Bart, The drivers likely aren't loaded, or there should be an /dev/ttySAGR for wvdialconf to fine. It is the agrsm-tools which provides for this symbolic link Make sure your boot is into 2.6.27-9-generic Either $ sudo agrsm-test or $ modprobe agrserial $ ls -l /dev/ttySAGR before the wvdialconf Marv S On Wed, Jan 7, 2009 at 7:39 AM, Bart Verbeek <ahverbeek@xxxxxxxxx> wrote: > Thanks MarvS, > I've installed those deb's and did some testing with: > sudo wvdialconf /etc/wvdial.conf > If I do this I get an output like this: > A failure will include lines like: > ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud > ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud > ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. > Modem Port Scan<*1>: S1 S2 S3 > > At that point the system hangs totally! Not even the SysRq is > responding! > > Would pci=noacpi in Grub fix this? > Bart > > > Op woensdag 07-01-2009 om 07:04 uur [tijdzone -0500], schreef Marvin > Stodolsky: >> Bart >> >> from http://phep2.technion.ac.il/linmodems/packages/ltmodem/11c11040/ get >> agrsm-2.6.27-9-generic_2.6.27-9.14_i386.deb and agrsm-tools_0.0.1_all.deb >> >> Coinstall with: >> $ sudo dpkg -i agrsm*.deb >> >> There will be troubleshooting instructions in >> /usr/share/doc/agrsm-tools/usage.txt >> >> There has been service of modems >> Communication controller: Agere Systems Device 0620" >> PCIDEV=11c1:0620 >> modems under 2.6.24 kernels. Report back presently. >> >> scanModem should have output this info automatically. >> I may send you an update to test. >> >> MarvS >> scanModem maintainer >> >> >> On Wed, Jan 7, 2009 at 6:31 AM, Bart Verbeek <ahverbeek@xxxxxxxxx> wrote: >> > Hi, >> > I've read here: >> > http://www.nabble.com/11c1:0620-or-11c1:048c-or-11c1:048f-td20592361.html >> > That possibly there is a .deb file available to get this modem working >> > on Ubuntu?! >> > Would someone please help me with this modem? >> > >> > scanout.02:05.0: >> > CLASS=0780 >> > NAME="Communication controller: Agere Systems Device 0620" >> > PCIDEV=11c1:0620 >> > SUBSYS=11c1:0620 >> > IRQ=11 >> > HDA= >> > CodecDiagnosed= >> > slamrTest= >> > CodecClass= >> > IDENT=SV2P >> > SLMODEMD_DEVICE= >> > OPTS= >> > Driver=agrmodem+agrserial >> > DRIVER=agrmodem+agrserial >> > >> > Kind regards, >> > Bart Verbeek >> > > >
