Ammar, Predictive diagnostics for card in bus 02:03.0: Modem chipset detected on NAME="Modem: Smart Link Ltd. SmartPCI2800 V.92 PCI Soft DFT " CLASS=0703 PCIDEV=2000:2800 SUBSYS=1801:2800 IRQ=19 IDENT=slamr For candidate modem in: 02:03.0 0703 Modem: Smart Link Ltd. SmartPCI2800 V.92 PCI Soft DFT Primary device ID: 2000:2800 Support type needed or chipset: slamr ----------------end Softmodem section -------------- The modem is supported by the Smartlink plus the slmodemd helper utility. Read the DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through guidance. For 2.6.27-11-generic compiling drivers is necessary. As of now the current packages at http://linmodems.technion.ac.il/packages/smartlink/ are the ungrab-winmodem-20080817.tar.gz and slmodem-2.9.11-20080126.tar.gz If after you install you have troubles connecting it could be due to : Modem interrupt assignment and sharing: 19: 0 IO-APIC-fasteoi uhci_hcd:usb3 --- Bootup diagnostics for card in PCI slot 02:03.0 ---- [ 0.462976] PCI: 0000:02:03.0 reg 10 32bit mmio: [f6000000, f6ffffff] [ 0.463021] pci 0000:02:03.0: PME# supported from D3hot D3cold [ 0.463026] pci 0000:02:03.0: PME# disabled [ 1.741937] serial 0000:02:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.741946] serial 0000:02:03.0: PCI INT A disabled Regards, Antonio 2009/2/17 Ammar Mlli <ammar.mlle@xxxxxxxxx>: > plz help me >