help me

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



hi

i am jawdat kour from syria
i have  an

acer aspire 5315 -  laptop
openSUSE 11.0 (i586) - Kernel  kernel 2.6.25.5-1.1-default     operating system

and i need to modem driver for it  and how to install.
scanmodem result is attatched with this.

thanx
 Only plain text email is forwarded by the  Discuss@xxxxxxxxxxxxx List Server,
 as HTML can contain viruses. Use as the email Subject Line:
           YourName, YourCountry 
Welcome to openSUSE 11.0 (i586) - Kernel  kernel 2.6.25.5-1.1-default 
 With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
 YourCountry will enable Country specific guidance. Linux experts in YourCountry 
 can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
 So in a day, also check the Archived responses at http://www.linmodems.org 
--------------------------  System information ----------------------------
CPU=i686,  
Welcome to openSUSE 11.0 (i586) - Kernel 
Linux version 2.6.25.5-1.1-default (geeko@buildhost) (gcc version 4.3.1 20080507 (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #1 SMP 2008-06-07 01:55:22 +0200
 scanModem update of:  2008_08_26

 There are no blacklisted modem drivers in /etc/modprobe*  files 
Attached USB devices are:
 ID 15ca:00c3 Textech International Ltd. Mini Optical Mouse
 ID 1d6b:0001 Linux Foundation 1.1 root hub
 ID 1d6b:0001 Linux Foundation 1.1 root hub
 ID 1d6b:0001 Linux Foundation 1.1 root hub
 ID 1d6b:0001 Linux Foundation 1.1 root hub
 ID 1d6b:0001 Linux Foundation 1.1 root hub
 ID 5986:0102 Acer, Inc Crystal Eye webcam
 ID 1d6b:0002 Linux Foundation 2.0 root hub
 ID 1d6b:0002 Linux Foundation 2.0 root hub

USB modems not recognized

For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
 PCI slot	PCI ID		SubsystemID	Name
 ----------	---------	---------	--------------
 00:1b.0	8086:284b	1025:0136	Audio device: Intel Corporation 82801H 

 Modem interrupt assignment and sharing: 
 22:        734   IO-APIC-fasteoi   HDA Intel
 --- Bootup diagnostics for card in PCI slot 00:1b.0 ----
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1b.0 to 64


===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== 
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.

The ALSA verion is 1.0.16
The modem cards detected by "aplay -l"  are: None


The /proc/asound/pcm file reports:
-----------------------
00-00: ALC268 Analog : ALC268 Analog : playback 1 : capture 1

about /proc/asound/cards:
------------------------
 0 [Intel          ]: HDA-Intel - HDA Intel
                      HDA Intel at 0x58300000 irq 22

 PCI slot 00:1b.0 has a High Definition Audio Card
 The drivers are in the kernel modules tree at:
 /lib/modules/2.6.25.5-1.1-default/kernel/sound/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.25.5-1.1-pae/kernel/sound/pci/hda/snd-hda-intel.ko
 The modem codec file for the HDA card is: /proc/asound/card0/codec#1
--------------------------------------------------------
Codec: Conexant ID 2c06
Address: 1
Vendor Id: 0x14f12c06
Subsystem Id: 0x10250136
Revision Id: 0x100000
Modem Function Group: 0x2

 The audio card hosts a softmodem chip:  0x14f12c06

 14f1 is the Conexant Vendor ID, and 0x14f12c06 a softmodem chipset.
 Get a hsfmodem package through http://www.linuxant.com

If not a Conexant modem, the driver hsfmodem-drivers with its dependent drivers:

----------
provide audio + modem support with the modem chip residing on the subsystem.
Any particular card can host any one of several soft modem chips. 

=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

Predictive  diagnostics for card in bus 00:1b.0:
	Modem chipset  detected on
NAME="Audio device: Intel Corporation 82801H "
CLASS=0403
PCIDEV=8086:284b
SUBSYS=1025:0136
IRQ=22
HDA=8086:284b
SOFT=8086:284b.HDA
CHIP=0x14f12c06
IDENT=hsfmodem
Driver=hsfmodem-drivers

 For candidate modem in:  00:1b.0
   0403 Audio device: Intel Corporation 82801H 
      Primary device ID:  8086:284b
    Subsystem PCI_id  1025:0136 
    Softmodem codec or chipset from diagnostics: 0x14f12c06
                               from    Archives: 
                        The HDA card softmodem chip is 0x14f12c06
      

Support type needed or chipset:	hsfmodem


Writing DOCs/Intel.txt

For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt


Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find the
hsfmodem package matching your System. For several Linux distros, there are
precompiled drivers matched to specific kernels. These have within the FileName,
your KernelVersion:	2.6.25.5_1.1_default
They can be found through http://www.linuxant.com/drivers/hsf/full/downloads.php 
A more precise location may be given a few paragraphs below.
If an EXACT Match with your your KernelVersion is not found, one of the 
"Generic packages with source" near the bottom of the page must be used.
Downloaded packages must be moved into the Linux partition (home folder is OK)
and unzipped with:
	unzip hsf*.zip
The installation command for a .deb suffic packages is, with root/adm permission:
   dpkg -i hsf*.deb
while for .rpm suffix it is, with:
  rpm -i hsf*.rpm

Support for Conexant chips hosted on High Definition Audio cards may require
installation of additional packages, one of the alsa-driver-linuxant packages
on  http://www.linuxant.com/alsa-driver/  At the same time download the 
alsa-driver-1.0.17-1.patch , in case it prove to be later needed. During the
hsfmodem install, there will be a message if there is necessary installation of
alsa-driver-linuxant

The installation command for a .deb suffic packages is, with root/adm permission:
   alsa* -i hsf*.deb
while for .rpm suffix it is, with:
  rpm -i hsf*.rpm

There may a message that "Dependencies" are not satisfied.  In this case the Ubuntu/Debian packages to be installed are linux-libc-dev & libc6-dev. Package
names may be different for other Linuxes. If not on your install CD, these
packages can be searched for at http://packages.ubuntu.com.  After download,
they can be coinstalled with:
	 dpkg -i li*.deb
Again try the alsa-driver-linuxant

There may be a message that the patch must be applied.  In this case get the
ftp://ftp.alsa-project.org/pub/driver/alsa-driver-1.0.17.tar.bz2 
Under Linux, this package is unpacked with:
$ tar jxf alsa*.tar.bz2
Next the patch is applied with:
$ patch -p0 < alsa-driver-1.0.17-1.patch

See http://linmodems.technion.ac.il/bigarch/archive-eighth/msg00838.html
for details on compiling and installing replacement snd-hda-intel + its
dependent drivers.
After the installation is completed, rerun the hsfmodem installation.
Reboot and try to detect the modem with Root permission:
	 wvdialconf  /etc/wvdial.conf

 Start at  http://www.linuxant.com/drivers/hsf/full for
 eventually download of a hsfmodem-7.68.00.12full_k.???.zip package
 with ??? the package type (deb, rpm, tar etc)
 These packages have compiled drivers but will also compile a driver, 
 if there is a mismatch between the resident kernel and provided driver.
 The generic hsfmodem-7.68.00.12full.tar.gz package only provides compiling support

 Read DOCs/Conexant.txt

Writing DOCs/Conexant.txt


 Completed candidate modem analyses.

 The base of the UDEV device file system is: /dev/.udev

 The kernel was compiled with gcc version 4.3.1 and a compiler is not installed

 linux-headers-2.6.25.5-1.1-default resources needed for compiling are not manifestly ready!

 If compiling is necessary packages must be installed, providing:
	gcc-4.3 make kernel-source-2.6.25.5-1.1-default


If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb


Checking pppd properties:
	-rwxr-xr-x 1 root dialout 304644 2008-06-07 00:21 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
    http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
	$ su - root  (not for Ubuntu)
         chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
	 chmod a+x /usr/sbin/pppd

Checking settings of:	/etc/ppp/options
noipdefault
noauth
crtscts
lock
modem
asyncmap 0
nodetach
lcp-echo-interval 30
lcp-echo-failure 4
lcp-max-configure 60
lcp-restart 2
idle 600
noipx
file /etc/ppp/filters

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.

 Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================

 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:   
slmodemd created symbolic link /dev/ttySL0:  
     Within /etc/udev/ files:
/etc/udev/rules.d/77-network.rules:SUBSYSTEM=="net", ENV{INTERFACE}=="ppp*|ippp*|isdn*|plip*|lo*|irda*|dummy*|ipsec*|tun*|tap*|bond*|vlan*|modem*|dsl*", GOTO="skip_ifup"
/etc/udev/rules.d/50-udev-default.rules:KERNEL=="mwave",		NAME="modems/mwave", GROUP="uucp"
     Within /etc/modprobe.conf files:
/etc/modprobe.conf:# Linux ACP modem (Mwave)
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------


[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux