Thanks Marvin, I very much appreciate your effort in updating the tar ball. Now the drivers are compiled and installed. However I've hit another issue. I followed the instructions through to the first test using wvdialconf. That was it, it couldn't find my modem. I tried adding the "PCI=noacpi" into the grub file. The result was the system hung while booting up and I had to use recovery mode. I then changed the PCI slot the modem was in. This was unsuccessful also. Any ideas would be much appreciated. Thanks again Dave On Sat, 2009-04-18 at 21:39 -0400, Marvin Stodolsky wrote: > Dave, > > Per the attachment, I've done the fix and will send you the tarball separately > > MarvS > > On Sat, Apr 18, 2009 at 10:23 AM, Marvin Stodolsky > <marvin.stodolsky@xxxxxxxxx> wrote: > > Dave, > > > > The ‘struct uart_info’ error has been encoiubtered i other code > > packages. The fix is to make a change like > > > > struct tty_struct *tty =p->port.info->port.tty; > > from an original like: > > struct tty_struct *tty =p->port.info->tty; > > > > But I'm not under linux now and cannot check in detail. > > Maybe this PM. But you can search out the lines like above and test yourself. > > > > MarvS > > > > On Fri, Apr 17, 2009 at 4:25 PM, Dave and Marleen Rentoul > > <rentoul@xxxxxxxxxxx> wrote: > >> Hi, can any one that has installed the drivers for a:- > >> > >> NAME="Communication controller: Agere Systems V.92 56K WinModem " > >> CLASS=0780 > >> PCIDEV=11c1:048c > >> SUBSYS=11c1:044c > >> IDENT=agrsm > >> > >> please tell me what I need to do to so that the "make" instruction > >> compiles the code without error > >> > >> "/home/username/Desktop/agrsm/serial26.c:1007: error: ‘struct uart_info’ > >> has no member named ‘tty’" > >> > >> Thanks > >> > >> Dave > >> > >> > >> Quote from terminal window follows:- > >> > >> username@Elmo:~/Desktop/agrsm$ make > >> make -C /lib/modules/2.6.27-7-generic/build > >> SUBDIRS=/home/username/Desktop/agrsm modules > >> make[1]: Entering directory `/usr/src/linux-headers-2.6.27-7-generic' > >> CC [M] /home/username/Desktop/agrsm/serial26.o > >> /home/username/Desktop/agrsm/serial26.c: In function ‘receive_chars’: > >> /home/username/Desktop/agrsm/serial26.c:1007: error: ‘struct uart_info’ > >> has no member named ‘tty’ > >> /home/username/Desktop/agrsm/serial26.c: In function > >> ‘serial8250_get_mctrl’: > >> /home/username/Desktop/agrsm/serial26.c:1371: warning: unused variable > >> ‘flags’ > >> /home/username/Desktop/agrsm/serial26.c: In function > >> ‘serial8250_config_port’: > >> /home/username/Desktop/agrsm/serial26.c:2039: warning: unused variable > >> ‘ret’ > >> /home/username/Desktop/agrsm/serial26.c: At top level: > >> /home/username/Desktop/agrsm/serial26.c:2131: warning: initialization > >> from incompatible pointer type > >> /home/username/Desktop/agrsm/serial26.c:2132: warning: initialization > >> from incompatible pointer type > >> make[2]: *** [/home/username/Desktop/agrsm/serial26.o] Error 1 > >> make[1]: *** [_module_/home/username/Desktop/agrsm] Error 2 > >> make[1]: Leaving directory `/usr/src/linux-headers-2.6.27-7-generic' > >> make: *** [modules] Error 2 > >> > >> > >> > >
