Thaulat First complete compiling suuport by installing packages for libc6-dev, linux-headers-2.6.27-7 and linux-headers-2.6.27-7-server. Then from http://linmodems.technion.ac.il/packages/ltmodem/kernel-2.6/martian/ get the martian-full-20080625.tar.gz for service of DSP modem Communication controller: Agere Systems 56k WinModem " CLASS=0780 PCIDEV=11c1:0440 Note that the software doesnot support service of multiple winmodems on one PC. For multiple installations, the mode expensive Controller Chipset family of modems is required. MarvS scanModem maintainer On Mon, Apr 13, 2009 at 6:47 AM, Thaulat Rahman <thaulat@xxxxxxxxxxxxxxxx> wrote: > Dear all, > > Im running ubuntu 8.10 server, & i can't seem to get the Agere Modem driver > installed. Pls help. attached are the scanmodem output. > -- > > Regards, > > Thaulat Rahman Bin Habibullah Khan > Perwira Setia Technologies Sdn. Bhd. > NO. 6-2, Jalan Puteri 5/1, Bandar Puteri, > 47100 Puchong Selangor Darul Ehsan, > H/P : 019-4722786 > Tel : 03-80632801 ; Fax : 03-80632802 > Email : thaulat@xxxxxxxxxxxxxxxx <mailto:thaulat@xxxxxxxxxxxxxxxx> > Web : tech.perwirasetia.com <http://tech.perwirasetia.com> > > > Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List > Server, > as HTML can contain viruses. Use as the email Subject Line: > YourName, YourCountry kernel 2.6.27-7-server > With this Subject Line cogent experts will be alerted, and useful case > names left in the Archive. > YourCountry will enable Country specific guidance. Linux experts in > YourCountry > can be found through: http://www.linux.org/groups/index.html. > They will know your Country's modem code, which may be essential for dialup > service. > Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet > Provider mail filters. > So in a day, also check the Archived responses at http://www.linmodems.org > -------------------------- System information ---------------------------- > CPU=i686, > Linux version 2.6.27-7-server (buildd@rothera) (gcc version 4.3.2 (Ubuntu > 4.3.2-1ubuntu10) ) #1 SMP Fri Oct 24 07:37:55 UTC 2008 > scanModem update of: 2009_04_04 > The modem symbolic link is /dev/modem -> /dev/ttyLTM0 > There are no blacklisted modem drivers in /etc/modprobe* files > Potentially useful modem drivers now loaded are: > snd_hda_intel martian_dev > > If a USB modem or cellphone is attached and was not detected, please > provide available information in your request to discuss@xxxxxxxxxxxxx > > For candidate card in slot 05:03.0, firmware information and bootup > diagnostics are: > PCI slot PCI ID SubsystemID Name > ---------- --------- --------- -------------- > 05:03.0 11c1:0440 11c1:0440 Communication controller: > Agere Systems 56k WinModem > > Modem interrupt assignment and sharing: > 22: 261 258 IO-APIC-fasteoi HDA Intel, 164x > --- Bootup diagnostics for card in PCI slot 05:03.0 ---- > [ 0.601771] PCI: 0000:05:03.0 reg 10 32bit mmio: [febfec00, febfecff] > [ 0.601778] PCI: 0000:05:03.0 reg 14 io port: [ec00, ec07] > [ 0.601784] PCI: 0000:05:03.0 reg 18 io port: [e400, e4ff] > [ 0.601815] pci 0000:05:03.0: supports D2 > [ 0.601816] pci 0000:05:03.0: PME# supported from D2 D3hot D3cold > [ 0.601820] pci 0000:05:03.0: PME# disabled > [ 11.512444] martian 0000:05:03.0: PCI INT A -> GSI 22 (level, low) -> IRQ > 22 > > The PCI slot 05:03.0 of the modem card may be disabled early in > a bootup process, but then enabled later. If modem drivers load > but the modem is not responsive, read DOCs/Bootup.txt about possible > fixes. > Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx > if help is needed. > > > For candidate card in slot 00:1b.0, firmware information and bootup > diagnostics are: > PCI slot PCI ID SubsystemID Name > ---------- --------- --------- -------------- > 00:1b.0 8086:3a3e 1462:7514 Audio device: Intel > Corporation 82801JI > > Modem interrupt assignment and sharing: > 22: 261 258 IO-APIC-fasteoi HDA Intel, 164x > --- Bootup diagnostics for card in PCI slot 00:1b.0 ---- > [ 0.601246] PCI: 0000:00:1b.0 reg 10 64bit mmio: [fe7f8000, fe7fbfff] > [ 0.601246] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold > [ 0.601246] pci 0000:00:1b.0: PME# disabled > [ 11.113941] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> > IRQ 22 > [ 11.113964] HDA Intel 0000:00:1b.0: setting latency timer to 64 > > The PCI slot 00:1b.0 of the modem card may be disabled early in > a bootup process, but then enabled later. If modem drivers load > but the modem is not responsive, read DOCs/Bootup.txt about possible > fixes. > Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx > if help is needed. > > > > ===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== > The ALSA packages provide audio support and also drivers for some modems. > ALSA diagnostics are written during bootup to /proc/asound/ folders. > > The /proc/asound/pcm file reports: > ----------------------- > 00-02: ALC888 Analog : ALC888 Analog : capture 1 > 00-01: ALC888 Digital : ALC888 Digital : playback 1 > 00-00: ALC888 Analog : ALC888 Analog : playback 1 : capture 1 > > about /proc/asound/cards: > ------------------------ > 0 [Intel ]: HDA-Intel - HDA Intel > HDA Intel at 0xfe7f8000 irq 22 > > PCI slot 00:1b.0 has a High Definition Audio Card > The drivers are in the kernel modules tree at: > /lib/modules/2.6.27-7-server/kernel/sound/pci/hda/snd-hda-intel.ko > New HDA card type: > > > > UNEXPECTED HDA diagnostic outcome. > === Finished firmware and bootup diagnostics, next deducing cogent software. > === > > Predictive diagnostics for card in bus 05:03.0: > Modem chipset detected on > NAME="Communication controller: Agere Systems 56k WinModem " > CLASS=0780 > PCIDEV=11c1:0440 > SUBSYS=11c1:0440 > IRQ=22 > IDENT=Agere.DSP > > For candidate modem in: 05:03.0 > 0780 Communication controller: Agere Systems 56k WinModem > Primary device ID: 11c1:0440 > Support type needed or chipset: Agere.DSP > > > > Writing DOCs/Intel.txt > > > Predictive diagnostics for card in bus 00:1b.0: > Modem chipset not detected on > NAME="Audio device: Intel Corporation 82801JI " > CLASS=0403 > PCIDEV=8086:3a3e > SUBSYS=1462:7514 > IRQ=22 > > For candidate modem in: 00:1b.0 > 0403 Audio device: Intel Corporation 82801JI > Primary device ID: 8086:3a3e > Support type needed or chipset: > > > > scanModem could not identify the Support Type needed from diagnosics or > archives. > If an alternative boot into Microsoft windows can be done, do mouse > clicks on: > Start > Settings > Control Panel > Classical View (for Window XP) > System >> Hardware > Device Manager > Modems > Click on the + > Modem. Double click >> to > expand the graphic. Manufacturer information may be displayed. For example, > CXT > stands for Conexant. Click the Diagnostics Tab. Record any hardware ID or > vendor > and device information. > Next do the Query Modem and record the ATI specifications displayed such as: > ATI3 - Agere SoftModem Version 2.1.22 > ATI5 - 2.1.22, AMR Intel MB, AC97 ID:SIL REV:0x27 > Try to identify the modem setup file, with name perhaps MODEM.INF. > If may contain chipset Vendor informaton. > > > Completed candidate modem analyses. > > The base of the UDEV device file system is: /dev/.udev > > Versions adequately match for the compiler installed: 4.3.2 > and the compiler used in kernel assembly: 4.3.2 > > linux-headers-2.6.27-7-server resources needed for compiling are not > manifestly ready! > > If compiling is necessary packages must be installed, providing: > linux-headers-2.6.27-7-server > Compressed files at: /usr/src/ltmodem-2.6-alk-8.tar.bz2 > /usr/src/ltmodem-2.6-alk-9.tar.bz2 > > > If a driver compilation fails, with message including some lack of some > FileName.h (stdio.h for example), then > Some additional kernel-header files need installation to /usr/include. The > minimal additional packages are libc6-dev > and any of its dependents, under Ubuntu linux-libc-dev > > If an alternate ethernet connection is available, > $ apt-get update > $ apt-get -s install linux-kernel-devel > will install needed packages. > For Debian/Ubuntu related distributions, run the following command to > display the needed package list: > > Otherwise packages have to be found through http://packages.ubuntu.com > Once downloaded and transferred into a Linux partition, > they can be installed alltogether with: > $ sudo dpkg -i *.deb > > > Checking pppd properties: > -rwsr-xr-- 1 root dip 273064 2008-10-16 09:51 /usr/sbin/pppd > > In case of an "error 17" "serial loopback" problem, see: > http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html > > To enable dialout without Root permission do: > $ su - root (not for Ubuntu) > sudo chmod a+x /usr/sbin/pppd > or under Ubuntu related Linuxes > sudo chmod a+x /usr/sbin/pppd > > Checking settings of: /etc/ppp/options > asyncmap 0 > noauth > crtscts > lock > hide-password > modem > proxyarp > lcp-echo-interval 30 > lcp-echo-failure 4 > noipx > > In case of a message like: > Warning: Could not modify /etc/ppp/pap-secrets: Permission denied > see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html > > Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 vnet0 > Which can interfere with Browser naviagation. > > Don't worry about the following, it is for experts should trouble shooting > be necessary. > ========================================================== > > Checking for modem support lines: > -------------------------------------- > /device/modem symbolic link: lrwxrwxrwx 1 root root 12 2009-04-13 > 15:52 /dev/modem -> /dev/ttyLTM0 > slmodemd created symbolic link /dev/ttySL0: > Within /etc/udev/ files: > > Within /etc/modprobe.conf files: > > Within any ancient /etc/devfs files: > > Within ancient kernel 2.4.n /etc/module.conf files: > > --------- end modem support lines -------- > > > CPU0 CPU1 > 0: 80 30 IO-APIC-edge timer > 1: 1 1 IO-APIC-edge i8042 > 4: 1 1 IO-APIC-edge > 7: 0 0 IO-APIC-edge parport0 > 8: 43 40 IO-APIC-edge rtc0 > 9: 0 0 IO-APIC-fasteoi acpi > 12: 2 2 IO-APIC-edge i8042 > 16: 0 0 IO-APIC-fasteoi uhci_hcd:usb1, ahci > 17: 0 0 IO-APIC-fasteoi pata_jmicron > 18: 0 0 IO-APIC-fasteoi ehci_hcd:usb4, uhci_hcd:usb7 > 19: 109202 106078 IO-APIC-fasteoi uhci_hcd:usb3, uhci_hcd:usb6, > ata_piix, ata_piix > 20: 8516348 8519374 IO-APIC-fasteoi wctdm > 21: 0 0 IO-APIC-fasteoi uhci_hcd:usb2 > 22: 261 258 IO-APIC-fasteoi HDA Intel, 164x > 23: 0 0 IO-APIC-fasteoi uhci_hcd:usb5, ehci_hcd:usb8 > 219: 12069 12172 PCI-MSI-edge eth0 > NMI: 0 0 Non-maskable interrupts > LOC: 366496 348561 Local timer interrupts > RES: 3199 2656 Rescheduling interrupts > CAL: 5035 4918 function call interrupts > TLB: 2660 2924 TLB shootdowns > SPU: 0 0 Spurious interrupts > ERR: 0 > MIS: 0 > > [ 0.000000] Initializing cgroup subsys cpuset > [ 0.000000] Initializing cgroup subsys cpu > [ 0.000000] Linux version 2.6.27-7-server (buildd@rothera) (gcc version > 4.3.2 (Ubuntu 4.3.2-1ubuntu10) ) #1 SMP Fri Oct 24 07:37:55 UTC 2008 (Ubuntu > 2.6.27-7.14-server) > [ 0.000000] BIOS-provided physical RAM map: > [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ac00 (usable) > [ 0.000000] BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved) > [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) > [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bff90000 (usable) > [ 0.000000] BIOS-e820: 00000000bff90000 - 00000000bff9e000 (ACPI data) > [ 0.000000] BIOS-e820: 00000000bff9e000 - 00000000bffe0000 (ACPI NVS) > [ 0.000000] BIOS-e820: 00000000bffe0000 - 00000000c0000000 (reserved) > [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) > [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) > [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) > [ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x1000000 > [ 0.000000] kernel direct mapping tables up to 38000000 @ 7000-c000 > [ 0.000000] NX (Execute Disable) protection: active > [ 0.000000] RAMDISK: 377cd000 - 37fef65b > [ 0.000000] DMI present. > [ 0.000000] ACPI: RSDP 000F99D0, 0014 (r0 ACPIAM) > [ 0.000000] ACPI: RSDT BFF90000, 0040 (r1 7514MS A7514200 20080911 MSFT > 97) > [ 0.000000] ACPI: FACP BFF90200, 0084 (r1 7514MS A7514200 20080911 MSFT > 97) > [ 0.000000] ACPI: DSDT BFF905C0, 64FA (r1 A7514 A7514200 200 INTL > 20051117) > [ 0.000000] ACPI: FACS BFF9E000, 0040 > [ 0.000000] ACPI: APIC BFF90390, 006C (r1 7514MS A7514200 20080911 MSFT > 97) > [ 0.000000] ACPI: MCFG BFF90400, 003C (r1 7514MS OEMMCFG 20080911 MSFT > 97) > [ 0.000000] ACPI: SLIC BFF90440, 0176 (r1 7514MS A7514200 20080911 MSFT > 97) > [ 0.000000] ACPI: OEMB BFF9E040, 0072 (r1 7514MS A7514200 20080911 MSFT > 97) > [ 0.000000] ACPI: HPET BFF985C0, 0038 (r1 7514MS OEMHPET 20080911 MSFT > 97) > [ 0.000000] ACPI: SSDT BFF9E5C0, 0A7C (r1 DpgPmm CpuPm 12 INTL > 20051117) > [ 0.000000] 4224MB HIGHMEM available. > [ 0.000000] 896MB LOWMEM available. > [ 0.000000] mapped low ram: 0 - 38000000 > [ 0.000000] low ram: 00000000 - 38000000 > [ 0.000000] bootmap 00009000 - 00010000 > [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0038000000] > [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> > [0000000000 - 0000001000] > [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> > [0000001000 - 0000002000] > [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> > [0000006000 - 0000007000] > [ 0.000000] #3 [0000100000 - 00005e8220] TEXT DATA BSS ==> > [0000100000 - 00005e8220] > [ 0.000000] #4 [00377cd000 - 0037fef65b] RAMDISK ==> > [00377cd000 - 0037fef65b] > [ 0.000000] #5 [00005e9000 - 00005f1000] INIT_PG_TABLE ==> > [00005e9000 - 00005f1000] > [ 0.000000] #6 [000009ac00 - 0000100000] BIOS reserved ==> > [000009ac00 - 0000100000] > [ 0.000000] #7 [0000007000 - 0000009000] PGTABLE ==> > [0000007000 - 0000009000] > [ 0.000000] #8 [0000009000 - 0000010000] BOOTMAP ==> > [0000009000 - 0000010000] > [ 0.000000] found SMP MP-table at [c00ff780] 000ff780 > [ 0.000000] Zone PFN ranges: > [ 0.000000] DMA 0x00000000 -> 0x00001000 > [ 0.000000] Normal 0x00001000 -> 0x00038000 > [ 0.000000] HighMem 0x00038000 -> 0x00140000 > [ 0.000000] Movable zone start PFN for each node > [ 0.000000] early_node_map[3] active PFN ranges > [ 0.000000] 0: 0x00000000 -> 0x0000009a > [ 0.000000] 0: 0x00000100 -> 0x000bff90 > [ 0.000000] 0: 0x00100000 -> 0x00140000 > [ 0.000000] On node 0 totalpages: 1048362 > [ 0.000000] free_area_init_node: node 0, pgdat c049eb00, node_mem_map > c1000000 > [ 0.000000] DMA zone: 3958 pages, LIFO batch:0 > [ 0.000000] Normal zone: 223300 pages, LIFO batch:31 > [ 0.000000] HighMem zone: 809584 pages, LIFO batch:31 > [ 0.000000] ACPI: PM-Timer IO Port: 0x808 > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) > [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI > 0-23 > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > [ 0.000000] ACPI: IRQ0 used by override. > [ 0.000000] ACPI: IRQ2 used by override. > [ 0.000000] ACPI: IRQ9 used by override. > [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs > [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 > [ 0.000000] Using ACPI (MADT) for SMP configuration information > [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs > [ 0.000000] mapped APIC to ffffb000 (fee00000) > [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) > [ 0.000000] PM: Registered nosave memory: 000000000009a000 - > 000000000009b000 > [ 0.000000] PM: Registered nosave memory: 000000000009b000 - > 00000000000a0000 > [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - > 00000000000e0000 > [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - > 0000000000100000 > [ 0.000000] Allocating PCI resources starting at c4000000 (gap: > c0000000:3ee00000) > [ 0.000000] PERCPU: Allocating 45852 bytes of per cpu data > [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1 > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total > pages: 1036842 > [ 0.000000] Kernel command line: root=/dev/mapper/pst--server-root ro > quiet splash > [ 0.000000] Enabling fast FPU save and restore... done. > [ 0.000000] Enabling unmasked SIMD FPU exception support... done. > [ 0.000000] Initializing CPU#0 > [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) > [ 0.000000] TSC: PIT calibration confirmed by PMTIMER. > [ 0.000000] TSC: using PMTIMER calibration value > [ 0.000000] Detected 2606.458 MHz processor. > [ 0.010000] Console: colour VGA+ 80x25 > [ 0.010000] console [tty0] enabled > [ 0.010000] Dentry cache hash table entries: 131072 (order: 7, 524288 > bytes) > [ 0.010000] Inode-cache hash table entries: 65536 (order: 6, 262144 > bytes) > [ 0.010000] Memory: 4132024k/5242880k available (2628k kernel code, > 60552k reserved, 1201k data, 436k init, 3276352k highmem) > [ 0.010000] virtual kernel memory layout: > [ 0.010000] fixmap : 0xffc78000 - 0xfffff000 (3612 kB) > [ 0.010000] pkmap : 0xff800000 - 0xffa00000 (2048 kB) > [ 0.010000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) > [ 0.010000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) > [ 0.010000] .init : 0xc04c3000 - 0xc0530000 ( 436 kB) > [ 0.010000] .data : 0xc0391026 - 0xc04bd800 (1201 kB) > [ 0.010000] .text : 0xc0100000 - 0xc0391026 (2628 kB) > [ 0.010000] Checking if this processor honours the WP bit even in > supervisor mode...Ok. > [ 0.010000] CPA: page pool initialized 1 of 1 pages preallocated > [ 0.010000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, > CPUs=4, Nodes=1 > [ 0.010000] hpet clockevent registered > [ 0.010000] Calibrating delay loop (skipped), value calculated using > timer frequency.. 5212.91 BogoMIPS (lpj=26064580) > [ 0.010000] Security Framework initialized > [ 0.010000] SELinux: Disabled at boot. > [ 0.010000] AppArmor: AppArmor initialized > [ 0.010000] Mount-cache hash table entries: 512 > [ 0.010000] Initializing cgroup subsys ns > [ 0.010000] Initializing cgroup subsys cpuacct > [ 0.010000] Initializing cgroup subsys memory > [ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K > [ 0.010000] CPU: L2 cache: 2048K > [ 0.010000] CPU: Physical Processor ID: 0 > [ 0.010000] CPU: Processor Core ID: 0 > [ 0.010000] using mwait in idle threads. > [ 0.010000] Checking 'hlt' instruction... OK. > [ 0.041677] ACPI: Core revision 20080609 > [ 0.043792] ACPI: Checking initramfs for custom DSDT > [ 0.310160] ENABLING IO-APIC IRQs > [ 0.310329] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 > [ 0.414922] CPU0: Intel Pentium(R) Dual-Core CPU E5300 @ 2.60GHz > stepping 0a > [ 0.420000] Booting processor 1/1 ip 6000 > [ 0.010000] Initializing CPU#1 > [ 0.010000] Calibrating delay using timer specific routine.. 5212.93 > BogoMIPS (lpj=26064664) > [ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K > [ 0.010000] CPU: L2 cache: 2048K > [ 0.010000] CPU: Physical Processor ID: 0 > [ 0.010000] CPU: Processor Core ID: 1 > [ 0.570421] CPU1: Intel Pentium(R) Dual-Core CPU E5300 @ 2.60GHz > stepping 0a > [ 0.570432] checking TSC synchronization [CPU#0 -> CPU#1]: passed. > [ 0.580020] Brought up 2 CPUs > [ 0.580022] Total of 2 processors activated (10425.84 BogoMIPS). > [ 0.580041] CPU0 attaching sched-domain: > [ 0.580043] domain 0: span 0-1 level MC > [ 0.580045] groups: 0 1 > [ 0.580050] CPU1 attaching sched-domain: > [ 0.580052] domain 0: span 0-1 level MC > [ 0.580054] groups: 1 0 > [ 0.580114] net_namespace: 840 bytes > [ 0.580114] Booting paravirtualized kernel on bare hardware > [ 0.580197] Time: 5:57:30 Date: 04/13/09 > [ 0.580217] NET: Registered protocol family 16 > [ 0.580231] EISA bus registered > [ 0.580231] ACPI: bus type pci registered > [ 0.580231] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - > 255 > [ 0.580231] PCI: Not using MMCONFIG. > [ 0.580231] PCI: Using configuration type 1 for base access > [ 0.580747] ACPI: EC: Look up EC in DSDT > [ 0.590951] ACPI: Interpreter enabled > [ 0.590954] ACPI: (supports S0 S1 S3 S4 S5) > [ 0.590967] ACPI: Using IOAPIC for interrupt routing > [ 0.591019] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - > 255 > [ 0.594598] PCI: MCFG area at e0000000 reserved in ACPI motherboard > resources > [ 0.594600] PCI: Using MMCONFIG for extended config space > [ 0.601246] ACPI: PCI Root Bridge [PCI0] (0000:00) > [ 0.601246] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold > [ 0.601246] pci 0000:00:01.0: PME# disabled > [ 0.601246] PCI: 0000:00:1a.0 reg 20 io port: [ac00, ac1f] > [ 0.601246] PCI: 0000:00:1a.1 reg 20 io port: [a880, a89f] > [ 0.601246] PCI: 0000:00:1a.2 reg 20 io port: [a800, a81f] > [ 0.601246] PCI: 0000:00:1a.7 reg 10 32bit mmio: [fe7ffc00, fe7fffff] > [ 0.601246] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold > [ 0.601246] pci 0000:00:1a.7: PME# disabled > [ 0.601246] PCI: 0000:00:1b.0 reg 10 64bit mmio: [fe7f8000, fe7fbfff] > [ 0.601246] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold > [ 0.601246] pci 0000:00:1b.0: PME# disabled > [ 0.601246] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold > [ 0.601246] pci 0000:00:1c.0: PME# disabled > [ 0.601246] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold > [ 0.601246] pci 0000:00:1c.1: PME# disabled > [ 0.601246] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold > [ 0.601246] pci 0000:00:1c.5: PME# disabled > [ 0.601246] PCI: 0000:00:1d.0 reg 20 io port: [a480, a49f] > [ 0.601246] PCI: 0000:00:1d.1 reg 20 io port: [a400, a41f] > [ 0.601246] PCI: 0000:00:1d.2 reg 20 io port: [a080, a09f] > [ 0.601246] PCI: 0000:00:1d.7 reg 10 32bit mmio: [fe7ff800, fe7ffbff] > [ 0.601246] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold > [ 0.601246] pci 0000:00:1d.7: PME# disabled > [ 0.601246] PCI: 0000:00:1f.2 reg 10 io port: [a000, a007] > [ 0.601246] PCI: 0000:00:1f.2 reg 14 io port: [9c00, 9c03] > [ 0.601246] PCI: 0000:00:1f.2 reg 18 io port: [9880, 9887] > [ 0.601246] PCI: 0000:00:1f.2 reg 1c io port: [9800, 9803] > [ 0.601246] PCI: 0000:00:1f.2 reg 20 io port: [9480, 948f] > [ 0.601246] PCI: 0000:00:1f.2 reg 24 io port: [9400, 940f] > [ 0.601246] PCI: 0000:00:1f.3 reg 10 64bit mmio: [fe7ff400, fe7ff4ff] > [ 0.601246] PCI: 0000:00:1f.3 reg 20 io port: [400, 41f] > [ 0.601246] PCI: 0000:00:1f.5 reg 10 io port: [9000, 9007] > [ 0.601246] PCI: 0000:00:1f.5 reg 14 io port: [8c00, 8c03] > [ 0.601246] PCI: 0000:00:1f.5 reg 18 io port: [8880, 8887] > [ 0.601246] PCI: 0000:00:1f.5 reg 1c io port: [8800, 8803] > [ 0.601246] PCI: 0000:00:1f.5 reg 20 io port: [8480, 848f] > [ 0.601246] PCI: 0000:00:1f.5 reg 24 io port: [8400, 840f] > [ 0.601246] PCI: 0000:01:00.0 reg 10 32bit mmio: [f0000000, f7ffffff] > [ 0.601246] PCI: 0000:01:00.0 reg 18 64bit mmio: [fe8f0000, fe8fffff] > [ 0.601246] PCI: 0000:01:00.0 reg 20 io port: [b000, b0ff] > [ 0.601246] PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff] > [ 0.601246] pci 0000:01:00.0: supports D1 > [ 0.601246] pci 0000:01:00.0: supports D2 > [ 0.601246] PCI: 0000:01:00.1 reg 10 64bit mmio: [fe8e0000, fe8effff] > [ 0.601246] pci 0000:01:00.1: supports D1 > [ 0.601246] pci 0000:01:00.1: supports D2 > [ 0.601246] PCI: bridge 0000:00:01.0 io port: [b000, bfff] > [ 0.601246] PCI: bridge 0000:00:01.0 32bit mmio: [fe800000, fe8fffff] > [ 0.601246] PCI: bridge 0000:00:01.0 64bit mmio pref: [f0000000, > f7ffffff] > [ 0.601294] PCI: 0000:02:00.0 reg 24 32bit mmio: [fe9fe000, fe9fffff] > [ 0.601323] pci 0000:02:00.0: PME# supported from D3hot > [ 0.601327] pci 0000:02:00.0: PME# disabled > [ 0.601365] PCI: 0000:02:00.1 reg 10 io port: [cc00, cc07] > [ 0.601373] PCI: 0000:02:00.1 reg 14 io port: [c880, c883] > [ 0.601381] PCI: 0000:02:00.1 reg 18 io port: [c800, c807] > [ 0.601389] PCI: 0000:02:00.1 reg 1c io port: [c480, c483] > [ 0.601397] PCI: 0000:02:00.1 reg 20 io port: [c400, c40f] > [ 0.601468] PCI: bridge 0000:00:1c.0 io port: [c000, cfff] > [ 0.601471] PCI: bridge 0000:00:1c.0 32bit mmio: [fe900000, fe9fffff] > [ 0.601556] PCI: 0000:04:00.0 reg 10 io port: [d800, d8ff] > [ 0.601569] PCI: 0000:04:00.0 reg 18 32bit mmio: [fdfff000, fdffffff] > [ 0.601582] PCI: 0000:04:00.0 reg 20 32bit mmio: [fdfe0000, fdfeffff] > [ 0.601595] PCI: 0000:04:00.0 reg 30 32bit mmio: [feaf0000, feafffff] > [ 0.601621] pci 0000:04:00.0: supports D1 > [ 0.601623] pci 0000:04:00.0: supports D2 > [ 0.601624] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold > [ 0.601629] pci 0000:04:00.0: PME# disabled > [ 0.601658] PCI: bridge 0000:00:1c.5 io port: [d000, dfff] > [ 0.601661] PCI: bridge 0000:00:1c.5 32bit mmio: [fea00000, feafffff] > [ 0.601666] PCI: bridge 0000:00:1c.5 64bit mmio pref: [fdf00000, > fdffffff] > [ 0.601697] PCI: 0000:05:01.0 reg 10 io port: [e800, e8ff] > [ 0.601703] PCI: 0000:05:01.0 reg 14 32bit mmio: [febff000, febfffff] > [ 0.601739] pci 0000:05:01.0: supports D2 > [ 0.601741] pci 0000:05:01.0: PME# supported from D0 D2 D3hot D3cold > [ 0.601744] pci 0000:05:01.0: PME# disabled > [ 0.601771] PCI: 0000:05:03.0 reg 10 32bit mmio: [febfec00, febfecff] > [ 0.601778] PCI: 0000:05:03.0 reg 14 io port: [ec00, ec07] > [ 0.601784] PCI: 0000:05:03.0 reg 18 io port: [e400, e4ff] > [ 0.601815] pci 0000:05:03.0: supports D2 > [ 0.601816] pci 0000:05:03.0: PME# supported from D2 D3hot D3cold > [ 0.601820] pci 0000:05:03.0: PME# disabled > [ 0.601853] pci 0000:00:1e.0: transparent bridge > [ 0.601856] PCI: bridge 0000:00:1e.0 io port: [e000, efff] > [ 0.601860] PCI: bridge 0000:00:1e.0 32bit mmio: [feb00000, febfffff] > [ 0.601882] bus 00 -> node 0 > [ 0.601887] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > [ 0.602143] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] > [ 0.602347] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] > [ 0.602454] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] > [ 0.602559] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] > [ 0.602824] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 > 15) > [ 0.602824] ACPI: PCI Interrupt Link [LNKB] (IRQs *5) > [ 0.602824] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 *14 > 15) > [ 0.602824] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 14 > *15) > [ 0.602824] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 *10 11 12 14 > 15) > [ 0.602824] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 *11 12 14 > 15) > [ 0.602824] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 > 15) > [ 0.602824] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *6 7 10 11 12 14 > 15) > [ 0.610077] ACPI Warning (tbutils-0217): Incorrect checksum in table > [OEMB] - 86, should be 81 [20080609] > [ 0.610093] Linux Plug and Play Support v0.97 (c) Adam Belay > [ 0.610101] pnp: PnP ACPI init > [ 0.610101] ACPI: bus type pnp registered > [ 0.611121] pnp: PnP ACPI: found 16 devices > [ 0.611121] ACPI: ACPI bus type pnp unregistered > [ 0.611121] PnPBIOS: Disabled by ACPI PNP > [ 0.611121] PCI: Using ACPI for IRQ routing > [ 0.630012] NET: Registered protocol family 8 > [ 0.630016] NET: Registered protocol family 20 > [ 0.630039] NetLabel: Initializing > [ 0.630039] NetLabel: domain hash size = 128 > [ 0.630039] NetLabel: protocols = UNLABELED CIPSOv4 > [ 0.630052] NetLabel: unlabeled traffic allowed by default > [ 0.630060] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 > [ 0.630068] hpet0: 4 64-bit timers, 14318180 Hz > [ 0.631756] tracer: 772 pages allocated for 65536 entries of 48 bytes > [ 0.631759] actual entries 65620 > [ 0.631826] AppArmor: AppArmor Filesystem Enabled > [ 0.631842] ACPI: RTC can wake from S4 > [ 0.640009] Switched to high resolution mode on CPU 0 > [ 0.640443] Switched to high resolution mode on CPU 1 > [ 0.650028] system 00:01: iomem range 0xfed14000-0xfed19fff has been > reserved > [ 0.650035] system 00:01: iomem range 0xfed90000-0xfed93fff has been > reserved > [ 0.650053] system 00:08: ioport range 0x4c0-0x4ff has been reserved > [ 0.650059] system 00:08: ioport range 0x4d0-0x4d1 has been reserved > [ 0.650065] system 00:08: ioport range 0x800-0x87f has been reserved > [ 0.650071] system 00:08: ioport range 0x480-0x4bf has been reserved > [ 0.650077] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been > reserved > [ 0.650083] system 00:08: iomem range 0xfed20000-0xfed3ffff has been > reserved > [ 0.650089] system 00:08: iomem range 0xfed40000-0xfed8ffff has been > reserved > [ 0.650102] system 00:0b: iomem range 0xffc00000-0xffefffff could not be > reserved > [ 0.650112] system 00:0c: iomem range 0xfec00000-0xfec00fff has been > reserved > [ 0.650119] system 00:0c: iomem range 0xfee00000-0xfee00fff could not be > reserved > [ 0.650129] system 00:0d: ioport range 0xa00-0xadf has been reserved > [ 0.650135] system 00:0d: ioport range 0xae0-0xaef has been reserved > [ 0.650145] system 00:0e: iomem range 0xe0000000-0xefffffff has been > reserved > [ 0.650156] system 00:0f: iomem range 0x0-0x9ffff could not be reserved > [ 0.650164] system 00:0f: iomem range 0xc0000-0xcffff could not be > reserved > [ 0.650167] system 00:0f: iomem range 0xe0000-0xfffff could not be > reserved > [ 0.650169] system 00:0f: iomem range 0x100000-0xbfffffff could not be > reserved > [ 0.650172] system 00:0f: iomem range 0xfed90000-0xffffffff could not be > reserved > [ 0.685104] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 > [ 0.685106] pci 0000:00:01.0: IO window: 0xb000-0xbfff > [ 0.685109] pci 0000:00:01.0: MEM window: 0xfe800000-0xfe8fffff > [ 0.685112] pci 0000:00:01.0: PREFETCH window: > 0x000000f0000000-0x000000f7ffffff > [ 0.685116] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 > [ 0.685119] pci 0000:00:1c.0: IO window: 0xc000-0xcfff > [ 0.685123] pci 0000:00:1c.0: MEM window: 0xfe900000-0xfe9fffff > [ 0.685126] pci 0000:00:1c.0: PREFETCH window: disabled > [ 0.685132] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 > [ 0.685133] pci 0000:00:1c.1: IO window: disabled > [ 0.685137] pci 0000:00:1c.1: MEM window: disabled > [ 0.685140] pci 0000:00:1c.1: PREFETCH window: disabled > [ 0.685146] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04 > [ 0.685148] pci 0000:00:1c.5: IO window: 0xd000-0xdfff > [ 0.685152] pci 0000:00:1c.5: MEM window: 0xfea00000-0xfeafffff > [ 0.685156] pci 0000:00:1c.5: PREFETCH window: > 0x000000fdf00000-0x000000fdffffff > [ 0.685161] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05 > [ 0.685164] pci 0000:00:1e.0: IO window: 0xe000-0xefff > [ 0.685168] pci 0000:00:1e.0: MEM window: 0xfeb00000-0xfebfffff > [ 0.685171] pci 0000:00:1e.0: PREFETCH window: disabled > [ 0.685182] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 0.685185] pci 0000:00:01.0: setting latency timer to 64 > [ 0.685192] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > [ 0.685196] pci 0000:00:1c.0: setting latency timer to 64 > [ 0.685201] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 > [ 0.685205] pci 0000:00:1c.1: setting latency timer to 64 > [ 0.685210] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 > [ 0.685214] pci 0000:00:1c.5: setting latency timer to 64 > [ 0.685219] pci 0000:00:1e.0: setting latency timer to 64 > [ 0.685222] bus: 00 index 0 io port: [0, ffff] > [ 0.685224] bus: 00 index 1 mmio: [0, ffffffffffffffff] > [ 0.685225] bus: 01 index 0 io port: [b000, bfff] > [ 0.685227] bus: 01 index 1 mmio: [fe800000, fe8fffff] > [ 0.685229] bus: 01 index 2 mmio: [f0000000, f7ffffff] > [ 0.685230] bus: 01 index 3 mmio: [0, 0] > [ 0.685231] bus: 02 index 0 io port: [c000, cfff] > [ 0.685233] bus: 02 index 1 mmio: [fe900000, fe9fffff] > [ 0.685234] bus: 02 index 2 mmio: [0, 0] > [ 0.685236] bus: 02 index 3 mmio: [0, 0] > [ 0.685237] bus: 03 index 0 mmio: [0, 0] > [ 0.685239] bus: 03 index 1 mmio: [0, 0] > [ 0.685240] bus: 03 index 2 mmio: [0, 0] > [ 0.685241] bus: 03 index 3 mmio: [0, 0] > [ 0.685242] bus: 04 index 0 io port: [d000, dfff] > [ 0.685244] bus: 04 index 1 mmio: [fea00000, feafffff] > [ 0.685246] bus: 04 index 2 mmio: [fdf00000, fdffffff] > [ 0.685247] bus: 04 index 3 mmio: [0, 0] > [ 0.685248] bus: 05 index 0 io port: [e000, efff] > [ 0.685250] bus: 05 index 1 mmio: [feb00000, febfffff] > [ 0.685251] bus: 05 index 2 mmio: [0, 0] > [ 0.685253] bus: 05 index 3 io port: [0, ffff] > [ 0.685254] bus: 05 index 4 mmio: [0, ffffffffffffffff] > [ 0.685260] NET: Registered protocol family 2 > [ 0.720073] IP route cache hash table entries: 32768 (order: 5, 131072 > bytes) > [ 0.720285] TCP established hash table entries: 131072 (order: 8, 1048576 > bytes) > [ 0.720584] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) > [ 0.720756] TCP: Hash tables configured (established 131072 bind 65536) > [ 0.720758] TCP reno registered > [ 0.730111] NET: Registered protocol family 1 > [ 0.730220] checking if image is initramfs... it is > [ 1.254640] Freeing initrd memory: 8329k freed > [ 1.255484] audit: initializing netlink socket (disabled) > [ 1.255503] type=2000 audit(1239602250.250:1): initialized > [ 1.260365] highmem bounce pool size: 64 pages > [ 1.260370] HugeTLB registered 2 MB page size, pre-allocated 0 pages > [ 1.262131] VFS: Disk quotas dquot_6.5.1 > [ 1.262195] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > [ 1.262270] msgmni has been set to 1689 > [ 1.262360] io scheduler noop registered > [ 1.262362] io scheduler anticipatory registered > [ 1.262364] io scheduler deadline registered (default) > [ 1.262373] io scheduler cfq registered > [ 1.262492] pci 0000:01:00.0: Boot video device > [ 1.262583] pcieport-driver 0000:00:01.0: setting latency timer to 64 > [ 1.262610] pcieport-driver 0000:00:01.0: found MSI capability > [ 1.262633] pci_express 0000:00:01.0:pcie00: allocate port service > [ 1.262664] pci_express 0000:00:01.0:pcie03: allocate port service > [ 1.262727] pcieport-driver 0000:00:1c.0: setting latency timer to 64 > [ 1.262755] pcieport-driver 0000:00:1c.0: found MSI capability > [ 1.262783] pci_express 0000:00:1c.0:pcie00: allocate port service > [ 1.262816] pci_express 0000:00:1c.0:pcie02: allocate port service > [ 1.262844] pci_express 0000:00:1c.0:pcie03: allocate port service > [ 1.262913] pcieport-driver 0000:00:1c.1: setting latency timer to 64 > [ 1.262941] pcieport-driver 0000:00:1c.1: found MSI capability > [ 1.262969] pci_express 0000:00:1c.1:pcie00: allocate port service > [ 1.262997] pci_express 0000:00:1c.1:pcie02: allocate port service > [ 1.263025] pci_express 0000:00:1c.1:pcie03: allocate port service > [ 1.263093] pcieport-driver 0000:00:1c.5: setting latency timer to 64 > [ 1.263122] pcieport-driver 0000:00:1c.5: found MSI capability > [ 1.263150] pci_express 0000:00:1c.5:pcie00: allocate port service > [ 1.263178] pci_express 0000:00:1c.5:pcie02: allocate port service > [ 1.263205] pci_express 0000:00:1c.5:pcie03: allocate port service > [ 1.263442] isapnp: Scanning for PnP cards... > [ 1.619036] isapnp: No Plug & Play device found > [ 1.642125] hpet_resources: 0xfed00000 is busy > [ 1.642192] Serial: 8250/16550 driver4 ports, IRQ sharing enabled > [ 1.642297] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > [ 1.642813] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > [ 1.644108] brd: module loaded > [ 1.644160] input: Macintosh mouse button emulation as > /devices/virtual/input/input0 > [ 1.644294] PNP: No PS/2 controller found. Probing ports directly. > [ 1.646623] serio: i8042 KBD port at 0x60,0x64 irq 1 > [ 1.646627] serio: i8042 AUX port at 0x60,0x64 irq 12 > [ 1.661472] mice: PS/2 mouse device common for all mice > [ 1.661562] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 > [ 1.661582] rtc0: alarms up to one month, y3k, hpet irqs > [ 1.661676] EISA: Probing bus 0 at eisa.0 > [ 1.661698] Cannot allocate resource for EISA slot 8 > [ 1.661700] EISA: Detected 0 cards. > [ 1.661702] cpuidle: using governor ladder > [ 1.661704] cpuidle: using governor menu > [ 1.662081] TCP cubic registered > [ 1.662102] Using IPI No-Shortcut mode > [ 1.662229] registered taskstats version 1 > [ 1.662340] Magic number: 5:932:971 > [ 1.662426] rtc_cmos 00:03: setting system clock to 2009-04-13 05:57:31 > UTC (1239602251) > [ 1.662428] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found > [ 1.662430] EDD information not available. > [ 1.662608] Freeing unused kernel memory: 436k freed > [ 1.662681] Write protecting the kernel text: 2632k > [ 1.662712] Write protecting the kernel read-only data: 956k > [ 1.723245] fuse init (API version 7.9) > [ 1.739954] ACPI: SSDT BFF9E0C0, 0277 (r1 DpgPmm P001Ist 11 INTL > 20051117) > [ 1.740285] processor ACPI0007:00: registered as cooling_device0 > [ 1.740562] ACPI: SSDT BFF9E340, 0277 (r1 DpgPmm P002Ist 12 INTL > 20051117) > [ 1.740857] processor ACPI0007:01: registered as cooling_device1 > [ 1.753617] device-mapper: uevent: version 1.0.3 > [ 1.753778] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: > dm-devel@xxxxxxxxxx > [ 1.874439] usbcore: registered new interface driver usbfs > [ 1.874455] usbcore: registered new interface driver hub > [ 1.874481] usbcore: registered new device driver usb > [ 1.875835] USB Universal Host Controller Interface driver v3.0 > [ 1.875870] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> > IRQ 16 > [ 1.875878] uhci_hcd 0000:00:1a.0: setting latency timer to 64 > [ 1.875881] uhci_hcd 0000:00:1a.0: UHCI Host Controller > [ 1.875910] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus > number 1 > [ 1.875936] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ac00 > [ 1.876041] usb usb1: configuration #1 chosen from 1 choice > [ 1.876060] hub 1-0:1.0: USB hub found > [ 1.876065] hub 1-0:1.0: 2 ports detected > [ 1.974299] No dock devices found. > [ 1.981450] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> > IRQ 21 > [ 1.981459] uhci_hcd 0000:00:1a.1: setting latency timer to 64 > [ 1.981462] uhci_hcd 0000:00:1a.1: UHCI Host Controller > [ 1.981480] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus > number 2 > [ 1.981508] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880 > [ 1.981573] usb usb2: configuration #1 chosen from 1 choice > [ 1.981594] hub 2-0:1.0: USB hub found > [ 1.981600] hub 2-0:1.0: 2 ports detected > [ 2.009017] SCSI subsystem initialized > [ 2.037212] libata version 3.00 loaded. > [ 2.091476] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> > IRQ 19 > [ 2.091485] uhci_hcd 0000:00:1a.2: setting latency timer to 64 > [ 2.091488] uhci_hcd 0000:00:1a.2: UHCI Host Controller > [ 2.091513] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus > number 3 > [ 2.091541] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000a800 > [ 2.091609] usb usb3: configuration #1 chosen from 1 choice > [ 2.091629] hub 3-0:1.0: USB hub found > [ 2.091634] hub 3-0:1.0: 2 ports detected > [ 2.201734] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> > IRQ 18 > [ 2.201749] ehci_hcd 0000:00:1a.7: setting latency timer to 64 > [ 2.201752] ehci_hcd 0000:00:1a.7: EHCI Host Controller > [ 2.201773] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus > number 4 > [ 2.205656] ehci_hcd 0000:00:1a.7: debug port 1 > [ 2.205661] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported > [ 2.205672] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe7ffc00 > [ 2.221495] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 > Dec 2004 > [ 2.221647] usb usb4: configuration #1 chosen from 1 choice > [ 2.221668] hub 4-0:1.0: USB hub found > [ 2.221675] hub 4-0:1.0: 6 ports detected > [ 2.331526] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> > IRQ 23 > [ 2.331535] uhci_hcd 0000:00:1d.0: setting latency timer to 64 > [ 2.331538] uhci_hcd 0000:00:1d.0: UHCI Host Controller > [ 2.331559] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus > number 5 > [ 2.331587] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a480 > [ 2.331657] usb usb5: configuration #1 chosen from 1 choice > [ 2.331676] hub 5-0:1.0: USB hub found > [ 2.331681] hub 5-0:1.0: 2 ports detected > [ 2.440203] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> > IRQ 19 > [ 2.440209] uhci_hcd 0000:00:1d.1: setting latency timer to 64 > [ 2.440211] uhci_hcd 0000:00:1d.1: UHCI Host Controller > [ 2.440230] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus > number 6 > [ 2.440250] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400 > [ 2.440310] usb usb6: configuration #1 chosen from 1 choice > [ 2.440328] hub 6-0:1.0: USB hub found > [ 2.440333] hub 6-0:1.0: 2 ports detected > [ 2.550202] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> > IRQ 18 > [ 2.550208] uhci_hcd 0000:00:1d.2: setting latency timer to 64 > [ 2.550210] uhci_hcd 0000:00:1d.2: UHCI Host Controller > [ 2.550229] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus > number 7 > [ 2.550249] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a080 > [ 2.550311] usb usb7: configuration #1 chosen from 1 choice > [ 2.550330] hub 7-0:1.0: USB hub found > [ 2.550334] hub 7-0:1.0: 2 ports detected > [ 2.660235] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> > IRQ 23 > [ 2.660248] ehci_hcd 0000:00:1d.7: setting latency timer to 64 > [ 2.660250] ehci_hcd 0000:00:1d.7: EHCI Host Controller > [ 2.660267] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus > number 8 > [ 2.664145] ehci_hcd 0000:00:1d.7: debug port 1 > [ 2.664150] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported > [ 2.664155] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe7ff800 > [ 2.680012] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 > Dec 2004 > [ 2.680119] usb usb8: configuration #1 chosen from 1 choice > [ 2.680167] hub 8-0:1.0: USB hub found > [ 2.680172] hub 8-0:1.0: 6 ports detected > [ 2.790355] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded > [ 2.790368] r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ > 17 > [ 2.790383] r8169 0000:04:00.0: setting latency timer to 64 > [ 2.790648] eth0: RTL8168c/8111c at 0xf883e000, 00:21:85:5c:5b:d4, XID > 3c4000c0 IRQ 219 > [ 2.792675] ahci 0000:02:00.0: version 3.0 > [ 2.792689] ahci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > [ 2.820042] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 > impl SATA mode > [ 2.820045] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum > part > [ 2.820051] ahci 0000:02:00.0: setting latency timer to 64 > [ 2.820188] scsi0 : ahci > [ 2.820307] scsi1 : ahci > [ 2.820367] ata1: SATA max UDMA/133 abar m8192@0xfe9fe000 port 0xfe9fe100 > irq 16 > [ 2.820370] ata2: SATA max UDMA/133 abar m8192@0xfe9fe000 port 0xfe9fe180 > irq 16 > [ 3.160033] ata1: SATA link down (SStatus 0 SControl 300) > [ 3.531278] ata2: SATA link down (SStatus 0 SControl 300) > [ 3.553765] ata_piix 0000:00:1f.2: version 2.12 > [ 3.553778] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> > IRQ 19 > [ 3.553781] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] > [ 3.553822] ata_piix 0000:00:1f.2: setting latency timer to 64 > [ 3.554631] scsi2 : ata_piix > [ 3.555530] scsi3 : ata_piix > [ 3.556732] ata3: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 > irq 19 > [ 3.556737] ata4: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 > irq 19 > [ 4.060080] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > [ 4.080601] ata3.00: ATA-8: MAXTOR STM3500320AS, MX15, max UDMA/133 > [ 4.080606] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) > [ 4.120588] ata3.00: configured for UDMA/133 > [ 4.630077] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > [ 4.630179] ata4.01: NODEV after polling detection > [ 4.650198] ata4.00: ATAPI: TSSTcorp CDDVDW SH-S223F, SB02, max UDMA/100 > [ 4.690206] ata4.00: configured for UDMA/100 > [ 4.690294] scsi 2:0:0:0: Direct-Access ATA MAXTOR STM350032 > MX15 PQ: 0 ANSI: 5 > [ 4.690420] scsi 2:0:0:0: Attached scsi generic sg0 type 0 > [ 4.691042] scsi 3:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223F > SB02 PQ: 0 ANSI: 5 > [ 4.691186] scsi 3:0:0:0: Attached scsi generic sg1 type 5 > [ 4.691259] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> > IRQ 19 > [ 4.691262] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] > [ 4.691303] ata_piix 0000:00:1f.5: setting latency timer to 64 > [ 4.691339] scsi4 : ata_piix > [ 4.691386] scsi5 : ata_piix > [ 4.692394] ata5: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 > irq 19 > [ 4.692398] ata6: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 > irq 19 > [ 5.051923] ata5: SATA link down (SStatus 0 SControl 300) > [ 5.410669] ata6: SATA link down (SStatus 0 SControl 300) > [ 5.410710] pata_jmicron 0000:02:00.1: enabling device (0000 -> 0001) > [ 5.410718] pata_jmicron 0000:02:00.1: PCI INT B -> GSI 17 (level, low) > -> IRQ 17 > [ 5.410748] pata_jmicron 0000:02:00.1: setting latency timer to 64 > [ 5.410798] scsi6 : pata_jmicron > [ 5.410847] scsi7 : pata_jmicron > [ 5.411336] ata7: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 > irq 17 > [ 5.411338] ata8: PATA max UDMA/100 cmd 0xc800 ctl 0xc480 bmdma 0xc408 > irq 17 > [ 5.757522] Driver 'sr' needs updating - please use bus_type methods > [ 5.760092] Driver 'sd' needs updating - please use bus_type methods > [ 5.760151] sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 > MB) > [ 5.760164] sd 2:0:0:0: [sda] Write Protect is off > [ 5.760165] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 5.760186] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, > doesn't support DPO or FUA > [ 5.760242] sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 > MB) > [ 5.760254] sd 2:0:0:0: [sda] Write Protect is off > [ 5.760256] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 5.760277] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, > doesn't support DPO or FUA > [ 5.760280] sda:sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw > xa/form2 cdda tray > [ 5.760949] Uniform CD-ROM driver Revision: 3.20 > [ 5.761003] sr 3:0:0:0: Attached scsi CD-ROM sr0 > [ 5.790158] sda1 sda2 < sda5 > > [ 5.820693] sd 2:0:0:0: [sda] Attached SCSI disk > [ 6.259095] PM: Starting manual resume from disk > [ 6.259098] PM: Resume from partition 254:1 > [ 6.259099] PM: Checking hibernation image. > [ 6.259463] PM: Resume from disk failed. > [ 6.310407] EXT3-fs: INFO: recovery required on readonly filesystem. > [ 6.310410] EXT3-fs: write access will be enabled during recovery. > [ 7.662578] kjournald starting. Commit interval 5 seconds > [ 7.662588] EXT3-fs: recovery complete. > [ 7.666326] EXT3-fs: mounted filesystem with ordered data mode. > [ 10.694728] udevd version 124 started > [ 11.012913] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > [ 11.016202] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 > [ 11.029092] Linux agpgart interface v0.103 > [ 11.067995] input: Power Button (FF) as > /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 > [ 11.113941] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> > IRQ 22 > [ 11.113964] HDA Intel 0000:00:1b.0: setting latency timer to 64 > [ 11.141304] ACPI: Power Button (FF) [PWRF] > [ 11.141405] input: Power Button (CM) as > /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 > [ 11.201935] hda_codec: Unknown model for ALC883, trying auto-probe from > BIOS... > [ 11.211328] ACPI: Power Button (CM) [PWRB] > [ 11.337142] parport_pc 00:07: reported by Plug and Play ACPI > [ 11.337186] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] > [ 11.512352] martian loaded - 20080617 > [ 11.512444] martian 0000:05:03.0: PCI INT A -> GSI 22 (level, low) -> IRQ > 22 > [ 11.512458] martian: added device 11c1:440 BaseAddress = 0xe400, > CommAddres = 0xec00, irq = 22 > [ 11.539726] ISDN subsystem Rev: > 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded > [ 11.586991] HiSax: Linux Driver for passive ISDN cards > [ 11.586994] HiSax: Version 3.5 (module) > [ 11.586996] HiSax: Layer1 Revision 2.46.2.5 > [ 11.586997] HiSax: Layer2 Revision 2.30.2.4 > [ 11.586999] HiSax: TeiMgr Revision 2.20.2.3 > [ 11.587000] HiSax: Layer3 Revision 2.22.2.3 > [ 11.587002] HiSax: LinkLayer Revision 2.59.2.4 > [ 11.833941] input: PC Speaker as /devices/platform/pcspkr/input/input3 > [ 13.052643] loop: module loaded > [ 13.061008] lp0: using parport0 (interrupt-driven). > [ 13.274338] Adding 9330680k swap on /dev/mapper/pst--server-swap_1. > Priority:-1 extents:1 across:9330680k > [ 13.660356] EXT3 FS on dm-0, internal journal > [ 14.207127] kjournald starting. Commit interval 5 seconds > [ 14.207583] EXT3 FS on sda5, internal journal > [ 14.207590] EXT3-fs: mounted filesystem with ordered data mode. > [ 14.627731] type=1505 audit(1239602264.659:2): operation="profile_load" > name="/usr/sbin/mysqld" name2="default" pid=3808 > [ 14.661588] type=1505 audit(1239602264.701:3): operation="profile_load" > name="/usr/sbin/named" name2="default" pid=3812 > [ 14.776797] ip_tables: (C) 2000-2006 Netfilter Core Team > [ 14.818371] r8169: eth0: link up > [ 14.818377] r8169: eth0: link up > [ 15.162579] NET: Registered protocol family 10 > [ 15.162940] lo: Disabled Privacy Extensions > [ 17.726122] type=1503 audit(1239602273.719:4): operation="capable" > name="sys_resource" pid=4231 profile="/usr/sbin/named" > [ 17.726287] type=1503 audit(1239602273.719:5): > operation="inode_permission" requested_mask="::r" denied_mask="::r" > fsuid=104 name="/proc/4230/net/if_inet6" pid=4231 profile="/usr/sbin/named" > [ 17.835005] dahdi: Telephony Interface Registered on major 196 > [ 17.835010] dahdi: Version: 2.1.0.4 > [ 17.928018] wctdm 0000:05:01.0: PCI INT A -> GSI 20 (level, low) -> IRQ > 20 > [ 17.928170] Freshmaker version: 71 > [ 17.928576] Freshmaker passed register test > [ 19.607009] Module 0: Installed -- AUTO FXS/DPO > [ 19.607116] Module 1: Not installed > [ 19.607221] Module 2: Not installed > [ 19.800351] Module 3: Installed -- AUTO FXO (FCC mode) > [ 19.810014] Found a Wildcard TDM: Wildcard TDM400P REV E/F (2 modules) > [ 19.903501] dahdi_transcode: Loaded. > [ 19.995780] INFO-xpp: revision trunk-r6056 MAX_XPDS=64 (8*8) > [ 19.995786] INFO-xpp: FEATURE: without BRISTUFF support > [ 19.995797] INFO-xpp: FEATURE: with PROTOCOL_DEBUG > [ 19.995846] INFO-xpp: FEATURE: with sync_tick() from DAHDI > [ 20.004413] INFO-xpp_usb: revision trunk-r6056 > [ 20.004486] usbcore: registered new interface driver xpp_usb > [ 20.069473] dahdi_echocan_mg2: Registered echo canceler 'MG2' > [ 20.070135] dahdi: Registered tone zone 0 (United States / North America) > [ 26.150007] eth0: no IPv6 routers present > [ 42.629796] Bridge firewalling registered > [ 42.630369] vnet0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. > [ 42.672409] vnet0: starting userspace STP failed, starting kernel STP > [ 42.936895] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) > [ 42.937037] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. > Plase use > [ 42.937039] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack > module option or > [ 42.937041] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. > [ 53.090008] vnet0: no IPv6 routers present > [ 3617.727939] type=1503 audit(1239605873.718:6): > operation="inode_permission" requested_mask="::r" denied_mask="::r" > fsuid=104 name="/proc/4230/net/if_inet6" pid=4232 profile="/usr/sbin/named" > [ 7217.727957] type=1503 audit(1239609473.719:7): > operation="inode_permission" requested_mask="::r" denied_mask="::r" > fsuid=104 name="/proc/4230/net/if_inet6" pid=4232 profile="/usr/sbin/named" > [10817.728034] type=1503 audit(1239613073.719:8): > operation="inode_permission" requested_mask="::r" denied_mask="::r" > fsuid=104 name="/proc/4230/net/if_inet6" pid=4232 profile="/usr/sbin/named" > [14417.728050] type=1503 audit(1239616673.718:9): > operation="inode_permission" requested_mask="::r" denied_mask="::r" > fsuid=104 name="/proc/4230/net/if_inet6" pid=4232 profile="/usr/sbin/named" > > Module Size Used by > ipt_MASQUERADE 10752 1 > iptable_nat 13448 1 > nf_nat 25368 2 ipt_MASQUERADE,iptable_nat > nf_conntrack_ipv4 21900 4 iptable_nat,nf_nat > xt_state 10112 1 > nf_conntrack 72032 5 > ipt_MASQUERADE,iptable_nat,nf_nat,nf_conntrack_ipv4,xt_state > ipt_REJECT 11136 2 > xt_tcpudp 11008 4 > bridge 56980 0 > stp 10628 1 bridge > dahdi_echocan_mg2 13960 0 > xpp_usb 23628 0 > xpp 155200 1 xpp_usb > wctc4xxp 46748 0 > dahdi_transcode 15244 1 wctc4xxp > wcb4xxp 43556 0 > wctdm 44492 2 > wcfxo 19104 0 > wctdm24xxp 105472 0 > wcte11xp 33568 0 > wct1xxp 22816 0 > wcte12xp 77408 0 > wct4xxp 238336 0 > dahdi 201896 17 > dahdi_echocan_mg2,xpp,dahdi_transcode,wcb4xxp,wctdm,wcfxo,wctdm24xxp,wcte11xp,wct1xxp,wcte12xp,wct4xxp > ipv6 263460 16 > iptable_filter 10752 1 > ip_tables 19600 2 iptable_nat,iptable_filter > x_tables 22916 6 > ipt_MASQUERADE,iptable_nat,xt_state,ipt_REJECT,xt_tcpudp,ip_tables > ac 12292 0 > lp 17156 0 > loop 23180 0 > psmouse 45200 0 > pcspkr 10624 0 > evdev 17696 2 > serio_raw 13444 0 > hisax 520964 0 > crc_ccitt 10112 2 dahdi,hisax > isdn 138464 1 hisax > martian_dev 32788 0 > slhc 14208 1 isdn > parport_pc 39460 1 > parport 42604 2 lp,parport_pc > snd_hda_intel 381360 0 > snd_pcm 83332 1 snd_hda_intel > snd_timer 29832 1 snd_pcm > snd 63268 3 snd_hda_intel,snd_pcm,snd_timer > button 14224 0 > soundcore 15328 1 snd > intel_agp 34116 0 > agpgart 42184 1 intel_agp > shpchp 38036 0 > pci_hotplug 35236 1 shpchp > snd_page_alloc 16264 2 snd_hda_intel,snd_pcm > ext3 132872 2 > jbd 55444 1 ext3 > mbcache 16004 1 ext3 > sd_mod 42264 3 > sr_mod 22212 0 > crc_t10dif 9984 1 sd_mod > cdrom 43040 1 sr_mod > pata_acpi 12160 0 > sg 39220 0 > pata_jmicron 11136 0 > ata_piix 24708 2 > ata_generic 12804 0 > ahci 37004 0 > libata 176032 5 > pata_acpi,pata_jmicron,ata_piix,ata_generic,ahci > r8169 36228 0 > scsi_mod 155212 4 sd_mod,sr_mod,sg,libata > dock 16656 1 libata > ehci_hcd 43916 0 > uhci_hcd 30864 0 > usbcore 149360 4 xpp_usb,ehci_hcd,uhci_hcd > dm_mirror 27008 0 > dm_log 17924 1 dm_mirror > dm_snapshot 26276 0 > dm_mod 63304 8 dm_mirror,dm_log,dm_snapshot > thermal 23708 0 > processor 42284 1 thermal > fan 12420 0 > fbcon 47392 0 > tileblit 10752 1 fbcon > font 16512 1 fbcon > bitblit 13824 1 fbcon > softcursor 9984 1 bitblit > fuse 60700 1 > >
