--- Begin Message ---
- Subject: Problems with modem detention
- From: Péricles Mariano <periclesmariano@xxxxxxxxxxxx>
- Date: Sat, 07 Feb 2009 19:13:23 -0200
- Authentication-results: mta131.mail.re1.yahoo.com from=yahoo.com.br; domainkeys=fail (bad sig); from=yahoo.com.br; dkim=neutral (no sig)
- User-agent: Thunderbird 2.0.0.19 (X11/20090114)
I get the file SLMODEMD_gcc4.2_alsa1.0.17.tar.gz from
http://linmodems.technion.ac.il/packages/smartlink/ an unpack it, so i
use the command cd to open the folder in the terminal. In the files from
package say to type in terminal as root ./configure, so the answer was:
[root@localhost SLMODEMD_gcc4.2_alsa1.0.17]# ./setup
There is already installed a slmodemd of version: 2.9.11
There is a file /usr/sbin/slmodemd
Moving /usr/sbin/slmodemd to /usr/sbin/slmodemd.2.9.11
Copying slmodemd to /usr/sbin/slmodemd, making exectuable, and checking
for version 2.9.11
SmartLink Soft Modem: version 2.9.11 Dec 16 2008 22:54:51
Version verified: 2.9.11
With root permission, the typical activation command is:
for modems hosted on High Definition Audio cards
slmodemd -c USA --alsa hw:0,6
for modems of the AC'97 family
slmodemd -c USA --alsa modem:1
for modems on ALI5451 sound cards
slmodemd -c USA --alsa hw:0,1
for Smartlink chipset PCI card modems:
slmodemd -c USA /dev/slamr0
for Smartlink chipset USB modems
slmodemd -c USA /dev/slusb0
If not in the USA, replace USA with a country from the output of:
slmodemd --countrylist
For other slmodemd parameters, query with:
slmodemd --help
Report any problems to discuss@xxxxxxxxxxxxx
After I typed slmodemd -c BRAZIL --alsa hw:0,6
(because I'm from Brazil)
and the answer was:
[root@localhost SLMODEMD_gcc4.2_alsa1.0.17]# slmodemd -c BRAZIL --alsa
hw:0,6
SmartLink Soft Modem: version 2.9.11 Dec 16 2008 22:54:51
symbolic link `/dev/ttySL0' -> `/dev/pts/3' created.
modem `hw:0,6' created. TTY is `/dev/pts/3'
Use `/dev/ttySL0' as modem device, Ctrl+C for termination.
^C[root@localhost SLMODEMD_gcc4.2_alsa1.0.17]#
I configured kppp for to use the modem in /dev/ttySL0 but it can't find
the modem
I have windows XP installed in my computer and the modem is recognized
how motorola SM56 and works perfectly.
I'll thanks for some help, because I don't understand to much about
hardware and there is a lot of information that I cant understand in the
files from scanmodem and from SLMODEMD_gcc4.2_alsa1.0.17.tar.gz
CPU0
0: 272 IO-APIC-edge timer
1: 699 IO-APIC-edge i8042
8: 1 IO-APIC-edge rtc0
10: 3496 IO-APIC-fasteoi acpi
12: 2877 IO-APIC-edge i8042
14: 12736 IO-APIC-edge pata_via
15: 0 IO-APIC-edge pata_via
17: 28001 IO-APIC-fasteoi mmc0, mmc1, HDA Intel
20: 0 IO-APIC-fasteoi uhci_hcd:usb2
21: 368276 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb4, sata_via
22: 31358 IO-APIC-fasteoi uhci_hcd:usb3
23: 16950 IO-APIC-fasteoi uhci_hcd:usb5, eth0
NMI: 0 Non-maskable interrupts
LOC: 876795 Local timer interrupts
RES: 0 Rescheduling interrupts
CAL: 0 function call interrupts
TLB: 0 TLB shootdowns
TRM: 0 Thermal event interrupts
SPU: 0 Spurious interrupts
ERR: 0
MIS: 0
Linux version 2.6.27.10-desktop586-1mnb (qateam@xxxxxxxxxxxxxxxxxx) (gcc version 4.3.2 (GCC) ) #1 SMP Thu Jan 29 10:40:00 EST 2009
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003be90000 (usable)
BIOS-e820: 000000003be90000 - 000000003be9a000 (ACPI data)
BIOS-e820: 000000003be9a000 - 000000003bf00000 (ACPI NVS)
BIOS-e820: 000000003bf00000 - 0000000040000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
DMI present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
last_pfn = 0x3be90 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
kernel direct mapping tables up to 38000000 @ 10000-15000
RAMDISK: 37c65000 - 37fefc9b
ACPI: RSDP 000F7970, 0024 (r2 PTLTD )
ACPI: XSDT 3BE9376E, 0054 (r1 POSITI ABACAXIS 6040000 LTP 0)
ACPI: FACP 3BE99CFE, 00F4 (r3 VN896 PTLTW 6040000 PTL_ F4240)
ACPI: DSDT 3BE950C3, 4BC7 (r1 VIA PTL_ACPI 6040000 MSFT 100000E)
ACPI: FACS 3BE9AFC0, 0040
ACPI: APIC 3BE99DF2, 005C (r1 PTLTD APIC 6040000 LTP 0)
ACPI: SLIC 3BE99E4E, 0176 (r1 POSITI ABACAXIS 6040000 LTP 0)
ACPI: MCFG 3BE99FC4, 003C (r1 PTLTD MCFG 6040000 LTP 0)
ACPI: SSDT 3BE94BAB, 0518 (r1 PmRef Cpu0Cst 3001 INTL 20050228)
ACPI: SSDT 3BE937C2, 13E9 (r1 PmRef CpuPm 3000 INTL 20050228)
62MB HIGHMEM available.
896MB LOWMEM available.
mapped low ram: 0 - 38000000
low ram: 00000000 - 38000000
bootmap 00011000 - 00018000
(9 early reservations) ==> bootmem [0000000000 - 0038000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 00005947c0] TEXT DATA BSS ==> [0000100000 - 00005947c0]
#4 [0037c65000 - 0037fefc9b] RAMDISK ==> [0037c65000 - 0037fefc9b]
#5 [0000595000 - 0000598000] INIT_PG_TABLE ==> [0000595000 - 0000598000]
#6 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000]
#7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
#8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
found SMP MP-table at [c00f79a0] 000f79a0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x00038000
HighMem 0x00038000 -> 0x0003be90
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009d
0: 0x00000100 -> 0x0003be90
On node 0 totalpages: 245277
free_area_init_node: node 0, pgdat c049f100, node_mem_map c1000200
DMA zone: 3949 pages, LIFO batch:0
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 15890 pages, LIFO batch:3
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfecc0000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 3, address 0xfecc0000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ9 used by override.
ACPI: IRQ10 used by override.
Enabling APIC mode: Flat. Using 2 I/O APICs
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 1 CPUs, 0 hotplug CPUs
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
mapped IOAPIC to ffff9000 (fecc0000)
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
PERCPU: Allocating 40988 bytes of per cpu data
NR_CPUS: 32, nr_cpu_ids: 1, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243359
Kernel command line: BOOT_IMAGE=linux root=UUID=74d8bb0a-93b0-4052-a3ac-db7844974447 resume=UUID=8b5a80e9-1864-4e0e-b440-ded9d71645f8 splash=verbose vga=788
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Extended CMOS year: 2000
TSC: PIT calibration confirmed by PMTIMER.
TSC: using PIT calibration value
Detected 1994.958 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 964024k/981568k available (2593k kernel code, 16884k reserved, 1205k data, 364k init, 64064k highmem)
virtual kernel memory layout:
fixmap : 0xffe17000 - 0xfffff000 (1952 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc04bc000 - 0xc0517000 ( 364 kB)
.data : 0xc0388416 - 0xc04b5a00 (1205 kB)
.text : 0xc0100000 - 0xc0388416 (2593 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.91 BogoMIPS (lpj=1994958)
Security Framework initialized
AppArmor: AppArmor disabled by boottime parameter
Mount-cache hash table entries: 512
Hook version: 2.6.27-2.3 2008/08/29
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
Early unpacking initramfs... done
Freeing initrd memory: 3627k freed
ACPI: Core revision 20080609
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...
..... (found apic 0 pin 0) ...
....... works.
CPU0: Intel(R) Celeron(R) CPU 550 @ 2.00GHz stepping 01
Brought up 1 CPUs
Total of 1 processors activated (3989.91 BogoMIPS).
CPU0 attaching NULL sched-domain.
net_namespace: 840 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 5
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 2.10 entry at 0xfd7af, last bus=6
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 5
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: GPE = 0xb, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: 0000:00:00.0 reg 10 32bit mmio: [f0000000, f7ffffff]
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
PCI: 0000:00:0f.0 reg 10 io port: [4cb0, 4cb7]
PCI: 0000:00:0f.0 reg 14 io port: [4ca4, 4ca7]
PCI: 0000:00:0f.0 reg 18 io port: [4ca8, 4caf]
PCI: 0000:00:0f.0 reg 1c io port: [4ca0, 4ca3]
PCI: 0000:00:0f.0 reg 20 io port: [4c80, 4c8f]
PCI: 0000:00:0f.0 reg 24 io port: [4400, 44ff]
PCI: 0000:00:0f.1 reg 20 io port: [4c90, 4c9f]
PCI: 0000:00:10.0 reg 20 io port: [4c00, 4c1f]
pci 0000:00:10.0: supports D1
pci 0000:00:10.0: supports D2
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.0: PME# disabled
PCI: 0000:00:10.1 reg 20 io port: [4c20, 4c3f]
pci 0000:00:10.1: supports D1
pci 0000:00:10.1: supports D2
pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.1: PME# disabled
PCI: 0000:00:10.2 reg 20 io port: [4c40, 4c5f]
pci 0000:00:10.2: supports D1
pci 0000:00:10.2: supports D2
pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.2: PME# disabled
PCI: 0000:00:10.3 reg 20 io port: [4c60, 4c7f]
pci 0000:00:10.3: supports D1
pci 0000:00:10.3: supports D2
pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.3: PME# disabled
PCI: 0000:00:10.4 reg 10 32bit mmio: [fa400000, fa4000ff]
pci 0000:00:10.4: supports D1
pci 0000:00:10.4: supports D2
pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.4: PME# disabled
PCI: 0000:00:12.0 reg 10 io port: [4800, 48ff]
PCI: 0000:00:12.0 reg 14 32bit mmio: [fa400400, fa4004ff]
pci 0000:00:12.0: supports D1
pci 0000:00:12.0: supports D2
pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:12.0: PME# disabled
PCI: 0000:01:00.0 reg 10 32bit mmio: [c0000000, dfffffff]
PCI: 0000:01:00.0 reg 14 32bit mmio: [f9000000, f9ffffff]
PCI: 0000:01:00.0 reg 30 32bit mmio: [0, ffff]
pci 0000:01:00.0: supports D1
pci 0000:01:00.0: supports D2
PCI: bridge 0000:00:01.0 32bit mmio: [f9000000, f9ffffff]
PCI: bridge 0000:00:01.0 32bit mmio pref: [c0000000, dfffffff]
PCI: bridge 0000:00:03.0 io port: [5000, 6fff]
PCI: bridge 0000:00:03.0 32bit mmio: [f8800000, f8ffffff]
PCI: bridge 0000:00:03.0 64bit mmio pref: [f8000000, f87fffff]
PCI: 0000:05:01.0 reg 10 64bit mmio: [fa000000, fa003fff]
pci 0000:05:01.0: PME# supported from D0 D3hot D3cold
pci 0000:05:01.0: PME# disabled
PCI: bridge 0000:00:13.0 32bit mmio: [fa000000, fa0fffff]
PCI: 0000:06:04.0 reg 10 32bit mmio: [0, 7f]
pci 0000:06:04.0: supports D1
pci 0000:06:04.0: supports D2
pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot
pci 0000:06:04.0: PME# disabled
PCI: 0000:06:04.1 reg 10 32bit mmio: [0, ff]
pci 0000:06:04.1: supports D1
pci 0000:06:04.1: supports D2
pci 0000:06:04.1: PME# supported from D0 D1 D2 D3hot
pci 0000:06:04.1: PME# disabled
PCI: 0000:06:04.3 reg 10 32bit mmio: [0, ff]
pci 0000:06:04.3: supports D1
pci 0000:06:04.3: supports D2
pci 0000:06:04.3: PME# supported from D0 D1 D2 D3hot
pci 0000:06:04.3: PME# disabled
pci 0000:00:13.1: transparent bridge
PCI: bridge 0000:00:13.1 32bit mmio: [fa100000, fa1fffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGC._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE0C._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SP2P._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PE._PRT]
ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *9, disabled.
ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *10, disabled.
ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *11, disabled.
ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *3, disabled.
ACPI: PCI Interrupt Link [LNKA] (IRQs *9 10 11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 9 10 11 12) *3
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:01: mem resource (0xf0012000-0xf0012fff) overlaps 0000:00:00.0 BAR 0 (0xf0000000-0xf7ffffff), disabling
pnp 00:01: mem resource (0xf0013000-0xf0013fff) overlaps 0000:00:00.0 BAR 0 (0xf0000000-0xf7ffffff), disabling
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
system 00:06: iomem range 0x0-0x9ffff could not be reserved
system 00:06: iomem range 0xe0000-0xfffff could not be reserved
system 00:06: iomem range 0xfff00000-0xffffffff could not be reserved
system 00:06: iomem range 0xffee0000-0xffefffff has been reserved
system 00:06: iomem range 0xfec00000-0xfec0ffff could not be reserved
system 00:06: iomem range 0xfee00000-0xfee0ffff could not be reserved
system 00:07: ioport range 0x200-0x20f has been reserved
system 00:07: ioport range 0x400-0x40f has been reserved
system 00:07: ioport range 0x4d0-0x4d1 has been reserved
system 00:07: ioport range 0xfe10-0xfe11 has been reserved
system 00:07: ioport range 0xfe00-0xfe00 has been reserved
system 00:07: ioport range 0x4000-0x407f has been reserved
system 00:07: ioport range 0x4100-0x411f has been reserved
pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff]
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: disabled
pci 0000:00:01.0: MEM window: 0xf9000000-0xf9ffffff
pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000dfffffff
pci 0000:00:02.0: PCI bridge, secondary bus 0000:02
pci 0000:00:02.0: IO window: disabled
pci 0000:00:02.0: MEM window: disabled
pci 0000:00:02.0: PREFETCH window: disabled
pci 0000:00:03.0: PCI bridge, secondary bus 0000:03
pci 0000:00:03.0: IO window: 0x5000-0x6fff
pci 0000:00:03.0: MEM window: 0xf8800000-0xf8ffffff
pci 0000:00:03.0: PREFETCH window: 0x000000f8000000-0x000000f87fffff
pci 0000:00:13.0: PCI bridge, secondary bus 0000:05
pci 0000:00:13.0: IO window: disabled
pci 0000:00:13.0: MEM window: 0xfa000000-0xfa0fffff
pci 0000:00:13.0: PREFETCH window: disabled
pci 0000:00:13.1: PCI bridge, secondary bus 0000:06
pci 0000:00:13.1: IO window: disabled
pci 0000:00:13.1: MEM window: 0xfa100000-0xfa1fffff
pci 0000:00:13.1: PREFETCH window: disabled
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:02.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:03.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:13.0: setting latency timer to 64
pci 0000:00:13.1: setting latency timer to 64
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffffffffffff]
bus: 01 index 0 mmio: [0, 0]
bus: 01 index 1 mmio: [f9000000, f9ffffff]
bus: 01 index 2 mmio: [c0000000, dfffffff]
bus: 01 index 3 mmio: [0, 0]
bus: 02 index 0 mmio: [0, 0]
bus: 02 index 1 mmio: [0, 0]
bus: 02 index 2 mmio: [0, 0]
bus: 02 index 3 mmio: [0, 0]
bus: 03 index 0 io port: [5000, 6fff]
bus: 03 index 1 mmio: [f8800000, f8ffffff]
bus: 03 index 2 mmio: [f8000000, f87fffff]
bus: 03 index 3 mmio: [0, 0]
bus: 05 index 0 mmio: [0, 0]
bus: 05 index 1 mmio: [fa000000, fa0fffff]
bus: 05 index 2 mmio: [0, 0]
bus: 05 index 3 mmio: [0, 0]
bus: 06 index 0 mmio: [0, 0]
bus: 06 index 1 mmio: [fa100000, fa1fffff]
bus: 06 index 2 mmio: [0, 0]
bus: 06 index 3 io port: [0, ffff]
bus: 06 index 4 mmio: [0, ffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
apm: BIOS not found.
audit: initializing netlink socket (disabled)
type=2000 audit(1233909530.240:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1765
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: VIA PCI bridge detected.Disabling DAC.
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:02.0: setting latency timer to 64
pcieport-driver 0000:00:02.0: found MSI capability
pci_express 0000:00:02.0:pcie00: allocate port service
pci_express 0000:00:02.0:pcie01: allocate port service
pci_express 0000:00:02.0:pcie02: allocate port service
pci_express 0000:00:02.0:pcie03: allocate port service
pcieport-driver 0000:00:03.0: setting latency timer to 64
pcieport-driver 0000:00:03.0: found MSI capability
pci_express 0000:00:03.0:pcie00: allocate port service
pci_express 0000:00:03.0:pcie01: allocate port service
pci_express 0000:00:03.0:pcie02: allocate port service
pci_express 0000:00:03.0:pcie03: allocate port service
aer 0000:00:02.0:pcie01: AER service couldn't init device: no _OSC support
aer 0000:00:03.0:pcie01: AER service couldn't init device: no _OSC support
vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 1875k, total 65536k
vesafb: mode is 800x600x16, linelength=1600, pages=31
vesafb: protected mode interface info at c000:aa1c
vesafb: pmi: set display start = c00caa6a, set palette = c00caaff
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
brd: module loaded
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
Using IPI No-Shortcut mode
registered taskstats version 1
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Freeing unused kernel memory: 364k freed
Switched to high resolution mode on CPU 0
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.4: irq 21, io mem 0xfa400000
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.27.10-desktop586-1mnb ehci_hcd
usb usb1: SerialNumber: 0000:00:10.4
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
uhci_hcd 0000:00:10.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 20, io base 0x00004c00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
Synaptics Touchpad, model: 1, fw: 6.3, id: 0x81a0b1, caps: 0xa04713/0x204000
input: SynPS/2 Synaptics TouchPad as /class/input/input0
usb 1-6: new high speed USB device using ehci_hcd and address 3
input: AT Translated Set 2 keyboard as /class/input/input1
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.27.10-desktop586-1mnb uhci_hcd
usb usb2: SerialNumber: 0000:00:10.0
uhci_hcd 0000:00:10.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 22, io base 0x00004c20
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.27.10-desktop586-1mnb uhci_hcd
usb usb3: SerialNumber: 0000:00:10.1
uhci_hcd 0000:00:10.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 21, io base 0x00004c40
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-6: configuration #1 chosen from 1 choice
usb 1-6: New USB device found, idVendor=0402, idProduct=5606
usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-6: Product: USB2.0 Camera
usb 1-7: new high speed USB device using ehci_hcd and address 4
usb 1-7: configuration #1 chosen from 1 choice
usb 1-7: New USB device found, idVendor=0bda, idProduct=8187
usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-7: Product: RTL8187_Wireless
usb 1-7: Manufacturer: Manufacturer_Realtek_RTL8187_
usb 1-7: SerialNumber: 0015AF9A91A0
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.27.10-desktop586-1mnb uhci_hcd
usb usb4: SerialNumber: 0000:00:10.2
uhci_hcd 0000:00:10.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:10.3: irq 23, io base 0x00004c60
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 3-2: new low speed USB device using uhci_hcd and address 2
usb 3-2: configuration #1 chosen from 1 choice
usb 3-2: New USB device found, idVendor=0458, idProduct=0046
usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.27.10-desktop586-1mnb uhci_hcd
usb usb5: SerialNumber: 0000:00:10.3
SCSI subsystem initialized
Driver 'sd' needs updating - please use bus_type methods
No dock devices found.
libata version 3.00 loaded.
sata_via 0000:00:0f.0: version 2.3
sata_via 0000:00:0f.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21
sata_via 0000:00:0f.0: routed to hard irq line 10
scsi0 : sata_via
scsi1 : sata_via
ata1: SATA max UDMA/133 cmd 0x4cb0 ctl 0x4ca4 bmdma 0x4c80 irq 21
ata2: SATA max UDMA/133 cmd 0x4ca8 ctl 0x4ca0 bmdma 0x4c88 irq 21
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-8: SAMSUNG HM121HI, LZ100-08, max UDMA7
ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM121HI LZ10 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
pata_via 0000:00:0f.1: version 0.3.3
pata_via 0000:00:0f.1: power state changed by ACPI to D0
scsi2 : pata_via
scsi3 : pata_via
ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4c90 irq 14
ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x4c98 irq 15
ata3.00: ATAPI: TSSTcorp CDDVDW TS-L632H, TMC0, max UDMA/33
ata3.00: configured for UDMA/33
scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L632H TMC0 PQ: 0 ANSI: 5
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
TomoyoLinux Mandatory Access Control disabled by default.
You need to install ccs-tools if you want to enable it.
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 2:0:0:0: Attached scsi generic sg1 type 5
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k
input: PC Speaker as /class/input/input2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: AC Adapter [AC] (off-line)
Linux agpgart interface v0.103
agpgart: Detected VIA P4M900 chipset
agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
Monitor-Mwait will be used to enter C-1 state
processor ACPI0007:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 16 throttling states)
Linux video capture interface: v2.00
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (37 C)
thermal LNXTHERM:02: registered as thermal_zone1
uvcvideo: Found UVC 1.00 device USB2.0 Camera (0402:5606)
uvcvideo: Using UVC_MAX_ISO_PACKETS=40
uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
input: USB2.0 Camera as /class/input/input3
ACPI: Thermal Zone [TZ0] (-73 C)
input: Power Button (FF) as /class/input/input4
acpi device:1b: registered as cooling_device1
input: Video Bus as /class/input/input5
ACPI: Power Button (FF) [PWRF]
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
input: Power Button (CM) as /class/input/input6
sdhci-pci 0000:06:04.1: SDHCI controller found [1524:0750] (rev 0)
sdhci-pci 0000:06:04.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
mmc0: SDHCI controller on PCI [0000:06:04.1] using PIO
sdhci-pci 0000:06:04.3: SDHCI controller found [1524:0751] (rev 0)
sdhci-pci 0000:06:04.3: PCI INT A -> GSI 17 (level, low) -> IRQ 17
mmc1: SDHCI controller on PCI [0000:06:04.3] using PIO
ACPI: Power Button (CM) [PWB]
ACPI: Battery Slot [BAT0] (battery present)
input: Sleep Button (CM) as /class/input/input7
via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
eth0: VIA Rhine II at 0x14800, 00:90:f5:69:c6:fd, IRQ 23.
eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link cde1.
ACPI: Sleep Button (CM) [SLPB]
input: Lid Switch as /class/input/input8
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: Lid Switch [LID]
ACPI: WMI: Mapper loaded
phy0: Selected rate control algorithm 'pid'
phy0: hwaddr 00:15:af:9a:91:a0, RTL8187vB (default) V1 + rtl8225
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
usbcore: registered new interface driver rtl8187
input: HID 0458:0046 as /class/input/input9
input,hidraw0: USB HID v1.10 Mouse [HID 0458:0046] on usb-0000:00:10.1-2
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
HDA Intel 0000:05:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:05:01.0: setting latency timer to 64
HDA Intel 0000:05:01.0: PCI: Disallowing DAC for device
Non-volatile memory driver v1.2
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@xxxxxxxxxx
EXT3 FS on sda5, internal journal
fuse init (API version 7.9)
loop: module loaded
Adding 2048248k swap on /dev/sda6. Priority:-1 extents:1 across:2048248k
vboxdrv: Trying to deactivate the NMI watchdog permanently...
vboxdrv: Successfully done.
vboxdrv: Found 1 processor cores.
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 2.0.2_OSE (interface 0x00090000).
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
uvcvideo: UVC non compliance - GET_MIN/MAX(PROBE) incorrectly supported. Enabling workaround.
uvcvideo: wCompQuality(130) : 0
uvcvideo: wCompQuality(131) : 100
eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
uvcvideo: wCompQuality(130) : 0
uvcvideo: wCompQuality(131) : 100
ADDRCONF(NETDEV_UP): wlan0: link is not ready
NET: Registered protocol family 17
ACPI Error (psargs-0358): [FLOF] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.PIB_.EC__._Q16] (Node f78172e8), AE_NOT_FOUND
eth0: no IPv6 routers present
ndiswrapper version 1.53 loaded (smp=yes, preempt=no)
usbcore: registered new interface driver ndiswrapper
hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
ACPI Exception (thermal-0469): AE_ERROR, ACPI thermal trip point state changed
Please send acpidump to linux-acpi@xxxxxxxxxxxxxxx
[20080609]
ACPI Error (psargs-0358): [FLOF] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.PIB_.EC__._Q16] (Node f78172e8), AE_NOT_FOUND
ACPI Error (psargs-0358): [FLOF] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0530): Method parse/execution failed [\_SB_.PCI0.PIB_.EC__._Q16] (Node f78172e8), AE_NOT_FOUND
usb 1-3: new high speed USB device using ehci_hcd and address 5
usb 1-3: configuration #1 chosen from 1 choice
usb 1-3: New USB device found, idVendor=0951, idProduct=1607
usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-3: Product: DataTraveler 2.0
usb 1-3: Manufacturer: Kingston
usb 1-3: SerialNumber: 0019E02CB6EB5C880F06001E
Initializing USB Mass Storage driver...
scsi4 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
scsi 4:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2
sd 4:0:0:0: [sdb] 3905407 512-byte hardware sectors (2000 MB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 0b 00 00 08
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] 3905407 512-byte hardware sectors (2000 MB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 0b 00 00 08
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 4:0:0:0: [sdb] Attached SCSI removable disk
sd 4:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
usb 1-3: USB disconnect, address 5
Module Size Used by
nls_iso8859_1 7936 0
nls_cp437 9600 0
vfat 14464 0
fat 51616 1 vfat
usb_storage 109892 0
ndiswrapper 187164 0
af_packet 21120 2
ipv6 251044 10
vboxdrv 66328 0
binfmt_misc 12424 1
loop 18444 0
fuse 55196 4
dm_mod 55240 0
nvram 11404 0
snd_hda_intel 421660 5
snd_hwdep 10884 1 snd_hda_intel
snd_seq_dummy 6660 0
snd_seq_oss 33664 0
snd_seq_midi_event 10240 1 snd_seq_oss
snd_seq 51312 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 10252 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss 41760 0
snd_pcm 72836 3 snd_hda_intel,snd_pcm_oss
snd_timer 23816 2 snd_seq,snd_pcm
snd_page_alloc 11784 2 snd_hda_intel,snd_pcm
snd_mixer_oss 18304 1 snd_pcm_oss
arc4 5760 2
snd 52772 18 snd_hda_intel,snd_hwdep,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
ecb 6656 2
soundcore 10080 1 snd
crypto_blkcipher 19588 1 ecb
shpchp 33556 0
via_rhine 25352 0
wmi 9640 0
sdhci_pci 11136 0
battery 14212 0
sdhci 18692 1 sdhci_pci
button 10000 0
video 20240 0
output 6656 1 video
i2c_viapro 11540 0
serio_raw 9220 0
i2c_core 24212 1 i2c_viapro
uvcvideo 59656 0
compat_ioctl32 5120 1 uvcvideo
thermal 19100 0
videodev 35840 1 uvcvideo
v4l1_compat 18052 2 uvcvideo,videodev
processor 37292 1 thermal
via_agp 12032 1
agpgart 32840 1 via_agp
ac 8068 0
joydev 13888 0
usbhid 50368 0
ff_memless 8840 1 usbhid
rtl8187 48256 0
pci_hotplug 29216 1 shpchp
mac80211 157084 1 rtl8187
eeprom_93cx6 5888 1 rtl8187
pcspkr 6400 0
evdev 13344 8
cfg80211 27144 2 rtl8187,mac80211
rtc_cmos 13472 0
sr_mod 18884 0
mmc_core 49180 1 sdhci
mii 8576 1 via_rhine
sg 34864 0
pata_via 11908 0
sata_via 11396 4
libata 156960 2 pata_via,sata_via
dock 11792 1 libata
sd_mod 37912 5
scsi_mod 138316 5 usb_storage,sr_mod,sg,libata,sd_mod
crc_t10dif 5760 1 sd_mod
ext3 128392 1
jbd 47124 1 ext3
uhci_hcd 26128 0
ohci_hcd 27280 0
ehci_hcd 38284 0
usbcore 138096 9 usb_storage,ndiswrapper,uvcvideo,usbhid,rtl8187,uhci_hcd,ohci_hcd,ehci_hcd
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry Mandriva Linux release 2009.0 (Official) for i586
Kernel 2.6.27.10-desktop586-1mnb on an i686 / kernel 2.6.27.10-desktop586-1mnb
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686, Mandriva Linux release 2009.0 (Official) for i586
Kernel 2.6.27.10-desktop586-1mnb on an i686 /
Linux version 2.6.27.10-desktop586-1mnb (qateam@xxxxxxxxxxxxxxxxxx) (gcc version 4.3.2 (GCC) ) #1 SMP Thu Jan 29 10:40:00 EST 2009
scanModem update of: 2009_02_04
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
snd_hda_intel
Attached USB devices are:
ID 0bda:8187 Realtek Semiconductor Corp.
ID 0402:5606 ALi Corp.
ID 1d6b:0002
ID 1d6b:0001
ID 1d6b:0001
ID 0458:0046 KYE Systems Corp. (Mouse Systems)
ID 1d6b:0001
ID 1d6b:0001
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx
For candidate card in slot 05:01.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
05:01.0 1106:3288 1106:3288 Audio device: VIA Technologies, Inc. VT1708/A [Azalia HDAC]
Modem interrupt assignment and sharing:
17: 27998 IO-APIC-fasteoi mmc0, mmc1, HDA Intel
--- Bootup diagnostics for card in PCI slot 05:01.0 ----
PCI: 0000:05:01.0 reg 10 64bit mmio: [fa000000, fa003fff]
pci 0000:05:01.0: PME# supported from D0 D3hot D3cold
pci 0000:05:01.0: PME# disabled
HDA Intel 0000:05:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:05:01.0: setting latency timer to 64
HDA Intel 0000:05:01.0: PCI: Disallowing DAC for device
The PCI slot 05:01.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.
The ALSA verion is 1.0.18
The modem cards detected by "aplay -l" are:
card 0: VT82xx [HDA VIA VT82xx], device 6: Si3054 Modem [Si3054 Modem]
The /proc/asound/pcm file reports:
-----------------------
00-00: VT1708 Analog : VT1708 Analog : playback 1 : capture 2
00-01: VT1708 Digital : VT1708 Digital : playback 1
00-06: Si3054 Modem : Si3054 Modem : playback 1 : capture 1
about /proc/asound/cards:
------------------------
0 [VT82xx ]: HDA-Intel - HDA VIA VT82xx
HDA VIA VT82xx at 0xfa000000 irq 17
PCI slot 05:01.0 has a High Definition Audio Card
The drivers are in the kernel modules tree at:
The modem codec file for the HDA card is: /proc/asound/card0/codec#1
--------------------------------------------------------
Codec: Motorola Si3054
Address: 1
Vendor Id: 0x10573055
Subsystem Id: 0x10573055
Revision Id: 0x100700
Modem Function Group: 0x1
The audio card hosts a softmodem chip: 0x10573055
The softmodem chip 0x10573055 is in principle supported by the COMM support of slmodemd
and the joint snd-hda-intel audio+modem driver, begun with ALSA version 1.0.13.
For HDA cards with ALC883 chips, an upgrade to ALSA verions 1.0.15 way be necessary. Instructions for Upgrading snd-hda-intel and its dependent driver set are at:
http://linmodems.technion.ac.il/bigarch/archive-eighth/msg00838.html
If not a Conexant modem, the driver snd-hda-intel with its dependent drivers:
snd_hda_intel 421660 5
snd_hwdep 10884 1 snd_hda_intel
snd_pcm 72836 3 snd_hda_intel,snd_pcm_oss
snd_page_alloc 11784 2 snd_hda_intel,snd_pcm
snd 52772 18 snd_hda_intel,snd_hwdep,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
----------
provide audio + modem support with the modem chip residing on the subsystem.
Any particular card can host any one of several soft modem chips.
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 05:01.0:
Modem chipset detected on
NAME="Audio device: VIA Technologies, Inc. VT1708/A [Azalia HDAC] "
CLASS=0403
PCIDEV=1106:3288
SUBSYS=1106:3288
IRQ=17
HDA=1106:3288
SOFT=1106:3288.HDA
CHIP=0x10573055
IDENT=slmodemd
SLMODEMD_DEVICE=hw:0,6
Driver=snd-hda-intel
For candidate modem in: 05:01.0
0403 Audio device: VIA Technologies, Inc. VT1708/A [Azalia HDAC]
Primary device ID: 1106:3288
Subsystem PCI_id 1106:3288
Softmodem codec or chipset from diagnostics: 0x10573055
from Archives:
The HDA card softmodem chip is 0x10573055
Support type needed or chipset: slmodemd supporting the snd-hda-intel audio+modem driver
Pending fixes to gcc-4.3, temporarily use instead of SLMODEMD.gcc4.3.tar.gz, use
SLMODEMD_gcc4.2_alsa1.0.17.tar.gz
An ALSA (Advanced Linux Sound Architecture) modem driver: snd-hda-intel
provides Low Level support enabling contact with the modem hardware.
For all BUT Conexant chip soft modems (using hsfmodem software)
complementary High Level support is through a Smartlink utility: slmodemd
Download from http://linmodems.technion.ac.il/packages/smartlink/
the package SLMODEMD_gcc4.2_alsa1.0.17.tar.gz having a compiled slmodemd. Unpack under Linux with:
$ tar zxf SLMODEMD_gcc4.2_alsa1.0.17.tar.gz
and read instructions therein. But briefly, the modem is setup with command:
slmodemd -c YOUR_COUNTRY --alsa hw:0,6
reporting dynamic creation of ports:
/dev/ttySL0 --> /dev/pts/N , with N some number
Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through guidance.
----------------end Softmodem section --------------
Writing DOCs/Smartlink.txt
============ end Smartlink section =====================
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.3.2
and the compiler used in kernel assembly: 4.3.2
linux-headers-2.6.27.10-desktop586-1mnb resources needed for compiling are not manifestly ready!
If compiling is necessary packages must be installed, providing:
kernel-source-2.6.27.10-desktop586-1mnb
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking settings of: /etc/ppp/options
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 wlan0 wmaster0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
/etc/udev/rules.d/00-hsf.rules:KERNEL=="ttySHSF0", SYMLINK="modem"
/etc/udev/rules.d/00-hcfpci.rules:KERNEL=="ttySHCF0", SYMLINK="modem"
Within /etc/modprobe.conf files:
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
/etc/modules.conf:alias /dev/modem /dev/ttySHCF
/etc/modules.conf:alias /dev/modem /dev/ttySHSF
--------- end modem support lines --------
--- End Message ---
