Thank's for helping with this, and let me know if you need more info.
Timraak@xxxxxxxxxxx
-------------------------- System information ----------------------------
CPU=i686,
Linux version 2.6.24-19-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Jun 18 14:43:41 UTC 2008
scanModem update of: 2009_02_04
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
Attached USB devices are:
ID 0ea0:2168 Ours Technology, Inc. Transcend JetFlash 2.0 / Astone USB Drive
ID 045e:00e1 Microsoft Corp. Wireless Laser Mouse 6000 Reciever
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx
For candidate card in slot 00:1e.3, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1e.3 8086:266d 103c:3081 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW
Modem interrupt assignment and sharing:
18: 76365 IO-APIC-fasteoi ipw2200, eth0
--- Bootup diagnostics for card in PCI slot 00:1e.3 ----
[ 12.037160] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 20 (level, low) -> IRQ 18
[ 12.037171] ACPI: PCI interrupt for device 0000:00:1e.3 disabled
The PCI slot 00:1e.3 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
----------------------------------------------------------------------------------------
CPU0
0: 50508 IO-APIC-edge timer
1: 100 IO-APIC-edge i8042
8: 7 IO-APIC-edge rtc
9: 2815 IO-APIC-fasteoi acpi
12: 125 IO-APIC-edge i8042
14: 21393 IO-APIC-edge libata
15: 0 IO-APIC-edge libata
16: 458 IO-APIC-fasteoi Intel ICH6
17: 1 IO-APIC-fasteoi yenta, tifm_7xx1, sdhci:slot0, sdhci:slot1, sdhci:slot2
18: 76375 IO-APIC-fasteoi ipw2200, eth0
19: 3586 IO-APIC-fasteoi uhci_hcd:usb1, ehci_hcd:usb5
20: 31132 IO-APIC-fasteoi uhci_hcd:usb2
21: 0 IO-APIC-fasteoi uhci_hcd:usb3
22: 79649 IO-APIC-fasteoi uhci_hcd:usb4, i915@pci:0000:00:02.0
23: 3 IO-APIC-fasteoi ohci1394
NMI: 0 Non-maskable interrupts
LOC: 37364 Local timer interrupts
RES: 0 Rescheduling interrupts
CAL: 0 function call interrupts
TLB: 0 TLB shootdowns
TRM: 0 Thermal event interrupts
SPU: 0 Spurious interrupts
ERR: 0
MIS: 0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-19-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Jun 18 14:43:41 UTC 2008 (Ubuntu 2.6.24-19.34-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f6e0000 (usable)
[ 0.000000] BIOS-e820: 000000003f6e0000 - 000000003f6eb000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f6eb000 - 000000003f700000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] 118MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 259808) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 259808
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 259808
[ 0.000000] On node 0 totalpages: 259808
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 237 pages used for memmap
[ 0.000000] HighMem zone: 30195 pages, LIFO batch:7
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F76F0 checksum 0
[ 0.000000] ACPI: RSDP 000F76F0, 0014 (r0 HP )
[ 0.000000] ACPI: RSDT 3F6E5167, 0044 (r1 HP 09BC 6040000 LTP 0)
[ 0.000000] ACPI: FACP 3F6EAE88, 0074 (r1 HP 09BC 6040000 LOHR 5F)
[ 0.000000] ACPI: DSDT 3F6E5A0C, 547C (r1 HP 09BC 6040000 MSFT 100000E)
[ 0.000000] ACPI: FACS 3F6FBFC0, 0040
[ 0.000000] ACPI: APIC 3F6EAEFC, 0068 (r1 HP 09BC 6040000 LOHR 5F)
[ 0.000000] ACPI: BOOT 3F6EAFD8, 0028 (r1 HP 09BC 6040000 LTP 1)
[ 0.000000] ACPI: MCFG 3F6EAF9C, 003C (r1 HP 09BC 6040000 LOHR 5F)
[ 0.000000] ACPI: SSDT 3F6E55C3, 02B9 (r1 HP 09BC 3000 INTL 20030224)
[ 0.000000] ACPI: SSDT 3F6E53EB, 01D8 (r1 HP 09BC 3001 INTL 20030224)
[ 0.000000] ACPI: SSDT 3F6E52D7, 0114 (r1 HP 09BC 3000 INTL 20030224)
[ 0.000000] ACPI: SSDT 3F6E51AB, 012C (r1 HP 09BC 1 INTL 20030224)
[ 0.000000] ACPI: DMI detected: Hewlett-Packard
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:13 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000dc000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257779
[ 0.000000] Kernel command line: root=UUID=c8bc57f5-9f7f-4542-9bc0-8bee51c4a45b ro quiet splash
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1596.510 MHz processor.
[ 9.993968] Console: colour VGA+ 80x25
[ 9.993973] console [tty0] enabled
[ 9.994405] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 9.994915] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 10.028976] Memory: 1017708k/1039232k available (2177k kernel code, 20768k reserved, 1006k data, 368k init, 121728k highmem)
[ 10.028985] virtual kernel memory layout:
[ 10.028986] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 10.028987] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 10.028989] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 10.028990] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 10.028991] .init : 0xc0421000 - 0xc047d000 ( 368 kB)
[ 10.028993] .data : 0xc0320434 - 0xc041bdc4 (1006 kB)
[ 10.028994] .text : 0xc0100000 - 0xc0320434 (2177 kB)
[ 10.028998] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 10.029046] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 10.109026] Calibrating delay using timer specific routine.. 3196.70 BogoMIPS (lpj=6393417)
[ 10.109058] Security Framework initialized
[ 10.109066] SELinux: Disabled at boot.
[ 10.109082] AppArmor: AppArmor initialized
[ 10.109086] Failure registering capabilities with primary security module.
[ 10.109096] Mount-cache hash table entries: 512
[ 10.109234] Initializing cgroup subsys ns
[ 10.109239] Initializing cgroup subsys cpuacct
[ 10.109252] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 00000000
[ 10.109264] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 10.109267] CPU: L2 cache: 2048K
[ 10.109270] CPU: After all inits, caps: afe9fbff 00100000 00000000 00002040 00000180 00000000 00000000 00000000
[ 10.109280] Compat vDSO mapped to ffffe000.
[ 10.109295] Checking 'hlt' instruction... OK.
[ 10.125457] SMP alternatives: switching to UP code
[ 10.127549] Freeing SMP alternatives: 11k freed
[ 10.127665] Early unpacking initramfs... done
[ 10.532722] ACPI: Core revision 20070126
[ 10.532814] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 10.561164] CPU0: Intel(R) Pentium(R) M processor 1.60GHz stepping 08
[ 10.561192] Total of 1 processors activated (3196.70 BogoMIPS).
[ 10.561387] ENABLING IO-APIC IRQs
[ 10.561584] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 10.708733] Brought up 1 CPUs
[ 10.708764] CPU0 attaching sched-domain:
[ 10.708767] domain 0: span 01
[ 10.708769] groups: 01
[ 10.708952] net_namespace: 64 bytes
[ 10.708963] Booting paravirtualized kernel on bare hardware
[ 10.709451] Time: 9:33:05 Date: 02/22/09
[ 10.709479] NET: Registered protocol family 16
[ 10.709683] EISA bus registered
[ 10.709710] ACPI: bus type pci registered
[ 10.710265] PCI: PCI BIOS revision 2.10 entry at 0xfd850, last bus=7
[ 10.710267] PCI: Using configuration type 1
[ 10.710283] Setting up standard PCI resources
[ 10.720987] ACPI: EC: Look up EC in DSDT
[ 10.722426] ACPI: Interpreter enabled
[ 10.722429] ACPI: (supports S0 S3 S4 S5)
[ 10.722445] ACPI: Using IOAPIC for interrupt routing
[ 10.724919] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 10.727071] ACPI: EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62
[ 10.727074] ACPI: EC: driver started in interrupt mode
[ 10.727115] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 10.727909] Force enabled HPET at base address 0xfed00000
[ 10.727915] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 10.727920] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[ 10.728711] PCI: Transparent bridge - 0000:00:1e.0
[ 10.728797] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 10.729036] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 10.729170] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 10.731486] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 10.731576] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 10.731664] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 10.731751] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 10.731837] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 10.731924] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 10.732010] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 10.732096] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 10.732216] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 10.732248] pnp: PnP ACPI init
[ 10.732255] ACPI: bus type pnp registered
[ 10.734309] pnp: PnP ACPI: found 8 devices
[ 10.734312] ACPI: ACPI bus type pnp unregistered
[ 10.734316] PnPBIOS: Disabled by ACPI PNP
[ 10.734541] PCI: Using ACPI for IRQ routing
[ 10.734544] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 10.734548] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0
[ 10.734550] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0
[ 10.734553] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.0
[ 10.768660] NET: Registered protocol family 8
[ 10.768662] NET: Registered protocol family 20
[ 10.768829] hpet clockevent registered
[ 10.768837] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 10.768842] hpet0: 3 64-bit timers, 14318180 Hz
[ 10.769881] AppArmor: AppArmor Filesystem Enabled
[ 10.772650] Time: tsc clocksource has been installed.
[ 10.780682] system 00:04: ioport range 0x200-0x20f has been reserved
[ 10.780686] system 00:04: ioport range 0x800-0x80f has been reserved
[ 10.780689] system 00:04: ioport range 0x1000-0x107f has been reserved
[ 10.780692] system 00:04: ioport range 0x1180-0x11bf has been reserved
[ 10.780696] system 00:04: iomem range 0xe0000000-0xefffffff could not be reserved
[ 10.780699] system 00:04: iomem range 0xf0000000-0xf0003fff could not be reserved
[ 10.780703] system 00:04: iomem range 0xf0004000-0xf0004fff could not be reserved
[ 10.780706] system 00:04: iomem range 0xf0005000-0xf0005fff could not be reserved
[ 10.780709] system 00:04: iomem range 0xf0008000-0xf000bfff could not be reserved
[ 10.780713] system 00:04: iomem range 0xfed20000-0xfed8ffff could not be reserved
[ 10.811120] PCI: Bridge: 0000:00:1c.0
[ 10.811122] IO window: disabled.
[ 10.811128] MEM window: disabled.
[ 10.811133] PREFETCH window: disabled.
[ 10.811142] PCI: Bus 7, cardbus bridge: 0000:06:06.0
[ 10.811145] IO window: 00003400-000034ff
[ 10.811150] IO window: 00003800-000038ff
[ 10.811156] PREFETCH window: 54000000-57ffffff
[ 10.811161] MEM window: 58000000-5bffffff
[ 10.811168] PCI: Bridge: 0000:00:1e.0
[ 10.811171] IO window: 3000-3fff
[ 10.811177] MEM window: b0100000-b01fffff
[ 10.811182] PREFETCH window: disabled.
[ 10.811213] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16
[ 10.811222] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 10.811236] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 10.811253] ACPI: PCI Interrupt 0000:06:06.0[A] -> GSI 22 (level, low) -> IRQ 17
[ 10.811260] PCI: Setting latency timer of device 0000:06:06.0 to 64
[ 10.811272] NET: Registered protocol family 2
[ 10.848673] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 10.848919] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 10.849829] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 10.850390] TCP: Hash tables configured (established 131072 bind 65536)
[ 10.850393] TCP reno registered
[ 10.860770] checking if image is initramfs... it is
[ 11.272364] Switched to high resolution mode on CPU 0
[ 11.649647] Freeing initrd memory: 7699k freed
[ 11.649913] Simple Boot Flag at 0x36 set to 0x1
[ 11.650375] audit: initializing netlink socket (disabled)
[ 11.650395] audit(1235295185.492:1): initialized
[ 11.650595] highmem bounce pool size: 64 pages
[ 11.652671] VFS: Disk quotas dquot_6.5.1
[ 11.652759] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 11.652918] io scheduler noop registered
[ 11.652921] io scheduler anticipatory registered
[ 11.652923] io scheduler deadline registered
[ 11.652935] io scheduler cfq registered (default)
[ 11.652950] Boot video device is 0000:00:02.0
[ 11.653158] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 11.653216] assign_interrupt_mode Found MSI capability
[ 11.653268] Allocate Port Service[0000:00:1c.0:pcie00]
[ 11.653310] Allocate Port Service[0000:00:1c.0:pcie02]
[ 11.653595] isapnp: Scanning for PnP cards...
[ 12.007688] isapnp: No Plug & Play device found
[ 12.036426] Real Time Clock Driver v1.12ac
[ 12.036544] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 12.037160] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 20 (level, low) -> IRQ 18
[ 12.037171] ACPI: PCI interrupt for device 0000:00:1e.3 disabled
[ 12.037849] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 12.037926] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 12.038025] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 12.043675] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 12.047102] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 12.047107] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 12.047109] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 12.047112] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 12.047115] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 12.055838] mice: PS/2 mouse device common for all mice
[ 12.055968] EISA: Probing bus 0 at eisa.0
[ 12.055975] Cannot allocate resource for EISA slot 1
[ 12.055978] Cannot allocate resource for EISA slot 2
[ 12.055980] Cannot allocate resource for EISA slot 3
[ 12.056001] EISA: Detected 0 cards.
[ 12.056007] cpuidle: using governor ladder
[ 12.056009] cpuidle: using governor menu
[ 12.056111] NET: Registered protocol family 1
[ 12.056141] Using IPI No-Shortcut mode
[ 12.056182] registered taskstats version 1
[ 12.056310] Magic number: 13:609:576
[ 12.056356] hash matches device ptyb8
[ 12.056423] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 12.056425] EDD information not available.
[ 12.056667] Freeing unused kernel memory: 368k freed
[ 12.079770] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 12.492036] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly.
[ 12.691779] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly.
[ 12.892017] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly.
[ 13.091526] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly.
[ 13.292655] fuse init (API version 7.9)
[ 13.312412] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
[ 13.315389] ACPI: Thermal Zone [THR0] (53 C)
[ 13.316366] ACPI: Invalid passive threshold
[ 13.316672] ACPI: Thermal Zone [THR1] (43 C)
[ 13.916967] usbcore: registered new interface driver usbfs
[ 13.916997] usbcore: registered new interface driver hub
[ 13.930534] usbcore: registered new device driver usb
[ 13.946533] USB Universal Host Controller Interface driver v3.0
[ 13.946606] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
[ 13.946618] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 13.946623] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 13.947035] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 13.947070] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001820
[ 13.947217] usb usb1: configuration #1 chosen from 1 choice
[ 13.947242] hub 1-0:1.0: USB hub found
[ 13.947248] hub 1-0:1.0: 2 ports detected
[ 14.050544] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
[ 14.050558] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 14.050564] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 14.050588] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 14.050622] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001840
[ 14.050744] usb usb2: configuration #1 chosen from 1 choice
[ 14.050770] hub 2-0:1.0: USB hub found
[ 14.050776] hub 2-0:1.0: 2 ports detected
[ 14.110410] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 14.154479] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 21
[ 14.154494] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 14.154500] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 14.154525] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 14.154559] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00001860
[ 14.154685] usb usb3: configuration #1 chosen from 1 choice
[ 14.154712] hub 3-0:1.0: USB hub found
[ 14.154718] hub 3-0:1.0: 2 ports detected
[ 14.154976] SCSI subsystem initialized
[ 14.217031] libata version 3.00 loaded.
[ 14.258420] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 22
[ 14.258436] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 14.258441] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 14.258468] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 14.258503] uhci_hcd 0000:00:1d.3: irq 22, io base 0x00001880
[ 14.258624] usb usb4: configuration #1 chosen from 1 choice
[ 14.258649] hub 4-0:1.0: USB hub found
[ 14.258655] hub 4-0:1.0: 2 ports detected
[ 14.362440] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
[ 14.362458] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 14.362462] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 14.362488] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 14.366420] ehci_hcd 0000:00:1d.7: debug port 1
[ 14.366427] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 14.366435] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xb0040000
[ 14.394198] usb 2-2: new low speed USB device using uhci_hcd and address 2
[ 14.406182] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 14.406317] usb usb5: configuration #1 chosen from 1 choice
[ 14.406343] hub 5-0:1.0: USB hub found
[ 14.406351] hub 5-0:1.0: 8 ports detected
[ 14.510395] ACPI: PCI Interrupt 0000:06:06.2[C] -> GSI 21 (level, low) -> IRQ 23
[ 14.560176] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[23] MMIO=[b0108000-b01087ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 14.564327] 8139cp 0000:06:07.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 14.564332] 8139cp 0000:06:07.0: Try the "8139too" driver instead.
[ 14.567701] 8139too Fast Ethernet driver 0.9.28
[ 14.567761] ACPI: PCI Interrupt 0000:06:07.0[A] -> GSI 20 (level, low) -> IRQ 18
[ 14.568644] eth0: RealTek RTL8139 at 0x3000, 00:0a:e4:d3:bd:42, IRQ 18
[ 14.568647] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 14.573423] ata_piix 0000:00:1f.1: version 2.12
[ 14.573440] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 21
[ 14.573478] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 14.574266] scsi0 : ata_piix
[ 14.574785] scsi1 : ata_piix
[ 14.575339] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 14.575342] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 14.902385] ata1.00: ATA-6: FUJITSU MHT2060AT PL, 0022, max UDMA/100
[ 14.902390] ata1.00: 117210240 sectors, multi 16: LBA
[ 14.902419] ata1.01: ATAPI: HL-DT-ST DVD-RW GCA-4080N, 0C35, max MWDMA2
[ 14.918301] ata1.00: configured for UDMA/100
[ 15.009769] usb 2-2: new low speed USB device using uhci_hcd and address 3
[ 15.090089] ata1.01: configured for MWDMA2
[ 15.090139] ata2: port disabled. ignoring.
[ 15.090293] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHT2060A 0022 PQ: 0 ANSI: 5
[ 15.090946] scsi 0:0:1:0: CD-ROM HL-DT-ST DVD-RW GCA-4080N 0C35 PQ: 0 ANSI: 5
[ 15.104537] Driver 'sd' needs updating - please use bus_type methods
[ 15.104617] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
[ 15.104630] sd 0:0:0:0: [sda] Write Protect is off
[ 15.104633] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 15.104649] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 15.104700] sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
[ 15.104711] sd 0:0:0:0: [sda] Write Protect is off
[ 15.104713] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 15.104729] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 15.104733] sda:Driver 'sr' needs updating - please use bus_type methods
[ 15.120704] sda1 sda2 sda3 sda4
[ 15.122579] sd 0:0:0:0: [sda] Attached SCSI disk
[ 15.128084] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 15.128103] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 15.143517] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 15.143522] Uniform CD-ROM driver Revision: 3.20
[ 15.143567] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 15.173155] usb 2-2: configuration #1 chosen from 1 choice
[ 15.191763] usbcore: registered new interface driver hiddev
[ 15.206741] input: Microsoft Microsoft Wireless Optical Mouse® 1.00 as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/input/input2
[ 15.213851] input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse® 1.00] on usb-0000:00:1d.1-2
[ 15.213872] usbcore: registered new interface driver usbhid
[ 15.213876] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 15.265592] Clocksource tsc unstable (delta = -19090189092 ns)
[ 15.269591] Time: hpet clocksource has been installed.
[ 15.292534] Attempting manual resume
[ 15.292538] swsusp: Resume From Partition 8:3
[ 15.292540] PM: Checking swsusp image.
[ 15.292694] PM: Resume from disk failed.
[ 15.310610] kjournald starting. Commit interval 5 seconds
[ 15.310621] EXT3-fs: mounted filesystem with ordered data mode.
[ 15.359436] ieee1394: Host added: ID:BUS[0-00:1023] GUID[05e40a00021d5026]
[ 17.769703] Linux agpgart interface v0.102
[ 17.913730] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 17.991959] agpgart: Detected an Intel 915GM Chipset.
[ 17.992614] agpgart: Detected 7932K stolen memory.
[ 18.049548] agpgart: AGP aperture is 256M @ 0xc0000000
[ 18.097555] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 18.289591] input: Power Button (FF) as /devices/virtual/input/input3
[ 18.301304] ACPI: Power Button (FF) [PWRF]
[ 18.301382] input: Lid Switch as /devices/virtual/input/input4
[ 18.312396] ACPI: Lid Switch [LID0]
[ 18.312485] input: Sleep Button (CM) as /devices/virtual/input/input5
[ 18.325283] ACPI: Sleep Button (CM) [SLPB]
[ 18.325371] input: Power Button (CM) as /devices/virtual/input/input6
[ 18.341273] ACPI: Power Button (CM) [PWB]
[ 18.391890] ACPI: WMI-Acer: Mapper loaded
[ 19.149953] ieee80211_crypt: registered algorithm 'NULL'
[ 19.216686] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 19.216691] ieee80211: Copyright (C) 2004-2005 Intel Corporation
[ 19.456515] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 19.456521] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 19.456621] ACPI: PCI Interrupt 0000:06:05.0[A] -> GSI 20 (level, low) -> IRQ 18
[ 19.492065] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 19.940773] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 19.952153] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 20.038726] sdhci: Secure Digital Host Controller Interface driver
[ 20.038730] sdhci: Copyright(c) Pierre Ossman
[ 21.178269] intel_rng: FWH not detected
[ 21.338663] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 21.375182] iTCO_vendor_support: vendor-support=0
[ 21.411139] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 21.411236] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
[ 21.411272] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 21.451207] ACPI: AC Adapter [AC] (on-line)
[ 21.528895] ACPI: Battery Slot [BAT0] (battery present)
[ 22.614773] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly.
[ 22.814675] atkbd.c: Spurious NAK on isa0060/serio0. Some program might be trying access hardware directly.
[ 23.301537] input: PS/2 Mouse as /devices/virtual/input/input9
[ 23.466362] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input10
[ 23.578843] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
[ 23.578887] Yenta: CardBus bridge found at 0000:06:06.0 [103c:3081]
[ 23.578911] Yenta: Enabling burst memory read transactions
[ 23.578916] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 23.578919] Yenta: Routing CardBus interrupts to PCI
[ 23.578925] Yenta TI: socket 0000:06:06.0, mfunc 0x01aa1b02, devctl 0x64
[ 23.779854] Yenta: ISA IRQ mask 0x0cf8, PCI irq 17
[ 23.779860] Socket status: 30000006
[ 23.779863] Yenta: Raising subordinate bus# of parent bus (#06) from #07 to #0a
[ 23.779869] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
[ 23.779872] cs: IO port probe 0x3000-0x3fff: clean.
[ 23.780129] pcmcia: parent PCI bridge Memory window: 0xb0100000 - 0xb01fffff
[ 23.787062] ACPI: PCI Interrupt 0000:06:06.3[A] -> GSI 22 (level, low) -> IRQ 17
[ 23.787283] sdhci: SDHCI controller found at 0000:06:06.4 [104c:8034] (rev 0)
[ 23.787303] ACPI: PCI Interrupt 0000:06:06.4[A] -> GSI 22 (level, low) -> IRQ 17
[ 23.787317] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 23.787363] mmc0: SDHCI at 0xb0109000 irq 17 DMA
[ 23.787374] sdhci:slot1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 23.787403] mmc1: SDHCI at 0xb0108c00 irq 17 DMA
[ 23.787413] sdhci:slot2: Will use DMA mode even though HW doesn't fully claim to support it.
[ 23.787443] mmc2: SDHCI at 0xb0108800 irq 17 DMA
[ 23.791064] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 17 (level, low) -> IRQ 16
[ 23.791079] PCI: Setting latency timer of device 0000:00:1e.2 to 64
[ 23.904439] cs: IO port probe 0x100-0x3af: clean.
[ 23.906127] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 23.906854] cs: IO port probe 0x820-0x8ff: clean.
[ 23.907452] cs: IO port probe 0xc00-0xcf7: clean.
[ 23.908209] cs: IO port probe 0xa00-0xaff: clean.
[ 23.939065] intel8x0_measure_ac97_clock: measured 55478 usecs
[ 23.939068] intel8x0: clocking to 48000
[ 24.051185] lp: driver loaded but no devices found
[ 24.264692] Adding 200804k swap on /dev/sda3. Priority:-1 extents:1 across:200804k
[ 24.334842] EXT3 FS on sda2, internal journal
[ 24.772273] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 25.024472] No dock devices found.
[ 25.736580] apm: BIOS not found.
[ 25.799029] ppdev: user-space parallel port driver
[ 25.817871] audit(1235320432.582:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=4896 profile="/usr/sbin/cupsd" namespace="default"
[ 38.837967] Marking TSC unstable due to: cpufreq changes.
[ 52.618268] eth0: link down
[ 52.788007] Bluetooth: Core ver 2.11
[ 52.788738] NET: Registered protocol family 31
[ 52.788745] Bluetooth: HCI device and connection manager initialized
[ 52.788752] Bluetooth: HCI socket layer initialized
[ 52.842968] Bluetooth: L2CAP ver 2.9
[ 52.842976] Bluetooth: L2CAP socket layer initialized
[ 26.469212] Bluetooth: RFCOMM socket layer initialized
[ 26.469225] Bluetooth: RFCOMM TTY layer initialized
[ 26.469227] Bluetooth: RFCOMM ver 1.8
[ 28.086566] [drm] Initialized drm 1.1.0 20060810
[ 28.090045] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 22
[ 28.090054] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 28.090405] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 62.571654] NET: Registered protocol family 10
[ 62.572413] lo: Disabled Privacy Extensions
[ 62.573551] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 62.574283] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 106.715034] usb 5-1: new high speed USB device using ehci_hcd and address 3
[ 106.746439] usb 5-1: configuration #1 chosen from 1 choice
[ 53.464314] usbcore: registered new interface driver libusual
[ 53.517281] Initializing USB Mass Storage driver...
[ 53.524566] scsi2 : SCSI emulation for USB Mass Storage devices
[ 53.526687] usbcore: registered new interface driver usb-storage
[ 53.526862] USB Mass Storage support registered.
[ 53.527094] usb-storage: device found at 3
[ 53.527097] usb-storage: waiting for device to settle before scanning
[ 107.146779] usb-storage: device scan complete
[ 107.147474] scsi 2:0:0:0: Direct-Access Simple Flash Disk 2.0 2.00 PQ: 0 ANSI: 2
[ 108.386001] ready
[ 108.386495] sd 2:0:0:0: [sdb] 2037760 512-byte hardware sectors (1043 MB)
[ 108.386910] sd 2:0:0:0: [sdb] Write Protect is off
[ 108.386917] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 108.386922] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 108.388934] sd 2:0:0:0: [sdb] 2037760 512-byte hardware sectors (1043 MB)
[ 108.389450] sd 2:0:0:0: [sdb] Write Protect is off
[ 108.389457] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 108.389462] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 108.389469] sdb: sdb1
[ 108.390484] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 108.390565] sd 2:0:0:0: Attached scsi generic sg2 type 0
Module Size Used by
usb_storage 73664 1
libusual 19108 1 usb_storage
ipv6 267780 8
i915 32512 2
drm 82452 3 i915
rfcomm 41744 2
l2cap 25728 13 rfcomm
bluetooth 61156 4 rfcomm,l2cap
ppdev 10372 0
speedstep_centrino 9152 0
cpufreq_ondemand 9740 1
cpufreq_conservative 8712 0
cpufreq_powersave 2688 0
cpufreq_userspace 5284 0
cpufreq_stats 7104 0
freq_table 5536 3 speedstep_centrino,cpufreq_ondemand,cpufreq_stats
container 5632 0
dock 11280 0
sbs 15112 0
sbshc 7680 1 sbs
iptable_filter 3840 0
ip_tables 14820 1 iptable_filter
x_tables 16132 1 ip_tables
nls_iso8859_1 4992 2
nls_cp437 6656 2
vfat 14464 2
fat 54556 1 vfat
sbp2 24072 0
parport_pc 36260 0
lp 12324 0
parport 37832 3 ppdev,parport_pc,lp
pcmcia 40876 0
joydev 13120 0
psmouse 40336 0
serio_raw 7940 0
evdev 13056 7
battery 14212 0
ac 6916 0
iTCO_wdt 13092 0
iTCO_vendor_support 4868 1 iTCO_wdt
pcspkr 4224 0
snd_intel8x0 35356 3
snd_ac97_codec 101028 1 snd_intel8x0
ac97_bus 3072 1 snd_ac97_codec
snd_pcm_oss 42144 0
snd_mixer_oss 17920 1 snd_pcm_oss
snd_pcm 78596 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_seq_dummy 4868 0
sdhci 19076 0
tifm_7xx1 8576 0
video 19856 0
output 4736 1 video
yenta_socket 27276 1
rsrc_nonstatic 13696 1 yenta_socket
mmc_core 51460 1 sdhci
snd_seq_oss 35584 0
snd_seq_midi 9376 0
ipw2200 146120 0
tifm_core 11012 1 tifm_7xx1
pcmcia_core 40596 3 pcmcia,yenta_socket,rsrc_nonstatic
snd_rawmidi 25760 1 snd_seq_midi
ieee80211 35528 1 ipw2200
ieee80211_crypt 7040 1 ieee80211
snd_seq_midi_event 8320 2 snd_seq_oss,snd_seq_midi
snd_seq 54224 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 24836 2 snd_pcm,snd_seq
snd_seq_device 9612 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 56996 17 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 8800 1 snd
snd_page_alloc 11400 2 snd_intel8x0,snd_pcm
wmi_acer 9644 0
button 9232 0
shpchp 34452 0
intel_agp 25492 1
pci_hotplug 30880 1 shpchp
agpgart 34760 3 drm,intel_agp
ext3 136712 1
jbd 48404 1 ext3
mbcache 9600 1 ext3
usbhid 31872 0
hid 38784 1 usbhid
sg 36880 0
sr_mod 17956 0
cdrom 37408 1 sr_mod
sd_mod 30720 7
pata_acpi 8320 0
ata_piix 19588 4
8139too 27520 0
ata_generic 8324 0
libata 159344 3 pata_acpi,ata_piix,ata_generic
scsi_mod 151436 6 usb_storage,sbp2,sg,sr_mod,sd_mod,libata
8139cp 24704 0
mii 6400 2 8139too,8139cp
ohci1394 33584 0
ieee1394 93752 2 sbp2,ohci1394
ehci_hcd 37900 0
uhci_hcd 27024 0
usbcore 146028 6 usb_storage,libusual,usbhid,ehci_hcd,uhci_hcd
thermal 16796 0
processor 36872 2 thermal
fan 5636 0
fbcon 42912 0
tileblit 3456 1 fbcon
font 9472 1 fbcon
bitblit 6784 1 fbcon
softcursor 3072 1 bitblit
fuse 50580 5
_________________________________________________________________
Windows Live™ Hotmail®…more than just e-mail.
http://windowslive.com/howitworks?ocid=TXT_TAGLM_WL_t2_hm_justgotbetter_howitworks_022009
