------------------- > >> >> >> >>> /device/modem symbolic link: > >> >> >> >>> slmodemd created symbolic link /dev/ttySL0: > >> >> >> >>> Within /etc/udev/ files: > >> >> >> >>> > >> >> >> >>> Within /etc/modprobe.conf files: > >> >> >> >>> /etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2 > >> >> >> >>> /etc/modprobe.d/alsa-base:options snd-via82xx-modem > >> >> >> >>> index=-2 > >> >> >> >>> /etc/modprobe.d/blacklist-modem:# Uncomment these entries > >> >> >> >>> in order to > >> >> >> >>> blacklist unwanted modem drivers > >> >> >> >>> /etc/modprobe.d/blacklist-modem:# blacklist > >> >> >> >>> snd-atiixp-modem > >> >> >> >>> /etc/modprobe.d/blacklist-modem:# blacklist > >> >> >> >>> snd-via82xx-modem > >> >> >> >>> Within any ancient /etc/devfs files: > >> >> >> >>> > >> >> >> >>> Within ancient kernel 2.4.n /etc/module.conf files: > >> >> >> >>> > >> >> >> >>> --------- end modem support lines -------- > >> >> >> >>> in notebook > >> >> >> >>> > >> >> >> >>> Only plain text email is forwarded by the > >> >> >> >>> Discuss@xxxxxxxxxxxxx List > >> >> >> >>> Server, > >> >> >> >>> as HTML can contain viruses. Use as the email Subject > >> >> >> >>> Line: > >> >> >> >>> YourName, YourCountry kernel 2.6.24-23-generic > >> >> >> >>> With this Subject Line cogent experts will be alerted, and > >> >> >> >>> useful case > >> >> >> >>> names left in the Archive. > >> >> >> >>> YourCountry will enable Country specific guidance. Linux > >> >> >> >>> experts in > >> >> >> >>> YourCountry > >> >> >> >>> can be found through: > >> >> >> >>> http://www.linux.org/groups/index.html. > >> >> >> >>> They will know your Country's modem code, which may be > >> >> >> >>> essential for > >> >> >> >>> dialup service. > >> >> >> >>> Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked > >> >> >> >>> by an > >> >> >> >>> Internet Provider mail filters. > >> >> >> >>> So in a day, also check the Archived responses at > >> >> >> >>> http://www.linmodems.org > >> >> >> >>> -------------------------- System information > >> >> >> >>> ---------------------------- > >> >> >> >>> CPU=i686, > >> >> >> >>> Linux version 2.6.24-23-generic (buildd@palmer) (gcc > >> >> >> >>> version 4.2.4 > >> >> >> >>> (Ubuntu 4.2.4-1ubuntu3)) #1 SMP Wed Apr 1 21:47:28 UTC 2009 > >> >> >> >>> scanModem update of: 2009_04_11 > >> >> >> >>> > >> >> >> >>> There are no blacklisted modem drivers in /etc/modprobe* > >> >> >> >>> files > >> >> >> >>> Potentially useful modem drivers now loaded are: > >> >> >> >>> snd_hda_intel > >> >> >> >>> > >> >> >> >>> Attached USB devices are: > >> >> >> >>> ID 0bda:0158 Realtek Semiconductor Corp. > >> >> >> >>> ID 5986:0203 Bison > >> >> >> >>> If a cellphone is not detected, see > >> >> >> >>> http://ubuntuforums.org/archive/index.php/t-878554.html > >> >> >> >>> > >> >> >> >>> If a USB modem or cellphone is attached and was not > >> >> >> >>> detected, please > >> >> >> >>> provide available information in your request to > >> >> >> >>> discuss@xxxxxxxxxxxxx > >> >> >> >>> > >> >> >> >>> For candidate card in slot 00:1b.0, firmware information > >> >> >> >>> and bootup > >> >> >> >>> diagnostics are: > >> >> >> >>> PCI slot PCI ID SubsystemID Name > >> >> >> >>> ---------- --------- --------- -------------- > >> >> >> >>> 00:1b.0 8086:293e 1462:63f5 Audio device: Intel > >> >> >> >>> Corporation 82801I > >> >> >> >>> > >> >> >> >>> Modem interrupt assignment and sharing: > >> >> >> >>> 22: 594 619 IO-APIC-fasteoi HDA Intel > >> >> >> >>> --- Bootup diagnostics for card in PCI slot 00:1b.0 ---- > >> >> >> >>> [ 27.100034] ACPI: PCI Interrupt 0000:00:1b.0[A] -> > >> >> >> >>> GSI 22 (level, > >> >> >> >>> low) -> IRQ 22 > >> >> >> >>> [ 27.100052] PCI: Setting latency timer of device > >> >> >> >>> 0000:00:1b.0 to 64 > >> >> >> >>> > >> >> >> >>> > >> >> >> >>> ===== Advanced Linux Sound Architecture (ALSA) diagnostics > >> >> >> >>> ===== > >> >> >> >>> The ALSA packages provide audio support and also drivers > >> >> >> >>> for some > >> >> >> >>> modems. > >> >> >> >>> ALSA diagnostics are written during bootup to /proc/asound/ > >> >> >> >>> folders. > >> >> >> >>> > >> >> >> >>> The ALSA verion is 1.0.16 > >> >> >> >>> The modem cards detected by "aplay -l" are: > >> >> >> >>> card 0: Intel [HDA Intel], device 6: Si3054 Modem [Si3054 > >> >> >> >>> Modem] > >> >> >> >>> > >> >> >> >>> The /proc/asound/pcm file reports: > >> >> >> >>> ----------------------- > >> >> >> >>> 00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1 > >> >> >> >>> 00-04: ALC883 Analog : ALC883 Analog : capture 1 > >> >> >> >>> 00-00: ALC883 Analog : ALC883 Analog : playback 1 : capture > >> >> >> >>> 1 > >> >> >> >>> > >> >> >> >>> about /proc/asound/cards: > >> >> >> >>> ------------------------ > >> >> >> >>> 0 [Intel ]: HDA-Intel - HDA Intel > >> >> >> >>> HDA Intel at 0xfdef8000 irq 22 > >> >> >> >>> > >> >> >> >>> PCI slot 00:1b.0 has a High Definition Audio Card > >> >> >> >>> The drivers are in the kernel modules tree at: > >> >> >> >>> > >> >> >> >>> /lib/modules/2.6.24-16-generic/ubuntu/sound/alsa-driver/pci/hda/snd-hda-intel.ko > >> >> >> >>> /lib/modules/2.6.24-23-generic/ubuntu/sound/alsa-driver/pci/hda/snd-hda-intel.ko > >> >> >> >>> The modem codec file for the HDA card is: > >> >> >> >>> /proc/asound/card0/codec#1 > >> >> >> >>> -------------------------------------------------------- > >> >> >> >>> Codec: Motorola Si3054 > >> >> >> >>> Address: 1 > >> >> >> >>> Vendor Id: 0x10573055 > >> >> >> >>> Subsystem Id: 0x305557 > >> >> >> >>> Revision Id: 0x100900 > >> >> >> >>> Modem Function Group: 0x1 > >> >> >> >>> > >> >> >> >>> The audio card hosts a softmodem chip: 0x10573055 > >> >> >> >>> > >> >> >> >>> The softmodem chip 0x10573055 is in principle supported by > >> >> >> >>> the COMM > >> >> >> >>> support of slmodemd > >> >> >> >>> and the joint snd-hda-intel audio+modem driver, begun with > >> >> >> >>> ALSA version > >> >> >> >>> 1.0.13. > >> >> >> >>> For HDA cards with ALC883 chips, an upgrade to ALSA verions > >> >> >> >>> 1.0.15 way > >> >> >> >>> be necessary. Instructions for Upgrading snd-hda-intel and > >> >> >> >>> its dependent > >> >> >> >>> driver set are at: > >> >> >> >>> http://linmodems.technion.ac.il/bigarch/archive-eighth/msg00838.html > >> >> >> >>> > >> >> >> >>> If not a Conexant modem, the driver snd-hda-intel with its > >> >> >> >>> dependent > >> >> >> >>> drivers: > >> >> >> >>> snd_hda_intel 346136 3 > >> >> >> >>> snd_pcm 78596 2 snd_hda_intel,snd_pcm_oss > >> >> >> >>> snd_page_alloc 11400 2 snd_hda_intel,snd_pcm > >> >> >> >>> snd_hwdep 10500 1 snd_hda_intel > >> >> >> >>> snd 56996 17 > >> >> >> >>> snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_hwdep,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device > >> >> >> >>> ---------- > >> >> >> >>> provide audio + modem support with the modem chip residing > >> >> >> >>> on the > >> >> >> >>> subsystem. > >> >> >> >>> Any particular card can host any one of several soft modem > >> >> >> >>> chips. > >> >> >> >>> > >> >> >> >>> === Finished firmware and bootup diagnostics, next deducing > >> >> >> >>> cogent > >> >> >> >>> software. === > >> >> >> >>> > >> >> >> >>> Predictive diagnostics for card in bus 00:1b.0: > >> >> >> >>> Modem chipset detected on > >> >> >> >>> NAME="Audio device: Intel Corporation 82801I " > >> >> >> >>> CLASS=0403 > >> >> >> >>> PCIDEV=8086:293e > >> >> >> >>> SUBSYS=1462:63f5 > >> >> >> >>> IRQ=22 > >> >> >> >>> HDA=8086:293e > >> >> >> >>> SOFT=8086:293e.HDA > >> >> >> >>> CHIP=0x10573055 > >> >> >> >>> IDENT=slmodemd > >> >> >> >>> SLMODEMD_DEVICE=hw:0,6 > >> >> >> >>> Driver=snd-hda-intel > >> >> >> >>> > >> >> >> >>> For candidate modem in: 00:1b.0 > >> >> >> >>> 0403 Audio device: Intel Corporation 82801I > >> >> >> >>> Primary device ID: 8086:293e > >> >> >> >>> Subsystem PCI_id 1462:63f5 > >> >> >> >>> Softmodem codec or chipset from diagnostics: 0x10573055 > >> >> >> >>> from Archives: > >> >> >> >>> The HDA card softmodem chip is > >> >> >> >>> 0x10573055 > >> >> >> >>> > >> >> >> >>> > >> >> >> >>> Support type needed or chipset: slmodemd supporting the > >> >> >> >>> snd-hda-intel > >> >> >> >>> audio+modem driver > >> >> >> >>> > >> >> >> >>> An ALSA (Advanced Linux Sound Architecture) modem driver: > >> >> >> >>> snd-hda-intel > >> >> >> >>> provides Low Level support enabling contact with the modem > >> >> >> >>> hardware. > >> >> >> >>> For all BUT Conexant chip soft modems (using hsfmodem > >> >> >> >>> software) > >> >> >> >>> complementary High Level support is through a Smartlink > >> >> >> >>> utility: > >> >> >> >>> slmodemd > >> >> >> >>> > >> >> >> >>> Download from > >> >> >> >>> http://linmodems.technion.ac.il/packages/smartlink/ > >> >> >> >>> the package SLMODEMD.gcc4.2.tar.gz having a compiled > >> >> >> >>> slmodemd. Unpack > >> >> >> >>> under Linux with: > >> >> >> >>> $ tar zxf SLMODEMD.gcc4.2.tar.gz > >> >> >> >>> and read instructions therein. But briefly, the modem is > >> >> >> >>> setup with > >> >> >> >>> command: > >> >> >> >>> sudo slmodemd -c YOUR_COUNTRY --alsa hw:0,6 > >> >> >> >>> reporting dynamic creation of ports: > >> >> >> >>> /dev/ttySL0 --> /dev/pts/N , with N some number > >> >> >> >>> Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for > >> >> >> >>> follow > >> >> >> >>> through guidance. > >> >> >> >>> > >> >> >> >>> > >> >> >> >>> Writing DOCs/Intel.txt > >> >> >> >>> Writing DOCs/Smartlink.txt > >> >> >> >>> ============ end Smartlink section ===================== > >> >> >> >>> > >> >> >> >>> Completed candidate modem analyses. > >> >> >> >>> > >> >> >> >>> The base of the UDEV device file system is: /dev/.udev > >> >> >> >>> > >> >> >> >>> Versions adequately match for the compiler installed: > >> >> >> >>> 4.2.4 > >> >> >> >>> and the compiler used in kernel assembly: > >> >> >> >>> 4.2.4 > >> >> >> >>> > >> >> >> >>> The patch utility is needed and is needed for compiling > >> >> >> >>> ALSA drivers, > >> >> >> >>> and possibly others. > >> >> >> >>> > >> >> >> >>> > >> >> >> >>> Minimal compiling resources appear complete: > >> >> >> >>> make utility - /usr/bin/make > >> >> >> >>> Compiler version 4.2 > >> >> >> >>> linuc_headers base folder > >> >> >> >>> /lib/modules/2.6.24-23-generic/build > >> >> >> >>> > >> >> >> >>> However some compilations and executable functions may > >> >> >> >>> need additional > >> >> >> >>> files, > >> >> >> >>> in the FileNames.h (so called kernel "h"eaders) > >> >> >> >>> collection installed > >> >> >> >>> in /usr/include/ . > >> >> >> >>> For martian_modem, additional required packages are > >> >> >> >>> needed. The also > >> >> >> >>> required headers of package libc6 are commonly installed by > >> >> >> >>> default. > >> >> >> >>> Compiling hsfmodem drivers does require linux-libc-dev and > >> >> >> >>> libc6-dev > >> >> >> >>> packages, for kernels 2.6.24 and later versions. > >> >> >> >>> In not included on your install CD, search for them at > >> >> >> >>> http://packages.ubuntu.com > >> >> >> >>> or comparable Repository for other Linux distros. > >> >> >> >>> When compiling ALSA drivers, the utility "patch" > >> >> >> >>> will also be needed. > >> >> >> >>> > >> >> >> >>> > >> >> >> >>> > >> >> >> >>> > >> >> >> >>> If a driver compilation fails, with message including some > >> >> >> >>> lack of some > >> >> >> >>> FileName.h (stdio.h for example), then > >> >> >> >>> Some additional kernel-header files need installation to > >> >> >> >>> /usr/include. > >> >> >> >>> The minimal additional packages are libc6-dev > >> >> >> >>> and any of its dependents, under Ubuntu linux-libc-dev > >> >> >> >>> > >> >> >> >>> If an alternate ethernet connection is available, > >> >> >> >>> $ apt-get update > >> >> >> >>> $ apt-get -s install linux-kernel-devel > >> >> >> >>> will install needed packages. > >> >> >> >>> For Debian/Ubuntu related distributions, run the following > >> >> >> >>> command to > >> >> >> >>> display the needed package list: > >> >> >> >>> > >> >> >> >>> Otherwise packages have to be found through > >> >> >> >>> http://packages.ubuntu.com > >> >> >> >>> Once downloaded and transferred into a Linux partition, > >> >> >> >>> they can be installed alltogether with: > >> >> >> >>> $ sudo dpkg -i *.deb > >> >> >> >>> > >> >> >> >>> > >> >> >> >>> Checking pppd properties: > >> >> >> >>> -rwsr-xr-- 1 root dip 269256 2007-10-04 15:57 > >> >> >> >>> /usr/sbin/pppd > >> >> >> >>> > >> >> >> >>> In case of an "error 17" "serial > >> >> >> >>> loopback" problem, see: > >> >> >> >>> > >> >> >> >>> http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html > >> >> >> >>> > >> >> >> >>> To enable dialout without Root permission do: > >> >> >> >>> $ su - root (not for Ubuntu) > >> >> >> >>> sudo chmod a+x /usr/sbin/pppd > >> >> >> >>> or under Ubuntu related Linuxes > >> >> >> >>> sudo chmod a+x /usr/sbin/pppd > >> >> >> >>> > >> >> >> >>> Checking settings of: /etc/ppp/options > >> >> >> >>> asyncmap 0 > >> >> >> >>> noauth > >> >> >> >>> crtscts > >> >> >> >>> lock > >> >> >> >>> hide-password > >> >> >> >>> modem > >> >> >> >>> proxyarp > >> >> >> >>> lcp-echo-interval 30 > >> >> >> >>> lcp-echo-failure 4 > >> >> >> >>> noipx > >> >> >> >>> > >> >> >> >>> In case of a message like: > >> >> >> >>> Warning: Could not modify /etc/ppp/pap-secrets: > >> >> >> >>> Permission denied > >> >> >> >>> see > >> >> >> >>> http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html > >> >> >> >>> > >> >> >> >>> Read Modem/DOCs/YourSystem.txt concerning other COMM > >> >> >> >>> channels: eth1 > >> >> >> >>> Which can interfere with Browser naviagation. > >> >> >> >>> > >> >> >> >>> Don't worry about the following, it is for experts > >> >> >> >>> should trouble > >> >> >> >>> shooting be necessary. > >> >> >> >>> ========================================================== > >> >> >> >>> > >> >> >> >>> Checking for modem support lines: > >> >> >> >>> -------------------------------------- > >> >> >> >>> /device/modem symbolic link: > >> >> >> >>> slmodemd created symbolic link /dev/ttySL0: > >> >> >> >>> Within /etc/udev/ files: > >> >> >> >>> > >> >> >> >>> Within /etc/modprobe.conf files: > >> >> >> >>> /etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2 > >> >> >> >>> /etc/modprobe.d/alsa-base:options snd-via82xx-modem > >> >> >> >>> index=-2 > >> >> >> >>> /etc/modprobe.d/blacklist-modem:# Uncomment these entries > >> >> >> >>> in order to > >> >> >> >>> blacklist unwanted modem drivers > >> >> >> >>> /etc/modprobe.d/blacklist-modem:# blacklist > >> >> >> >>> snd-atiixp-modem > >> >> >> >>> /etc/modprobe.d/blacklist-modem:# blacklist > >> >> >> >>> snd-via82xx-modem > >> >> >> >>> Within any ancient /etc/devfs files: > >> >> >> >>> > >> >> >> >>> Within ancient kernel 2.4.n /etc/module.conf files: > >> >> >> >>> > >> >> >> >>> --------- end modem support lines -------- > >> >> >> >> > >> >> >> >> > >> >> >> >> > >> >> >> >> > >> >> >> > > >> >> > > >> >> > > >> > > >> > > > > >
