On Fri, Mar 27, 2009 at 01:41:47PM -0400, Marvin Stodolsky wrote: > Tiago, > > Re:[ 12.909816] ACPI: PCI interrupt for device 0000:01:06.0 disabled > Among the various processes/hardware of the System, the Linux kernel > assigns a low priority to modem function. So when there is some > resource conflict: > PCI interrupt for device 0000:01:06.0 disabled (the modem) > Read DOCs/Bootup.txt about possible fixes. Ok, thanks. Forgot to say that I already tested pci=routeirq and pollirq in kernel command line, without differences. And I do not have easy physical access to this machine, so I have not played with anything in the bios. > Also do: > $ cat /proc/interrupts >> tiago.txt > $ dmesg >> tiago.txt > > and send us the tiago.txt. We will help you identify processes which > might be shutdown to enable more resources for modem usage. It is attached. Further help will be welcome. Thanks, Tiago.
CPU0 0: 68 IO-APIC-edge timer 1: 2 IO-APIC-edge i8042 4: 2 IO-APIC-edge 6: 5 IO-APIC-edge floppy 7: 1 IO-APIC-edge parport0 8: 2 IO-APIC-edge rtc0 9: 0 IO-APIC-fasteoi acpi 12: 4 IO-APIC-edge i8042 14: 0 IO-APIC-edge ide0 20: 19847 IO-APIC-fasteoi sata_nv 22: 970732 IO-APIC-fasteoi ehci_hcd:usb2, nvidia 23: 98 IO-APIC-fasteoi ohci_hcd:usb1, HDA Intel 221: 1619685 PCI-MSI-edge eth2 NMI: 0 Non-maskable interrupts LOC: 155412 Local timer interrupts RES: 0 Rescheduling interrupts CAL: 0 function call interrupts TLB: 0 TLB shootdowns TRM: 0 Thermal event interrupts SPU: 0 Spurious interrupts ERR: 1 MIS: 0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.26-1-686 (Debian 2.6.26-13lenny2) (dannf@xxxxxxxxxx) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Fri Mar 13 18:08:45 UTC 2009 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001bee0000 (usable) [ 0.000000] BIOS-e820: 000000001bee0000 - 000000001bee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001bee3000 - 000000001bef0000 (ACPI data) [ 0.000000] BIOS-e820: 000000001bef0000 - 000000001bf00000 (reserved) [ 0.000000] BIOS-e820: 000000001c000000 - 0000000020000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 446MB LOWMEM available. [ 0.000000] found SMP MP-table at [c00f3a00] 000f3a00 [ 0.000000] Entering add_active_range(0, 0, 114400) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 114400 [ 0.000000] HighMem 114400 -> 114400 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 114400 [ 0.000000] On node 0 totalpages: 114400 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 862 pages used for memmap [ 0.000000] Normal zone: 109442 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.2 present. [ 0.000000] ACPI: RSDP 000F7A10, 0014 (r0 Nvidia) [ 0.000000] ACPI: RSDT 1BEE3040, 0034 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP 1BEE30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI Warning (tbfadt-0442): Optional field "Pm2ControlBlock" has zero address or length: 0000000000000000/1 [20080321] [ 0.000000] ACPI: DSDT 1BEE3180, 6378 (r1 NVIDIA AWRDACPI 1000 MSFT 100000E) [ 0.000000] ACPI: FACS 1BEE0000, 0040 [ 0.000000] ACPI: _HPT 1BEE9600, 0038 (r1 Nvidia AWRDACPI 42302E31 AWRD 98) [ 0.000000] ACPI: MCFG 1BEE9680, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: APIC 1BEE9540, 007C (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:d0000000) [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 2 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113506 [ 0.000000] Kernel command line: root=/dev/sda2 ro pollirq [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Detected 1607.400 MHz processor. [ 0.004000] spurious 8259A interrupt: IRQ7. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.004000] Memory: 442692k/457600k available (1769k kernel code, 14360k reserved, 752k data, 244k init, 0k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB) [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.004000] vmalloc : 0xdc800000 - 0xff7fe000 ( 559 MB) [ 0.004000] lowmem : 0xc0000000 - 0xdbee0000 ( 446 MB) [ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB) [ 0.004000] .data : 0xc02ba4d3 - 0xc0376620 ( 752 kB) [ 0.004000] .text : 0xc0100000 - 0xc02ba4d3 (1769 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.084152] Calibrating delay using timer specific routine.. 3218.83 BogoMIPS (lpj=6437675) [ 0.084273] Security Framework initialized [ 0.084318] SELinux: Disabled at boot. [ 0.084361] Capability LSM initialized [ 0.084418] Mount-cache hash table entries: 512 [ 0.084600] Initializing cgroup subsys ns [ 0.084645] Initializing cgroup subsys cpuacct [ 0.084691] Initializing cgroup subsys devices [ 0.084751] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.084799] CPU: L2 Cache: 256K (64 bytes/line) [ 0.084844] Intel machine check architecture supported. [ 0.084889] Intel machine check reporting enabled on CPU#0. [ 0.084942] Checking 'hlt' instruction... OK. [ 0.100420] SMP alternatives: switching to UP code [ 0.107719] ACPI: Core revision 20080321 [ 0.118891] ENABLING IO-APIC IRQs [ 0.119180] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.162833] CPU0: AMD Sempron(tm) Processor 3000+ stepping 02 [ 0.164010] Brought up 1 CPUs [ 0.164010] Total of 1 processors activated (3218.83 BogoMIPS). [ 0.164010] CPU0 attaching sched-domain: [ 0.164010] domain 0: span 0 [ 0.164010] groups: 0 [ 0.164010] net_namespace: 660 bytes [ 0.164010] Booting paravirtualized kernel on bare hardware [ 0.164010] NET: Registered protocol family 16 [ 0.164010] ACPI: bus type pci registered [ 0.164010] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 [ 0.164010] PCI: MCFG area at f0000000 reserved in E820 [ 0.164010] PCI: Using MMCONFIG for extended config space [ 0.164010] PCI: Using configuration type 1 for base access [ 0.164010] Setting up standard PCI resources [ 0.168010] ACPI: EC: Look up EC in DSDT [ 0.176011] ACPI: Interpreter enabled [ 0.176011] ACPI: (supports S0 S1 S3 S4 S5) [ 0.176011] ACPI: Using IOAPIC for interrupt routing [ 0.187334] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.188156] PCI: Transparent bridge - 0000:00:04.0 [ 0.188293] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.188677] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.274039] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.274567] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 *10 11 14 15) [ 0.275029] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.275550] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.276078] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.276598] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.277118] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.277636] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.278157] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 *10 11 14 15) [ 0.278616] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.279135] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15) [ 0.279596] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15) [ 0.280070] ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15) [ 0.280531] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.281051] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15) [ 0.281518] ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15) [ 0.281982] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.282502] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15) [ 0.282966] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.283535] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. [ 0.283948] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0 [ 0.284337] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. [ 0.284748] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. [ 0.285158] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. [ 0.285569] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. [ 0.285980] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled. [ 0.286392] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled. [ 0.286804] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0 [ 0.287261] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 [ 0.287718] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 0.288181] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. [ 0.288663] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 [ 0.289120] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 0.289575] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 [ 0.290032] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 0.290513] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 0.290994] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 0.291451] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. [ 0.291882] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.291958] pnp: PnP ACPI init [ 0.292008] ACPI: bus type pnp registered [ 0.299777] pnp: PnP ACPI: found 12 devices [ 0.299824] ACPI: ACPI bus type pnp unregistered [ 0.299869] PnPBIOS: Disabled by ACPI PNP [ 0.300165] PCI: Using ACPI for IRQ routing [ 0.300413] ACPI: RTC can wake from S4 [ 0.300480] system 00:01: ioport range 0x1000-0x107f has been reserved [ 0.300527] system 00:01: ioport range 0x1080-0x10ff has been reserved [ 0.300574] system 00:01: ioport range 0x1400-0x147f has been reserved [ 0.300621] system 00:01: ioport range 0x1480-0x14ff has been reserved [ 0.300668] system 00:01: ioport range 0x1800-0x187f has been reserved [ 0.300715] system 00:01: ioport range 0x1880-0x18ff has been reserved [ 0.300764] system 00:01: iomem range 0xfec80000-0xfecbffff could not be reserved [ 0.300824] system 00:01: iomem range 0xfefe0000-0xfefe01ff could not be reserved [ 0.303790] system 00:01: iomem range 0xfefe1000-0xfefe10ff could not be reserved [ 0.303851] system 00:01: iomem range 0x1c000000-0x1fffffff could not be reserved [ 0.303916] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 0.303963] system 00:02: ioport range 0x800-0x87f has been reserved [ 0.304010] system 00:02: ioport range 0x290-0x297 has been reserved [ 0.304071] system 00:0a: iomem range 0xf0000000-0xf3ffffff could not be reserved [ 0.304137] system 00:0b: iomem range 0xf0000-0xfffff could not be reserved [ 0.304186] system 00:0b: iomem range 0xfeff0000-0xfeff00ff could not be reserved [ 0.304246] system 00:0b: iomem range 0x1bee0000-0x1befffff could not be reserved [ 0.304307] system 00:0b: iomem range 0xffff0000-0xffffffff could not be reserved [ 0.304366] system 00:0b: iomem range 0x0-0x9ffff could not be reserved [ 0.304414] system 00:0b: iomem range 0x100000-0x1bedffff could not be reserved [ 0.304474] system 00:0b: iomem range 0x1bf00000-0x1fefffff could not be reserved [ 0.304534] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.304594] system 00:0b: iomem range 0xfee00000-0xfeefffff could not be reserved [ 0.304654] system 00:0b: iomem range 0xfefff000-0xfeffffff could not be reserved [ 0.304715] system 00:0b: iomem range 0xfff80000-0xfff80fff could not be reserved [ 0.304775] system 00:0b: iomem range 0xfff90000-0xfffbffff could not be reserved [ 0.304835] system 00:0b: iomem range 0xfffed000-0xfffeffff could not be reserved [ 0.335313] PCI: Bridge: 0000:00:04.0 [ 0.335356] IO window: c000-cfff [ 0.335399] MEM window: 0xfdf00000-0xfdffffff [ 0.335443] PREFETCH window: 0x00000000fda00000-0x00000000fdafffff [ 0.335491] PCI: Bridge: 0000:00:0b.0 [ 0.335532] IO window: b000-bfff [ 0.335574] MEM window: 0xfde00000-0xfdefffff [ 0.335618] PREFETCH window: 0x00000000fdd00000-0x00000000fddfffff [ 0.335665] PCI: Bridge: 0000:00:0c.0 [ 0.335707] IO window: a000-afff [ 0.335749] MEM window: 0xfdc00000-0xfdcfffff [ 0.335792] PREFETCH window: 0x00000000fdb00000-0x00000000fdbfffff [ 0.335847] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 0.335860] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 0.335868] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 0.335902] NET: Registered protocol family 2 [ 0.336037] Switched to high resolution mode on CPU 0 [ 0.336068] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.336374] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.336536] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 0.336685] TCP: Hash tables configured (established 16384 bind 16384) [ 0.336732] TCP reno registered [ 0.336900] NET: Registered protocol family 1 [ 0.337069] checking if image is initramfs... it is [ 0.999442] Freeing initrd memory: 7032k freed [ 1.000304] audit: initializing netlink socket (disabled) [ 1.000361] type=2000 audit(1238150920.000:1): initialized [ 1.000549] Total HugeTLB memory allocated, 0 [ 1.000685] VFS: Disk quotas dquot_6.5.1 [ 1.000759] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.000841] msgmni has been set to 878 [ 1.001020] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.001081] io scheduler noop registered [ 1.001123] io scheduler anticipatory registered [ 1.001166] io scheduler deadline registered [ 1.001220] io scheduler cfq registered (default) [ 1.001292] pci 0000:00:00.0: Enabling HT MSI Mapping [ 1.017621] pci 0000:00:04.0: Enabling HT MSI Mapping [ 1.017680] pci 0000:00:05.0: Enabling HT MSI Mapping [ 1.017751] pci 0000:00:07.0: Enabling HT MSI Mapping [ 1.017808] pci 0000:00:08.0: Enabling HT MSI Mapping [ 1.017866] pci 0000:00:0b.0: Enabling HT MSI Mapping [ 1.017924] pci 0000:00:0c.0: Enabling HT MSI Mapping [ 1.017982] pci 0000:00:0d.0: Boot video device [ 1.018087] PCI: Setting latency timer of device 0000:00:0b.0 to 64 [ 1.018114] assign_interrupt_mode Found MSI capability [ 1.018179] Allocate Port Service[0000:00:0b.0:pcie00] [ 1.018227] Allocate Port Service[0000:00:0b.0:pcie03] [ 1.018300] PCI: Setting latency timer of device 0000:00:0c.0 to 64 [ 1.018326] assign_interrupt_mode Found MSI capability [ 1.018386] Allocate Port Service[0000:00:0c.0:pcie00] [ 1.018432] Allocate Port Service[0000:00:0c.0:pcie03] [ 1.018759] isapnp: Scanning for PnP cards... [ 1.371895] isapnp: No Plug & Play device found [ 1.373350] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 1.373541] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.374025] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.374655] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 [ 1.374708] ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17 [ 1.374994] 0000:01:06.0: ttyS1 at I/O 0xcc08 (irq = 17) is a 16450 [ 1.375150] 0000:01:06.0: ttyS2 at I/O 0xcc10 (irq = 17) is a 8250 [ 1.375304] 0000:01:06.0: ttyS3 at I/O 0xcc18 (irq = 17) is a 16450 [ 1.375395] Couldn't register serial port 0000:01:06.0: -28 [ 1.377036] brd: module loaded [ 1.377245] PNP: No PS/2 controller found. Probing ports directly. [ 1.377683] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.377732] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.377946] mice: PS/2 mouse device common for all mice [ 1.378141] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.378210] rtc0: alarms up to one year, y3k [ 1.378291] cpuidle: using governor ladder [ 1.378334] cpuidle: using governor menu [ 1.378379] No iBFT detected. [ 1.378986] TCP cubic registered [ 1.379028] NET: Registered protocol family 17 [ 1.379075] Using IPI No-Shortcut mode [ 1.379249] registered taskstats version 1 [ 1.379449] rtc_cmos 00:04: setting system clock to 2009-03-27 10:48:41 UTC (1238150921) [ 1.379690] Freeing unused kernel memory: 244k freed [ 1.497017] ACPI: PNP0C0B:00 is registered as cooling_device0 [ 1.497082] ACPI: Fan [FAN] (on) [ 1.503645] ACPI: ACPI0007:00 is registered as cooling_device1 [ 1.505923] ACPI: LNXTHERM:01 is registered as thermal_zone0 [ 1.506247] ACPI: Thermal Zone [THRM] (40 C) [ 2.213011] usbcore: registered new interface driver usbfs [ 2.213088] usbcore: registered new interface driver hub [ 2.213185] usbcore: registered new device driver usb [ 2.214459] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.214933] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23 [ 2.214988] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23 [ 2.215107] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 2.215111] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 2.215296] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 2.215374] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000 [ 2.246048] No dock devices found. [ 2.263445] SCSI subsystem initialized [ 2.274355] usb usb1: configuration #1 chosen from 1 choice [ 2.274436] hub 1-0:1.0: USB hub found [ 2.274489] hub 1-0:1.0: 8 ports detected [ 2.277577] libata version 3.00 loaded. [ 2.376190] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.376242] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.376302] usb usb1: Product: OHCI Host Controller [ 2.376345] usb usb1: Manufacturer: Linux 2.6.26-1-686 ohci_hcd [ 2.376390] usb usb1: SerialNumber: 0000:00:02.0 [ 2.377171] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 [ 2.377223] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 22 [ 2.377342] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 2.377346] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 2.377414] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 [ 2.377502] ehci_hcd 0000:00:02.1: debug port 1 [ 2.377547] PCI: cache line size of 64 is not supported by device 0000:00:02.1 [ 2.377563] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000 [ 2.388049] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 2.388206] usb usb2: configuration #1 chosen from 1 choice [ 2.388283] hub 2-0:1.0: USB hub found [ 2.388332] hub 2-0:1.0: 8 ports detected [ 2.492166] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.492217] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.492276] usb usb2: Product: EHCI Host Controller [ 2.492320] usb usb2: Manufacturer: Linux 2.6.26-1-686 ehci_hcd [ 2.492365] usb usb2: SerialNumber: 0000:00:02.1 [ 2.492644] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 2.493159] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21 [ 2.493212] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APCH] -> GSI 21 (level, low) -> IRQ 21 [ 2.493321] PCI: Setting latency timer of device 0000:00:07.0 to 64 [ 2.517246] Floppy drive(s): fd0 is 1.44M [ 2.535714] FDC 0 is a post-1991 82077 [ 3.012611] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x50ef @ 1, addr 04:4b:80:80:80:03 [ 3.012677] forcedeth 0000:00:07.0: highdma pwrctl mgmt timirq lnktim msi desc-v3 [ 3.012809] sata_nv 0000:00:08.0: version 3.5 [ 3.013262] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20 [ 3.013314] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 20 [ 3.013468] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 3.013553] scsi0 : sata_nv [ 3.013704] scsi1 : sata_nv [ 3.013906] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 20 [ 3.013954] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 20 [ 3.488037] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.496230] ata1.00: ATA-7: SAMSUNG HD080HJ, ZH100-47, max UDMA7 [ 3.496277] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 3.528228] ata1.00: configured for UDMA/133 [ 3.858292] ata2: SATA link down (SStatus 0 SControl 300) [ 3.858447] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD080HJ ZH10 PQ: 0 ANSI: 5 [ 3.871783] Uniform Multi-Platform E-IDE driver [ 3.871834] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 3.874891] NFORCE-MCP61: 0000:00:06.0 (rev a2) UDMA133 controller [ 3.874943] NFORCE-MCP61: IDE controller (0x10de:0x03ec rev 0xa2) at PCI slot 0000:00:06.0 [ 3.875024] NFORCE-MCP61: not 100% native mode: will probe irqs later [ 3.875076] NFORCE-MCP61: IDE port disabled [ 3.875121] ide0: BM-DMA at 0xf000-0xf007 [ 3.875167] Probing IDE interface ide0... [ 3.900282] udev: renamed network interface eth0 to eth2 [ 3.946264] Driver 'sd' needs updating - please use bus_type methods [ 3.946435] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 3.946506] sd 0:0:0:0: [sda] Write Protect is off [ 3.946551] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.946593] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.946724] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 3.946792] sd 0:0:0:0: [sda] Write Protect is off [ 3.946836] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.946878] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.946941] sda: sda1 sda2 sda3 sda4 < sda5 > [ 3.972980] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.440080] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 4.506909] PM: Starting manual resume from disk [ 4.544012] kjournald starting. Commit interval 5 seconds [ 4.544012] EXT3-fs: mounted filesystem with ordered data mode. [ 6.533218] udevd version 125 started [ 7.635400] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00 [ 7.635478] i2c-adapter i2c-1: nForce2 SMBus adapter at 0xf400 [ 8.083554] input: Power Button (FF) as /class/input/input0 [ 8.092060] ACPI: Power Button (FF) [PWRF] [ 8.092211] input: Power Button (CM) as /class/input/input1 [ 8.108663] ACPI: Power Button (CM) [PWRB] [ 9.340654] input: PC Speaker as /class/input/input2 [ 9.743311] parport_pc 00:09: reported by Plug and Play ACPI [ 9.743410] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] [ 9.960425] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23 [ 9.960476] ACPI: PCI Interrupt 0000:00:05.0[B] -> Link [AAZA] -> GSI 23 (level, low) -> IRQ 23 [ 9.960603] PCI: Setting latency timer of device 0000:00:05.0 to 64 [ 11.111613] Adding 1365516k swap on /dev/sda3. Priority:-1 extents:1 across:1365516k [ 11.415212] EXT3 FS on sda2, internal journal [ 11.620168] loop: module loaded [ 11.652458] Linux agpgart interface v0.103 [ 11.831266] nvidia: module license 'NVIDIA' taints kernel. [ 12.085880] ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 22 [ 12.085932] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [AIGP] -> GSI 22 (level, low) -> IRQ 22 [ 12.086044] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 12.086330] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.09 Wed Jun 4 23:43:17 PDT 2008 [ 12.116481] device 1057:3052 is grabbed by driver serial: try to release [ 12.116481] ACPI: PCI interrupt for device 0000:01:06.0 disabled [ 12.138421] slamr: SmartLink AMRMO modem. [ 12.138507] slamr: probe 1057:3052 SL1900 card... [ 12.138569] ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17 [ 12.138693] PCI: Setting latency timer of device 0000:01:06.0 to 64 [ 12.138727] slamr: cannot init card. [ 12.138787] ACPI: PCI interrupt for device 0000:01:06.0 disabled [ 12.223138] device-mapper: uevent: version 1.0.3 [ 12.224623] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@xxxxxxxxxx [ 12.752109] kjournald starting. Commit interval 5 seconds [ 12.752109] EXT3 FS on sda5, internal journal [ 12.752109] EXT3-fs: mounted filesystem with ordered data mode. [ 13.495615] eth2: no link during initialization. [ 14.100014] eth2: link up. [ 14.295286] NET: Registered protocol family 10 [ 14.295903] lo: Disabled Privacy Extensions [ 14.988011] eth2: link down. [ 16.881252] eth2: link up. [ 17.672457] eth2: link down. [ 19.342110] eth2: link up. [ 19.685554] eth2: link down. [ 21.331906] eth2: link up. [ 22.118217] eth2: link down. [ 23.874034] eth2: link up. [ 24.964019] eth2: no IPv6 routers present [ 27.957448] lp0: using parport0 (interrupt-driven). [ 27.984106] ppdev: user-space parallel port driver [ 33.567512] Bluetooth: Core ver 2.11 [ 33.597741] NET: Registered protocol family 31 [ 33.597792] Bluetooth: HCI device and connection manager initialized [ 33.597840] Bluetooth: HCI socket layer initialized [ 33.648864] Bluetooth: L2CAP ver 2.9 [ 33.648914] Bluetooth: L2CAP socket layer initialized [ 33.734869] Bluetooth: RFCOMM socket layer initialized [ 33.734933] Bluetooth: RFCOMM TTY layer initialized [ 33.734977] Bluetooth: RFCOMM ver 1.8
