Stefano, If you chose the correct driver, the slamr-2.6.27-7-generic.tar.gz and followed the instructions given, all you get is "No Carrier", Do you have a line in wvdial.conf "Carrier Check = no"? in it? Also you could modify your wvdial.conf with Init strings like: [root@localhost ~]# cat /etc/wvdial.conf [Dialer Defaults] Init2 = ATQ0 V1 E1 S0=0 X3 &C1 &D2 +MS=90 >From the output of scanModem, there you could find a file called wvdial.txt that guides you better: $ cat Modem/DOCs/wvdial.txt and it will give some examples for you to try out. While you attempt to dialout, you may save the session using: ## If CONNECT is achieved but browsing fails, try activating the following line # Auto DNS = yes ## To make a logfile wvdial.out # wvdial 2>&1 | tee wvdial.out # # For some Internet providers, the following line is necessary # Stupid Mode = yes ## for other wvdial options, do "man wvdial" or see the documentation in ## /usr/share/doc/wvdial/ Report back if you have questions. Also please attach wvdial.out if somehow wvdial does not succeed so we can try to help you get connected. Regards, Antonio On Wed, Apr 8, 2009 at 6:54 PM, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote: > From http://linmodems.technion.ac.il/packages/smartlink/Ubuntu/ , > download the package slamr-2.6.27-7-generic.tar.gz > Under Linux, open a terminal and unpack with: > $ tar zxvf slamr*.tar.gz > Move into the unpacked folder > $ cd slamr-2.6.27-7-generic > Look around > $ ls > Run the > $ sudo ./setup > > Afterwards do: > $ slmodemd --help > $ slmodemd --countrylist &> Clist.txt > If not in the USA, look for your COUNTRY_NAME therein. > Do and edit with: > $ sudo gedit /etc/default/sl-modem-daemon > and therein replace the USA in the line: > SLMODEMD_COUNTRY=USA > This will provide for the correct Country setting in the automated: > slmodemd -c COUNTRY /dev/slamr0 > > Read the DOCs/Smartlink.txt and DOCs/YourSystem.txt > > MarvS > > On Wed, Apr 8, 2009 at 4:25 PM, ste <ste@xxxxxxxxxxxxxxxxx> wrote: >> Hello everybody, >> >> I've a problem with the modem configuration, wvdialconf finds the modem but >> I get "no carrier" message, both with wvdial and gnome-ppp. >> >> >> thanks for any help >> >> stefano >> >> >> -------------------------- System information ---------------------------- >> CPU=i686, Linux version 2.6.27-7-generic (buildd@rothera) (gcc version 4.3.2 >> (Ubuntu 4.3.2-1ubuntu10) ) #1 SMP Fri Oct 24 06:42:44 UTC 2008 >> scanModem update of: 2009_03_01 >> >> There are no blacklisted modem drivers in /etc/modprobe* files >> Potentially useful modem drivers now loaded are: >> slamr snd_hda_intel >> slamrTest= >> Attached USB devices are: >> ID 0c10:0000 If a cellphone is not detected, see >> http://ubuntuforums.org/archive/index.php/t-878554.html >> >> If a USB modem or cellphone is attached and was not detected, please >> provide available information in your request to discuss@xxxxxxxxxxxxx >> >> For candidate card in slot 01:09.0, firmware information and bootup >> diagnostics are: >> PCI slot PCI ID SubsystemID Name >> ---------- --------- --------- -------------- >> 01:09.0 2000:2800 122d:2800 Modem: Smart Link Ltd. SmartPCI2800 >> V.92 PCI Soft DFT >> >> Modem interrupt assignment and sharing: >> 19: 0 0 IO-APIC-fasteoi SL2800 >> --- Bootup diagnostics for card in PCI slot 01:09.0 ---- >> [ 0.492778] PCI: 0000:01:09.0 reg 10 32bit mmio: [bf000000, bfffffff] >> [ 0.492809] pci 0000:01:09.0: PME# supported from D3hot D3cold >> [ 0.492813] pci 0000:01:09.0: PME# disabled >> [ 2.145445] serial 0000:01:09.0: PCI INT A -> Link[LNKB] -> GSI 19 >> (level, low) -> IRQ 19 >> [ 2.145453] serial 0000:01:09.0: PCI INT A disabled >> [ 11.741749] slamr 0000:01:09.0: PCI INT A -> Link[LNKB] -> GSI 19 (level, >> low) -> IRQ 19 >> >> The PCI slot 01:09.0 of the modem card may be disabled early in >> a bootup process, but then enabled later. If modem drivers load >> but the modem is not responsive, read DOCs/Bootup.txt about possible fixes. >> Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx >> if help is needed. >> >> >> For candidate card in slot 00:05.0, firmware information and bootup >> diagnostics are: >> PCI slot PCI ID SubsystemID Name >> ---------- --------- --------- -------------- >> 00:05.0 10de:03f0 1043:8234 Audio device: nVidia Corporation MCP61 >> High Definition Audio >> >> Modem interrupt assignment and sharing: >> 22: 5 3655 IO-APIC-fasteoi ehci_hcd:usb2, HDA Intel >> --- Bootup diagnostics for card in PCI slot 00:05.0 ---- >> [ 0.492391] PCI: 0000:00:05.0 reg 10 32bit mmio: [ddef8000, ddefbfff] >> [ 0.492414] pci 0000:00:05.0: PME# supported from D3hot D3cold >> [ 0.492417] pci 0000:00:05.0: PME# disabled >> [ 1.752982] pci 0000:00:05.0: Enabling HT MSI Mapping >> [ 12.239628] HDA Intel 0000:00:05.0: PCI INT B -> Link[LAZA] -> GSI 22 >> (level, low) -> IRQ 22 >> [ 12.239647] HDA Intel 0000:00:05.0: setting latency timer to 64 >> >> The PCI slot 00:05.0 of the modem card may be disabled early in >> a bootup process, but then enabled later. If modem drivers load >> but the modem is not responsive, read DOCs/Bootup.txt about possible fixes. >> Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx >> if help is needed. >> >> >> >> ===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== >> The ALSA packages provide audio support and also drivers for some modems. >> ALSA diagnostics are written during bootup to /proc/asound/ folders. >> >> The ALSA verion is 1.0.17 >> The modem cards detected by "aplay -l" are: None >> >> >> The /proc/asound/pcm file reports: >> ----------------------- >> 00-01: AD198x Digital : AD198x Digital : playback 1 >> 00-00: AD198x Analog : AD198x Analog : playback 1 : capture 3 >> >> about /proc/asound/cards: >> ------------------------ >> 0 [NVidia ]: HDA-Intel - HDA NVidia >> HDA NVidia at 0xddef8000 irq 22 >> >> PCI slot 00:05.0 has a High Definition Audio Card >> The drivers are in the kernel modules tree at: >> /lib/modules/2.6.27-7-generic/kernel/sound/pci/hda/snd-hda-intel.ko >> UNEXPECTED HDA diagnostic outcome. >> === Finished firmware and bootup diagnostics, next deducing cogent software. >> === >> >> Predictive diagnostics for card in bus 01:09.0: >> Modem chipset detected on >> NAME="Modem: Smart Link Ltd. SmartPCI2800 V.92 PCI Soft DFT " >> CLASS=0703 >> PCIDEV=2000:2800 >> SUBSYS=122d:2800 >> IRQ=19 >> IDENT=slamr >> >> For candidate modem in: 01:09.0 >> 0703 Modem: Smart Link Ltd. SmartPCI2800 V.92 PCI Soft DFT >> Primary device ID: 2000:2800 >> Support type needed or chipset: slamr >> >> >> ----------------end Softmodem section -------------- >> The modem is supported by the Smartlink >> plus the slmodemd helper utility. Read the >> DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through >> guidance. >> >> >> From http://linmodems.technion.ac.il/packages/smartlink/Ubuntu/ , >> download the package slamr-2.6.27-7-generic.tar.gz >> Under Linux, open a terminal and unpack with: >> $ tar zxvf slamr*.tar.gz >> Move into the unpacked folder >> $ cd slamr-2.6.27-7-generic >> Look around >> $ ls >> Run the >> $ sudo ./setup >> >> Afterwards do: >> $ slmodemd --help >> $ slmodemd --countrylist &> Clist.txt >> If not in the USA, look for your COUNTRY_NAME therein. >> Do and edit with: >> $ sudo gedit /etc/default/sl-modem-daemon >> and therein replace the USA in the line: >> SLMODEMD_COUNTRY=USA >> This will provide for the correct Country setting in the automated: >> slmodemd -c COUNTRY /dev/slamr0 >> >> Read the DOCs/Smartlink.txt and DOCs/YourSystem.txt >> Writing DOCs/Smartlink.txt >> ============ end Smartlink section ===================== >> >> >> Predictive diagnostics for card in bus 00:05.0: >> Modem chipset not detected on >> NAME="Audio device: nVidia Corporation MCP61 High Definition Audio " >> CLASS=0403 >> PCIDEV=10de:03f0 >> SUBSYS=1043:8234 >> IRQ=22 >> HDA=10de:03f0 >> SOFT=10de:03f0.HDA >> >> >> High Definition Audio (HDA) cards MAY host a modem chip in their Subsystem, >> and many are supported by the ALSA audio+modem driver snd-hda-intel >> A modem was not detected on HDA card 10de:03f0. >> If another modem card is present, then most likely 10de:03f0 does not host a >> modem. >> If another modem card has not been detected, then possibilities are: >> 1) A Conexant modem chip is present on 10de:03f0, as Conexant chips >> are frequently not detectable by ALSA diagnostics >> 2) The modem may be of the older non-PCI Controller Chipset (hardware) >> type. >> Try detection with Root permission: >> sudo wvdialconf /etc/wvdial.conf >> >> For candidate modem in: 00:05.0 >> 0403 Audio device: nVidia Corporation MCP61 High Definition Audio >> Primary device ID: 10de:03f0 >> Subsystem PCI_id 1043:8234 >> Softmodem codec or chipset from diagnostics: >> from Archives: >> >> Support type needed or chipset: >> Support can likely be achieved through two mutually exclusive alternatives: >> 1) The hsfmodem software for Conexant chipset modems: Read DOCs/Conexant.txt >> The following ALSA alternative CANNOT work with Conexant modems. >> >> 2) An ALSA modem driver plus slmodemd. Read DOCs/Smartlink.txt for details, >> and >> to test get the package SLMODEMD.gcc4.3.tar.gz from: >> http://linmodems.technion.ac.il/packages/smartlink/ >> >> ----------------end Softmodem section -------------- >> >> Completed candidate modem analyses. >> >> The base of the UDEV device file system is: /dev/.udev >> >> Versions adequately match for the compiler installed: 4.3.2 >> and the compiler used in kernel assembly: 4.3.2 >> >> The patch utility is needed and is needed for compiling ALSA drivers, and >> possibly others. >> >> >> Minimal compiling resources appear complete: >> make utility - /usr/bin/make >> Compiler version 4.3 >> linuc_headers base folder /lib/modules/2.6.27-7-generic/build >> >> However some compilations and executable functions may need additional >> files, >> in the FileNames.h (so called kernel "h"eaders) collection installed in >> /usr/include/ . >> For martian_modem, additional required packages are needed. The also >> required headers of package libc6 are commonly installed by default. >> Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev >> packages, for kernels 2.6.24 and later versions. >> In not included on your install CD, search for them at >> http://packages.ubuntu.com >> or comparable Repository for other Linux distros. >> When compiling ALSA drivers, the utility "patch" will also be needed. >> >> >> >> >> If a driver compilation fails, with message including some lack of some >> FileName.h (stdio.h for example), then >> Some additional kernel-header files need installation to /usr/include. The >> minimal additional packages are libc6-dev >> and any of its dependents, under Ubuntu linux-libc-dev >> >> If an alternate ethernet connection is available, >> $ apt-get update >> $ apt-get -s install linux-kernel-devel >> will install needed packages. >> For Debian/Ubuntu related distributions, run the following command to >> display the needed package list: >> >> Otherwise packages have to be found through http://packages.ubuntu.com >> Once downloaded and transferred into a Linux partition, >> they can be installed alltogether with: >> $ sudo dpkg -i *.deb >> >> Checking settings of: /etc/ppp/options >> asyncmap 0 >> noauth >> crtscts >> lock >> hide-password >> modem >> proxyarp >> lcp-echo-interval 30 >> lcp-echo-failure 4 >> noipx >> >> In case of a message like: >> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied >> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html >> >> Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 >> Which can interfere with Browser naviagation. >> >> Don't worry about the following, it is for experts should trouble shooting >> be necessary. >> ========================================================== >> >> Checking for modem support lines: >> -------------------------------------- >> /device/modem symbolic link: slmodemd created symbolic link /dev/ttySL0: >> Within /etc/udev/ files: >> >> Within /etc/modprobe.conf files: >> /etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to >> blacklist unwanted modem drivers >> /etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem >> /etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem >> /etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2 >> /etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2 >> Within any ancient /etc/devfs files: >> >> Within ancient kernel 2.4.n /etc/module.conf files: >> >> --------- end modem support lines -------- >> >> >> -- >> ********************************************************* >> * www.vogliaditerra.com/ * >> * Photoblog: www.vogliaditerra.com/photoblog * >> * www.youtube.com/user/contadinoste * >> * Skype: contadinoste * >> ********************************************************* >> >> >
